Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RF SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Design of a versatile multiaperture negative ion source

Negative ion sources are a key component of the neutral beam injector to be installed in the International Thermonuclear Experimental Reactor. At present research and development activities address several important issues related to beam extraction, optics, and optimization. Together with the design of real size devices and the accumulation of atomic cross section databases, a relatively small negative ion source [130 mA of H{sup -} at 60 kV, named Negative Ion Optimization phase 1 (NIO1)] is under construction at Consorzio RFX to contribute to benchmark numerical simulation tools and to test components, such as emittance scanners, beam dumps, and cesium ovens. NIO1 design, magnet configuration, and rf coupling simulations are described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-intensity ion sources for accelerators with emphasis on H{sup -} beam formation and transport (invited)

This paper lays out the fundamental working principles of a variety of high-current ion sources for accelerators in a tutorial manner, and gives examples of specific source types such as dc discharge-driven and rf-driven multicusp sources, Penning-type, and electron cyclotron resonance-based sources while discussing those principles, pointing out general performance limits as well as the performance parameters of specific sources. Laser-based, two-chamber, and surface-ionization sources are briefly mentioned. Main aspects of this review are particle feed, ionization mechanism, beam formation, and beam transport. Issues seen with beam formation and low-energy transport of negative hydrogen-ion beams are treated in detail.

43 PARTICLE ACCELERATORS↗

Induction heating pure vapor source of high temperature melting point materials on electron cyclotron resonance ion source

Multicharged ions that are needed are produced from solid pure material with high melting point in an electron cyclotron resonance ion source. We develop an evaporator by using induction heating (IH) with multilayer induction coil, which is made from bare molybdenum or tungsten wire without water cooling and surrounding the pure vaporized material. We optimize the shapes of induction coil and vaporized materials and operation of rf power supply. We conduct experiment to investigate the reproducibility and stability in the operation and heating efficiency. IH evaporator produces pure material vapor because materials directly heated by eddy currents have no contact with insulated materials, which are usually impurity gas sources. The power and the frequency of the induction currents range from 100 to 900 W and from 48 to 23 kHz, respectively. The working pressure is about 10{sup -4}-10{sup -3} Pa. We measure the temperature of the vaporized materials with different shapes, and compare them with the result of modeling. We estimate the efficiency of the IH vapor source. We are aiming at the evaporator's higher melting point material than that of iron.

36 MATERIALS SCIENCE↗

First operation of the charge-breeder electron-cyclotron-resonance ion source at the Texas A and M Cyclotron Institute

The 14.5 GHz electron-cyclotron-resonance ion source (ECRIS) designed and fabricated specifically for charge breeding has been installed at the Texas A and M University Cyclotron Institute for use in the institute's ongoing radioactive-ion-beam upgrade. The initial testing of the source has just begun with magnetic analysis of the ECRIS beam. The source has only been conditioning for a brief time at low microwave power, and it is continuing to improve. After the source has been conditioned and characterized, charge-breeding trials with stable beams from a singly ionizing source will begin.

43 PARTICLE ACCELERATORS↗

Analytic Models of Near-Field RF Sheaths

An analytic model is derived for electromagnetic rf wave propagation in a plasma-filled waveguide with rf sheath boundary conditions. The model gives a simplified description of the rf fields and sheath potentials near an ICRF antenna under certain conditions. It assumes an equilibrium magnetic field that is slightly tilted from the normal to the current straps. The rf fields and sheath voltage are calculated in the low-density limit and for the general plasma dielectric using an ordering. The model shows that the launched fast wave couples to a slow wave to satisfy the sheath BC, and the sheath capacitance modifies the relative voltage drops across the plasma and the sheaths. The phasing dependence of the sheath voltage is shown, and a condition is given for validity of the vacuum-field sheath model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Slow Wave Propagation and Sheath Interaction for ICRF Waves in the Tokamak SOL

In previous work we studied the propagation of slow-wave resonance cones launched parasitically by a fast-wave antenna into a tenuous magnetized plasma. Here we extend the previous calculation to ''dense'' scrape-off-layer (SOL) plasmas where the usual slow wave is evanescent. Using the sheath boundary condition, it is shown that for sufficiently close limiters, the slow wave couples to a sheath plasma wave and is no longer evanescent, but radially propagating. A self-consistent calculation of the rf-sheath width yields the resulting sheath voltage in terms of the amplitude of the launched SW, plasma parameters and connection length.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ICRF Wall Conditioning: Present Status and Developments for Future Superconducting Fusion Machines

