Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation and experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Blind Modeling Validation Exercises Using the Horizontal Dry Cask Simulator

The U.S. Department of Energy (DOE) established a need to understand the thermal-hydraulic properties of dry storage systems for commercial spent nuclear fuel (SNF) in response to a shift towards the storage of high-burnup (HBU) fuel (> 45 gigawatt days per metric ton of uranium, or GWd/MTU). This shift raises concerns regarding cladding integrity, which faces increased risk at the higher temperatures within spent fuel assemblies present within HBU fuel compared to low-burnup fuel (≤ 45 GWd/MTU). A dry cask simulator (DCS) was built at Sandia National Laboratories (SNL) in Albuquerque, New Mexico to produce validation-quality data that can be used to test the accuracy of the modeling used to predict cladding temperatures. These temperatures are critical to evaluating cladding integrity throughout the storage cycle of commercial spent nuclear fuel. A model validation exercise was previously carried out for the DCS in a vertical configuration. Lessons learned during the previous validation exercise have been applied to a new, blind study using a horizontal dry cask simulator (HDCS). Three modeling institutions – the Nuclear Regulatory Commission (NRC), Pacific Northwest National Laboratory (PNNL), and Empresa Nacional del Uranio, S.A., S.M.E. (ENUSA) – were granted access to the input parameters from the DCS Handbook, SAND2017-13058R, and results from a limited data set from the horizontal BWR dry cask simulator tests reported in the HDCS update report, SAND2019-11688R. With this information, each institution was tasked to calculate peak cladding temperatures and air mass flow rates for ten HDCS test cases. Axial as well as vertical and horizontal transverse temperature profiles were also calculated. These calculations were done using modeling codes (ANSYS/Fluent, STAR-CCM+, or COBRA-SFS), each with their own unique combination of modeling assumptions and boundary conditions. For this validation study, the ten test cases of the horizontal dry cask simulator were defined by three independent variables – fuel assembly decay heat (0.5 kW, 1 kW, 2.5 W, and 5 kW), internal backfill pressure (100 kPa and 800 kPa), and backfill gas (helium and air). The plots provided in Chapter 3 of this report show the axial, vertical, and horizontal temperature profiles obtained from the dry cask simulator experiments in the horizontal configuration and the corresponding models used to describe the thermal-hydraulic behavior of this system. The tables provided in Chapter 3 illustrate the closeness of fit of the model data to the experiment data through root mean square (RMS) calculations of the error in peak cladding temperatures (PCTs), PCT axial locations, axial temperature profiles, vertical and horizontal temperature profiles at two different axial locations, and air mass flow rates for the ten test cases, normalized by the experimental results. The model results are assigned arbitrary model numbers to retain anonymity. Due to the relatively flat axial temperature profiles, small temperature gradients resulted in large deviations of all models’ PCT axial location from the experimental PCT axial location. When the PCT axial location error is excluded in the calculation of the combined RMS of the normalized errors that considers PCT, the temperature profiles, and the air mass flow rates, the model data fits the experimental data to within 5%. When the vault information is excluded, the model data fits the experimental data to within 2.5%. An error analysis was developed further for one model, using the model and experimental uncertainties in each validation parameter to calculate validation uncertainties. The uncertainties for each parameter were used to define quantifiable validation criteria. For this analysis, the model was considered validated for a given comparison metric if the normalized error in that metric divided by the validation uncertainty was less than or equal to 1. When considering the combined RMS of the normalized errors of all metrics divided by their validation uncertainties, the model was found to have satisfied the criterion for model validation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Ionization-Based Optical Structures for the Control of Short-Pulse Lasers (Full LDRD Report)

High-power lasers require enormous beam sizes to avoid optics damage; without plasma control of light, future higher-power systems will have prohibitive costs. The laser-induced formation of ionization patterns in gases provides an opportunity to manipulate the spatial and temporal properties of femtosecond to picosecond beams with precise control at high intensity, providing a path towards compact multi-petawatt lasers. In this project, we proposed new concepts of diffractive optics elements relying on ionization-based structures, including a holographic lens and a compression grating. The theoretical characterization of these optical elements was supported by particle-in-cell simulations. Experiments have been carried out to achieve reflective elements (i.e., plasma-based gratings) that demonstrated high robustness and efficiencies on the order of 50%, which validates the feasibility of our new concepts and paves the way for future plasma-based high-power laser systems.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

