Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Establishing a geochemical heterogeneity model for a contaminated vadose zone – Aquifer system

A large set of sediment samples from a 1600 m2 experimental plot within a 2.2 km2 vadose zone and groundwater uranium (VI) plume were subject to physical, chemical, and mineralogic characterization. The plot is being used for field experimentation on U(VI) recharge and transport processes within a persistent groundwater plume that exists in the groundwater-river interaction zone of the Columbia River at the U.S. DOE Hanford site. The samples were obtained during the installation of 35 tightly spaced (10 m separation) groundwater monitoring wells. The characterization measurements for each sample included total contaminant concentrations (U and Cu primarily), bicarbonate extractable U(VI), sequential 238U(VI) contaminant desorption Kd, 233U(VI) adsorption Kd, grain size distribution, surface area, extractable poorly crystalline Fe(III) oxides, and mineralogy. The characterization objective was to inform a conceptual model of coupled processes controlling the anomalous longevity of the plume, and to quantify the spatial heterogeneity of the contaminant inventory and the primary properties effecting reactive transport. Correlations were drawn between chemical, physical, and reaction properties, and Gaussian simulation was used to compute multiple 3-D realizations of extractable U(VI), the 233U(VI) adsorption Kd, and the distribution of the reactive < 2 mm fraction. Adsorbed contaminant U(VI) was highest in the vadose zone and the zone of seasonal water table fluctuation lying at its base. Adsorbed U(VI) was measureable, but low, in the groundwater plume region where very high hydraulic conductivities existed. The distribution of adsorbed U(VI) displayed no apparent correlation with sediment physical or chemical properties. Desorption [238U(IV)] and adsorption [233U(VI)] Kd values showed appreciable differences due to mass transfer controlled surface complexation and the effects of long subsurface residence times. The 233U(VI) adsorption Kd, a combined measure of surface complexation strength and site concentration, was relatively uniform throughout the domain, displaying correlation with fines distribution and surface area. The characterization results revealed U(VI) supplied to the groundwater plume through spatially heterogeneous recharge from residual contamination in the zone of seasonal water table fluctuation, and transport of U(VI) controlled by weak, kinetically-controlled surface complexation in the coarse-textured saturated zone. Geostatistical relationships for the adsorbed contaminant U distribution in the characterization domain allow an extrapolation to inventory at the plume scale, a critical unknown for remedial action.

contaminant heterogeniety, uranium groundwater plu↗

Characterizing soil preferential flow using iodine--starch staining experiments and the active region model

Thirteen iodine-starch staining experiments with different boundary conditions and measurement scales were conducted at two sites to study preferential flow processes in natural unsaturated soils. Digital imaging analyses were implemented to obtain the corresponding preferential flow patterns. The test results are used to evaluate a recently proposed active region model in terms of its usefulness and robustness for characterizing unsaturated flow processes at field scale. Test results provide useful insights into flow patterns in unsaturated soils. They show that flow pattern depends on the top boundary condition. As the total infiltrating-water depth increased form 20 mm to 80 mm for the 100 x 100 cm{sup 2} plots, the corresponding flow pattern changed from few preferential flow paths associated with a relatively small degree of stained coverage and a small infiltration depth, to a pattern characterized by a higher stained coverage and a larger infiltration depth, and to (finally) a relatively homogeneous flow pattern with few unstained area and a much larger infiltration depth. Test results also show that the preferential flow pattern became generally more heterogeneous and complex for a larger measurement scale (or size of infiltration plot). These observations support the general idea behind the active region model that preferential flow pattern in unsaturated soils are dynamic and depend on water flow conditions. Further analyses of the test results indicate that the active-region model is able to capture the major features of the observed flow pattern at the scale of interest, and the determined parameter values do not significantly depend on the test conditions (initial water content and total amount of infiltrating water) for a given test site. This supports the validity of the active region model that considers that parameter to be a property of the corresponding unsaturated soil. Results also show that some intrinsic relation seems to exist between active-fracture-model parameter and a random-cascade-model parameter. (The latter model is also developed based on the existence of the fractal flow pattern in unsaturated soils.) Furthermore, our test results demonstrate that the active-region-model parameter is not scale-dependent for a range of scales under consideration. Although further studies are needed to confirm this finding, it seems to be consistent with a consideration that some fractal parameters (e.g., fractal dimension) are universal for a large range of scales.

