Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEDIMENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Multistage Triaxial Tests on Laboratory-Formed Methane Hydrate-Bearing Sediments

A sound understanding of the geomechanical behavior of hydrate–bearing sediments (HBSs) is essential not only for assessing reservoir and wellbore stability during methane gas production but also for projecting the impact of global warming on the stability of geological settings that contain hydrates. This study experimentally investigated the geomechanical responses of laboratory–formed methane–HBS to triaxial shearing under drained conditions. The hydrate pore habit formed in the sediments is noncontact–cementing, which is different from contact–cementing or grain–coating hydrate pore habits formed when the excessive gas method is used. The multistage triaxial test method, which shears a single specimen under different confinements, was employed to examine its applicability in measuring geomechanical properties of the HBS. Conventional single–stage triaxial tests were also performed to serve as baselines. The results show that both the strength and stiffness of HBS increase with increased hydrate saturation and confining stress. Shear dilatancy increases with increased hydrate saturation and decreased confining stress. The peak strength and peak/postpeak shear dilation measured using the multistage tests are comparable to those using the single–stage tests. However, the stiffness measured in later stress stages in the multistage tests was enhanced by the stress–strain history of earlier stages. Therefore, the multistage test offers an efficient way of measuring the strength and volumetric response of the HBS with a much smaller number of specimens than the single–stage test. As a result, this benefits the geomechanical characterization of the HBS, as obtaining the pressure cores is extremely costly and preparing lab samples is usually sophisticated and time consuming.

58 GEOSCIENCES↗

Inundation and Sediment Supply Predict Annual but Not Centennial Carbon Accumulation in Tidal Wetlands Across Land‐Use Types

Despite growing interest in the contributions of tidal wetlands to natural climate solutions, data remain scarce on how land use affects their carbon accumulation rates (CAR). Additionally, environmental factors driving the large observed variability in CAR among sites are poorly understood. To address these knowledge gaps, we measured short-term (∼1 year) and long-term (∼100 years) CAR using feldspar marker horizons, 210 Pb profiles, and surface elevation tables from 39 sites in seven estuaries in Oregon and Washington, USA. Sites varied in wetland type (tidal marsh, tidal swamp, nontidal pasture), land-use history (reference, restored, and disturbed), and salinity (fresh to polyhaline). Across both timescales, CAR was lowest in disturbed pastures and highest in restored marshes, reflecting patterns in sediment accretion rates. Short-term CAR exceeded long-term CAR by approximately 50% on average and was only weakly correlated with long-term CAR, with differences among hydrogeomorphic setting. Short-term CAR was well predicted by summer inundation frequency and relative sediment load, together explaining 60% of variance, whereas long-term CAR was poorly predicted by contemporary environmental conditions. These findings highlight the importance of aligning predictor and response timescales when modeling blue carbon dynamics, and reinforce the climate mitigation potential of tidal wetland restoration.

land use and land cover change↗

A PIXE Study of Trace Elements in Sediments of Toledo River, Parana, Brazil

In this work we characterize sediment samples from several points in the River Toledo--PR, using the PIXE (Particle Induced X-Ray Emission) spectroscopy technique, in order to quantify trace elements in these samples aiming to provide information about pollution levels for trace elements. The samples were collected in six points of river, during a period of twelve months (12/2001 to 11/2002). The collected material was air-dried at room temperature and then pressed in pellets. The samples were irradiated under vacuum using a H beam of 2,39 MeV in the LAMFI (Laboratorio de Analises de Materials por Feixe Ionico). Produced x-rays were detected using a Si(Li) detector and a standard electronics. Using the Axil program to analyze PIXE spectra it was possible to identify and quantify some elements present in the samples. A multi-elemental referenced material (Buffalo River sediment--RM 8704) was used to validate the PIXE analysis with thick targets. Twelve months of monitoring of six river points were analyzed and these allowed us to identify 18 elements such as Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Zr e Pb. The following elements were monitored: V, Cr, Mn, Co, Ni, Cu, Zn e Pb.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of the InSTEC's EDXRF assembly for Marine Sediment Pollution Studies

The determination of some heavy elements in marine sediments using the InSTEC's EDXRF assembly was evaluated. The spectrometer's main analytical characteristics were performed using {sup 109}Cd and {sup 238}Pu excitation sources. The system capabilities are tested by the analysis of the Certified Reference Material (CRM) IAEA-356. The results show that the K, Ca, Ti, Mn, Fe, Cu, Zn, Br, Rb, Zr and Pb elemental concentrations can be determined in marine sediments with an excellent accuracy and Co, Ni, Sr and Mo concentrations with an acceptable accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth, sedimentation, heating and charging of dust particles in the polar summer mesosphere