FuSED Users Manual, 5.24

The Fusion of Simulation, Experiment, and Data (FuSED) team provides a set of tools for solving inverse problems in structural dynamics and thermal physics, and also sensor placement optimization via Optimal Experimental Design (OED). These methods are used for designing experiments, model calibration, and verification/validation analysis of systems. This document provides a user’s guide to the input for the three apps that are supported for these methods. Details of input specifications, output options, and optimization parameters are included.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

FuSED – Users Manual – (V.5.26)

The Fusion of Simulation, Experiment, and Data (FuSED) team provides a set of tools for solving inverse problems in structural dynamics (InverseSD) and thermal physics (InverseAria), a sensor placement optimization tool via Optimal Experimental Design (OED), and a decision boundary tool using SVMs (TRACE). These methods are used for designing experiments, model calibration, and verification/validation analysis of systems. This document provides a user’s guide.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Leveraging ARM Data to Improve Models for Predictive Understanding of Energy and Security Challenges

Extreme weather and natural hazards can disrupt the energy sector, affecting demand, generation, transmission, distribution, consumption and operational planning at regional and national scales. These disruptions stem from a broad range of atmospheric phenomena, including winter storms, freezing rain, wet snow loading, severe convection, flooding and landslides, wildfires, prolonged heat, and drought. Many of these same phenomena can also affect national security through impacts to transportation and infrastructure. To support the U.S. Department of Energy (DOE) focus on energy resilience and national security, the Atmospheric Radiation Measurement (ARM) User Facility is uniquely positioned to contribute measurement data, analyses, and modeling frameworks that can significantly improve predictive understanding of these hazards to mitigate their effects. To explore this opportunity, ARM convened a two-part virtual workshop in November 2025. The workshop engaged interdisciplinary experts in atmospheric science, energy systems, modeling, and operations. The goal of the meeting was to engage with these interdisciplinary experts to address three questions: • What are examples of atmospheric processes that represent significant risks to energy security or national security and where are those risks greatest? • What measurements or measurement strategies would improve ARM’s capacity to address these issues? • How can ARM and users of the ARM facility better work with the Energy Exascale Earth System Model (E3SM) and multi-sector modeling communities to apply ARM data to improving E3SM simulations of these phenomena? Participants were asked to submit white papers ahead of the meeting to initiate thinking on these themes and to help organize discussions. Workshop sessions were then organized around themes identified in the white papers. First from the white papers and then through subsequent discussions, workshop participants identified many examples that address the three questions listed above. Participants called out energy system vulnerabilities to weather phenomena such as the impact of freezing rain, strong winds, and excessive heat on power grids. They also noted the effects that weather phenomena could have on energy demand or supply (e.g., through effects of extreme temperatures). They called out security vulnerabilities such as impacts to crops from aerosol-borne pathogens and risks to industry due to melting permafrost in the Arctic. In all, over a dozen meteorological phenomena were linked to energy or security vulnerabilities. For many of the identified phenomena, participants pointed out where ARM was well poised to address issues (e.g., through measurements of cloud microphysics to inform studies of freezing rain) but also noted needs for additional measurements or modified measurement strategies. For example, adaptive scanning of severe weather would be valuable for probing winter storms or severe convection. Participants pointed out the value in integrating external observations with ARM measurements and with applying artificial intelligence (AI) to ARM observation analysis and they advocated for using model simulations to help optimize measurement strategies through Observing System Simulation Experiments (OSSEs). It was clear from the workshop that there are many ways that ARM observations can be used to mitigate energy and security concerns, but meeting participants were also asked to identify what they considered to be the greatest opportunities by ranking issues pertaining to the three workshop questions. This was accomplished through a survey administered to participants between the two virtual sessions. The highest-priority phenomena identified were winter storms, severe convection, and arctic processes. Discussion in the second session, therefore, focused primarily on these three areas, which were most fully developed in exploring ARM opportunities. Nevertheless, it was also clear that ARM has opportunities to contribute to all the identified topics. This report describes the workshop, including input from discussion and white papers (Sections 2 and 3) and a list of priority recommendations (section 4). Many other ideas for ARM contributions are discussed in individual white papers (Appendix D).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Assessing the limitations of commercial sensors and models for supporting marine carbon dioxide removal monitoring: a case study

