SEARCH · Engineering Papers

Results for “Plugs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Space shuttle orbit maneuvering engine reusable thrust chamber. Task 13: Subscale helium ingestion and two dimensional heating test report

Descriptions are given of the test hardware, facility, procedures, and results of electrically heated tube, channel and panel tests conducted to determine effects of helium ingestion, two dimensional conduction, and plugged coolant channels on operating limits of convectively cooled chambers typical of space shuttle orbit maneuvering engine designs. Helium ingestion in froth form, was studied in tubular and rectangular single channel test sections. Plugged channel simulation was investigated in a three channel panel. Burn-out limits (transition of film boiling) were studied in both single channel and panel test sections to determine 2-D conduction effects as compared to tubular test results.

Tobin, R. D.↗

NASA NTRS1976

Flight velocity effects on exhaust noise of a wedge nozzle installed on an underwing nacelle on an F-106 airplane

It is important to know whether the relatively high takeoff speeds of supersonic transport aircraft will change the exhaust noise levels of nozzles from those measured at static conditions. To gain some insight into this question, a modified F-106B aircraft was used to conduct flyover and static tests on a wedge nozzle. Flight velocity had an adverse effect on exhaust noise when compared with static results at the same relative jet velocity but a beneficial effect when compared with static results at the same absolute jet velocity. The wedge nozzle, which has a two-dimensional wedge surface rather than an axisymmetric plug surface, had a higher peak flyover noise level than the plug nozzle.

Burley, R. R.↗

NASA NTRS1976

Percutaneous connector device

A device is reported for facilitating the passage of electrical signals from an external source through the skin of a patient to internal portions of the body such as muscles and nerves. The connector device includes a bio-compatible shell having an enlarged disk shaped portion for being implanted below the skin of the patient. The shell has a first and second electrically conductive post carried therein upon which a plug can be readily connected and disconnected. A modified form of the invention utilizes a unipolar connector that is adapted to be plugged into a shell implanted below the skin of a patient. Both of the connector devices are designed to be separated when a predetermined force is applied. This prevents excessive force from being applied to the implanted bio-compatible shell.

Parsons, W. E.↗

NASA NTRS1977

Magnetic electrical connectors for biomedical percutaneous implants

A biomedical percutaneous connector is described which includes a socket having an enlarged disk shaped base portion for being implanted below the patient's skin and cylindrical portion which is integral with the base portion and extends outwardly of the skin. A conical recess in an upper end of the cylindrical portion has a magnet located in the base. Inclined conductive strips are carried on an upper end of the cylindrical portion to which electrical conductors are attached and extend into the patient's body. A complementary shaped plug which also has electrical contacts provided thereon is adapted to fit within the conical recess of the socket. The plug is held in the socket by magnetic force.

Owens, L. J.↗

NASA NTRS1977

An empirical model for inverted-velocity-profile jet noise prediction

It is known that the noise generated by inverted-velocity-profile coaxial (without center plug) and coannular (with center plug) nozzles should be modeled as the combined contributions of various source regions and noise generation mechanisms. In this paper, an empirical noise-prediction model is described which considers the noise generated by two jet-mixing regions and two potential regions of shock/turbulence interaction. Results calculated from the empirical model are compared with model-scale experimental data for static and simulated flight conditions. These comparisons are made for cases where both streams are subsonic, where the outer stream is supersonic with the inner stream subsonic, and where both streams are supersonic. The cases considered cover a range of inner-to-outer-stream area ratios and include both coaxial and coannular nozzles. It is shown that the model gives reasonable predictions of absolute noise spectra and even better predictions of incremental changes.

Stone, J. R.↗

NASA NTRS1980

Isolator/retainer for connectors

Double-ended cap holds mating plugs and receptacle, preventing electrical contact between them when not in use. Cap maintains continuous electrical ground between plug and receptacle protecting against electromagnetic-interference pickup. Device is also useful for isolation of sensitive circuits from each other during storage, transit, or testing.