54 ENVIRONMENTAL SCIENCES↗

Determination of neutron irradiation temperatures of SiC using electrical resistivity method

The irradiation temperature of silicon carbide (SiC) was determined post-irradiation by examination of the recovery of the electrical resistivity due to thermal annealing in a rapid heating/cooling optical furnace. High-purity, high-resistivity grade SiC is routinely used as a passive temperature monitor in neutron irradiation studies at the High Flux Isotope Reactor (HFIR), and this paper presents an alternative automated technique for determination of the irradiation temperature the SiC experienced. Neutron collisions with the atoms results in displaced lattice atoms (interstitials) that act as electron donors yielding a significant decrease in electrical resistivity. The irradiation defects become thermodynamically unstable and start to recombine, when annealed above the irradiation temperature, resulting in a recovery of the electrical resistivity. The resistivity is measured at a fixed elevated temperature above ambient, which is below the target irradiation temperature. When the resistivity is plotted as a function of annealing temperatures, a clear increase is observed due to the recovery of irradiation defects. We have demonstrated that this electrical resistivity measurement of SiC is effective to determine irradiation temperature of SiC. In conclusion, energy levels of various defects in SiC were calculated from Arrhenius plots of electrical conductivity versus inverse temperature.

36 MATERIALS SCIENCE↗

Size-dependent fluorescence of bioaerosols: Mathematical model using fluorescing and absorbing molecules in bacteria

This paper uses a mathematical model of fluorescent biological particles composed of bacteria and/or proteins (mostly as in Hill et al., 2013 [23]) to investigate the size-dependence of the total fluorescence emitted in all directions. The model applies to particles which have negligible reabsorption of fluorescence within the particle. The specific particles modeled here are composed of ovalbumin and of a generic Bacillus. The particles need not be spherical, and in some cases need not be homogeneous. However, the results calculated in this paper are for spherical homogeneous particles. Light absorbing and fluorescing molecules included in the model are amino acids, nucleic acids, and several coenzymes. Here the excitation wavelength is 266 nm. The emission range, 300 to 370 nm, encompasses the fluorescence of tryptophan. The fluorescence cross section (C F ) is calculated and compared with one set of published measured values. We investigate power law (Ad y ) approximations to C F , where d is diameter, and A and y are parameters adjusted to fit the data, and examine how y varies with d and composition, including the fraction as water. The particle's fluorescence efficiency (Q F =C F /geometric-cross-section) can be written for homogeneous particles as Q abs R F , where Q abs is the absorption efficiency, and R F , the fraction of the absorbed light emitted as fluorescence, is independent of size and shape. When Q F is plotted vs. m i d or mi(m r -1)d, where m=m r +im i is the complex refractive index, the plots for different fractions of water in the particle tend to overlap.

54 ENVIRONMENTAL SCIENCES↗

Synthesis, structure and physical properties of reduced barium titanate Ba{sub 2}Ti{sub 13}O{sub 22}

Polycrystalline sample of the reduced barium titanate Ba{sub 2}Ti{sub 13}O{sub 22} was synthesized by solid state reaction at 1523 K in Ar atmosphere for the first time. The Rietveld refinement using the powder X-ray diffraction data confirmed the sample to be main phase of Ba{sub 2}Ti{sub 13}O{sub 22} having the orthorhombic crystal system, space group Bmab and the lattice parameters of a=11.67058(11) A, b=14.12020(13) A and c=10.06121(9) A, and V=1657.995(20) A{sup 3}. The valence state of Ti was evaluated by both the Ti-O bond distance analysis and the Ti K-edge XANES analysis. The magnetic susceptibility was nearly temperature independent in the range of 60-300 K, suggesting the Van Vleck Paramagnetism. The electrical conductivity at 300 K is approximately 320.50 S/cm, and a semiconducting behavior was observed below room temperature. The Seebeck coefficient showed a negative value of -1.25 {mu}V/K at 300 K, indicating n-type behavior. These facts were confirmed by the results of the present theoretical calculations by the FLAPW method. - Graphical abstract: Temperature dependence of the electrical conductivity of Ba{sub 2}Ti{sub 13}O{sub 22}. A plot of ln {sigma} versus T{sup -1} is shown by open circles, and a plot of ln {sigma} versus T{sup -1/4} is shown by open triangles. Highlights: > Polycrystalline samples of Ba{sub 2}Ti{sub 13}O{sub 22} synthesis by solid state reaction. > Theoretical calculation by FLAPW method. > Electrical property measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel alkaline earth copper germanates with ferro and antiferromagnetic S=1/2 chains

