Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

REDISTRIBUTION OF ALKALINE ELEMENTS IN ASSOCIATION WITH AQUEOUS ACTIVITY IN THE EARLY SOLAR SYSTEM

It is known that the Sayama meteorite (CM2) shows an extensive signature for aqueous alteration on the meteorite parent body, and that most of the primary minerals in the chondrules are replaced with phyllosilicates as the result of the aqueous alteration. In this paper, it is confirmed from the observation of two-dimensional Raman spectra that a part of olivine in a chondrule collected from the Sayama chondrite is serperntinized. Ion microprobe analysis of the chondrule showed that alkaline elements such as Rb and Cs are heterogeneously redistributed in the chondrule. The result of higher Rb and Cs contents in serpentinized phases in the chondrule rather than in other parts suggested the selective adsorption of alkaline elements into the serpentine in association with early aqueous activity on the meteorite parent body. Furthermore Ba isotopic analysis provided variations of {sup 135}Ba/{sup 138}Ba and {sup 137}Ba/{sup 138}Ba in the chondrule. This result was consistent with our previous isotopic data suggesting isotopic evidence for the existence of the presently extinct nuclide {sup 135}Cs in the Sayama meteorite, but the abundance of {sup 135}Cs in the solar system remains unclear because of large analytical uncertainties.

79 ASTRONOMY AND ASTROPHYSICS↗

Growth and characterization studies on L-threoninium p-toluenesulfonate monohydrate crystal

L-threoninium p-toluenesulfonate monohydrate (LTPTM) (IUPAC name: 1-carboxy-2-hydroxypropan-1-aminium 4-methylbenzenesulfonate monohydrate), a new organic nonlinear optical (NLO) crystal, is grown by solution growth method at room temperature. It crystallizes in monoclinic crystal system with noncentrosymmetric space group P2{sub 1}. Presence of NH{sub 3}{sup +} and SO{sub 3}{sup −} vibrations in IR and Raman spectra confirms the formation of LTPTM molecule. The {sup 1}H and {sup 13}C nuclear magnetic resonance (NMR) spectra establish the molecular structure. In the {sup 1}H–NMR spectrum of LTPTM, the chemical shift corresponding to H-SO{sub 3} (6.57 ppm) of p-toluenesulfonic acid monohydrate is absent. This is due to the fact that the hydrogen in H–SO{sub 3} is released and combines with the amine group of L-threonine. This ensures the formation of LTPTM molecule. The O5-H5A…O3 intermolecular interaction is also established by the observed upfield shift of COOH group in LTPTM molecule. The crystal is thermally stable up to 73 °C. LTPTM is transparent from 235 to 1100 nm. The second harmonic generation (SHG) conversion efficiency of LTPTM is 0.77 times that of KDP. Third order nonlinear optical susceptibility (χ{sup (3)}) of the title crystal is 1.3035 × 10{sup −7} esu which is higher than some reported NLO crystals.

36 MATERIALS SCIENCE↗

Alternating current conduction mechanisms of RbMgPO4 compound

Highlights: • Two displacive reversible phase transitions located at T{sub 1} = 442/432 K and T{sub 2} = 460/445 K (heating/cooling). • The temperature dependence of conductivity was described in terms of Arrhenius relation. • The ac conductivity of this compound is proportional to ω{sup s} where the s values are between 0 and 2. • The (CBH) model was found to be the appropriate transport mechanism in RbMgPO{sub 4} compound. - Abstract: Rubidium magnesium monophosphate (RbMgPO{sub 4}) compound was prepared from highly pure constituents by solid state reaction. It was characterized by X-ray powder diffraction, IR, Raman, differential scanning calorimetry (DSC) and impedance spectroscopy. The infrared and Raman spectra were interpreted on the basis of PO{sub 4}{sup 3−} vibrations. DSC revealed two displacive and reversible phase transitions at T{sub 1} = 442/432 K and T{sub 2} = 460/445 K (heating/cooling). The electrical conductivity was measured in the frequency and temperature range 200 Hz-5 MHz and 423 K–523 K, respectively. The obtained results were analysed by fitting the experimental data to an equivalent circuit model. The temperature dependence of alternating and direct current conductivities (σ{sub ac}, σ{sub dc}) confirms the observed transitions in the calorimetric study; they were described in terms of Arrhenius relation. The activation energy’s values were determined in each phase. The AC conductivity behavior is ensured by a single process defined as a hopping transport mechanism. The conductivity frequency dependence was interpreted using the correlated barrier-hopping model (CBH) in all phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thickness-Dependent Thermal Oxidation of Ni into NiO Thin Films

