Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

In‐situ Analysis of Paste Properties in Resonant Acoustic Mixers for Quality Monitoring

Formulation control is key to achieving consistent target properties of energetic materials, as feedstock variations and slight deviations in the ratios of different ingredients can have major effects on final product properties, particularly in dense pastes with high particle loading >65 vol.%. In large‐scale operations, it is imperative to either correct or remove batches of material that perform outside baseline property specifications as early as possible to avoid unnecessary processing of suboptimal material. Quality monitoring is the practice of measuring material properties during processing using process analytical technologies as opposed to only testing the properties of the final product; it is a key principle in the quality‐by‐design frameworks used for designing formulations and manufacturing processes. Herein, a process analytical technology method for correlating material properties of dense pastes directly after mixing in a Resonant Acoustic Mixer to motor data is developed and used to detect differences in the particle content of dense paste formulations. This method was also capable of detecting variations in powder feedstock properties, such as particle packing efficiency, and is sensitive enough to detect changes of 2 wt.% in the total solids content of the formulation. The techniques presented herein show excellent promise for use as a process analytical technology capable of quantifying formulation effects on material movement modes during resonant acoustic mixing.

Materials science↗

First of Their Kind: Solar Cells with a Dry-Processed Perovskite Absorber Layer via Powder Aerosol Deposition and Hot-Pressing

Preparing halide perovskite films by solvent-free, powder-based processing approaches currently attracts more and more attention. However, working solar cells employing dry, powder-based halide perovskite thin films, have not been demonstrated so far. Herein, perovskite solar cells are presented where the absorber layer is prepared by transferring readily synthesized perovskite powders into a compact thin film using a fully dry-powder-processing concept. Compact thin films are deposited via an optimized powder aerosol deposition (PAD) process. Pressing at 120 °C further improves the morphology and the optoelectronic film properties. Integrating the perovskite films in a solar cell configuration results in fully working devices, with champion power conversion efficiencies of >6%. While the (optoelectronic) properties of the PAD-processed films are found to be comparable with their solution-processed counterparts, investigations of the solar cell stack suggest deterioration of the electron-transport layer properties due to the PAD process, and the presence of hydrates at the perovskite surface to be important factors that contribute to the limited solar cell efficiency. Herein, perspectives to overcome the identified limitations are outlined, emphasizing the high potential and realizability of efficient perovskite solar cells based on dry-powder-processing approaches in the future.

14 SOLAR ENERGY↗

Accessing (Ba 1-x Sr x )Al 2 Si 2 O 8 :Eu Phosphors for Solid State White Lighting via Microwave-assisted Preparation: Tuning Emission Color by Coordination Environment

The preparation of Eu 2+ -substituted barium aluminum silicates is achieved using a rapid microwave-assisted preparation. The phase evolution of two BaAl 2 Si 2 O 8 :Eu 2+ polymorphs, the higher temperature hexagonal phase (hexacelsian), and the lower temperature monoclinic phase (celsian), is explored by varying the ramp time and soak time. This preparation method significantly reduces the reaction time needed to form these phases compared to conventional solid state routes. The luminescent properties of the two phases are identified under UV excitation with the hexagonal phase emitting in the UV region (λ em = 372 nm) and the monoclinic phase emitting in the blue region (λ em = 438 nm). The differences in optical properties of the two polymorphs are correlated to the coordination number and arrangement of the alkali earth site. The optical properties of the monoclinic phase can be further tuned through the substitution of Sr 2+ , forming the solid solution (Ba 1–x Sr x )Al 2 Si 2 O 8 :Eu 2+ . Changes in the crystal structure due to Sr 2+ substitution produce a surprising blue-shift in the emission spectrum, which is explained by a greater dispersion of bond lengths in the (Ba/Sr)–O polyhedra. The entire monoclinic solid solution exhibits excellent quantum yields of nearly 90 %, owing to the structural rigidity provided by the highly connected tetrahedral network.

Brgoch, Jakoah↗

Evaluating Quality of Service Traffic Classes on the Megafly Network

An emerging trend in High Performance Computing (HPC) systems that use hierarchical topologies (such as dragonfly) is that the applications are increasingly exhibiting high run-to-run performance variability. This poses a significant challenge for application developers, job schedulers, and system maintainers. One approach to address the performance variability is to use newly proposed network topologies such as megafly (or dragonfly+) that offer increased path diversity compared to a traditional fully connected dragonfly. Yet another approach is to use quality of service (QoS) traffic classes that ensure bandwidth guarantees. In this work, we select HPC application workloads that have exhibited performance variability on current 2-D dragonfly systems. We evaluate the baseline performance expectations of these workloads on megafly and 1-D dragonfly network models with comparably similar network configurations. Our results show that the megafly network, despite using fewer virtual channels (VCs) for deadlock avoidance than a dragonfly, performs as well as a fully connected 1-D dragonfly network. We then exploit the fact that megafly networks require fewer VCs to incorporate QoS traffic classes. We use bandwidth capping and traffic differentiation techniques to introduce multiple traffic classes in megafly networks. In some cases, our results show that QoS can completely mitigate application performance variability while causing minimal slowdown to the background network traffic.

