Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process Scaling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Characterization of the Temperature Capabilities of Advanced Disk Alloy ME3

The successful development of an advanced powder metallurgy disk alloy, ME3, was initiated in the NASA High Speed Research/Enabling Propulsion Materials (HSR/EPM) Compressor/Turbine Disk program in cooperation with General Electric Engine Company and Pratt & Whitney Aircraft Engines. This alloy was designed using statistical screening and optimization of composition and processing variables to have extended durability at 1200 F in large disks. Disks of this alloy were produced at the conclusion of the program using a realistic scaled-up disk shape and processing to enable demonstration of these properties. The objective of the Ultra-Efficient Engine Technologies disk program was to assess the mechanical properties of these ME3 disks as functions of temperature in order to estimate the maximum temperature capabilities of this advanced alloy. These disks were sectioned, machined into specimens, and extensively tested. Additional sub-scale disks and blanks were processed and selectively tested to explore the effects of several processing variations on mechanical properties. Results indicate the baseline ME3 alloy and process can produce 1300 to 1350 F temperature capabilities, dependent on detailed disk and engine design property requirements.

Gabb, Timothy P.↗
NASA NTRS1979

The development of methods for predicting and measuring distribution patterns of aerial sprays

The capability of conducting scale model experiments which involve the ejection of small particles into the wake of an aircraft close to the ground is developed. A set of relationships used to scale small-sized dispersion studies to full-size results are experimentally verified and, with some qualifications, basic deposition patterns are presented. In the process of validating these scaling laws, the basic experimental techniques used in conducting such studies, both with and without an operational propeller, were developed. The procedures that evolved are outlined. The envelope of test conditions that can be accommodated in the Langley Vortex Research Facility, which were developed theoretically, are verified using a series of vortex trajectory experiments that help to define the limitations due to wall interference effects for models of different sizes.

Ormsbee, A. I.↗
NASA NTRS2021

The Search for Lunar Mantle Rocks Exposed on the Surface of the Moon

The lunar surface is ancient and well-preserved, recording Solar System history and planetary evolution processes. Ancient basin-scale impacts excavated lunar mantle rocks, which are still expected to be present on the surface. Sampling these rocks would provide insight into fundamental planetary processes, including differentiation and magmatic evolution. There is contention among lunar scientists as to what lithologies make up the upper lunar mantle, and where they may have been exposed on the surface. We review dynamical models of lunar differentiation in the context of recent experiments and spacecraft data, assessing candidate lithologies, their distribution, and implications for lunar evolution.

Geochemistry↗
NASA NTRS1991

Relaxation processes in a low-order three-dimensional magnetohydrodynamics model

The time asymptotic behavior of a Galerkin model of 3D magnetohydrodynamics (MHD) has been interpreted using the selective decay and dynamic alignment relaxation theories. A large number of simulations has been performed that scan a parameter space defined by the rugged ideal invariants, including energy, cross helicity, and magnetic helicity. It is concluded that time asymptotic state can be interpreted as a relaxation to minimum energy. A simple decay model, based on absolute equilibrium theory, is found to predict a mapping of initial onto time asymptotic states, and to accurately describe the long time behavior of the runs when magnetic helicity is present. Attention is also given to two processes, operating on time scales shorter than selective decay and dynamic alignment, in which the ratio of kinetic to magnetic energy relaxes to values 0(1). The faster of the two processes takes states initially dominant in magnetic energy to a state of near-equipartition between kinetic and magnetic energy through power law growth of kinetic energy. The other process takes states initially dominant in kinetic energy to the near-equipartitioned state through exponential growth of magnetic energy.

Stribling, Troy↗
NASA NTRS1992

Composite intermediate case manufacturing scale-up for advanced engines

This Manufacturing Technology for Propulsion Program developed a process to produce a composite intermediate case for advanced gas turbine engines. The method selected to manufacture this large, complex part uses hard tooling for surfaces in the airflow path and trapped rubber to force the composite against the mold. Subelements were manufactured and tested to verify the selected design, tools, and processes. The most significant subelement produced was a half-scale version of a composite intermediate case. The half-scale subelement maintained the geometry and key dimensions of the full-scale case, allowing relevant process development and structural verification testing to be performed on the subelement before manufacturing the first full-scale case.

Ecklund, Rowena H.↗
NASA NTRS1992

Dimension scaling effects on the yield sensitivity of HEMT digital circuits

In our previous works, using a graphical tool, yield factor histograms, we studied the yield sensitivity of High Electron Mobility Transistors (HEMT) and HEMT circuit performance with the variation of process parameters. This work studies the scaling effects of process parameters on yield sensitivity of HEMT digital circuits. The results from two HEMT circuits are presented.

