Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Power distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

TPCPF: Three-Phase Continuation Power Flow Tool for Voltage Stability Assessment of Distribution Networks With Distributed Energy Resources

This article presents a three-phase unbalanced continuation power flow algorithm for voltage stability assessment of distribution systems with high penetration of distributed energy resources (DERs). Analyzing distribution system voltage stability with DER will allow high penetration of renewable energy necessary for the sustainability goals. The developed algorithm can analyze voltage stability for both the meshed and radial systems and the balanced and unbalanced three-phase distribution systems. The developed tool allows the voltage stability analysis to facilitate the planning, operation, control, and distribution system management. The impact of DER on the voltage stability of several test cases has been analyzed considering constant power (P Q) and regulated-voltage (P V ) modes of operation for DER units. Moreover, different voltage stability case studies are presented to demonstrate the impact of unbalance, load increment, and network topology on the maximum loading capacity. Finally, results using the IEEE 13-node feeder, the 18-bus balanced shipboard system, the 13-node CIGRE benchmark system, and the 136-bus redial distribution feeder demonstrate that the developed continuation power flow tool can efficiently perform voltage stability analysis for active distribution systems.

42 ENGINEERING↗
DOE OSTI2023

2021 Cost of Wind Energy Review [Slides]

This analysis uses representative utility-scale and distributed wind energy projects to estimate the levelized cost of energy (LCOE) for land-based, offshore, and distributed wind power in the United States. Data and results detailed here are derived from 2021 commissioned plants and representative industry data as well as state-of-the-art modeling capabilities. Modeling is conducted to provide more granular detail on specific cost categories. This study represents the 11th annual installment and is intended to provide insight into current component-level costs as well as a basis for understanding variability in wind energy LCOE across the country.

17 WIND ENERGY↗
DOE OSTI2025

Key Design Trades for a Near-term Lunar Fission Surface Power System

NASA and DOE have been developing concepts for lunar and Mars Fission Surface Power (FSP) systems for decades and have considered many different technologies and system variations. In 2023, three contractor teams completed Phase 1 conceptual design studies on a 40 kWe lunar FSP system in response to a modest set of NASA requirements and goals. A government team consisting of NASA Glenn Research Center (GRC), Los Alamos National Laboratory (LANL), and Idaho National Laboratory (INL) was formed to develop an independent design approach that adhered to the same requirements and goals posed to the contractor teams. GRC provided expertise, analysis, and design decisions for the power conversion, heat rejection, power management & distribution (PMAD), and mission integration. LANL and INL provided expertise, analysis, and design decisions for the reactor and shielding. The goal of the government study was to develop representative concepts that could be used in NASA architecture studies, guide government technology investments, and inform Phase 2 requirements definition. This paper provides a summary of the key technology options, system-level trades, and mission-level concept-of-operations.

99 - GENERAL AND MISCELLANEOUS↗
DOE OSTI2026

Towards fully predictive gyrokinetic full- f simulations: validation and triangularity studies in TCV

Designing economical magnetic confinement fusion power plants motivates computational tools that can estimate plasma behavior from engineering parameters without direct reliance on experimental measurement of the plasma profiles. In this work, we present full-f global long-wavelength gyrokinetic simulations of edge and scrape-off layer turbulence in tokamaks that use only magnetic geometry, heating power, and particle inventory as inputs. Unlike many modeling approaches that employ free parameters fitted to experimental data, raising uncertainties when extrapolating to reactor scales. This approach directly simulates turbulence and resulting profiles through gyrokinetics without such empirical adjustments. This is achieved via an adaptive sourcing algorithm in Gkeyll that strictly controls energy injection and emulates particle sourcing due to neutral recycling. We show that the simulated kinetic profiles compare reasonably well with Thomson scattering and Langmuir probe data for Tokamak á Configuration Variable (TCV) discharge #65125, and that the simulations reproduce characteristic features such as blob transport and self-organized electric fields. Applying the same framework to study triangularity effects suggests mechanisms contributing to the improved confinement reported for negative triangularity (NT). Simulations of TCV discharges #65125 and #65130 indicate that NT increases the E x B flow shear (by about 20% in these cases), which correlates with reduced turbulent losses and a modest change in the distribution of power exhaust to the vessel wall. While the physical models contain approximations that can be refined in future work, the predictive capability demonstrated here, evolving multiple profile relaxation times with kinetic electron and ion models in hundreds of GPU hours, indicates the feasibility of using Gkeyll to support design studies of fusion devices.