Some peculiarities of the Earth's dusty ionosphere are considered using as an example the polar summer mesosphere. We discuss in detail growth and sedimentation of nanosized dusty/smoke particles in the upper atmosphere; the impact of nano/micro-particles optical properties on their heating and charging; for instance, it has been shown that oppositely charged dust particles may present in the polar summer mesosphere. We present a simple one-dimensional growth-sedimentation model; the model predicts the size and altitude distributions of dust particles in the mesosphere; e.g, the model predicts the bimodal size distribution of the dust particles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Exploration Of Activity Measurements And Equilibrium Checks For Sediment Dating Using Thick-Window Germanium Detectors

Activity measurements on sediment samples for trapped-charge geological dating using gamma-ray spectroscopy are an important verification of the field-site dose rate determination. Furthermore gamma-ray spectroscopy can check if the natural decay series are in secular equilibrium which is a crucial assumption in such dating. Typically the activities of leading members of the Thorium and Uranium decay series are measured, which requires Germanium detectors with thin windows and good energy resolution in order to effectively detect the associated low energy gamma-rays. Such equipment is not always readily available. The potential of conventional Germanium detectors with thick entrance window has been explored towards routine gamma-ray spectroscopy of sediment samples using higher energy gamma-rays. Alternative isotopes, such as Ac-228 and Pb-212 for the Thorium series, and Pa-234m, Ra-226 and Bi-214 for the Uranium series, have been measured in order to determine the mass-specific activity for the respective series and possibly provide a check of secular equilibrium. In addition to measurements of the K-40 activity, with the alternative approach, the activities of both decay series can be accurately determined. The secular equilibrium condition may be tested for the Thorium series. Measurement accuracy for Pa-234m is, however, not sufficient to permit also a reliable check of equilibrium for the Uranium series.

07 ISOTOPE AND RADIATION SOURCES↗

Ecological risk assessment of elemental pollution in sediment from Tunku Abdul Rahman National Park, Sabah

Eleven (11) surface sediment samples were collected from Tunku Abdul Rahman National Park, Sabah. The neutron activation analysis (NAA) and inductively coupled plasma-mass spectrometry (ICP-MS) techniques were applied for the determinations metal contents and their distributions in sediment samples. The results shown that Arsenic (As) concentrations are enriched at all sampling stations except for station TAR 09, with enrichment factor (EF) values ranged from 1.1 to 7.2. The elements such as Cd, Cr, Sb and U showed enrichment at a few stations and other elements (Cr, Cu, Pb, Th, Zn) shown as background levels in all stations. Degrees of contamination in this study were calculated base on concentrations of six elements (As, Cd, Cr, Cu, Pb, and Zn). TAR 11 station can be categorized as very high degree of contamination with degree of contamination value of 43.2. TAR 07 station can be categorized as a considerable degree of contamination (contamination value of 16.9). Six stations (TAR 01, 03, 04, 05, 06, 08, 10) showed moderate degree of contamination, with contamination values ranging from 8.0 to 16.0. TAR 02 and TAR 09 stations showed low degree of contaminations (< 8.0). TAR 11 showed very high ecological risk index (R{sub I}) with RI value is 916. TAR 07 and TAR 10 showed moderate ecological risk index with R{sub I} value 263 and 213, respectively. Other stations showed low ecological risk with RI values ranging from 42.3 to 117 (< 150). Very high ecological risk index could give an adverse effect to the benthic organism. The data obtained from the enrichment factor, degree of contamination and ecological risk index provided vital information, which can be used for future comparison. Information from the present study will be useful to the relevant government agencies and authorities in preparing preventive action to control direct discharge of heavy metals from industries, agro-base activities and domestic waste to the rivers and the sea.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Monte Carlo computer simulation of sedimentation of charged hard spherocylinders