Alpenia, J. L.↗

NASA NTRS1981

Reshaping tube ends for welding

Tube ends are rounded in preparation for welding by new semiautomatic tool. Tubes that have been trimmed close to bend may be deformed by process. To restore roundness, out-of-round tube is opened, plug inserted, and crimper compresses tube into proper shape around plug.

Emanuel, W. H.↗

NASA NTRS1979

Exhaust emission reduction for intermittent combustion aircraft engines

Three concepts for optimizing the performance, increasing the fuel economy, and reducing exhaust emission of the piston aircraft engine were investigated. High energy-multiple spark discharge and spark plug tip penetration, ultrasonic fuel vaporization, and variable valve timing were evaluated individually. Ultrasonic fuel vaporization did not demonstrate sufficient improvement in distribution to offset the performance loss caused by the additional manifold restriction. High energy ignition and revised spark plug tip location provided no change in performance or emissions. Variable valve timing provided some performance benefit; however, even greater performance improvement was obtained through induction system tuning which could be accomplished with far less complexity.

Moffett, R. N.↗

NASA NTRS1982

Integrated Structural and Cable Connector

Ball-and-socket coupling includes fiber-optic cable. Three steps couple two parts of fiber-optic cable: ball is inserted into socket; cone is released in, and cable moves toward plug. Sleeve is pulled to end of its travel and cable and plug are mated. Device is a quick-connect/disconnect coupling that has application in hazardous environments, such as space, undersea and nuclear installations.

Totah, R. S.↗

NASA NTRS1980

Deflagration-to-detonation transition in granular HMX

Granular HMX of three degrees of fineness was packed into heavy-walled steel tubes closed at both ends. Ignition was obtained at one end using an intimate mixture of finely divided titanium and boron as an igniter that produced heat with little gas. The distance to detonation was determined by examination of the resulting tube fragments. By inserting tightly-fitted neoprene diaphragms periodically into the HMX column, it was shown that the role of convective combustion was limited to the initial stage of the deflagration to detonation (DDT) process. Experiments in which various combinations of two of the three types of HMX were loaded into the same tube showed that heating by adiabatic shear of explosive grains was an essential factor in the final buildup to detonation. A description of the DDT process is developed in which conductive burning is followed in turn by convective burning, bed collapse with plug formation, onset of accelerated burning at the front of the plug through heating by intercrystalline friction and adiabatic shear, and intense shock formation resulting in high-order detonation.

Campbell, A. W.↗

NASA NTRS1980

Effects of nozzle design on the noise from supersonic jets

The aeroacoustic supersonic performance of various internal nozzle geometries is evaluated for shock noise content over a wide range of nozzle pressure ratios. The noise emission of a Mach 1.5 and 2.0 convergent-divergent (C-D) nozzle is measured and compared to convergent nozzles. Comparisons are also made for a Mach 1.5 conical C-D nozzle and a porous plug nozzle. The Mach 1.5 conical C-D nozzle shows a small reduction in shock noise relative to the shock free case of the Mach 1.5 C-D nozzle. The Mach 1.5 C-D nozzle is found to have a wide operating nozzle pressure ratio range around its design point where shock noise remains unimportant compared to the jet mixing noise component. However it is found that the Mach 2 C-D nozzle shows no significant acoustic benefit relative to the convergent nozzle. Results from the porous plug nozzle indicate that shock noise may be completely eliminated, and the jet mixing noise reduced.

Seiner, J. M.↗

NASA NTRS1981

SRB dewatering set

The system components and operation of the space shuttle solid rocket booster (SRB) dewatering set are described. The SRB dewatering set consists of a nozzle plug, control console, remote control unit, power distribution unit, umbilical cable, interconnect cables, and various handling and storage items. The nozzle plug (NP) is a remotely controlled, tethered underwater vehicle that is launched from the retrieval vessel (RV) by a crane, descends down the side of the SRB, and is positioned below the SRB nozzle. A TV camera mounted at the top of the NP central core is used by the control console operator to visually guide the NP during descent and docking. The NP is then driven up and locked into the nozzle. Compressed air is passed through the umbilical from the RV, through the NP and into the SRB motor. The water inside the SRB is expelled causing the SRB to rotate to a near horizontal attitude on the surface of the water.