Hoffmann, Antoine Cyril David [Princeton Plasma Ph↗
DOE OSTI2025

Reinforcement Learning‐Based Adaptation of Grid Following Inverter's Internal Controller to Networked Microgrids' Strengths

The varying topological configurations, generator commitments and dispatches, and dynamic load demand lead to changing system's strengths during the operations of networked microgrids. When the system's strengths significantly change, the fixed control gains at large devices may result in unsatisfactory system performance; this necessitates the tuning of the control gains at large devices to adapt to the changing system's strengths. In this paper, observer-based reinforcement learning (RL) is utilised to automatically tune the proportional-integral (PI) gains of phase lock loop (PLL) controller of grid-following (GFL) inverters to adapt to the changing strengths of microgrids and networked microgrids. The RL agent in this framework augments an observer predicting system's strengths, from which the RL control policy will adjust accordingly to tune the PLL controller's gains towards the system's strengths. Also, to enhance the control performance, the recently introduced Barrier function-based RL framework is leveraged for the design of reward function to prevent the high frequency nadir. An operational 26 kV electric distribution system, which is modelled as networked microgrids, is used to illustrate the need and effectiveness of the proposed RL-tuned control.

frequency response↗
DOE OSTI2022

VERA neutronics high-fidelity benchmark for a modern PWR core design

Nearly 20 years since the origin of the infamous 'Kord Smith Challenge', and after 10 years and hundreds of millions of dollars invested by the US Department of Energy into the development of the Virtual Environment for Reactor Applications (VERA), the capability to accurately simulate a modern pressurized water reactor (PWR) fuel cycle at the fuel rod level with high-fidelity Monte Carlo (MC) stochastic transport methods still evades us. The deterministic methods in VERA make approximations that allow it to be successfully benchmarked against measured data from hundreds of PWR fuel cycles, but none of these benchmarks provided information at the local fuel rod level or allowed quantification of these approximations' impact for modern PWR reload designs. Using MPACT to establish the estimated isotopic distributions and thermal hydraulic conditions in a recent and challenging reactor design, a 2D quarter-core benchmark problem was established and solved consistently with both MPACT, the 51-energy group deterministic transport solver in VERA, and Shift, the continuous-energy MC transport solver in VERA. Impacts of energy groups, ray spacing, and scattering treatment were evaluated. Though MPACT has been previously shown to perform well compared to MC methods for initial Cycle 1 cores with only fresh fuel, this is the first benchmark of MPACT for a challenging modern reload core with depleted fuel and burnable absorbers. This work establishes additional credibility for the methods in MPACT and highlights the efficiency of these methods relative to those in use by MC-based tools. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Post-Disturbance Dynamic Distribution System Restoration with DGs and Mobile Resources

Distributed generations (DGs) can act as emergency power supplies when distribution systems suffer from outages. However, the generation capabilities of DGs are generally limited by a number of factors including weather conditions, fuel limitations, etc. In this context, mobile resources that are able to reallocate resources to desired locations are regarded as important complements to conventional fixed DGs in assisting distribution system restoration. In this paper, a distribution system restoration model with DGs and mobile resources is proposed. Firstly, the dispatch and allocation of mobile resources are modeled with respect to the characteristics of the traffic network. Then the developed mobile resource models are integrated into the distribution system restoration model to co-optimize the scheduling of DGs and mobile resources. Uncertainty factors are managed by a model predictive control approach so that system operators can dynamically adjust the restoration strategy with the up-to-date information. The effectiveness of the proposed method is validated through an IEEE 13-bus test system.