We report thickness-dependent thermal oxidation in Ni (t = 10–300 nm) thin films exposed to air annealing and the resulting vibrational, magnetic and electrical properties of Ni films deposited directly on thermally oxidized Si substrate using magnetron sputtering technique at ambient temperature. As-deposited Ni films exhibit face-centred cubic structure with fine crystals and large lattice constant (a{sub Ni}) at lower t (< 50 nm). With increasing t, a{sub Ni} decreases and approaches to bulk value. With increasing T{sub A}, a{sub Ni} not only decreases to bulk Ni due to improved crystallization but also reduces below bulk Ni for t > 50 due to formation of NiO. The relative fraction of Ni and NiO in annealed films up to 400 {sup ∘}C strongly depends on t. Annealing Ni films at 500 {sup ∘}C results into complete oxidation of Ni into granular-type NiO. X-ray reflectivity studies reveal that oxidation process occurs from surface of the films converting Ni into NiO possibly through layer by layer process, which is subtle to t. Raman spectra show that intensity ratio between one-phonon longitudinal optical (LO) and two-phonon LO bands decreases and intensity of two-magnon band increases with increasing t for films annealed at particular T{sub A}. This confirms the growth of NiO not only with increasing T{sub A}, but also with t. As-deposited films exhibit ferromagnetism at room temperature. The presence of Ni and NiO in annealed films implies coexistence of ferromagnetic and antiferromagnetic interactions, leading to tunable exchange bias (H{sub E}), whose magnitude strongly depends on the ratio between Ni and NiO. Electrical resistance (R) of the as-deposited Ni films decreases with increasing t and follows the Namba’s model. Upon annealing, R increases largely due to oxidation of Ni. The observed results are explained on the basis of thickness dependent thermal oxidation process with increasing T{sub A}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Magnetic Properties of Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} Ferrite Nanoparticles

In this work, solid solutions of Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (where x = 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0) ferrite nanoparticles were synthesized using the novel combustion method. A powder X-ray diffraction study confirms the formation of spinel-structured Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4}. Unusual increases in the lattice constant were observed from 8.358 to 8.435 Å for Zn substitution. Raman spectra show the change in local environment of tetrahedral and octahedral symmetry. Field emission scanning electron microscopy images show that the prepared samples are nanosized and there is not much difference observed in surface morphology. A magnetic study reveals that the prepared samples exhibit superparamagnetic properties with negligible coercivity and the saturation magnetizations initially increase from 31.12 emu g{sup −1} (x = 0) to 35.48 emu g{sup −1} (x = 0.2) and then decrease for further Zn substitution at 300 K. The zero-field-cooled and field-cooled magnetization studies confirm the superparamagnetic nature of prepared samples, and the observed blocking temperature decreases from 146.05 to 32.3 K. At 20 K, the measured hysteresis loop shows the coercivity and it gradually decreases from 810 to 152 Oe. The obtained results suggest that the prepared superparamagnetic Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} ferrite nanoparticles are a promising candidate material for biomedical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid synthesis of Co, Ni co-doped ZnO nanoparticles: Optical and electrochemical properties

