Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STONES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Determination of meteor parameters using laboratory simulation techniques

Atmospheric entry of meteoritic bodies is conveniently and accurately simulated in the laboratory by techniques which employ the charging and electrostatic acceleration of macroscopic solid particles. Velocities from below 10 to above 50 km/s are achieved for particle materials which are elemental meteoroid constituents or mineral compounds with characteristics similar to those of meteoritic stone. The velocity, mass, and kinetic energy of each particle are measured nondestructively, after which the particle enters a target gas region. Because of the small particle size, free molecule flow is obtained. At typical operating pressures (0.1 to 0.5 torr), complete particle ablation occurs over distances of 25 to 50 cm; the spatial extent of the atmospheric interaction phenomena is correspondingly small. Procedures have been developed for measuring the spectrum of light from luminous trails and the values of fundamental quantities defined in meteor theory. It is shown that laboratory values for iron are in excellent agreement with those for 9 to 11 km/s artificial meteors produced by rocket injection of iron bodies into the atmosphere.

Friichtenicht, J. F.↗

Laboratory determination of the luminous efficiency of meteor constituents

A crossed beam apparatus has been used to measure the emission and ionization cross sections for the prominent spectral features of Na, Ca, Mg, and Fe in collisions with N2 and O2 over the velocity range of 30 to 120 km/s. From the emission and ionization cross sections, the absolute luminous efficiencies in air were determined over the range of meteor velocities. The maximum luminous efficiencies for the brightest features were: greater than 1 percent for the Na D-lines, 0.2 percent for the Ca I(2) singlet, 0.06 percent for the Mg I(2) and Mg I(3) triplets, and 0.4 percent for Fe over the visible spectral range. These luminous efficiencies are valid for free molecular flow conditions for velocities above about 30 km/s and are directly applicable to spectroscopic observations of faint meteors. In contrast to previous work, the luminous efficiency found for stone in the present investigation decreased with velocity above about 50 km/s.

Savage, H. F.↗

Ablation in meteors

A comparison of theoretical calculations with the results of radar meteor observations shows that the theory of radio meteors satisfactorily represents observational data. Radar meteor observations are incompatible with the idea of low density for small meteoroids in the ablation process. The main mechanism of ablation is evaporation. During intensive evaporation, small meteoroids have a density close to that of usual stone meteorites.

Lebedinets, V. N.↗

Apollo 16 soils - Grain size analyses and petrography

Soils from South Ray Crater, North Ray Crater, and the interray area of Station 10 have a similar provenance, containing breccia fragments of low to medium metamorphic grade and low light/dark lithic fragment ratios; these appear to be characteristic of the Cayley Formation. The primary difference between soils possibly derived from North Ray and South Ray craters is in the agglutinate content. A soil from Stone Mountain (Station 4) is characterized by breccia fragments of medium to high metamorphic grade and a high light/dark lithic fragment ratio; this soil may be derived from the Descartes Formation. Differences between the selenomorphic units, the Descartes and Cayley formations, may be lithologic as well as structural. The mean grain size varies from 84 to 280 microns, and all of the samples are poorly to very poorly sorted. There appears to be a relation between the sorting, grain size, and agglutinate content, with the finer-grained, better sorted soils containing more than 30% agglutinates. 'Shadowed' soils, collected close to large boulders, are similar in all respects to the 'reference' soils collected at least 5 m from the boulders.

Heiken, G. H.↗

On the origin of the solar system. I

The empirical information on protostars is reviewed. 'Globules' are described, found to have the typical range of stellar masses and with gaseous compositions now well known thanks largely to radio astronomy. They also contain particulate matter identified as silicates, ice, and probably graphite and other carbon compounds. Current knowledge of the degree of stability of the planetary orbits over the past 4.5 b.y. is summarized. The statistics on the frequency and masses of asteroids and information on the Kirkwood gaps, both empirical and theoretical, are cited. An analogous discussion is made for the Rings of Saturn, including its extension observed in 1966 to the fourth Saturn satellite, Dione. The three main classes of meteorites - irons, stones, and carbonaceous chondrites - all appear to be of asteroidal origin and they yield the most direct evidence on the early thermal history of the solar system. The author sees in this evidence definite confirmation of the cold origin of the planetary system, followed by a hot phase due to the evolving sun that caused the dissolution of the solar nebula.