distributed generations (DGs)↗
DOE OSTI2021

Moduli stabilisation and the statistics of axion physics in the landscape

String theory realisations of the QCD axion are often said to belong to the anthropic window where the decay constant is around the GUT scale and the initial misalignment angle has to be tuned close to zero. In this paper we revisit this statement by studying the statistics of axion physics in the string landscape. We take moduli stabilisation properly into account since the stabilisation of the saxions is crucial to determine the physical properties of the corresponding axionic partners. We focus on the model-independent case of closed string axions in type IIB flux compactifications and find that their decay constants and mass spectrum feature a logarithmic, instead of a power-law, distribution. In the regime where the effective field theory is under control, most of these closed string axions are ultra-light axion-like particles, while axions associated to blow-up modes can naturally play the role of the QCD axion. Hence, the number of type IIB flux vacua with a closed string QCD axion with an intermediate scale decay constant and a natural value of the misalignment angle is only logarithmically suppressed. In a recent paper we found that this correlates also with a logarithmic distribution of the supersymmetry breaking scale, providing the intriguing indication that most, if not all, of the phenomenologically interesting quantities in the string landscape might feature a logarithmic distribution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Impact of artificial topological changes on flow and transport through fractured media due to mesh resolution

Abstract We performed a set of numerical simulations to characterize the interplay of fracture network topology, upscaling, and mesh refinement on flow and transport properties in fractured porous media. We generated a set of generic three-dimensional discrete fracture networks at various densities, where the radii of the fractures were sampled from a truncated power-law distribution, and whose parameters were loosely based on field site characterizations. We also considered five network densities, which were defined using a dimensionless version of density based on percolation theory. Once the networks were generated, we upscaled them into a single continuum model using the upscaled discrete fracture matrix model presented by Sweeney et al. (2019). We considered steady, isothermal pressure-driven flow through each domain and then simulated conservative, decaying, and adsorbing tracers using a pulse injection into the domain. For each simulation, we calculated the effective permeability and solute breakthrough curves as quantities of interest to compare between network realizations. We found that selecting a mesh resolution such that the global topology of the upscaled mesh matches the fracture network is essential. If the upscaled mesh has a connected pathway of fracture (higher permeability) cells but the fracture network does not, then the estimates for effective permeability and solute breakthrough will be incorrect. False connections cannot be eliminated entirely, but they can be managed by choosing appropriate mesh resolution and refinement for a given network. Adopting octree meshing to obtain sufficient levels of refinement leads to fewer computational cells (up to a 90% reduction in overall cell count) when compared to using a uniform resolution grid and can result in a more accurate continuum representation of the true fracture network.

58 GEOSCIENCES↗
DOE OSTI2024

Evolution of highly multimodal Rayleigh–Taylor instabilities

Rayleigh–Taylor (RT) instabilities are important fluid instabilities that arise in inertial confinement fusion (ICF) capsule implosions, and many other contexts. Multi-mode coupling is observed in experiments and plays a substantial role in material mix from RT instabilities. In this work, we study the evolution of highly multimodal perturbations (power law distribution) that approximate those found at manufactured material interfaces. We use simulations of over 2000 different perturbations in the LANL code xRAGE to identify distinct phases in the processes of bubble growth and bubble merger which can be visualized in a 2D phase portrait with clear regimes of mode growth and decay. Our results show that the dynamic evolution of the instability strongly depends on the mode of the perturbations and mode interactions. The merger process accelerates bubble growth. A non-Markovian region and a transition of the instability from: (1) initial exponential growth to (2) linear growth and to (3) quadratic growth and asymptotic behavior, are clearly captured in the phase space. We have developed a quantitative model of bubble growth that reproduces the dynamic behavior of ensembles of perturbations. Implications for ICF capsules designed for robustness against instabilities are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Computational design of microarchitected porous electrodes for redox flow batteries