We report for the first time a rapid preparation of Zn{sub 1−2x}Co{sub x}Ni{sub x}O nanoparticles via a versatile and environmentally friendly route, microwave-assisted hydrothermal (MAH) method. The Co, Ni co-doped ZnO nanoparticles present an effect on photoluminescence and electrochemical properties, exhibiting excellent electrocatalytic performance compared to undoped ZnO sample. Photoluminescence spectroscopy measurements indicated the reduction of the green–orange–red visible emission region after adding Co and Ni ions, revealing the formation of alternative pathways for the generated recombination. The presence of these metallic ions into ZnO creates different defects, contributing to a local structural disorder, as revealed by Raman spectra. Electrochemical experiments revealed that the electrocatalytic oxidation of dopamine on ZnO attached to multi-walled carbon nanotubes improved significantly in the Co, Ni co-doped ZnO samples when compared to pure ZnO. - Graphical abstract: Rapid synthesis of Co, Ni co-doped ZnO nanoparticles: optical and electrochemical properties. Co, Ni co-doped ZnO hexagonal nanoparticles with optical and electrocatalytic properties were successfully prepared for the first time using a microwave hydrothermal method at mild conditions. - Highlights: • Co{sup 2+} and Ni{sup 2+} into ZnO lattice obtained a mild and environmentally friendly process. • The heating method strongly influences in the growth and shape of the particles. • Short-range defects generated by the ions insertion affects the photoluminescence. • Doped ZnO nanoparticles improve the electrocatalytic properties of pure oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural evolution, sintering behavior and microwave dielectric properties of (1−x)Li{sub 2}TiO{sub 3} + xLiF ceramics

Graphical abstract: - Highlights: • Structure, sinterability and dielectric properties of LiF-doped Li{sub 2}TiO{sub 3} were studied. • Li{sub 2}TiO{sub 3} can be densitied (TD 98%) at lower sintering temperature by LiF additions. • Excellent microwave dielectric properties could be obtained. - Abstract: Structural evolution, sintering behavior, and microwave dielectric properties of (1−x)Li{sub 2}TiO{sub 3} + xLiF (0.05 ≤ x ≤ 0.70) ceramics have been studied by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Raman spectra, thermal dilatometry and microwave resonant measurement at the frequency of about 7–11 GHz. The results show that Li{sub 2}TiO{sub 3} can form limited solid solution with LiF (x ≤ 0.4) and LiF second phase appeared when x{sup 3}0.5. The structure of the solid solution transformed from ordered monoclinic phase (β-Li{sub 2}TiO{sub 3} (ss)) to disordered cubic rock salt (α-Li{sub 2}TiO{sub 3} (ss)) when x{sup 3}0.15. The presence of short range ordering was confirmed for the cubic phase. The sinterability was considerably improved by doping with LiF. Densified ceramics with about 95–98% theoretical density could be obtained for the doped compositions after sintering at 900–1150 °C/2 h. An optimized microwave dielectric properties with ε{sub r} of ∼23.6, Q × f of ∼108,000 GHz and τ{sub f} of ∼4.2 ppm/°C could be obtained for the x = 0.1 composition after sintering at 1100 °C/2 h.

36 MATERIALS SCIENCE↗

Correlation between structure and electrical transport in ion-irradiated graphene grown on Cu foils

Graphene grown by chemical vapor deposition and supported on SiO{sub 2} and sapphire substrates was studied following the controlled introduction of defects induced by 35 keV carbon ion irradiation. Changes in Raman spectra for fluences ranging from 10{sup 12} to 10{sup 15} cm{sup -2} indicate that the structure of graphene evolves from a highly ordered layer, to a patchwork of disordered domains, to an essentially amorphous film. These structural changes result in a dramatic decrease in the Hall mobility by orders of magnitude while, remarkably, the Hall concentration remains almost unchanged, suggesting that the Fermi level is pinned at a hole concentration near 1x10{sup 13} cm{sup -2}. A model for scattering by resonant scatterers is in good agreement with mobility measurements up to an ion fluence of 1x10{sup 14} cm{sup -2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of preparation methods on dispersion stability and electrochemical performance of graphene sheets