Sarker, Jogendra C.↗
NASA NTRS2003

Optimal Observations for Variational Data Assimilation

An important aspect of Ocean state estimation is the design of an observing system that allows the efficient study of climate aspects in the ocean. A solution of the design problem is presented here in terms of optimal observations that emerge as nondimensionalized singular vectors of the modified data resolution matrix. The actual computation is feasible only for scalar quantities in the limit of large observational errors. In the framework of a lo resolution North Atlantic primitive equation model it is demonstrated that such optimal observations when applied to determining the strength of the volume and heat transport across the Greenland-Scotland ridge, perform significantly better than traditional section data. On seasonal to inter-annual time-scales optimal observations are located primarily along the continental shelf and information about heat-transport, wind stress and stratification is being communicated via boundary waves and advective processes. On time-scales of about a month, sea surface height observations appear to be more efficient in reconstructing the cross-ridge heat transport than hydrographic observations. Optimal observations also provide a tool for understanding how the ocean state is effected by anomalies of integral quantities such as meridional heat transport.

Koehl, Armin↗
NASA NTRS2004

Granular Materials and the Risks They Pose for Success on the Moon and Mars

Working with soil, sand, powders, ores, cement and sintered bricks, excavating, grading construction sites, driving off-road, transporting granules in chutes and pipes, sifting gravel, separating solids from gases, and using hoppers are so routine that it seems straightforward to do it on the Moon and Mars as we do it on Earth. This paper brings to the fore how little these processes are understood and the millennia-long trial-and-error practices that lead to today's massive over-design, high failure rate, and extensive incremental scaling up of industrial processes because of the inadequate predictive tools for design. We present a number of pragmatic scenarios where granular materials play a role, the risks involved, and what understanding is needed to greatly reduce the risks.

Wilkinson, R. Allen↗
NASA NTRS2007

ANOPP Landing Gear Noise Prediction Comparisons to Model-scale Data

The NASA Aircraft NOise Prediction Program (ANOPP) includes two methods for computing the noise from landing gear: the "Fink" method and the "Guo" method. Both methods have been predominately validated and used to predict full-scale landing gear noise. The two methods are compared, and their ability to predict the noise for model-scale landing gear is investigated. Predictions are made using both the Fink and Guo methods and compared to measured acoustic data obtained for a high-fidelity, 6.3%-scale, Boeing 777 main landing gear. A process is developed by which full-scale predictions can be scaled to compare with model-scale data. The measurements were obtained in the NASA Langley Quiet Flow Facility for a range of Mach numbers at a large number of observer polar (flyover) and azimuthal (sideline) observer angles. Spectra and contours of the measured sound pressure levels as a function of polar and azimuthal angle characterize the directivity of landing gear noise. Comparisons of predicted noise spectra and contours from each ANOPP method are made. Both methods predict comparable amplitudes and trends for the flyover locations, but deviate at the sideline locations. Neither method fully captures the measured noise directivity. The availability of these measured data provides the opportunity to further understand and advance noise prediction capabilities, particularly for noise directivity.

Burley, Casey L.↗
NASA NTRS2013

Materials Manufactured from 3D Printed Synthetic Biology Arrays

Many complex, biologically-derived materials have extremely useful properties (think wood or silk), but are unsuitable for space-related applications due to production, manufacturing, or processing limitations. Large-scale ecosystem-based production, such as raising and harvesting trees for wood, is impractical in a self-contained habitat such as a space station or potential Mars colony. Manufacturing requirements, such as the specialized equipment needed to harvest and process cotton, add too much upmass for current launch technology. Cells in nature are already highly specialized for making complex biological materials on a micro scale. We envision combining these strengths with the recently emergent technologies of synthetic biology and 3D printing to create 3D-structured arrays of cells that are bioengineered to secrete different materials in a specified three-dimensional pattern.

Gentry, Diana↗
NASA NTRS1994

Gravitational collapse of small-scale structure as the origin of the Lyman-alpha forest

If gravitational clustering is a hierarchical process, the present large-scale structure of the galaxy distribution implies that structures on smaller scales must have formed at high redshift. We simulate the formation of small-scale structure (average cell mass: (delta) bar m(sub b) = 10(sup 4.2) solar mass) and the evolution of photoionized gas, in the specific case of the CDM + Lambda model. The photoionized gas has a natural minimal scale of collapse, the Jeans scale (m(sub b,J) is approximately equal to 10(exp 9) solar mass). We find that low column density (N(sub HI) is less than or equal to 10(exp 14)/sq cm) lines originate in regions resembling Zel'dovich pancakes, where gas with overdensities in the range 3-30 is enclosed by two shocks but is typically reexpanding at approximately the Hubble velocity. However, higher column density lines stem from more overdense regions where the shocked gas is cooling. We show that this model can probably account for the observed number of lines, their distribution in column density and b-parameters, as well as the cloud physical sizes as observed in gravitationally lensed quasars. We find a redshift evolution that is too steep; however, this may be due to insufficient dynamical range in the simulation or because the specific model is incorrect. The model predicts that high signal-to-noise observations should find systematic deviations from Voigt profiles, mainly in the form of broad wings in the line profiles, and that a fluctuating Gunn-Peterson effect will be detected, which can be modeled as a superposition of weak lines with a wide range of b-parameters.