Mubarak, Misbah↗

Mathematical Foundation for Quantum Computing of Electromagnetic Wave Propagation in Dielectric Media

Can quantum computers effectively simulate the propagation and scattering of electromagnetic waves in a classical plasma? This chapter introduces some of the basic concepts in mathematics and physics essential to answering that question. The numerical simulations of Maxwell equations for wave propagation in dielectrics are constrained by technological limitations of the present-day computers. In contrast, there has been ample fanfare around quantum computers and their potential to far exceed the performance of traditional computers. Whether the enhanced capabilities of a quantum computer can be put to use for simulating topics in classical physics is a source of intrigue and curiosity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improved zircon fission-track annealing model based on reevaluation of annealing data

The thermal recovery (annealing) of mineral structure modified by the passage of fission fragments has long been studied by the etching technique. In minerals like apatite and zircon, the annealing kinetics are fairly well constrained from the hour to the million-year timescale and have been described by empirical and semi-empirical equations. On the other hand, laboratory experiments, in which ion beams interact with minerals and synthetic ceramics, have shown that there is a threshold temperature beyond which thermal recovery impedes ion-induced amorphization. In this work, it is assumed that this behavior can be extended to the annealing of fission tracks in minerals. It is proposed that there is a threshold temperature, T0, beyond which fission tracks are erased within a time t0, which is independent of the current state of lattice deformation. This implies that iso-annealing curves should converge to a fanning point in the Arrhenius pseudo-space (ln t vs. 1/T). Based on the proposed hypothesis, and laboratory and geological data, annealing equations are reevaluated. The geological timescale estimations of a model arising from this study are discussed through the calculation of partial annealing zone and closure temperature, and comparison with geological sample constraints found in literature. It is shown that the predictions given by this model are closer to field data on closure temperature and partial annealing zone than predictions given by previous models.

annealing↗

Integrated modeling for assessing climate change impacts on water resources and hydropower potential in the Himalayas

Regional hydroclimatic variability and change can affect water resources and hydropower generation. It is essential to assess hydropower potential under current and future climatic conditions to inform the design and operation of hydropower infrastructures. Here, we employ an integrated modeling framework to assess the impact of projected hydroclimatic conditions on water resource systems and hydropower generation. The integrated framework samples climate model outputs under different scenarios to force a hydrologic model and produces streamflow projections. The projected streamflows are inputs for the future hydropower potential assessment. We implement the framework in the central Himalayan river basin. Our results demonstrate substantial spatiotemporal variability in different water balance components (precipitation, evapotranspiration, and water yield) under current and future climatic conditions. For the Himalayan Tila river basin, the annual average energy production is expected to increase under future hydroclimatic conditions (up to 39% in Tila-2 hydropower project, suggested by ensemble mean). Furthermore, this increase in energy is driven mainly by the increased streamflow projections, particularly during the dry season and in the late century. Our results highlight the impacts of hydroclimatic variability in hydropower productions and are of practical use to provide decision-relevant information for designing and operating hydropower infrastructures. The integrated modeling framework presented here is region-specific; however, the approach is reproducible, and the overall insights are generalizable across the Himalayan region.

54 ENVIRONMENTAL SCIENCES↗

Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-Based Battery Enclosures for Crashworthiness

Carbon fiber composite can be a potential candidate for replacing metal-based battery enclosures of current electric vehicles (E.V.s) owing to its better strength-to-weight ratio and corrosion resistance. However, the strength of carbon fiber-based structures depends on several parameters that should be carefully chosen. Here, in this work, we implemented high throughput finite element analysis (FEA) based thermoforming simulation to virtually manufacture the battery enclosure using different design and processing parameters. Subsequently, we performed virtual crash simulations to mimic a side pole crash to evaluate the crashworthiness of the battery enclosures. This high throughput crash simulation dataset was utilized to build predictive models to understand the crashworthiness of an unknown set. Our machine learning (ML) models showed excellent performance (R 2 > 0.97) in predicting the crashworthiness metrics, i.e., crush load efficiency, absorbed energy, intrusion, and maximum deceleration during a crash. We believe that this FEA-ML work framework will be helpful in down select process parameters for carbon fiber-based component design and can be transferrable to other manufacturing technologies.