Chemical exfoliation is one of the most important strategies for preparing graphene. The aggregation of graphene sheets severely prevents graphene from exhibiting excellent properties. However, there are no attempts to investigate the effect of preparation methods on the dispersity of graphene sheets. In this study, three chemical exfoliation methods, including Hummers method, modified Hummers method, and improved method, were used to prepare graphene sheets. The influence of preparation methods on the structure, dispersion stability in organic solvents, and electrochemical properties of graphene sheets were investigated. Fourier transform infrared microscopy, Raman spectra, transmission electron microscopy, and UV–vis spectrophotometry were employed to analyze the structure of the as-prepared graphene sheets. The results showed that graphene prepared by improved method exhibits excellent dispersity and stability in organic solvents without any additional stabilizer or modifier, which is attributed to the completely exfoliation and regular structure. Moreover, cyclic voltammetric and electrochemical impedance spectroscopy measurements showed that graphene prepared by improved method exhibits superior electrochemical properties than that prepared by the other two methods. - Graphical abstract: Graphene oxides with different oxidation degree were obtained via three methods, and then graphene with different crystal structures were created by chemical reduction of exfoliated graphene oxides. - Highlights: • Graphene oxides with different oxidation degree were obtained via three oxidation methods. • The influence of oxidation methods on microstructure of graphene was investigated. • The effect of oxidation methods on dispersion stability of graphene was investigated. • The effect of oxidation methods on electrochemical properties of graphene was discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure evolution and properties of graphene nanoplatelets reinforced aluminum matrix composites

Highlights: • Lamellar structure of GNPs fibers and Al matrix was obtained in the rolling direction. • Stacking faults were observed in Al grains due to greatly increased GNPs/Al interfaces. • Strength of Al-0.2 wt% GNPs increased 36.8% with negligible electrical conductivity loss. - Abstract: Aluminum matrix composites reinforced with graphene nanoplatelets (GNPs) were prepared by continuous casting and subsequent rolling. Al-GNPs master alloy, prepared by ball milling and cold pressing, was added into Al melts to fabricate the composites. Microstructure evolution of the composites were observed using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron back scattered diffraction (EBSD). GNPs distributed uniformly in the as-cast specimen and then transformed into fibers in the rolling direction after deformation and finally a lamellar structure formed in the composites. Raman spectra showed that the structural damage of GNPs mainly came from ball milling. The interface between GNPs and Al was well combined in general while a few microcracks were observed, which reduced the ductility of the composites and no adverse aluminum carbide (Al{sub 4}C{sub 3}) was detected at the interface. Stacking faults were observed interior of the aluminum grain, which may due to the existence of plentiful interface introduced by GNPs. Fracture observation revealed that the load transferred from Al matrix to GNPs. The ultimate tensile strength of Al-0.2 wt% GNPs composites was about 36.8% higher than that of pure Al with the same casting and rolling process, which should result from the lamellar structure and load transfer, while the conductivity of the composites decreased slightly, indicating that interface scattering between Al and GNPs is very limited. The investigation results show that Al-GNPs composite is potential for high strength and high conductivity application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Combined effects of Bi deficiency and Mn substitution on the structural transformation and functionality of BiFeO{sub 3} films

Mn-doped BiFeO{sub 3} films with Mn contents of 5 and 10 mol. % were prepared via a chemical route. A carefully controlled amount of Bi deficiency was introduced to further tune the lattice structure and the functionality of multiferroic BiFeO{sub 3}. The crystal structure of Bi{sub 1−δ}Fe{sub 1−x}Mn{sub x}O{sub 3} films was investigated by X-ray diffraction and Raman spectra; a rhombohedral-to-orthorhombic phase transition was revealed. The observed double hysteresis loops and two capacitance maxima from polarization vs electric field and capacitance-voltage measurements indicate an antiferroelectric-like behavior. Additionally, the coexistence of ferroelectric (FE) and antiferroelectric (AFE) phases in Bi{sub 1−δ}Fe{sub 1−x}Mn{sub x}O{sub 3} films was revealed from the domain structures obtained by piezoelectric force microscopy. The effects of Mn substitution in conjunction with Bi deficiency on the FE-AFE phase transition and electrical behavior of BiFeO{sub 3} films are discussed in detail. Meanwhile, magnetic and photoluminescence measurements on the films illustrate that Mn substitution gives rise to the net magnetic moment and the defects induced by both Bi deficiency and Mn substitution influence the electronic structure of BiFeO{sub 3} films. This study thus shows a simple and effective way to control the functionalities of BiFeO{sub 3} films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth, defect structure, and THz application of stoichiometric lithium niobate