Two new alkaline earth copper(II) germanates were hydrothermally synthesized: CaCuGeO{sub 4}{center_dot}H{sub 2}O (1) and BaCu{sub 2}Ge{sub 3}O{sub 9}{center_dot}H{sub 2}O (2), and their structures determined by single crystal X-ray diffraction. Compound (1) crystallizes in space group P2{sub 1}/c with a=5.1320(2) Angstrom-Sign , b=16.1637(5) Angstrom-Sign , c=5.4818(2) Angstrom-Sign , {beta}=102.609(2) Degree-Sign , V=443.76(3) Angstrom-Sign {sup 3} and Z=4. This copper germanate contains layers of composition [CuGeO{sub 4}]{sub {infinity}}{sup 2-} comprising CuO{sub 4} square planes and GeO{sub 4} tetrahedra with calcium and water molecules in the inter-layer space. Compound (2) crystallizes in the Cmcm space group with a=5.5593(3) Angstrom-Sign , b=10.8606(9) Angstrom-Sign , c=13.5409(8) Angstrom-Sign , V=817.56(9) Angstrom-Sign {sup 3} and Z=4. This structure contains GeO{sub 6} and CuO{sub 6} octahedra as well as GeO{sub 4} tetrahedra, forming a three-dimensional network of interconnecting six-membered ring channels. The magnetic susceptibility for both samples can be interpreted as S=1/2 chains, in agreement with the copper topology observed in the crystal structure. The susceptibility of (1) exhibits a Bonner-Fisher type behavior, resulting from antiferromagnetic intra-chain interactions without three-dimensional ordering down to 5 K-the lowest measured temperature. This observation, together with the absence of super-exchange paths between the copper chains, make this system particularly promising for the study of low dimensional magnetism. The magnetic properties of (2) show a very weak ferromagnetic near-neighbor interaction along the chain. In this compound a peak the {chi}T plot seems to indicate the onset of interchain antiferromagentic correlations. However, no ordering temperature is detected in the susceptibility data. - Graphical abstract: Copper chains present in CaCuGeO{sub 4}{center_dot}H{sub 2}O and BaCu{sub 2}Ge{sub 3}O{sub 9}{center_dot}H{sub 2}O, two novel copper germanates synthesized hydrothermally, showing antiferromagnetic and ferromagnetic intra-chain interactions respectively. Highlights: Black-Right-Pointing-Pointer The structure of two new chain containing copper germinates is reported. Black-Right-Pointing-Pointer The calcium compound CaCuGeO{sub 4}{center_dot}H{sub 2}O contains corner sharing square planes. Black-Right-Pointing-Pointer The barium compound BaCu{sub 2}Ge{sub 3}O{sub 9}, displays edge sharing octahedra. Black-Right-Pointing-Pointer Susceptibility data show that the Ca compound is a one-dimensional antiferromagnet while Ba is a weak ferromagnet.

36 MATERIALS SCIENCE↗

Unconventional critical magnetic behavior in the Griffiths ferromagnet La₀.₄Ca₀.₆MnO₂.₈□₀.₂ oxide

The effects of oxygen vacancy on the critical magnetic behavior in La₀.₄Ca₀.₆MnO₂.₈□₀.₂ around the paramagnetic-ferromagnetic (PM-FM) phase transition were investigated through various techniques such as modified Arrott plot, Kouvel-Fisher method and critical isotherm analysis via dc magnetization measurements recorded around the Curie temperature T C . The obtained critical exponents values are β~0.8, γ~0.7 and δ~1.882 with T C ~164.5 K. Thus the scaling law γ+β=δβ is fulfilled. The critical exponents obey the single scaling-equation of state M(H,ε)|ε|{sup -β}=f{sub ±}(H|ε|{sup -(β+γ)}) where, f₊ for T>T C and f⁻ for T>T C . The found exponents are inconsistent with any known universality class. These results attributed to the existence of Griffiths Phase (Triki et al. (2012) [1]) seem to actually reflect the unconventional critical scaling of the magnetic susceptibility. - Graphical abstract: Modified Arrott plots: M{sup 1/β} vs. (μ₀H){sup 1/γ} with (a) mean-field model (β=0.5, γ=1), (b) 3D-Heisenberg model (β=0.365, γ=1.336), (c) 3D-Ising model (β=0.325, γ=1.24), (d) tricritical mean-field model (β=0.25, γ=1) and (e) (β=0.79, γ=0.71). Highlights: • Study of the critical behavior for La₀.₄Ca₀.₆MnO₂.₈□₀.₂ compound. • A typical second-order magnetic transition near T C . • Unconventional critical exponents were found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation kinetics of aluminum diboride