ITER and future superconducting fusion machines need efficient wall conditioning techniques for routine operation in between shots in the presence of permanent high magnetic field for wall cleaning, surface isotope exchange and to control the in-vessel long term tritium retention. Ion Cyclotron Wall Conditioning (ICWC) based on the ICRF discharge is fully compatible and needs the presence of the magnetic field. The present paper focuses on the principal aspects of the ICWC discharge performance in large-size fusion machines: (i) neutral gas RF breakdown with conventional ICRF heating antennas, (ii) antenna coupling with low density ({approx}10{sup 17} m{sup -3}) RF plasmas and (iii) ICWC scenarios with improved RF plasma homogeneity in the radial and poloidal directions. All these factors were identified as crucial to achieve an enhanced conditioning effect (e.g. removal rates of selected 'marker' masses). All the observed effects are analyzed in terms of RF plasma wave excitation/absorption and compared with the predictions from 1-D RF full wave and 0-D RF plasma codes. Numerical modeling and empirical extrapolation from the existing machines give good evidence for the feasibility of using ICWC in ITER with the main ICRF antenna.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Review of ICR Heating on the Spherical Tokamak Globus-M

The results of experiments on the RF heating of hydrogen-deuterium plasma at ion cyclotron frequencies in the Globus-M spherical tokamak are presented. RF power up to 200 kW at frequencies about 7.5-9 MHz fed via a single-loop antenna led to an increase in the ion temperature from 180 eV up to 400 eV in the best case. High heating efficiency is maintained at high H-concentration (up to 70%). Characteristic times of the ion temperature buildup and decay corresponded to the ion energy confinement time. If the second hydrogen harmonic is arranged in front of antenna, on-axis ion heating becomes worse. It is shown, that in Globus conditions graphite shielding of an inner surface of a vacuum chamber decreases heating due to surface absorption of RF power. Simulation of processes of RF power absorption is performed also. For modeling 1-D wave code was used including all possible mechanisms of RF power absorption.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Validation of an ICRF ITER-Like Antenna on Tore Supra

A prototype of an ICRF antenna based on the load-resilient electrical layout foreseen for ITER has been built at CEA-Cadarache. It consists of a two resonant double loop (RDL) based on the conjugate-T concept proposed for the ITER ICRF array arranged toroidally in a close package. The antenna conditioning and commissioning have been successfully performed to validate the load resilience and the heating capability at the end of 2007. On Tore Supra despite unexciting ELMs, the load resilience studies have been conducted in L-mode by mean of slow variations of the plasma position and fast transient variations with both pellet injection and Supersonic Molecular Beam Injection (SMBI). The capability to maintain the RF power on the ITER-like antenna has been done successfully contrary to the classical ICRF antenna during the SMBI shots, in which the corresponding transient coupling resistance increased by a factor 3-4. In term of coupled power, a maximum power density of 6.6 MW/m2 is reached.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Eigenmode analysis of the ITER ICRF antenna plug and electrical solution to the grounding of the antenna

The excitation of resonant modes in the gap between the ITER ICRH antenna plug and the vessel can considerably increase the level of RF currents and voltages on the ITER plug and disturb the radiation characteristic of the array. We report on a study of these modes and a solution to avoid them in the ITER ion cyclotron range of frequencies. From a transmission line approach we show that resonances can be avoided if the distance between the mouth of the line and an added short-circuit is sufficiently small. We therefore propose to position short-circuits at about lm from the antenna mouth, constituted by rows of closely spaced contacts all around the plug. These conclusions are further validated with Microwave Studio simulations. A simplified model of the ITER ICRF array is used for comparing various grounding solutions and it is proved that the solution already inferred from transmission line approximation suppresses the resonances from the frequency domain relevant for ICRH in ITER. The MWS calculations predict that the proposed solution also avoids large RF currents in the blanket modules and in their connectors. Their amplitude barely exceeds 5% of the strap RF currents. This solution avoids perturbation of the antenna array impedance matrix by the coaxial gap.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Full-Wave Studies of Lower Hybrid Wave Propagation in Tokamaks

A full-wave electromagnetic field solver valid the lower hybrid range of frequencies (LHRF) has been developed that utilizes a semi-spectral representation for the RF electric field. Spurious numerical behavior of the field solver that was found to be related to the inclusion of finite electron Larmor radius terms in the wave equation is discussed. The removal of these terms is shown to eliminate all spurious mode generation, leading to well-behaved electric field solutions for parameters typical of LH current drive experiments in present day sized tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

2D Investigation of LH Coupling and Thermal Loads in Presence of the ITER-Like ICRH Antenna in Tore Supra