Several unknowns remain surrounding marine Carbon Dioxide Removal (mCDR) monitoring, reporting, and verification (MRV) practices and capabilities. Current in-situ sensor technology is limited (primarily pH and pCO 2 ), requiring calculations and assumptions to estimate changes in carbonate chemistry parameters, including total alkalinity (TA). Considering that cost, energy consumption, and accuracy of commercial sensors can vary by orders of magnitude, understanding how well existing sensors perform in an mCDR context is important for this emerging community. Likewise, documenting sensor limitations and how relatively simple models can optimize sensor deployments will improve MRV efforts and support protocol development. Here we (1) compare performance a variety of commercially available sensors in a blind mesocosm experiment simulating ocean alkalinity enhancement (OAE), and how sensor performance impacted carbonate chemistry estimates; (2) evaluate if sensors can distinguish the OAE signal from natural variability during a small scale OAE field test in Sequim Bay, WA, USA, and (3) use an idealized ocean biogeochemistry model to explore optimal sensor network design based on (1) and (2). Our mesocosm results indicate that correctly constraining pH uncertainty will be critical for accurate TA estimates with current sensor technology compared to the less impactful variation caused by uncertainty in pCO 2 (pH data that are presented throughout are reported on the total scale (pH T ) unless otherwise noted). Our pilot field test demonstrated that sensors were capable of distinguishing mCDR signatures from natural variability under optimal real-world conditions. Idealized modeling simulations of the field test showed that a range of sparse and dense (3 to 100) sensors sampling areas of detectable increases will underestimate the net change in surface pH by at least 35–55%, at both realistic and highly elevated alkalinity input levels. We also highlight the limitations of current sensing technology for MRV, and the importance of ocean biogeochemistry models as critical tools for predicting when and where mCDR signals will be detectable using available sensors. Overall, our findings suggest that commercially available pCO 2 sensors and some pH sensors will form an important backbone for mCDR MRV tasks, though complete MRV characterization will require these data to be used in combination with other tools.

OAE↗
DOE OSTI2020

The Impact of Surficial Biochar Treatment on Acute H2S Emissions during Swine Manure Agitation before Pump-Out: Proof-of-the-Concept

Acute releases of hydrogen sulfide (H2S) are of serious concern in agriculture, especially when farmers agitate manure to empty storage pits before land application. Agitation can cause the release of dangerously high H2S concentrations, resulting in human and animal fatalities. To date, there is no proven technology to mitigate these short-term releases of toxic gas from manure. In our previous research, we have shown that biochar, a highly porous carbonaceous material, can float on manure and mitigate gaseous emissions over extended periods (days–weeks). In this research, we aim to test the hypothesis that biochar can mitigate H2S emissions over short periods (minutes–hours) during and shortly after manure agitation. The objective was to conduct proof-of-the-concept experiments simulating the treatment of agitated manure. Two biochars, highly alkaline and porous (HAP, pH 9.2) made from corn stover and red oak (RO, pH 7.5), were tested. Three scenarios (setups): Control (no biochar), 6 mm, and 12 mm thick layers of biochar were surficially-applied to the manure. Each setup experienced 3 min of manure agitation. Real-time concentrations of H2S were measured immediately before, during, and after agitation until the concentration returned to the initial state. The results were compared with those of the Control using the following three metrics: (1) the maximum (peak) flux, (2) total emission from the start of agitation until the concentration stabilized, and (3) the total emission during the 3 min of agitation. The Gompertz’s model for determination of the cumulative H2S emission kinetics was developed. Here, 12 mm HAP biochar treatment reduced the peak (1) by 42.5% (p = 0.125), reduced overall total emission (2) by 17.9% (p = 0.290), and significantly reduced the total emission during 3 min agitation (3) by 70.4%. Further, 6 mm HAP treatment reduced the peak (1) by 60.6%, and significantly reduced overall (2) and 3 min agitation’s (3) total emission by 64.4% and 66.6%, respectively. Moreover, 12 mm RO biochar treatment reduced the peak (1) by 23.6%, and significantly reduced overall (2) and 3 min total (3) emission by 39.3% and 62.4%, respectively. Finally, 6 mm RO treatment significantly reduced the peak (1) by 63%, overall total emission (2) by 84.7%, and total emission during 3 min agitation (3) by 67.4%. Biochar treatments have the potential to reduce the risk of inhalation exposure to H2S. Both 6 and 12 mm biochar treatments reduced the peak H2S concentrations below the General Industrial Peak Limit (OSHA PEL, 50 ppm). The 6 mm biochar treatments reduced the H2S concentrations below the General Industry Ceiling Limit (OSHA PEL, 20 ppm). Research scaling up to larger manure volumes and longer agitation is warranted.