The oxidation characteristics of aluminum diboride (AlB{sub 2}) and a physical mixture of its constituent elements (Al+2B) were studied in dry air and pure oxygen using thermal gravimetric analysis to obtain non-mechanistic kinetic parameters. Heating in air at a constant linear heating rate of 10 °C/min showed a marked difference between Al+2B and AlB{sub 2} in the onset of oxidation and final conversion fraction, with AlB{sub 2} beginning to oxidize at higher temperatures but reaching nearly complete conversion by 1500 °C. Kinetic parameters were obtained in both air and oxygen using a model-free isothermal method at temperatures between 500 and 1000 °C. Activation energies were found to decrease, in general, with increasing conversion for AlB{sub 2} and Al+2B in both air and oxygen. AlB{sub 2} exhibited O{sub 2}-pressure-independent oxidation behavior at low conversions, while the activation energies of Al+2B were higher in O{sub 2} than in air. Differences in the composition and morphology between oxidized Al+2B and AlB{sub 2} suggested that Al{sub 2}O{sub 3}–B{sub 2}O{sub 3} interactions slowed Al+2B oxidation by converting Al{sub 2}O{sub 3} on aluminum particles into a Al{sub 4}B{sub 2}O{sub 9} shell, while the same Al{sub 4}B{sub 2}O{sub 9} developed a needle-like morphology in AlB{sub 2} that reduced oxygen diffusion distances and increased conversion. The model-free kinetic analysis was critical for interpreting the complex, multistep oxidation behavior for which a single mechanism could not be assigned. At low temperatures, moisture increased the oxidation rate of Al+2B and AlB{sub 2}, but both appear to be resistant to oxidation in cool, dry environments. - Graphical abstract: Isothermal kinetic data for AlB{sub 2} in air, showing a constantly decreasing activation energy with increasing conversion. Model-free analysis allowed for the calculation of global kinetic parameters despite many simultaneous mechanisms occurring concurrently. (a) Time–temperature plots, (b) conversion as a function of time, (c) Arrhenius plots used to calculate activation energies, and (d) activation energy as a function of conversion. Display Omitted - Highlights: • First reported kinetic parameters for AlB{sub 2} and Al+2B oxidation in air and O{sub 2}. • Possible mechanism of enhanced boron combustion presented. • Moisture sensitivity shown to be problematic for AlB{sub 2}, less for Al+2B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic solid state energy scale: Universality and periodic trends in oxidation state

The atomic solid state energy (SSE) scale originates from a plot of the electron affinity (EA) and ionization potential (IP) versus band gap (E{sub G}). SSE is estimated for a given atom by assessing an average EA (for a cation) or an average IP (for an anion) for binary inorganic compounds having that specific atom as a constituent. Physically, SSE is an experimentally-derived average frontier orbital energy referenced to the vacuum level. In its original formulation, 69 binary closed-shell inorganic semiconductors and insulators were employed as a database, providing SSE estimates for 40 elements. In this contribution, EA and IP versus E{sub G} are plotted for an additional 92 compounds, thus yielding SSE estimates for a total of 64 elements from the s-, p-, d-, and f-blocks of the periodic table. Additionally, SSE is refined to account for its dependence on oxidation state. Although most cations within the SSE database are found to occur in a single oxidation state, data are available for nine d-block transition metals and one p-block main group metal in more than one oxidation state. SSE is deeper in energy for a higher cation oxidation state. Two p-block main group non-metals within the SSE database are found to exist in both positive and negative oxidation states so that they can function as a cation or anion. SSEs for most cations are positioned above −4.5 eV with respect to the vacuum level, and SSEs for all anions are positioned below. Hence, the energy −4.5 eV, equal to the hydrogen donor/acceptor ionization energy ε(+/−) or equivalently the standard hydrogen electrode energy, is considered to be an absolute energy reference for chemical bonding in the solid state. - Highlights: • Atomic solid-state energies are estimated for 64 elements from experimental data. • The relationship between atomic SSEs and oxidation state is assessed. • Cations are positioned above and absolute energy of −4.5 eV and anions below.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, thermal and electrical properties of Al-doped Bi{sub 4}V{sub 1.8}Cu{sub 0.2}O{sub 10.7}