Owing to the extraordinary richness of its physical properties, congruent lithium niobate has attracted multidecade-long interest both for fundamental science and applications. The combination of ferro-, pyro-, and piezoelectric properties with large electro-optic, acousto-optic, and photoelastic coefficients as well as the strong photorefractive and photovoltaic effects offers a great potential for applications in modern optics. To provide powerful optical components in high energy laser applications, tailoring of key material parameters, especially stoichiometry, is required. This paper reviews the state of the art of growing large stoichiometric LiNbO{sub 3} (sLN) crystals, in particular, the defect engineering of pure and doped sLN with emphasis on optical damage resistant (ODR) dopants (e.g., Mg, Zn, In, Sc, Hf, Zr, Sn). The discussion is focused on crystals grown by the high temperature top seeded solution growth (HTTSSG) technique using alkali oxide fluxing agents. Based on high-temperature phase equilibria studies of the Li{sub 2}O–Nb{sub 2}O{sub 5}–X{sub 2}O ternary systems (X = Na, K, Rb, Cs), the impact of alkali homologue additives on the stoichiometry of the lithium niobate phase will be analyzed, together with a summary of the ultraviolet, infrared, and far-infrared absorption spectroscopic methods developed to characterize the composition of the crystals. It will be shown that using HTTSSG from K{sub 2}O containing flux, crystals closest to the stoichiometric composition can be grown characterized by a UV-edge position of at about 302 nm and a single narrow hydroxyl band in the IR with a linewidth of less than 3 cm{sup −1} at 300 K. The threshold concentrations for ODR dopants depend on crystal stoichiometry and the valence of the dopants; Raman spectra, hydroxyl vibration spectra, and Z-scan measurements prove to be useful to distinguish crystals below and above the photorefractive threshold. Crystals just above the threshold are preferred for most nonlinear optical applications apart holography and have the additional advantage to minimize the absorption even in the far-infrared (THz) range. The review also provides a discussion on the progress made in the characterization of non-stoichiometry related intrinsic and extrinsic defect structures in doped LN crystals, with emphasis on ODR-ion-doped and/or closely stoichiometric systems, based on both spectroscopic measurements and theoretical modelling, including the results of first principles quantum mechanical calculations on hydroxyl defects. It will also be shown that new perspective applications, e.g., the generation of high energy THz pulses with energies on the tens-of-mJ scale, are feasible with ODR-doped sLN crystals if optimal conditions, including the contact grating technique, are applied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation between surface phonon mode and luminescence in nanocrystalline CdS thin films: An effect of ion beam irradiation

The influence of swift heavy ion irradiation (SHII) on surface phonon mode (SPM) and green emission in nanocrystalline CdS thin films grown by chemical bath deposition is studied. The SHII of nanocrystalline CdS thin films is carried out using 70 MeV Ni ions. The micro Raman analysis shows that asymmetry and broadening in fundamental longitudinal optical (LO) phonon mode increases systematically with increasing ion fluence. To analyze the role of phonon confinement, spatial correlation model (SCM) is fitted to the experimental data. The observed deviation of SCM to the experimental data is further investigated by fitting the micro Raman spectra using two Lorentzian line shapes. It is found that two Lorentzian functions (LFs) provide better fitting than SCM fitting and facilitate to identify the contribution of SPM in the observed distortion of LO mode. The behavior of SPM as a function of ion fluence is studied to correlate the observed asymmetry (Γ{sub a}/Γ{sub b}) and full width at half maximum of LO phonon mode and to understand the SHII induced enhancement of SPM. The ion beam induced interstitial and surface state defects in thin films, as observed by photoluminescence (PL) spectroscopy studies, may be the underlying reason for enhancement in SPM. PL studies also show enhancement in green luminescence with increase in ion fluence. PL analysis reveals that the variation in population density of surface state defects after SHII is similar to that of SPM. The correlation between SPM and luminescence and their dependence on ion irradiation fluence is explained with the help of thermal spike model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman scattering studies of strain effects in (100) and (311)B GaAs{sub 1−x}Bi{sub x} epitaxial layers