Chen, Baitong (ORCID:0000000266071253)↗
DOE OSTI2025

A Fast Framework for Generating Radioactive Mixture Spectra and Its Application to Remote High-Performance Mixture Identification

Remote detection of radioactive materials in mixtures using handheld or portal detectors remains a challenge because of factors such as low concentration, environmental interference, sensor noise, and other complications. This work introduces a fast framework for generating realistic mixture spectra. Moreover, we present mixture isotope identification using data generated by the fast framework. Researchers have examined a range of conventional and recent algorithms within the fields of machine learning and deep learning. An application to uranium enrichment-level prediction has been included. Extensive simulation experiments validated the efficacy of the proposed framework.

GADRAS↗
DOE OSTI2023

Medium-Range Order Resists Deformation in Metallic Liquids and Glasses

In crystals, lattice defects, such as dislocations, control mechanical deformation. Similarly, it is widely believed that even in glasses and liquids some kinds of defects, strongly disordered regions, play a major role in deformation. To identify defects researchers focused on the nature of the short-range order (SRO) in the nearest neighbor cage of atoms. However, recent results by experiment, simulation and theory raise serious questions about this assumption. They suggest that the atomic medium-range order (MRO) provides resistance against flow at the atomic level. Because the MRO is a bulk property, it implies that defects play only a limited role. This new insight is supported by the density wave theory which shows that the MRO is driven by a top-down global force, rather than being a consequence of the SRO in the bottom-up manner, and the MRO provides stiffness to resist deformation. We briefly summarize the density wave theory, show that the MRO is related to ductility of metallic glasses, and discuss the implications on the role of the MRO in the atomic-level mechanism of deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

On the Viability of Video Imaging in Leak Rate Quantification: A Theoretical Error Analysis

Optical gas imaging through multispectral cameras is a promising technique for mitigation of methane emissions through localization and quantification of emissions sources. While more advanced cameras developed in recent years have led to lower uncertainties in measuring gas concentrations, a systematic analysis of the uncertainties associated with leak rate estimation have been overlooked. We present a systematic categorization of the involved uncertainties with a focus on a theoretical analysis of projection uncertainties that are inherent to this technique. The projection uncertainties are then quantified using Large Eddy Simulation experiments of a point source release into the atmosphere. Our results show that while projection uncertainties are typically about 5% of the emission rate, low acquisition times and observation of the gas plume at small distances from the emission source (<10 m) can amount to errors of about 20%. Further, we found that acquisition times on the order of tens of seconds are sufficient to significantly reduce (>50%) the projection uncertainties. These findings suggest robust procedures on how to reduce projection uncertainties, however, a balance between other sources of uncertainty due to operational conditions and the employed instrumentation are required to outline more practical guidelines.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

CV4Quantum: Reducing the Sampling Overhead in Probabilistic Error Cancellation Using Control Variates

Quasiprobabilistic decompositions (QPDs) play a key role in maximizing the utility of near-term quantum hardware. For example, Probabilistic Error Cancellation (PEC) (an error mitigation technique) and circuit cutting (which enables large quantum computations to be performed on quantum hardware with a limited number of qubits) both involve QPDs. Computations based on QPDs typically incur large sampling overheads that grow exponentially with the number of error-terms mitigated or number of circuit-cuts employed, limiting their practical feasibility. In this work, we adapt the control variates variance reduction technique from the statistics literature in order to reduce the sampling overhead in QPD-based computations. We demonstrate our method using simulation experiments that mimic a realistic PEC scenario. In our experiments, we observed a more than 50% reduction in the number of samples needed to achieve a given precision, in more than 50% of the PEC-based estimations performed in the study when using our approach. We discuss how future research on constructing good control variates can lead to even stronger sampling overhead reduction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Roadmap for warm dense matter physics

This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.

