Flow-enhanced solution printing of all-polymer solar cells
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Delafossite oxides are promising hole transport layer (HTL) candidates for perovskite solar cells, due to their wide band gap, favorable energy band alignment relative to the perovskite absorber and simplicity of processing. In this paper, we investigate the properties of CuCrO2 (CCO) delafossite films using an integration of experimental and computational techniques. Phase-pure CCO films are deposited at room temperature by spin-casting suspensions of hydrothermally-synthesized nanoparticles, for use in a glass/ITO/CCO/CH3NH3PbI3/C60/BCP/Ag device structure. Although density functional theory (DFT) calculations predict an elevated hole effective mass along certain crystallographic directions, the nearly isotropic shape and small size of the CCO nanoparticles preserves transport properties within the films by randomizing particle orientation, preventing these unfavorable directions from dominating the film conductivity. Experimental measurements confirm that the CCO films display appropriate optical and electrical properties for use as an HTL, in good agreement with the DFT calculations. Solar cells made using these films exhibit stabilized power conversion efficiencies exceeding 14%, with only minor hysteresis in the current–voltage characteristics.
Illustration of hot hole transfer through interfacial S–Pb interactions, and a peak efficiency of 27.30% was achieved under 5.9 suns via ultrafast hot hole extraction.
We demonstrate, by numerical solution of Maxwell's equations, near-perfect solar light-trapping and absorption over the 300–1100 nm wavelength band in silicon photonic crystal (PhC) architectures, amenable to fabrication by wet-etching and requiring less than 10 μm (equivalent bulk thickness) of crystalline silicon. These PhC's consist of square lattices of inverted pyramids with sides comprised of various (111) silicon facets and pyramid center-to-center spacing in the range of 1.3–2.5 μm. For a wet-etched slab with overall height H = 10 μm and lattice constant a = 2.5 μm, we find a maximum achievable photo-current density (MAPD) of 42.5 mA/cm{sup 2}, falling not far from 43.5 mA/cm{sup 2}, corresponding to 100% solar absorption in the range of 300–1100 nm. We also demonstrate a MAPD of 37.8 mA/cm{sup 2} for a thinner silicon PhC slab of overall height H = 5 μm and lattice constant a = 1.9 μm. When H is further reduced to 3 μm, the optimal lattice constant for inverted pyramids reduces to a = 1.3 μm and provides the MAPD of 35.5 mA/cm{sup 2}. These wet-etched structures require more than double the volume of silicon, in comparison to the overall mathematically optimum PhC structure (consisting of slanted conical pores), to achieve the same degree of solar absorption. It is suggested these 3–10 μm thick structures are valuable alternatives to currently utilized 300 μm-thick textured solar cells and are suitable for large-scale fabrication by wet-etching.
The aim of this work is to calculate the dose released by galactic cosmic rays (GCRs) and solar energetic particles (SEPs) in the polarimeter of the Multi Element Telescope for Imaging and Spectroscopy (METIS) coronagraph [1] aboard the Solar Orbiter. This investigation is performed with a Monte Carlo method by considering the role of SEP events of proper intensity at a heliocentric distance from the Sun averaged along the spacecraft orbit. Our approach can be extended to other space missions reaching short distances from the Sun, such as Solar Probe Plus. This study indicates that the deposited dose on the whole set of polarimeter lenses and filters during ten years of the Solar Orbiter mission is of about 2000 Gy. For cerium treated lenses, a dose of 10{sup 6} Gy of gamma radiation from a {sup 60}Co source causes a few percent transmittance loss.
In this paper, we present a systematic approach for the design and optimization of nanoparticle-pigmented solar selective absorbers for operation at 750 °C. Using the scattering and absorption cross-sections calculated by Lorenz-Mie scattering theory as input, we employ a four-flux radiative transfer method to investigate the solar selectivity mechanism and optimize the optical-to-thermal conversion efficiency (η therm ) as a function of the metallic nanoparticle material, the nanoparticle diameter, the volume fraction, and the coating thickness. Among the nanoparticle material candidates in this study, C54-TiSi 2 is the best option with an optimized η therm = 87.0% for a solar concentration ratio of C = 100 and η therm = 94.4% for C = 1000 at 750 °C. NiSi is also a promising candidate comparable to TiSi 2 in thermal efficiency, Experimentally, an un-optimized 200 nm-diameter TiSi 2 nanoparticle-silicone solar selective coating has already achieved η therm = 89.8% for C = 1000 at 750 °C. This performance is consistent with the theoretical model and close to the thermal efficiency of the commercial Pyromark 2500 coatings (90.1%). We also demonstrate that Ni/NiSi core-shell structures embedded in the SiO 1.5 matrix is thermally stable at 750 °C for 1000 h in air. Lastly, these results indicate that silicide cermet coatings are promising to achieve high optical performance and high temperature thermal stability simultaneously.