36 MATERIALS SCIENCE↗

Stellarator Research Opportunities: A Report of the National Stellarator Coordinating Committee

This paper is the product of a stellarator community workshop, organized by the National Stellarator Coordinating Committee and referred to as Stellcon, that was held in Cambridge, Massachusetts in February 2016, hosted by MIT. The workshop was widely advertised, and was attended by 40 scientists from 12 different institutions including national labs, universities and private industry, as well as a representative from the Department of Energy. The final section of this document describes areas of community wide consensus that were developed as a result of the discussions held at that workshop. Areas where further study would be helpful to generate a consensus path forward for the US stellarator program are also discussed. The program outlined in this document is directly responsive to many of the strategic priorities of FES as articulated in “Fusion Energy Sciences: A Ten-Year Perspective (2015–2025)” [1]. The natural disruption immunity of the stellarator directly addresses “Elimination of transient events that can be deleterious to toroidal fusion plasma confinement devices” an area of critical importance for the US fusion energy sciences enterprise over the next decade. Another critical area of research “Strengthening our partnerships with international research facilities,” is being significantly advanced on the W7-X stellarator in Germany and serves as a test-bed for development of successful international collaboration on ITER. Finally, this report also outlines how materials science as it relates to plasma and fusion sciences, another critical research area, can be carried out effectively in a stellarator. Additionally, significant advances along two of the Research Directions outlined in the report; “Burning Plasma Science: Foundations—Next-generation research capabilities”, and “Burning Plasma Science: Long pulse—Sustainment of Long-Pulse Plasma Equilibria” are proposed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Review on Magnetocaloric Effect and Materials

A detailed discussion of magnetocaloric properties of distinct materials is a vital aspect in magnetic refrigeration technology. This review paper deals with all kinds of magnetocaloric materials such as ferromagnetic perovskites, glass ceramics, oxide-based composites and spinel ferrites. The comparative study of magnetocaloric properties revealed that manganites have the potential applications in magnetorefrigeration technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A behavioral choice model of the use of car-sharing and ride-sourcing services

There are a number of disruptive mobility services that are increasingly finding their way into the marketplace. Two key examples of such services are car-sharing services and ride-sourcing services. In an effort to better understand the influence of various exogenous socio-economic and demographic variables on the frequency of use of ride-sourcing and car-sharing services, this paper presents a bivariate ordered probit model estimated on a survey data set derived from the 2014-2015 Puget Sound Regional Travel Study. Model estimation results show that users of these services tend to be young, well-educated, higher-income, working individuals residing in higher-density areas. There are significant interaction effects reflecting the influence of children and the built environment on disruptive mobility service usage. The model developed in this paper provides key insights into factors affecting market penetration of these services, and can be integrated in larger travel forecasting model systems to better predict the adoption and use of mobility-on-demand services.

30 DIRECT ENERGY CONVERSION↗

Representing heterogeneity in structural relationships among multiple choice variables using a latent segmentation approach

Travel model systems often adopt a single decision structure that links several activity-travel choices together. The single decision structure is then used to predict activity-travel choices, with those downstream in the decision-making chain influenced by those upstream in the sequence. The adoption of a singular sequential causal structure to depict relationships among activity-travel choices in travel demand model systems ignores the possibility that some choices are made jointly as a bundle as well as the possible presence of structural heterogeneity in the population with respect to decision-making processes. As different segments in the population may adopt and follow different causal decision-making mechanisms when making selected choices jointly, it would be of value to develop simultaneous equations model systems relating multiple endogenous choice variables that are able to identify population subgroups following alternative causal decision structures. Because the segments are not known a priori, they are considered latent and determined endogenously within a joint modeling framework proposed in this paper. The methodology is applied to a national mobility survey data set to identify population segments that follow different causal structures relating residential location choice, vehicle ownership, and car-share and mobility service usage. It is found that the model revealing three distinct latent segments best describes the data, confirming the efficacy of the modeling approach and the existence of structural heterogeneity in decision-making in the population. Future versions of activity-travel model systems should strive to incorporate such structural heterogeneity to better reflect varying decision processes across population subgroups.