FOS: Physical sciences↗
DOE OSTI2026

Data for: A hybrid biophysical-machine learning framework for diurnal surface energy flux estimation using proximal sensing

Thermal-based remote sensing of surface energy fluxes has traditionally relied on high spatial resolution satellite data with revisit frequencies on the order of weeks. In this study, we evaluate a biophysics-based analytical surface energy balance model for predicting latent energy (LE) and sensible heat (H) fluxes using proximal sensing observations. The Surface Temperature Initiated Closure (STIC1.2) model has been extensively validated across a wide range of spatial and temporal scales using various satellite-derived thermal datasets. Here we extend this validation by applying STIC at sub-hourly temporal resolution over multiple growing seasons for four distinct agricultural systems. We further develop and evaluate novel STIC variants that incorporate machine learning (ML) techniques to eliminate the need for specific surface energy balance observations, specifically net radiation and soil heat flux, thereby enhancing model applicability in data-sparse settings. The integration of an ML component to estimate surface available energy is shown to have strong predictive performance for both LE (R2 = 0.81-0.94) and H (R2 = 0.46-0.72) across all agricultural systems examined here, demonstrating the potential of hybrid biophysical – machine learning approaches for surface energy balance modeling with minimal data requirements. This study concludes with a novel application of explainable machine learning (exML) to diagnose sources of model error. This exML framework attributes residual prediction errors to both model input variables and environmental drivers not explicitly included in the simulation experiments. This approach provides a new pathway for improving model design and integrating previously overlooked yet influential variables into future model iterations.

Agricultural Sciences↗
DOE OSTI2020

The Cloud-resolving model Radar SIMulator (CR-SIM) Version 3.3: description and applications of a virtual observatory

Ground-based observatories use multi-sensor observations to characterize cloud and precipitation properties. One of the challenges is how to design strategies to best use these observations to understand these properties and evaluate weather and climate models. This paper introduces the Cloud resolving model Radar SIMulator (CR-SIM), which uses output from high-resolution cloud resolving models (CRMs) to emulate multi-wavelength, zenith-pointing, and scanning radar observables and multi-sensor (radar and lidar) products. CR-SIM allows direct comparison between an atmospheric model simulation and remote-sensing products using a forward-modeling framework consistent with the microphysical assumptions used in the atmospheric model. CR-SIM has the flexibility to easily incorporate additional microphysical modules, such as microphysical schemes and scattering calculations, and expand the applications to simulate multi-sensor retrieval products. In this paper, we present several applications of CR-SIM for evaluating the representativeness of cloud microphysics and dynamics in a CRM, quantifying uncertainties in radar-lidar integrated cloud products and multi-Doppler wind retrievals, and optimizing radar sampling strategy using observing system simulation experiments. These applications demonstrate the application of CR-SIM as a virtual observatory operator on high-resolution model output for a consistent comparison between model results and observations to aid interpretation of the differences and improve understanding of the representativeness errors due to the sampling limitations of the ground-based measurements. CR-SIM is licensed under the GNU GPL package and both the software and the user guide are publicly available to the scientific community.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

PSTN-051: Survey Strategy and Cadence Choices for the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST)

A summary of survey strategy and cadence choices, simulated and evaluated by the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) Scheduler Team, prepared for the Survey Cadence and Optimization Committee (SCOC). A large telescope survey, covering the entire visible sky repeatedly every few days in multiple bandpasses over the course of ten years, is the core idea of the LSST. An area of about 20,000 square degrees observed under a wide range of conditions to deep coadded limiting magnitudes in bandpasses ugrizy enables cosmological studies and studies of the Milky Way structure with unprecedented precision; the same survey, when cadenced well, can serve to open new windows into our understanding of transient and variable stars, and extend our knowledge of small bodies throughout the Solar System by orders of magnitude. The outlines of, and some basic necessary requirements for these goals are outlined in the LSST Science Requirements Document (SRD). Finding options for the observing strategy to meet more detailed needs of an even wider range of science goals, as well as building the LSST Scheduler and Metrics Analysis Framework, has been the work of the LSST Scheduler Team with support and input from the astronomical community, including the Community Observing Strategy Evaluation Paper (COSEP), the Call for White Papers, numerous performance metrics, and guidance from the LSST Science Advisory Committee in their Recommendations for Operations Simulator Experiments. This report will help enable the SCOC to make its recommendation for the preferred survey strategy.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1964

Meteoroid impact on the lunar surface.

Simulation experiments to determine lunar surface reaction to lunar probe impact, noting impact flash, flash duration and emitted light spectrum

SPACE PROBE↗