The rotation of solar magnetic fields for the current solar cycle 24 is investigated through a cross-correlation analysis of the Carrington synoptic maps of solar photospheric magnetic fields during Carrington rotation numbers 2076-2146 (2008 October to 2014 January). The sidereal rotation rates of positive and negative magnetic fields at some latitudes are shown, and it can be found that the positive (negative) fields generally rotate faster than the negative (positive) fields in the southern (northern) hemisphere at low latitudes. The mean rotation profiles of total, positive, and negative magnetic fields between ±60° latitudes in the time interval are also obtained. It should be noted that both of the mean rotation profiles of the positive and negative magnetic fields, as well as the mean rotation profile of the total magnetic field, exhibit a quasi-rigid rotation at latitudes above about 55°. The mean rotation rates of the positive (negative) polarity reach their maximum values at about 9°(6)° latitude in the southern (northern) hemisphere. The mean rotation profile of the total magnetic field displays an obvious north-south asymmetry, where the rotation seems to be more differential in the northern hemisphere. The latitude variation in the rotation rate differences between positive and negative magnetic fields is further studied, and it is found that magnetic fields with the same polarity as the leading sunspots at a given hemisphere rotate faster than those with the opposite polarity, except for the zones around 52° latitude of the southern hemisphere and around 35° latitude of the northern hemisphere. The implication of these results is discussed. It is clear that the obtained results can provide some observational constraints on the theoretical research of the mechanisms of differential rotation and solar cycle.
Planetesimal formation is a common by-product of the star formation process. Taking the dynamical history of the solar system as a guideline-in which the planetesimal belts were heavily depleted due to gravitational perturbation with the giant planets-and assuming similar processes have taken place in other planetary systems, one would expect the interstellar space to be filled with extra-solar planetesimals. However, not a single one of these objects has been detected so far entering the solar system, even though it would clearly be distinguishable from a solar system comet due to its highly hyperbolic orbit. The Large Synoptic Survey Telescope (LSST) will provide wide coverage maps of the sky to a very high sensitivity, ideal to detect moving objects like comets, both active and inactive. In anticipation of these observations, we estimate how many inactive 'interstellar comets' might be detected during the duration of the survey. The calculation takes into account estimates (from observations and models) of the number density of stars, the amount of solids available to form planetesimals, the frequency of planet and planetesimal formation, the efficiency of planetesimal ejection, and the possible size distribution of these small bodies.
Doppler shifts of the Fe I spectral line at 5250 A from the full solar disk obtained over the period 1986 to 2009 are analyzed to determine the circulation velocity of the solar surface along meridional planes. Simultaneous measurements of the Zeeman splitting of this line are used to obtain measurements of the solar magnetic field that are used to select low field points and impose corrections for the magnetically induced Doppler shift. The data utilized is from a new reduction that preserves the full spatial resolution of the original observations so that the circulation flow can be followed to latitudes of 80{sup 0} N/S. The deduced meridional flow is shown to differ from the circulation velocities derived from magnetic pattern movements. A reversed circulation pattern is seen in polar regions for three successive solar minima. A surge in circulation velocity at low latitudes is seen during the rising phases of cycles 22 and 23.
This paper presents a study of a large sample of global disturbances in the solar corona with characteristic propagating fronts as intensity enhancement, similar to the phenomena that have often been referred to as Extreme Ultraviolet Imaging Telescope (EIT) waves or extreme-ultraviolet (EUV) waves. Now EUV images obtained by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory provide a significantly improved view of these large-scale coronal propagating fronts (LCPFs). Between 2010 April and 2013 January, a total of 171 LCPFs have been identified through visual inspection of AIA images in the 193 Å channel. Here we focus on the 138 LCPFs that are seen to propagate across the solar disk, first studying how they are associated with flares, coronal mass ejections (CMEs), and type II radio bursts. We measure the speed of the LCPF in various directions until it is clearly altered by active regions or coronal holes. The highest speed is extracted for each LCPF. It is often considerably higher than EIT waves. We do not find a pattern where faster LCPFs decelerate and slow LCPFs accelerate. Furthermore, the speeds are not strongly correlated with the flare intensity or CME magnitude, nor do they show an association with type II bursts. We do not find a good correlation either between the speeds of LCPFs and CMEs in a subset of 86 LCPFs observed by one or both of the Solar and Terrestrial Relations Observatory spacecraft as limb events.