In this article we present a NVT Monte Carlo computer simulation study of sedimentation of an electroneutral mixture of oppositely charged hard spherocylinders (CHSC) with aspect ratio L/σ = 5, where L and σ are the length and diameter of the cylinder and hemispherical caps, respectively, for each particle. This system is an extension of the restricted primitive model for spherical particles, where L/σ = 0, and it is assumed that the ions are immersed in an structureless solvent, i.e., a continuum with dielectric constant D. The system consisted of N = 2000 particles and the Wolf method was implemented to handle the coulombic interactions of the inhomogeneous system. Results are presented for different values of the strength ratio between the gravitational and electrostatic interactions, Γ = (mgσ)/(e{sup 2}/Dσ), where m is the mass per particle, e is the electron's charge and g is the gravitational acceleration value. A semi-infinite simulation cell was used with dimensions L{sub x} ≈ L{sub y} and L{sub z} = 5L{sub x}, where L{sub x}, L{sub y}, and L{sub z} are the box dimensions in Cartesian coordinates, and the gravitational force acts along the z-direction. Sedimentation effects were studied by looking at every layer formed by the CHSC along the gravitational field. By increasing Γ, particles tend to get more packed at each layer and to arrange in local domains with an orientational ordering along two perpendicular axis, a feature not observed in the uncharged system with the same hard-body geometry. This type of arrangement, known as tetratic phase, has been observed in two-dimensional systems of hard-rectangles and rounded hard-squares. In this way, the coupling of gravitational and electric interactions in the CHSC system induces the arrangement of particles in layers, with the formation of quasi-two dimensional tetratic phases near the surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Onsager’s reciprocal relations for electroacoustic and sedimentation: Application to (concentrated) colloidal suspensions

In this article, the relations for electroacoustic phenomena, such as sedimentation potential, sedimentation intensity, colloid vibration potential, colloid vibration intensity/current, or electric sonic amplitude, are given, on the basis of irreversible thermodynamics. This formalism allows in particular to discuss the different expressions for concentrated suspensions found by various authors, which are of great practical interest. It was found that some existing expressions have to be corrected. Relations between the electrophoretic mobilities assessed by the different experiments are derived.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Onsager’s reciprocal relations in electrolyte solutions. I. Sedimentation and electroacoustics

In the framework of irreversible thermodynamics, we show that the sedimentation current in electrolyte solutions is mathematically equivalent to the low frequency limit of the ionic vibration current, appearing in the presence of an acoustic wave. This non-trivial result is obtained thanks to a careful choice of the reference frame used to express the mass fluxes in the context of electroacoustics. Coupled transport phenomena in electrolyte solutions can also be investigated in a mechanical framework, with a set of Newtonian equations for the dynamics of charged solutes. Both in the context of sedimentation and of electroacoustics, we show that the results obtained in the mechanical framework, in the ideal case (i.e., without interactions between ions), do satisfy the Onsager’s reciprocal relations. We also derive the general relation between corrective forces accounting for ionic interactions which must be fulfilled so that the Onsager’s reciprocal relations are verified. Finally, we show that no additional diffusion term needs to be taken into account in the flux of solutes (far from the walls), even if local concentration gradients exist, contrarily to what was done previously in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preliminary study on detection sediment contamination in soil affected by the Indian Ocean giant tsunami 2004 in Aceh, Indonesia using laser-induced breakdown spectroscopy (LIBS)

This work is intended to asses the capability of LIBS for the detection of the tsunami sediment contamination in soil. LIBS apparatus used in this work consist of a laser system and an optical multichannel analyzer (OMA) system. The soil sample was collected from in Banda Aceh City, Aceh, Indonesia, the most affected region by the giant Indian Ocean tsunami 2004. The laser beam was focused onto surface of the soil pellet using a focusing lens to produce luminous plasma. The experiment was conducted under air as surrounding gas at 1 atmosphere. The emission spectral lines from the plasma were detected by the OMA system. It was found that metal including heavy metals can surely be detected, thus implying the potent of LIBS technique as a fast screening tools of tsunami sediment contamination.

54 ENVIRONMENTAL SCIENCES↗

Microbial and viral-like rhodopsins present in coastal marine sediments from four polar and subpolar regions

Rhodopsins are broadly distributed. In this work, we analyzed 23 metagenomes corresponding to marine sediment samples from four regions that share cold climate conditions (Norway; Sweden; Argentina and Antarctica). In order to investigate the genes evolution of viral rhodopsins, an initial set of 6224 bacterial rhodopsin sequences according to COG5524 were retrieved from the 23 metagenomes. After selection by the presence of transmembrane domains and alignment, 123 viral (51) and non-viral (72) sequences (>50 amino acids) were finally included in further analysis. Viral rhodopsin genes were homologs of Phaeocystis globosa virus and Organic lake Phycodnavirus. Non-viral microbial rhodopsin genes were ascribed to Bacteroidetes, Planctomycetes, Firmicutes, Actinobacteria, Cyanobacteria, Proteobacteria, Deinococcus-Thermus and Cryptophyta and Fungi. A rescreening using Blastp, using as queries the viral sequences previously described, retrieved 30 sequences (>100 amino acids). Phylogeographic analysis revealed a geographical clustering of the sequences affiliated to the viral group. This clustering was not observed for the microbial non-viral sequences. The phylogenetic reconstruction allowed us to propose the existence of a putative ancestor of viral rhodopsin genes related to Actinobacteria and Chloroflexi. This is the first report about the existence of a phylogeographic association of the viral rhodopsin sequences from marine sediments.