Kuiper, G. P.↗

Stratigraphy of the Descartes region /Apollo 16/ - Implications for the origin of samples

Analysis of terrain in the Apollo 16 Descartes landing region shows a series of features that form a stratigraphic sequence which dominates the history and petrogenesis at the site. An ancient 150-km diam crater centered on the Apollo 16 site is one of the earliest recognizable major structures. Nectaris ejecta was concentrated in a regional low at the base of the back slope of the Nectaris basin to form the Descartes Mountains. Subsequently, a 60-km diam crater formed in the Descartes Mountains centered about 25 km to the west of the site. This crater dominates the geology and petrogenetic history of the site. Stone and Smoky Mountains represent the degraded terraced crater walls, and the dark matrix breccias and metaclastic rocks derived from North and South Ray craters represent floor fallback breccias from this cratering event. The interpretation is developed that the stratigraphy of the Cayley and Descartes, and thus the historical record of the Apollo 16 region, documents the complex interaction of deposits and morphology of local and regional impact cratering events. Large local 60- to 150-km diam craters have had a dramatic and previously unrecognized effect on the history and petrology of the Apollo 16 site.

Head, J. W.↗

Variability of the Al-26 production rate in ordinary chondrites

Fifteen ordinary chondrites for which unusually high spallogenic Ne-22/Ne-21 or He-3/Ne-21 ratios had been reported and one meteorite with marked shock characteristics were selected in order to investigate the relations between Ne-22/Ne-21 ratios, Al-26 contents and depth. We report Al-26 and K contents of 13 samples from 11 of these and noble gas contents of 30 samples from all of these stones.

Herzog, G. F.↗

Conservation and the industry sector

The following six highly energy intensive industries were studied as targets of energy conservation opportunity: food and kindred products, paper and allied products, chemicals and allied products, petroleum and coal products, stone, glass and clay products, and primary manufacturing. After studying conservation actions within each industry the actions were grouped under three broad categories: increased combustion efficiency, process improvement, and good housekeeping. Some of the results were: (1) approximately 2.18 quads could be saved in 1980 and 2.57 quads in 1985 by installing cogenerative facilities in 50% of the industries, (2) regenerative air-preheaters could result in a 10-15% increase in furnace efficiency representing a 15-25% fuel savings (2.3 to 3.9 quads in 1980 and 2.7 to 4.5 quads in 1985), (3) several major industries have potential for energy savings by recycling-aluminum (0.2 quads), steel (1 quad), glass (0.006 quads), paper and cement (0.08 quads).

Source record↗

A numerical study of the radiative-dynamic interaction in the stratosphere by a time-dependent zonal mean circulation model

The response of a zonal mean circulation model was compared to different heating functions used to simulate the interannual climate cycle. Two heating functions were used: A simple Newtonian heating function and a sophisticated heating function (Ramanathan, 1976). The emphasis was on the coupling between radiative transfer and the circulation in the stratosphere. The model was formulated in terms of primitive equations with 10 deg latitudinal resolution and 18 levels in pressure. Eddy transport of heat in the stratosphere was treated by the Reed and German (1965) formulation, while Stone's (1973) formulation is used in the troposphere. Momentum eddy fluxes are specified by climate statistics after Harwood and Pyle (1975). The model dynamics resulting from the two runs are compared to demonstrate the benefits of using detailed heating functions.

Turner, R. E.↗

Fireball end heights - A diagnostic for the structure of meteoric material

An earlier analysis of Prairie Network fireball trajectory data failed to discriminate between the varieties of meteoric materials that are thought to be present. The Lost City meteorite event offers another calibration of the fireball data and prompts a reanalysis intended to distinguish between ordinary chondritic meteorites and the more fragile early-type carbonaceous chondrites. The carbonaceous material is expected to ablate more readily and have shorter trajectories or higher end heights. Observational error and natural dispersion in the structures produce severe smoothing effects, and the end-height diagnostic is, in itself, not entirely convincing. However, after making a tentative division of the data, one can discern differences in orbits and beginning heights among the three end-height groups. These are consistent with expectations of the behavior of chondritic stones (group I), weak carbonaceous chondrites (group II), and still more fragile cometary material (group III). It is concluded that if the carbonaceous material occurs in reasonable abundance among the fireballs, it has been properly identified by this analysis.