Recent solar flare observations in the sub-terahertz range have provided evidence of a new spectral component with fluxes increasing for larger frequencies, separated from the well-known microwave emission that maximizes in the gigahertz range. Suggested interpretations explain the terahertz spectral component but do not account for the simultaneous microwave component. We present a mechanism for producing the observed 'double spectra'. Based on coherent enhancement of synchrotron emission at long wavelengths in laboratory accelerators, we consider how similar processes may occur within a solar flare. The instability known as microbunching arises from perturbations that produce electron beam density modulations, giving rise to broadband coherent synchrotron emission at wavelengths comparable to the characteristic size of the microbunch structure. The spectral intensity of this coherent synchrotron radiation (CSR) can far exceed that of the incoherent synchrotron radiation (ISR), which peaks at a higher frequency, thus producing a double-peaked spectrum. Successful CSR simulations are shown to fit actual burst spectral observations, using typical flaring physical parameters and power-law energy distributions for the accelerated electrons. The simulations consider an energy threshold below which microbunching is not possible because of Coulomb repulsion. Only a small fraction of the radiating charges accelerated to energies above the threshold is required to produce the microwave component observed for several events. The ISR/CSR mechanism can occur together with other emission processes producing the microwave component. It may bring an important contribution to microwaves, at least for certain events where physical conditions for the occurrence of the ISR/CSR microbunching mechanism are possible.
The energetic balance of the standard solar model (SSM) results from equilibrium between nuclear energy production, energy transfer, and photospheric emission. In this Letter, we give an order of magnitude of several percent for the loss of energy in kinetic energy, magnetic energy, and X-ray or UV radiation during the entire solar lifetime from the observations of the present Sun. We also estimate the loss of mass from the observations of young solar analogs, which could reach up to 30%. We deduce new models of the present Sun, their associated neutrino fluxes, and internal sound-speed profile. This approach sheds quantitative lights on the disagreement between the sound speed obtained by helioseismology and the sound speed derived from the SSM including the updated photospheric CNO abundances, based on recent observations. We conclude that about 20% of the present discrepancy could come from the incorrect description of the early phases of the Sun, its activity, its initial mass, and mass-loss history. This study has obvious consequences on the solar system formation and the early evolution of the closest planets.
Not provided.
The first step to understand the origin of losses in any photovoltaic solar cell is to determine the fundamental thermodynamic efficiency and voltage limits of such a device. In this contribution, we detail techniques to calculate the voltage limit in the case of cadmium selenium telluride (CdSeTe) solar cells, and how approaches based on bandgap alone—i.e., the Shockley-Queisser approach with step-function absorptance—can overestimate the thermodynamic open-circuit voltage limit Voc,ideal . This is particularly true for arsenic-doped samples, which tend to exhibit below-bandgap absorptance.
Concentrating Solar Power (CSP) generation is an attractive option for low-emission power generation; however, the high costs of thermal storage associated with concentrating solar create a large barrier for their use and adaptation into modern life. Lowering their operation costs, while maintaining high thermal storage and transfer performance is essential. Solid particle-based heat exchange systems can reduce CSP cost but are often less efficient. Efforts to increase their performance have led to use of binary size particle mixes. Presented is an optical-based thermal analysis technique used to measure near-wall thermal conductivity of particle beds essential in determining their heat exchanger efficiency. Modulated Photothermal Radiometry is used to make dynamic temperature measurements, allowing for the extraction of the most relevant thermal properties like thermal conductivity, specific heat, and effusivity. The system uses a modulated laser source causing a damped periodic heat flux, resulting in a frequency and thermal property dependent surface temperature, of which is measured using radiometry. Lock-In techniques are used to extrapolate the amplitude of the signal. Plotting the amplitude against the root angular frequency allows for effusivity measurement by ratio to a known sample. Using specific heat measurements from literature and density measurements, the thermal conductivity of the particle mixes can be calculated. The simplicity of MPTR to probe through the depth of the bed is ideal for use in CSP for dynamic thermal performance monitoring.