30 DIRECT ENERGY CONVERSION↗

Monte Carlo Simulations of 347H Stainless Steel Aging for the Synthetic Generation of Microstructures Under Creep Conditions

Here, a Monte Carlo simulation method capable of replicating the kinetics of M 23 C 6 precipitation in 347H stainless steels was developed for the purpose of producing synthetic microstructures that approximate its microstructural evolution under aging periods of up to 10,000 hours at temperatures between 600 °C and 750 °C. To accomplish this, experimental data from the literature was used to parameterize simulations and replicate the nucleation and growth kinetics of M 23 C 6 particles within 347H and similar austenitic stainless steel alloys. These simulations were found to have considerable fidelity to previous efforts to study the precipitation of M 23 C 6 in other 300 series stainless steel alloys. Synthetic 347H microstructures were then generated that accounted the effects of aging temperature, duration, dislocation density, and the presence of boron within the microstructure. These simulations predict several key trends, those being that (1) the size of M 23 C 6 precipitates decreased with aging temperature and (2) the growth rate of M 23 C 6 particles decreased with aging temperature. Further, while (3) the addition of dislocation density due to creep conditions resulted in increasing intragranular nucleation of M 23 C 6 precipitates with increasing dislocation density and (4) B additions within the microstructure led to modest increases in precipitate size above 700 °C, which indicates that more complex physics are necessary to account for the presence of B.

36 MATERIALS SCIENCE↗

Solidification and Liquation Cracking Behavior of Dual-Phase Steel DP600

In this work, the solidification and liquation cracking behavior of a dual-phase steel DP600 was examined using longitudinal Varestraint testing and hot ductility testing. Varestraint tests showed only limited cracking even at 4 pct augmented strain. Hot ductility tests showed that the nil-strength temperature of the steel was 1459 °C, while the nil-ductility and the ductility-recovery temperatures were 1435 °C and 1420 °C, respectively. The brittleness temperature range was found to be 39 °C, and the DP600 steel was highly resistant to both weld metal solidification cracking and heat-affected zone liquation cracking. The reasons for the high hot cracking resistance of dual-phase steel DP600 are discussed.

36 MATERIALS SCIENCE↗

Tensile Behavior of Electron Beam-Welded and Post-Weld Vacuum-Annealed Nb-10% Hf-1% Ti Refractory Alloy Weldments

Nb-10% Hf-1% Ti refractory alloy is a high performance material extensively used for high temperature applications. Electron beam welding is one of the most widely used techniques to join refractory and reactive alloys. Bigger sizes of nozzles for rocket propulsion applications can be either made through deep drawing and flow turning route or by roll bending and welding route both using sheets/plates as input material for fabrication. The latter is a more economical option for mass production of the hardware using such exotic and expensive alloys. In view of this, both as-welded (AW) coupon and weld plus post-weld vacuum-annealed (AW + VA) coupon have been prepared to study their mechanical behavior. It has been observed that tensile strength and ductility have not been reduced in both these conditions vis-à-vis the base metal, confirming weld efficiency of the alloy to be ~ 100%. Microhardness is found to be 150-160 VHN in the base metal and 200-225 VHN in the weld fusion zone in AW condition, which became uniform (145-155 VHN) throughout the weldment in AW + VA condition. Microstructure of the weldment in AW condition is found to be consisting of grains solidified by epitaxial mode from base metal toward the weld centre. In AW + VA condition, improvement in tensile elongation is observed, which is found to be due to the presence of homogenized grains/more uniform microstructure near the heat-affected zone as compared to the steep gradient in grain size in different zones in the weld in AW condition.

36 MATERIALS SCIENCE↗

Brazing of Martensitic Stainless Steel to Copper Using Electroplated Copper and Silver Coatings

Brazing of 3 mm thick sheets of low-carbon martensitic stainless steel and Cu-Cr-Zr-Ti alloy was attempted using electroplated coatings of Cu and Ag. Ni coating of 5 µm thick was provided on the MSS base metal to enhance the wettability. Brazing experiments were carried out at 985 °C for a holding of 15 min. Detailed microstructural studies, hardness, lap-shear, tensile, and pressure tests were carried out on the brazed joints. The reaction between the Cu and Ag coatings lead to the formation of in situ braze metal. The microstructure of the braze metal was found to consist of Cu-rich primary alpha (α{sub P}) and Ag-rich eutectic mixture (β + α{sub E}). In lap-shear tests, the brazed joints produced with an overlap of 9 and 6 mm were found to fail in copper base metal, while the joints produced with an overlap of 3 mm failed in the braze metal exhibiting a lap-shear strength of 147 MPa. In tensile tests, the butt brazed joints were found to fail in copper base metal as well with an average tensile strength of 213 MPa. The braze metal hardness was found to be higher than the hardness of the copper base metal. In pressure tests, the brazed panels were found to survive a pressure of 750 bar without undergoing any damage. These results show that electroplated coatings of Cu and Ag can be advantageously utilized for brazing of large, complex-shaped parts such as thrust chambers in space industry.

36 MATERIALS SCIENCE↗