Radial poloidal scrape-off layer (SOL) density modifications are known to take place around powered ICRH antennas. Such inhomogeneities alter the Lower Hybrid (LH) wave coupling the associated thermal loads. LH power limitations could therefore possibly be expected in ITER if the LHICRH antennas are to be magnetically connected. The LH behaviour has been investigated in separate experiments Tore Supra in order to compare the influence of the ITER-like antenna prototype with a the standard ICRH antenna. In both experiments density depletion LH coupling degradation was found in the region below the ICRH antenna corner. Above the ICRH antenna corner the IR measurements indicated in both cases a density increase. These experiments confirm that the SOL density modifications around ICRH antennas in spite of different electrical designs are always linked to the antenna corners where SOL biasing by RF sheaths is the strongest.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Proposal on LHCD Experiments in Spherical Tokamaks

A new approach for LHCD problem in spherical tokamaks (ST) is investigated, when the LH waves are slowed down in poloidal rather than toroidal direction by a grill antenna oriented vertically. Characteristics of wave propagation are found by ray tracing technique modernized for the case of strongly inhomogeneous plasma in ST. RF field distribution in ST plasma was simulated by 2D full-wave code. The grill operation is analyzed in these conditions using 3D antenna code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Passive Active Multi-Junction 3, 7 GHZ launcher for Tore-Supra Long Pulse Experiments. Manufacturing Process and Tests

The design and the fabrication of a new Lower Hybrid (LH) actively cooled antenna based on the passive active concept is a part of the CIMES project (Components for the Injection of Mater and Energy in Steady-state). The major objectives of Tore-Supra program is to achieve 1000 s pulses with this LH launcher, by coupling routinely >3 MW of LH wave at 3.7 GHz to the plasma with a parallel index n{sub ||} = 1.7 {sup {+-}}{sup 0.2}. The launcher is on its way to achieve its validation tests--low power Radio Frequency (RF) measurements, vacuum and hydraulic leak tests--and will be installed and commissioned on plasma during the fall of 2009.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-inductive Start-up and Formation of Spherical Torus by Using Electron Cyclotron Range of Frequency on LATE

Non-inductive start-up and formation of spherical torus by using electron cyclotron range of frequency have been studied in the LATE device with microwaves at 2.45 GHz and 5 GHz. A plasma current is initiated and ramped up to I{sub p}{approx_equal}8.1 kA with a 2.45 GHz microwave power of 35 kW, and I{sub p}{approx_equal}20 kA with a 5 GHz power of 190 kW, resulting in the formation of a spherical torus.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison of ICRF-Induced Ion Diffusion Coefficients Calculated with the DC and AORSA Codes

The DC (Diffusion Coefficient) code obtains RF diffusion coefficients by direct numerical integration of the Lorentz force equation for ion motion in the combined equilibrium fields and the RF full wave EM fields from the AORSA full-wave code. Suitable averaging over initial gyro- and toroidal-angle of coordinate 'kicks' after a bounce-period, gives noise-free bounce-averaged diffusion coefficients. For direct comparison with zero-banana-width coefficients from AORSA, perpendicular-drift terms in the Lorentz equation are subtracted off the integration. The DC code has been coupled to the CQL3D Fokker-Planck code. For a C-Mod minority ion ICRF heating test case, the total power absorption using the diffusion coefficients agree well, and the profiles are similarly close. This supports the DC calculation and the Kennel-Engelmann-based, no-correlations, coefficient calculation in AORSA. However, resonance correlations cause large differences in the pitch angle variations of the diffusion coefficients, and in the resulting evolution of the ion distribution functions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Adaptive {delta}f Monte Carlo Method for Simulation of RF-heating and Transport in Fusion Plasmas

Essential for modeling heating and transport of fusion plasma is determining the distribution function of the plasma species. Characteristic for RF-heating is creation of particle distributions with a high energy tail. In the high energy region the deviation from a Maxwellian distribution is large while in the low energy region the distribution is close to a Maxwellian due to the velocity dependency of the collision frequency. Because of geometry and orbit topology Monte Carlo methods are frequently used. To avoid simulating the thermal part, {delta}f methods are beneficial. Here we present a new {delta}f Monte Carlo method with an adaptive scheme for reducing the total variance and sources, suitable for calculating the distribution function for RF-heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of RF-fields in a fusion device

In this paper the problem of scattering off a fusion plasma is approached from the point of view of integral equations. Using the volume equivalence principle an integral equation is derived which describes the electromagnetic fields in a plasma. The equation is discretized with MoM using conforming basis functions. This reduces the problem to solving a dense matrix equation. This can be done iteratively. Each iteration can be sped up using FFTs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