Based on the theory of diffusive shock acceleration of charged particles, we have investigated the spectra of protons recorded in the solar cosmic ray event near the Earth’s orbit on November 22, 1977 (ground level enhancement no. 30, GLE30). The proton flux data from the CPME instrument installed on the IMP-8 spacecraft and the worldwide network of neutron monitors have been used to analyze the event. Using GLE30 as an example, we have shown for the first time that solar cosmic rays of relativistic energies can be produced by a shock wave with a relatively low speed of 560 km s{sup –1} in the lower solar corona at a distance up to 1.6R{sub ⊙} (R{sub ⊙} is the solar radius) within 615 s. The calculated proton spectra satisfactorily reproduce the measurements in the Earth’s orbit.
Highly efficient direct current (DC) appliances have the potential to dramatically increase the affordability of off-grid solar power systems used for rural electrification in developing countries by reducing the size of the systems required. For example, the combined power requirement of a highly efficient color TV, four DC light emitting diode (LED) lamps, a mobile phone charger, and a radio is approximately 18 watts and can be supported by a small solar power system (at 27 watts peak, Wp). Price declines and efficiency advances in LED technology are already enabling rapidly increased use of small off-grid lighting systems in Africa and Asia. Similar progress is also possible for larger household-scale solar home systems that power appliances such as lights, TVs, fans, radios, and mobile phones. When super-efficient appliances are used, the total cost of solar home systems and their associated appliances can be reduced by as much as 50%. The results vary according to the appliances used with the system. These findings have critical relevance for efforts to provide modern energy services to the 1.2 billion people worldwide without access to the electrical grid and one billion more with unreliable access. However, policy and market support are needed to realize rapid adoption of super-efficient appliances.
Solar photovoltaic (PV) installations have experienced unprecedented growth in the United States. PV will become not only an energy producer but also a necessary provider of ancillary services at multiple timescales. Conventional methods to simulate power systems operations - such as long-term production simulation (which typically considers schedules from hours to minutes by using an optimization framework) and short-term transient studies (which simulate dynamics from seconds to sub-seconds using state variables and differential equations) - are not sufficient for studying the multiple-timescale variation of solar generation and its impact on system reliability. Long-term system economics and short-term system dynamics are highly coupled, particularly when the penetration level of renewable generation is extremely high, because the uncertainty and variability of solar generation will impact both power system steady-state and dynamic performance. This project helps meet and exceed the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Solar Energy Technologies Office goal of systems integration by directly addressing this stability and reliability challenge for power grid planning and operation. We have developed a temporally comprehensive, closed-loop simulation model, named Multi-timescale Integrated Dynamics and Scheduling (MIDAS), that seamlessly simulates power system operations from economic scheduling (day-ahead to hours) to dynamic response analysis (seconds to sub-seconds). For schedules with very high levels of inverter-based resources (IBRs), up to and including 100%, the stability of grid controls has been evaluated through electromagnetic transient (EMT) simulations and power-hardware-in-the-loop (PHIL) simulations of key transient events at key schedule points. Specifically, MIDAS provides: 1) a closed-loop simulation framework for simulating timescales from economic scheduling to dynamic stability analysis; 2) machine learning-based stability assessment; 3) EMT modeling and analysis for large-scale power systems; 4) MIDAS PHIL test bed. We worked with Hawaii Electric Companies to apply the MIDAS study framework to a Maui grid study. The entire island's transmission system was modeled in detail - from a yearly scheduling model, to a second-level frequency dynamic model, down to a sub-second-scale EMT model to address critical stability issues. The project demonstrated how MIDAS can help system planners and operators assess system reliability and stability while the power grid is marching toward a high-renewable, high-IBR future. In this Maui grid study, we found that 100% instantaneous IBR operation is achievable in EMT simulation and PHIL testing, and grid planners and operators might need new analysis/simulation tools to assess grid reliability and stability in the scheduling stage. MIDAS will bring Maui and other systems closer to 100% clean and stable energy futures. (In this study, we examined transient stability. Other topics necessary for 100% IBR operation, such as protection and resource adequacy, were not examined.)