We report room-temperature Raman studies of strained (100) and (311)B GaAs{sub 1−x}Bi{sub x} epitaxial layers for x ≤ 0.039. The Raman spectra exhibit a two-mode behavior, as well as disorder-activated GaAs-like phonons. The experimental results show that the GaAs-like LO(Γ) mode experiences a strong composition-dependent redshift as a result of alloying. The peak frequency decreases linearly from the value for pure GaAs (∼293 cm{sup −1}) with the alloyed Bi fraction x and the introduced in-plane lattice strain ε{sub ∥}, by Δω{sub LO}=Δω{sub alloy}−Δω{sub strain}. X-ray diffraction measurements are used to determine x and ε{sub ∥} allowing Δω{sub alloy} to be decoupled and is estimated to be −12(±4) cm{sup −1}/x for (100) GaAs{sub 1−x}Bi{sub x}. Δω{sub LO} is measured to be roughly double for samples grown on (311)B-oriented substrates to that of (100) GaAs. This large difference in redshift is accounted for by examining the Bi induced strain, effects from alloying, and defects formed during high-index (311)B crystal growth.

36 MATERIALS SCIENCE↗

Gas phase synthesis of non-bundled, small diameter single-walled carbon nanotubes with near-armchair chiralities

We present a floating catalyst synthesis route for individual, i.e., non-bundled, small diameter single-walled carbon nanotubes (SWCNTs) with a narrow chiral angle distribution peaking at high chiralities near the armchair species. An ex situ spark discharge generator was used to form iron particles with geometric number mean diameters of 3–4 nm and fed into a laminar flow chemical vapour deposition reactor for the continuous synthesis of long and high-quality SWCNTs from ambient pressure carbon monoxide. The intensity ratio of G/D peaks in Raman spectra up to 48 and mean tube lengths up to 4 μm were observed. The chiral distributions, as directly determined by electron diffraction in the transmission electron microscope, clustered around the (n,m) indices (7,6), (8,6), (8,7), and (9,6), with up to 70% of tubes having chiral angles over 20°. The mean diameter of SWCNTs was reduced from 1.10 to 1.04 nm by decreasing the growth temperature from 880 to 750 °C, which simultaneously increased the fraction of semiconducting tubes from 67% to 80%. Limiting the nanotube gas phase number concentration to ∼10{sup 5 }cm{sup −3} prevented nanotube bundle formation that is due to collisions induced by Brownian diffusion. Up to 80% of 500 as-deposited tubes observed by atomic force and transmission electron microscopy were individual. Transparent conducting films deposited from these SWCNTs exhibited record low sheet resistances of 63 Ω/□ at 90% transparency for 550 nm light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two new zincophosphates, (H{sub 3}NCH{sub 2}CH{sub 2}NH{sub 3}){sub 2}[Zn({mu}-PO{sub 4}){sub 2}] and (NH{sub 4})[(H{sub 3}N)Zn{l_brace}({mu}-PO{sub 4})Zn{r_brace}{sub 3}]: Crystal structures and relationships to similar open framework zinco- and aluminophospates

Two new zincophosphates, bis(ethylenediammonim) catena-bis({mu}-phosphato)zincate, (H{sub 3}NCH{sub 2}CH{sub 2}NH{sub 3}){sub 2}[Zn({mu}-PO{sub 4}){sub 2}] (1), and ammonium ammine-tris({mu}-phosphato)tetrazincate, (NH{sub 4})[(H{sub 3}N)Zn{l_brace}({mu}-PO{sub 4})Zn{r_brace}{sub 3}] (2), were synthesized under hydrothermal conditions and their crystal structures were determined by single-crystal X-ray diffraction analysis. The crystal structure of 1 consists of infinite macroanionic ZnP{sub 2}O{sub 8}{sup 4-} chains, running along the [0 0 1] direction, and diprotonated ethylenediammonium cations, H{sub 2}en{sup 2+}. The crystal structure of 2 is built up from ZnO{sub 4}, Zn(NH{sub 3})O{sub 3} and PO{sub 4} vertex-sharing tetrahedra connected to form an open 3D framework. The ammonium groups, NH{sub 4}{sup +}, are located in the channels formed by 8M-rings extending along [1 0 0]. In order to study vibrational behavior of H{sub 2}en{sup 2+} and NH{sub 4}{sup +} cations, NH{sub 3} molecules in 1 and 2, single-crystal Raman spectra were obtained. Structural, chemical and topological similarities to the other open framework zinco- and aluminophosphates incorporating different guest species are discussed. - Graphical Abstract: Structure of 1 (left): polyhedral (a) and ORTEP-like (b) representation of the ZnP{sub 2}O{sub 8}{sup 4-} chain with two H{sub 2}en{sup 2+} cations. Structure of 2 (right): polyhedral structure of the layers I and II seen along [1 0 0] (c-axis is vertical). Highlights: > Synthesis under hydrothermal conditions and the crystal structures of two new zincophosphates. > Compound 1 is a new inorganic-organic hybrid compound. > Structure of 1 consists of infinite macroanionic ZnP{sub 2}O{sub 8}{sup 4-} chains and H{sub 2}en{sup 2+} (en=ethylenediamine) cations. > Structure of 2 is a novel 3D open framework structure with 8M channels. > Structure of 2 is the first 3D zincophosphate which incorporates both, the coordinated NH{sub 3} molecule and NH{sub 4}{sup +} cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiferroic and magnetoelectric properties of CoFe{sub 2}O{sub 4}/Pb{sub 1−x}Sr{sub x}TiO{sub 3} composite films