Porous electrodes are used as the core reactive component across electrochemical technologies. In flowing systems, controlling the fluid distribution, species transport, and reactive environment is critical to attaining high performance. However, conventional electrode materials like felts and papers provide few opportunities for precise engineering of the electrode and its microstructure. To address these limitations, architected electrodes composed of unit cells with spatially varying geometry determined via computational optimization are proposed. Resolved simulation is employed to develop a homogenized description of the constituent unit cells. These effective properties serve as inputs to a continuum model for the electrode when used in the negative half-cell of a vanadium redox flow battery. Porosity distributions minimizing power loss are then determined via computational design optimization to generate architected porosity electrodes. The architected electrodes are compared to bulk, uniform porosity electrodes and found to lead to increased power efficiency across operating flow rates and currents. The design methodology is further used to generate a scaled-up electrode with comparable power efficiency to the bench-scale systems. Finally, the variable porosity architecture and computational design methodology presented here thus offers a novel pathway for automatically generating spatially engineered electrode structures with improved power performance.

25 ENERGY STORAGE↗
DOE OSTI2020

Flow Channeling in Fracture Networks: Characterizing the Effect of Density on Preferential Flow Path Formation

Flow channelization is a commonly observed phenomenon in fractured subsurface media where the flow of fluids is restricted primarily to highly transmissive fracture networks surrounded by a low-permeability rock matrix. The multiscale structural heterogeneity of these networks results in multiscale flow channelization where preferential flow paths form at length scales ranging from the entire system down to the subfracture size. We present an analysis of how one of the largest scales in fractured media, the network density, influences the degree of flow channeling that occurs using an ensemble of semigeneric three-dimensional discrete fracture network (DFN) simulations. We construct 10 DFNs, whose fracture lengths follow a power law distribution, at four densities for a total of 40 networks. We characterize their structure in terms of the network topology and geometry. Eulerian and Lagrangian observations of the steady-state flow fields obtained within the networks are used to quantify the degree of flow channelization at the network scale. We introduce a measure for the importance-ranking/hierarchy of different flow paths in the network using graph-based analysis of Lagrangian transport by which the degree of flow channeling between networks is compared. These flow observations are then linked to the structural properties of the networks. In general, network-scale flow channeling decreases as the network density increases. However, at low densities, there is more uniform flow within the entire connected network than in high-density networks. We also demonstrate how standard transport observables can be used to infer the degree of flow channelization occurring within a fracture network.

58 GEOSCIENCES↗
DOE OSTI2022

Role of Ocean and Atmosphere Variability in Scale-Dependent Thermodynamic Air-Sea Interactions

This study investigates the influence of oceanic and atmospheric processes in extratropical thermodynamic air-sea interactions resolved by satellite observations (OBS) and by two climate model simulations run with eddy-resolving high-resolution (HR) and eddy-parameterized low-resolution (LR) ocean components. Here, in this work, spectral methods are used to characterize the sea surface temperature (SST) and turbulent heat flux (THF) variability and co-variability over scales between 50 and 10,000 km and 60 days to 80 years in the Pacific Ocean. The relative roles of the ocean and atmosphere are interpreted using a stochastic upper-ocean temperature evolution model forced by noise terms representing intrinsic variability in each medium, defined using climate model data to produce realistic rather than white spectral power density distributions. The analysis of all datasets shows that the atmosphere dominates the SST and THF variability over zonal wavelengths larger than ~2,000–2,500 km. In HR and OBS, ocean processes dominate the variability of both quantities at scales smaller than the atmospheric first internal Rossby radius of deformation (R 1 , ~600–2,000 km) due to a substantial ocean forcing coinciding with a weaker atmospheric modulation of THF (and consequently of SST) than at larger scales. The ocean forcing also induces oscillations in SST and THF with periods ranging from intraseasonal to multidecadal, reflecting a red spectrum response to ocean forcing similar to that driven by atmospheric forcing. Such features are virtually absent in LR due to a weaker ocean forcing relative to HR.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

A Comparison of Linear Solvers for Resolving Flow in Three-Dimensional Discrete Fracture Networks