Cen, Renyue↗
NASA NTRS1999

Managing the Moon Program: Lessons Learned from Project Apollo

There have been many detailed historical studies of the process of deciding on and executing the Apollo lunar landing during the 1960s and early 1970s. From the announcement of President John F Kennedy on May 25, 1961, of his decision to land an American on the Moon by the end of the decade, through the first lunar landing on July 20, 1969, on to the last of six successful Moon landings with Apollo 17 in December 1972, NASA carried out Project Apollo with enthusiasm and aplomb. While there have been many studies recounting the history of Apollo, at the time of the 30th anniversary of the first lunar landing by Apollo 11, it seems appropriate to revisit the process of large-scale technological management as it related to the lunar mission. Consequently, the NASA History Office has chosen to publish this monograph containing the recollections of key partcipants in the management process. The collective oral history presented here was recorded in 1989 at the Johnson Space Center's Gilruth Recreation Center in Houston, Texas. It includes the recollections of key participants in Apollo's administration, addressing issues such as communication between field centers, the prioritization of technological goals, and the delegation of responsibility. The following people participated: George E. Muller, Owen W. Morris, Maxime A. Faget, Robert R. Gilruth, Christopher C. Kraft, and Howard W. (Bill) Tindall. The valuable perspectives of these individuals deepen and expand our understanding of this important historical event. This is the 14th in a series of special studies prepared by the NASA History Office. The Monographs in Aerospace History series is designed to provide a wide variety of investigations relative to the history of aeronautics and space. These publications are intended to be tightly focused in terms of subject, relatively short in length, and reproduced in an inexpensive format to allow timely and broad dissemination to researchers in aerospace history.

Source record↗
NASA NTRS2002

Self-Consistent Magnetosphere-Ionosphere Coupling and Associated Plasma Energization Processes

Magnetosphere-Ionosphere (MI) coupling and associated with this process electron and ion energization processes have interested scientists for decades and, in spite of experimental and theoretical research efforts, are still ones of the least well known dynamic processes in space plasma physics. The reason for this is that the numerous physical processes associated with MI coupling occur over multiple spatial lengths and temporal scales. One typical example of MI coupling is large scale ring current (RC) electrodynamic coupling that includes calculation of the magnetospheric electric field that is consistent with the ring current (RC) distribution. A general scheme for numerical simulation of such large-scale magnetosphere-ionosphere coupling processes has been presented earlier in many works. The mathematical formulation of these models are based on "modified frozen-in flux theorem" for an ensemble of adiabatically drifting particles in the magnetosphere. By tracking the flow of particles through the inner magnetosphere, the bounce-averaged phase space density of the hot ions and electrons can be reconstructed and the magnetospheric electric field can be calculated such that it is consistent with the particle distribution in the magnetosphere. The new a self-consistent ring current model has been developed that couples electron and ion magnetospheric dynamics with calculation of electric field. Two new features were taken into account in addition to the RC ions, we solve an electron kinetic equation in our model, self-consistently including these results in the solution. Second, using different analytical relationships, we calculate the height integrated ionospheric conductances as the function of precipitated high energy magnetospheric electrons and ions as produced by our model. This results in fundamental changes to the electric potential pattern in the inner magnetosphere, with a smaller Alfven boundary than previous potential formulations would predict but one consistent with recent satellite observations. This leads to deeper penetration of the plasma sheet ions and electrons into the inner magnetosphere and more effective ring current ions and electron energization.