Wickham, R. E.↗

NASA NTRS1979

Lightning protection design external tank /Space Shuttle/

The possibility of lightning striking the Space Shuttle during liftoff is considered and the lightning protection system designed by the Martin Marietta Corporation for the external tank (ET) portion of the Shuttle is discussed. The protection system is based on diverting and/or directing a lightning strike to an area of the spacecraft which can sustain the strike. The ET lightning protection theory and some test analyses of the system's design are reviewed including studies of conductivity and thermal/stress properties in materials, belly band feasibility, and burn-through plug grounding and puncture voltage. The ET lightning protection system design is shown to be comprised of the following: (1) a lightning rod on the forward most point of the ET, (2) a continually grounded, one inch wide conductive strip applied circumferentially at station 371 (belly band), (3) a three inch wide conductive belly band applied over the TPS (i.e. the insulating surface of the ET) and grounded to a structure with eight conductive plugs at station 536, and (4) a two inch thick TPS between the belly bands which are located over the weld lands.

Anderson, A.↗

NASA NTRS1982

Precise Sealing of Fused-Quartz Ampoules

New technique rapidly evacuates and seals fused-quartz ampoule with precise clearance over contents without appreciably thinning ampoule walls. Quartz plug is lowered into working section of ampoule after ampoule has been evacuated. Plug is then fused to ampoule walls, forming vacuum seal. New technique maintains wall strength and pumping speed.

Debnan, W. J. J.↗

NASA NTRS1982

Detonation propulsion experiments and theory

Test data are presented for the use of a single detonation of explosives in long-cone, short-cone, straight, and firing-plug nozzles to provide propulsion in a simulated Jupiter atmosphere, as well as the ambient gases N, CO2 and He. The long-cone nozzle yielded a progressive increase with ambient pressure for the higher molecular weight gases CO2 and N, while the lower molecular weight He and simulated Jupiter atmosphere showed a specific pulse decrease with increasing ambient pressure. The short-plug nozzle yielded a small specific impulse reduction with increasing ambient pressure, and its results were found to be nearly independent of ambient gas molecular weight. All data gathered are analyzed by using first principles, approximate blast wave theory predictions, and two-dimensional numerical calculations. Rarefaction and oscillatory wave phenomena are found to significantly influence specific impulse.

Back, L. H.↗

NASA NTRS1984

Conical Electrical Connectors Aline Easily

Rotational alinement not critical in design useful for remote manipulators. Plug and socket pushed together, plug rings deflect spring segments of corresponding socket ring. Particularly suitable for remote manipulators and making connections in "blind" locations.

Clark, K. H.↗

NASA NTRS1984

Fluid/Vapor Separator for Variable Flow Rates

Shutter varies gas throughput of porous plug. Variable area exposed on porous plug allows to pass varying rates of vapor flow while blocking flow of liquid helium II from cryogenic bath. Applications in refining operations, industrial chemistry, and steam-powered equipment.

Lee, J. M.↗

NASA NTRS1982

Experiments on high bypass internal mixer nozzle jet noise

Model scale jet noise data are presented for a variety of internal lobed mixer nozzle configurations for take off power settings in a static environment. The results are presented for a 17.5 cm diameter fan nozzle to show the effect on noise levels caused by changes in geometric shape of the internal, or core flow, nozzle. The geometric variables include the lobe discharge angle, the number of lobes, spacing between the center plug and lobe valley, lobe side wall shape and axial contour of the lobes. An annular plug core flow nozzle was also tested and is used as a baseline for comparative purposes. Comparison of data from the internal lobed configurations showed that for comparative effect, in terms of the effect on full scale perceived noise levels, was caused by a change in the lobe discharge angle. The results showed that increasing the discharge angle caused an increase as large as 7 dB in sound pressure levels in the high frequency portion of the spectra. Changes in the other geometric variables cause negligible effects.

Goodykoontz, J. H.↗