We compare various methods for resolving steady flow within three-dimensional discrete fracture networks, including direct methods, Krylov subspace methods with and without preconditioning, and multi-grid methods. We compared the performance of the methods based on compute times and scaling of the solution as a function of the number of grid nodes and log-variance of the hydraulic aperture. The methods are applied to three test cases: (a) variable density of networks with a truncated power-law distribution of fracture lengths, (b) a fixed network composed of monodisperse fracture sizes but varied permeability/aperture heterogeneity, (c) and a network based on field site in Nevada, US. We chose these cases to allow us to study the impact of the mesh size and flow properties, as well as to demonstrate our conclusions on a large-scale, realistic problem (more than 40 million mesh nodes). A direct solution using Cholesky factorization outperformed other methods for every example but was closely followed in performance by some algebraic multigrid (AMG) preconditioned Krylov subspace methods. Among the Krylov methods, conjugate gradients (CG) with an AMG preconditioner performs the best. Generally, Cholesky factorization is recommended, but CG with an AMG preconditioner may be suitable for very large problems beyond 40 million nodes where the entire linear system cannot reside in memory.

58 GEOSCIENCES↗
DOE OSTI2023

Detecting Permafrost Active Layer Thickness Change From Nonlinear Baseflow Recession

We report permafrost underlies about one fifth of the global land area and affects ground stability, freshwater runoff, soil chemistry, and surface-atmosphere gas exchange. The depth of thawed ground overlying permafrost (active layer thickness) has broadly increased across the Arctic in recent decades, coincident with a period of increased streamflow, especially the lowest flows (baseflow). Mechanistic links between active layer thickness and baseflow have recently been explored using linear reservoir theory, but most watersheds behave as nonlinear reservoirs. We derive theoretical nonlinear relationships between long-term average saturated soil thickness $\bar{η}$(proxy for active layer thickness) and long-term average baseflow. When applied to 38 years of daily streamflow data for the Kuparuk River basin on the North Slope of Alaska, the theory predicts $\bar{η}$ increased 0.17 ± 0.22[2σ] cm a -1 between 1983 and 2020 (6.4 ± cm total). The rate of increase nearly doubled to 0.29 ± 0.31 cm a -1 between 1990 and 2020, during which time local field measurements from Circumpolar Active Layer Monitoring sites indicate the active layer increased 0.31 ± 0.22 cm a -1 . The predicted rate of increase more than doubled again between 2002 and 2020, outpacing a near doubling of observed active layer thickening, consistent with trends in terrestrial water storage inferred from Gravity Recovery and Climate Experiment satellite gravimetry and Modern-Era Retrospective Analysis for Research and Applications climate reanalysis. Overall, hydrologic change is accelerating in the Kuparuk River basin, and we provide a theoretical framework for estimating basin-scale changes in active layer water storage from streamflow measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Intrinsic donor-bound excitons in ultraclean monolayer semiconductors

The monolayer transition metal dichalcogenides are an emergent semiconductor platform exhibiting rich excitonic physics with coupled spin-valley degree of freedom and optical addressability. Here, we report a new series of low energy excitonic emission lines in the photoluminescence spectrum of ultraclean monolayer WSe 2 . These excitonic satellites are composed of three major peaks with energy separations matching known phonons, and appear only with electron doping. They possess homogenous spatial and spectral distribution, strong power saturation, and anomalously long population (>6 µs) and polarization lifetimes (>100 ns). Resonant excitation of the free inter- and intravalley bright trions leads to opposite optical orientation of the satellites, while excitation of the free dark trion resonance suppresses the satellites' photoluminescence. Defect-controlled crystal synthesis and scanning tunneling microscopy measurements provide corroboration that these features are dark excitons bound to dilute donors, along with associated phonon replicas. Our work opens opportunities to engineer homogenous single emitters and explore collective quantum optical phenomena using intrinsic donor-bound excitons in ultraclean 2D semiconductors.

36 MATERIALS SCIENCE↗