Ceplecha, Z.↗

The next 25 years: Industrialization of space - Rationale for planning

A methodology for planning the industralization of space is discussed. The suggested approach combines the extrapolative ('push') approach, in which alternative futures are projected on the basis of past and current trends and tendencies, with the normative ('pull') view, in which an ideal state in the far future is postulated and policies and decisions are directed toward its attainment. Time-reversed vectors of the future are tied to extrapolated, trend-oriented vectors of the quasi-present to identify common plateaus or stepping stones in technological development. Important steps in the industrialization of space to attain the short-range goals of production of space-derived energy, goods and services and the long-range goal of space colonization are discussed.

Von Puttkamer, J.↗

Comparison of lunar rocks and meteorites: Implications to histories of the moon and parent meteorite bodies

There are many similarities between lunar samples and stone meteorites. Lunar samples, especially from the highlands, indicate that they have been affected by complex and repeated impact processes. Similar complex and repeated impact processes have also been operative on the achondritic and chondritic meteorites. Similarities between lunar and meteoritic rocks are discussed as follows: (1) Monomict and polymict breccias occur in lunar rocks, as well as in achondritic and chondritic meteorites, having resulted from complex and repeated impact processes; (2) Chondrules are present in lunar meteorites, as well as in a few achondritic and most chondritic meteorites. They apparently crystallized spontaneously from molten highly supercooled droplets which may have formed from impact melts or, perhaps, volcanic processes (as well as from the solar nebula, in the case of meteoritic chondrites); (3) Lithic fragments vary from little modified (relative to the apparent original texture) to partly or completely melted and recrystallized lithic fragments. Their detailed study allows conclusions to be drawn about their parent rock types and their origin, thereby gaining insight into preimpact histories of lunar and meteoritic breccias. There is evidence that cumulate rocks were involved in the early history of both moon and parent meteorite bodies.

Prinz, M.↗

The next 25 years: Industrialization of space: Rationale for planning

The goals of NASA's space industralization program include contributing to increased productivity on earth without taxing the environment, generating new values through extraterrestrial productivity, and providing new growth options for the future which include the permanent settlement of space and long-range colonization and exploration projects. In planning the long-range space program based on essentially utilitarian aspects, without losing sight of the more humanistically significant long term, and to forecast associated technology requirements, a realistic approach is obtained by combining extrapolative and normative planning modes so that common stepping stones can be identified. In the extrapolative view, alternative futures are projected on the basis of past and current trends and tendencies. In the normative view, some ideal state in the far future is envisioned or postulated, and policies and decisions are directed toward its attainment.

Vonputtkamer, J.↗

The Inman, McPherson County, Kansas meteorite

The Inman meteorite (find, 1966) is a single relatively unweathered stone of 7.25 kg that contains fresh metal and only a few weathering products away from fractures. It has a pronounced chondritic texture, with 38 vol% of the meteorite being made up of chondrules of virtually all textural types. The recalculated bulk analysis, in particular ratios involving iron content, indicate that Inman is an L-group chondrite. The pronounced chondritic texture; the compositional variation of olivine, pyroxene, chromite, and ilmenite; and the presence of a fine-grained nearly opaque matrix, glass, and twinned monoclinic low-Ca pyroxene indicate that the chondrite belongs to petrologic type 3.

Keil, K.↗

A programmable power processor for a 25-kW power module

A discussion of the power processor for an electrical power system for a 25-kW Power Module that could support the Space Shuttle program during the 1980's and 1990's and which could be a stepping stone to future large space power systems is presented. Trades that led to the selection of a microprocessor-controlled power processor are briefly discussed. Emphasis is given to the power processing equipment that uses a microprocessor to provide versatility that allows multiple use and to provide for future growth by reprogramming output voltage to a higher level (to 120 V from 30 V). Efficiency data from a breadboard programmable power processor are presented, and component selection and design considerations are also discussed.

Lanier, R., Jr.↗

Simulated hail impact testing of photovoltaic solar panels

Techniques used to simulate and study the effect of hail on photovoltaic solar panels are described. Simulated hail stones (frozen ice spheres projected at terminal velocity) or steel balls were applied by air guns, gravity drop, or static loading. Tests with simulated hail and steel balls yielded different results. The impact strength of 10 commercially available flat-plate photovoltaic modules was tested. It was found that none of the six panel designs incorporating clear potting silicone material as the outermost layer remained undamaged by 1-in. simulated hailstones, while a photovoltaic module equipped with a 0.188-in.-thick acrylic cover sheet would be able to withstand the impact of a 2-in.-diameter hailstone.

Moore, D.↗