marine sediment↗

Microbial communities in contaminated sediments, associated with bioremediation of uranium to submicromolar levels

Microbial enumeration, 16S rRNA gene clone libraries, and chemical analysis were used to evaluate the in situ biological reduction and immobilization of uranium(VI) in a long-term experiment (more than 2 years) conducted at a highly uranium-contaminated site (up to 60 mg/liter and 800 mg/kg solids) of the U.S. Department of Energy in Oak Ridge, TN. Bioreduction was achieved by conditioning groundwater above ground and then stimulating growth of denitrifying, Fe(III)-reducing, and sulfate-reducing bacteria in situ through weekly injection of ethanol into the subsurface. After nearly 2 years of intermittent injection of ethanol, aqueous U levels fell below the U.S. Environmental Protection Agency maximum contaminant level for drinking water and groundwater (<30 {micro}g/liter or 0.126 {micro}M). Sediment microbial communities from the treatment zone were compared with those from a control well without biostimulation. Most-probable-number estimations indicated that microorganisms implicated in bioremediation accumulated in the sediments of the treatment zone but were either absent or in very low numbers in an untreated control area. Organisms belonging to genera known to include U(VI) reducers were detected, including Desulfovibrio, Geobacter, Anaeromyxobacter, Desulfosporosinus, and Acidovorax spp. The predominant sulfate-reducing bacterial species were Desulfovibrio spp., while the iron reducers were represented by Ferribacterium spp. and Geothrix spp. Diversity-based clustering revealed differences between treated and untreated zones and also within samples of the treated area. Spatial differences in community structure within the treatment zone were likely related to the hydraulic pathway and to electron donor metabolism during biostimulation.

59 BASIC BIOLOGICAL SCIENCES↗

Distribution of microbial biomass and the potential for anaerobic respiration in Hanford Site 300 Area subsurface sediment

Subsurface sediments were recovered from a 52 m deep borehole cored in the 300 Area of the Hanford Site in southeastern Washington State to assess the potential for biogeochemical transformation of radionuclide contaminants. Microbial analyses were made on 17 sediment samples traversing multiple geological units: the oxic coarse-grained Hanford formation (9-17.4 m), the oxic fine-grained upper Ringold Formation (17.7-18.1 m), and the reduced Ringold Formation (18.3-52m). Microbial biomass (measured as phospholipid) ranged from 7-974 pmols per g in discrete samples, with the highest numbers found in the Hanford formation. On average, strata below 17.4 m had 13-fold less biomass than those from shallower strata. The nosZ gene encoding nitrous oxide reductase had an abundance of 5-17% relative to total 16S rRNA genes below 18.3 m and <5% above 18.1 m. Most nosZ sequences were affiliated with Ochrobactrum anthropi (97% sequence similarity) or had a nearest neighbor of Achromobacter xylosoxidans (90% similarity). Passive multilevel sampling of groundwater geochemistry demonstrated a redox gradient in the 1.5 m region between the Hanford-Ringold formation contact and the Ringold oxic-anoxic interface. Within this zone, copies of the dsrA gene and Geobacteraceae had the highest relative abundance. The majority of dsrA genes detected near the interface were related to Desulfotomaculum sp.. These analyses indicate that the region just below the contact between the Hanford and Ringold formations is a zone of active biogeochemical redox cycling.