Khazanov, G. V.↗
NASA NTRS2012

Continental-scale Validation of MODIS-based and LEDAPS Landsat ETM+ Atmospheric Correction Methods

The potential of Landsat data processing to provide systematic continental scale products has been demonstrated by several projects including the NASA Web-enabled Landsat Data (WELD) project. The recent free availability of Landsat data increases the need for robust and efficient atmospheric correction algorithms applicable to large volume Landsat data sets. This paper compares the accuracy of two Landsat atmospheric correction methods: a MODIS-based method and the Landsat Ecosystem Disturbance Adaptive Processing System (LEDAPS) method. Both methods are based on the 6SV radiative transfer code but have different atmospheric characterization approaches. The MODIS-based method uses the MODIS Terra derived dynamic aerosol type, aerosol optical thickness, and water vapor to atmospherically correct ETM+ acquisitions in each coincident orbit. The LEDAPS method uses aerosol characterizations derived independently from each Landsat acquisition and assumes a fixed continental aerosol type and uses ancillary water vapor. Validation results are presented comparing ETM+ atmospherically corrected data generated using these two methods with AERONET corrected ETM+ data for 95 10 km×10 km 30 m subsets, a total of nearly 8 million 30 m pixels, located across the conterminous United States. The results indicate that the MODIS-based method has better accuracy than the LEDAPS method for the ETM+ red and longer wavelength bands.

Landsat↗
NASA NTRSDate not supplied

Exploring Radiation, Water and Energy Closure in Key Deep Tropical Regions Over the Last 3 Decades

The closure of global energy and water budgets at various time scales depends heavily upon the on the processes of water and energy exchange in the deep tropics. A key process observed is the change in convection regimes from disorganized convection to organized deep convection. During these periods an imbalance in key tropical regions is observed of water budget terms between observations and atmospheric reanalysis systems, implying that processes are not simulated well. For instance, periods of imbalance in the water budget may be at least partly attributed to precipitation estimates due to the transition between cloud and precipitation systems in which ice cloud affects microwave radar estimates (Lietmann-Niimi et al. 2024, submitted). A recent paper by Hsaio et al (2023, pre-published version) found that the transition process is characterized by wind shear and longwave cloud radiative feedback signatures as well. This is just one example how these processes also affect the radiative fluxes and thus the energy budget at the TOA. In this presentation, we assess the net radiative budget and components in the deep tropics by comparing multiple data products (GEWEX SRB Rel4IP, CERES EBAF/SYN1deg Ed4.2, ISSCP FH, etc.) and describing the temporal variability of energy balance terms across the deep tropics for the period from 1988 to near present in six key oceanic regions. These six key tropical oceanic regions are West Indian Ocean, the south Indian Ocean east, tropical western, central and eastern Pacific Ocean, and Tropical Atlantic Ocean. In these regions we assess the sensitivity of the fluxes as a function of fluctuations in cloud types in response to various larger scale atmospheric processes (e.g. El Niño, Indian Ocean Dipole). We assess this variability of the radiative flux anomalies (including the net TOA, surface and the atmospheric divergence fluxes) against water vapor divergence, cloud properties (include ISCCP “Weather States, Tselioudis et al. 2021) and larger scale wind shear to assess the uncertainties of energy closure in these regions. These are contrasted against the modeled radiative fluxes from ERA-5 and MERRA-2. Ocean buoy measurements of radiative fluxes are utilized to help assess data radiative flux uncertainty over the nearly 40 year period. In general, the variability for overlap periods of these various data products agrees well, but there are significant differences in the net fluxes that vary according to the rendering of surface, atmospheric, aerosol and cloud properties. These differences also affect closure terms and inferences on systematic uncertainties within the observational estimates. We conclude with recommendations for continuing work

Radiation budget↗
NASA NTRS1979

Silicon material task - Low cost solar array project /JPL/DOE/

The paper describes the silicon material task of the low-cost solar array project, which has the objective of establishing a silicon production capability equivalent to 500 mW per year at a price less than 10 dollars/kg (1975 dollars) in 1986. The task program is divided into four phases: technical feasibility, scale-up studies (the present phase), experimental process system development units, and implementation of large-scale production plants, and it involves the development of processes for two groups of materials, that is, semiconductor grade and solar cell grade. In addition, the effects of impurities on solar cell performance are being investigated. Attention is given to problem areas of the task program, such as environmental protection, material compatibility between the reacting chemicals and materials of construction of the equipment, and waste disposal.

Lutwack, R.↗
NASA NTRS1992

Atmospheric effects on crater growth on Venus

Laboratory experiments allow examining the consequences of complex processes operating over a wide range of scales (both temporal and spatial) and frequently reveal effects that are obvious only in hindsight. Even though all processes may not scale directly, isolation of the controlling variables allows assessing first-order effects through analytical approximations. This approach can be illustrated by the systematic sequence of ballistic ejection, the response of an atmosphere to a strong energy source, the scaling of ejecta thickness, and the role of secondary cratering. Here it is proposed that the effects of atmospheric pressure and density on crater growth (hence, scaling) observed in laboratory experiments has particular relevance for craters on Venus.

Schultz, Peter H.↗