To realize multiferroic and magnetoelectric properties, bi-layered nanocomposite films consisting of CoFe{sub 2}O{sub 4} (CFO)/Pb{sub 1−x}Sr{sub x}TiO{sub 3} (PST) phases (x = 0.1, 0.2, and 0.3) have been deposited on Pt/TiO{sub 2}/SiO{sub 2}/Si substrate by using a metallo-organic decomposition process. Both the PST perovskite and the CFO spinel phases are confirmed from X-ray diffraction patterns and Raman spectra of the composite films. The composite films exhibit room temperature multiferroic properties. The values of saturation magnetization (M{sub s}), remanent magnetization (M{sub r}), and coercive field (H{sub c}) of the composite films are in the range of 108–119 kA/m, 42–51 kA/m, and 44.5–64.1 kA/m, respectively. In addition, the saturation polarization (P{sub s}), remanent polarization (P{sub r}), and electrical coercive field (E{sub c}) are observed in the range of 11.3–14.4 μC/cm{sup 2}, 2.9–4.8 μC/cm{sup 2}, and 56–59.5 kV/cm, respectively. The dielectric response in the presence of applied magnetic field, H{sub dc} ∼ 238.6 kA/m shows a high magnetocapacitance value ∼385% at frequency 100 kHz for CFO/PST composite film with x = 0.1. The maximum magnetoelectric voltage co-efficient value, α{sub E} ∼ 380 kV/(m × T) has been achieved in the composite films with x = 0.1. The influence of elastic/and or interfacial strain on multiferroic magnetoelectric properties is evident from the results.

36 MATERIALS SCIENCE↗

Brillouin function characteristics for La-Co substituted barium hexaferrites

La-Co substituted barium hexaferrites with the chemical formula of Ba{sub 1−x}La{sub x}Fe{sub 12−x}Co{sub x}O{sub 19} (x = 0.0, 0.1, 0.3, and 0.5), prepared by a conventional ceramic method, were systematically investigated by Raman spectra, X-ray photoelectron spectroscopy, Rietveld refinement of X-ray diffraction patterns, and vibrating sample magnetometer. The result manifests that all the compounds are crystallized in magnetoplumbite hexagonal structure. Trivalent cobalt ions prevailingly occupy the 2a, 4f{sub 1}, and 12k sites. According to Néel model of collinear-spin ferrimagnetism, the molecular-field coefficients ω{sub bf2}, ω{sub kf1}, ω{sub af1}, ω{sub kf2}, and ω{sub bk} of La-Co substituted barium hexaferrites have been calculated using the nonlinear fitting method, and the magnetic moment of five sublattices (2a, 2b, 4f{sub 1}, 4f{sub 2}, and 12k) versus temperature T has been also investigated. The fitting results are coincided well with the experimental data. Moreover, with the increase of La-Co substitution amount x, the molecular-field coefficients ω{sub bf2} and ω{sub af1} decrease constantly, while the molecular-field coefficients ω{sub kf1}, ω{sub kf2}, and ω{sub bk} show a slight change.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