09 BIOMASS FUELS↗

The importance of radiocarbon dates and tephra for developing chronologies of Holocene environmental changes from lake sediments, North Far East

One problem with developing continuous chronologies of paleoenvironmental change in northern areas of the Far East using 14C is the low organic content in lake sediments. However, Holocene age-models can be supplemented by widespread tephra deposits reported in the Magadan region. The best documented of these tephras has been correlated to the KO tephra from southern Kamchatka dated to 7600 BP. Though a key chronostratigraphic marker, no detailed compendium of the distribution of this tephra and its associated 14C dates has been available from sites in the northern Far East. We provide such a summary. Known locally as the Elikchan tephra, lake cores indicate an ash fall that extended ~1800 km north of the Kamchatkan caldera with a ~500 km wide trajectory in the Magadan region. Other Holocene tephras preserved in lake sediments have poorer age control and possibly date to ~2500 BP, ~2700 BP and ~6000 BP. These ashes seem to be restricted to coastal or near-coastal sites. Finally, a single record of a ~25,000 BP tephra has also been documented ~100 km to the northeast of Magadan.

54 ENVIRONMENTAL SCIENCES↗

Models, data, and scripts associated with “Prediction of Distributed River Sediment Respiration Rates using Community-Generated Data and Machine Learning”

This data package is associated with the publication “Prediction of Distributed River Sediment Respiration Rates using Community-Generated Data and Machine Learning’’ submitted to the Journal of Geophysical Research: Machine Learning and Computation (Scheibe et al. 2024). River sediment respiration observations are expensive and labor intensive to obtain and there is no physical model for predicting this quantity. The Worldwide Hydrobiogeochemisty Observation Network for Dynamic River Systems (WHONDRS) observational data set (Goldman et al.; 2020) is used to train machine learning (ML) models to predict respiration rates at unsampled sites. This repository archives training data, ML models, predictions, and model evaluation results for the purposes of reproducibility of the results in the associated manuscript and community reuse of the ML models trained in this project. One of the key challenges in this work was to find an optimum configuration for machine learning models to work with this feature-rich (i.e. 100+ possible input variables) data set. Here, we used a two-tiered approach to managing the analysis of this complex data set: 1) a stacked ensemble of ML models that can automatically optimize hyperparameters to accelerate the process of model selection and tuning and 2) feature permutation importance to iteratively select the most important features (i.e. inputs) to the ML models. The major elements of this ML workflow are modular, portable, open, and cloud-based, thus making this implementation a potential template for other applications. This data package is associated with the GitHub repository found at Please see the file level metadata (flmd; “sl-archive-whondrs_flmd.csv”) for a list of all files contained in this data package and descriptions for each. Please see the data dictionary (dd; “sl-archive-whondrs_dd.csv”) for a list of all column headers contained within comma separated value (csv) files in this data package and descriptions for each. The GitHub repository is organized into five top-level directories: (1) “input_data” holds the training data for the ML models; (2) “ml_models” holds machine learning models trained on the data in “input_data”; (3) “scripts” contains data preprocessing and postprocessing scripts and intermediate results specific to this data set that bookend the ML workflow; (4) “examples” contains the visualization of the results in this repository including plotting scripts for the manuscript (e.g., model evaluation, FPI results) and scripts for running predictions with the ML models (i.e., reusing the trained ML models); (5) “output_data” holds the overall results of the ML model on that branch. Each trained ML model resides on its own branch in the repository; this means that inputs and outputs can be different branch-to-branch. Furthermore, depending on the number of features used to train the ML models, the preprocessing and postprocessing scripts, and their intermediate results, can also be different branch-to-branch. The “main-*” branches are meant to be starting points (i.e. trunks) for each model branch (i.e. sprouts). Please see the Branch Navigation section in the top-level README.md in the GitHub repository for more details. There is also one hidden directory “.github/workflows”. This hidden directory contains information for how to run the ML workflow as an end-to-end automated GitHub Action but it is not needed for reusing the ML models archived here. Please the top-level README.md in the GitHub repository for more details on the automation.

13C↗

Estimating Effective Hydraulic Parameters of Unsaturated Layered Sediments Using a Cantor Set Composite Medium Model

Estimating effective hydraulic parameters of variably-saturated layered sediments has been extensively studied using deterministic, stochastic or combined approaches and experiments. However, heterogeneity and scale dependence remain as major obstacles for the prediction of water flow and contaminant transport at DOE sites. A physically-based fractal model is introduced in this work to characterize the heterogeneity of layered sediments at different scales and to estimate effective hydraulic parameters with a composite medium approximation approach. Fractal parameters for the Hanford formation are estimated by spectral analysis of a set of gamma ray log data. Numerical simulation results show that the Cantor set composite medium model may work well at small length scale, low gradients or dry conditions. Under unfavorable conditions, the influence of gradient, or pressure or hydraulic conductivity variance on the effective hydraulic conductivity may not be ignored.

58 GEOSCIENCES↗