Partial substitution of copper with aluminum in Bi{sub 4}V{sub 1.8}Cu{sub 0.2}O{sub 10.7} has led to the Bi{sub 4}V{sub 1.8}Cu{sub 0.2−x}Al{sub x}O{sub 10.7+x/2} solid solution. X-ray diffraction and thermal analysis have shown that the compounds with x=0.05 and x=0.10 are tetragonal with γ′ form of Bi{sub 4}V{sub 2}O{sub 11}, while the compound with x=0.15 is of β polymorph. The effect of Al{sup 3+} doping on electrical conductivity has been studied using Electrochemical Impedance Spectroscopy. The electrical conductivity of doped samples along with the amount of Al{sup 3+} has been studied by electrochemical impedance spectroscopy in the temperature range 250–700 °C. The slope changes observed in the Arrhenius plots agree with the microstructural transitions occurring in these compounds. The highest ionic conductivity values are obtained for the sample with x=0.05. - Graphical abstract: Arrhenius plots of the electrical conductivity of the of Bi{sub 4}V{sub 1.8}Cu{sub 0.2−x}Al{sub x}O{sub 10.7+x/2} compounds. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Sm2O3 addition on Judd-Ofelt parameters, thermal and optical properties of the TeO2-Li2O-ZnO-Nb2O5 glass system

Highlights: • Synthesis of Sm{sub 2}O{sub 3} doped TeO{sub 2}-Li{sub 2}O-ZnO-Nb{sub 2}O{sub 5} glass to be used in optical devices. • Area under the peak calculations of FTIR and Raman display higher presence of BOs. • DSC plots indicate high stability and high rigidity of prepared glass samples. • Judd-Ofelt analysis shows the ionic nature of Sm{sup 3+} ions with neighboring atoms. • Higher branching ratio values obtained from {sup 6}H{sub 5/2} → {sup 6}F{sub 5/2} emission transition. - Abstract: A series of transparent and light yellow color samples composed of Sm{sub 2}O{sub 3} doped tellurium oxide glasses with chemical composition 75TeO{sub 2}-5Li{sub 2}O-10ZnO-(10-X) Nb{sub 2}O{sub 5}-XSm{sub 2}O{sub 3} was prepared by conventional melt-quenching technique. Rare earth (Sm{sub 2}O{sub 3}) was added to improve all glass properties. From obtained radiative properties, the samples which prepared with above composition can be considered as a prospect application for laser design due to higher branching ratio. The physical properties including sample density, molar volume, and OPD were measured. The glassy nature is approved by XRD analysis. The structural modification of glass forming units with introducing Sm{sub 2}O{sub 3} was studied by FTIR and Raman spectra. The intensity ratio of TeO{sub 4}/TeO{sub 3} was measured to determine the ratio of bridging/non-bridging oxygen exists in glass network. Glass thermal stability, glass transition temperature, and melting temperature were obtained from DSC plots. The UV–vis-NIR absorption spectra display 9 peaks. Optical parameters including optical band gap E{sub Opt}, Urbach energy ΔE and refractive index n were determined. From absorption spectra, Judd-Ofelt intensity parameters (Ω{sub λ} and λ = 2, 4, 6) have been derived to study bonding nature. A spectroscopic quality factor was calculated. Branching ratio (β{sub r}) and lifetime (τ) have been calculated using JO parameters. Absorption and emission cross-sections were determined to measure the probability of an absorption or emission process. Finally, we propose that these prepared samples can be used in optical devices and other applications.

36 MATERIALS SCIENCE↗

Corrosion behaviors of friction welded dissimilar aluminum alloys

Highlights: • Corrosion properties of friction welded dissimilar aluminum alloys seem to be governed by the anode part in the weld. • Intense corrosion near the interface has the limited region due to insufficient ionic transport. • Self-formation of a micro-galvanic cell is a main reason for the inferior corrosion performance. - Abstract: Corrosion behaviors of the friction welded dissimilar aluminum alloys were investigated to understand how galvanic effect plays a role in altering corrosion properties of the dissimilar weld. From the fact that the weld had the similar OCP value to that of AA2017, it can be inferred that the corrosion characteristics of the weld is under the control of the AA2017 part in the weld and as a result, only the AA2017 part in the weld had experienced severe corrosion, leaving AA6063 under cathodic protection. Intense corrosion occurring near the interface implies that the area near the interface is placed under the effect of galvanic corrosion and there was the effective distance where the galvanic effect exerts an impact due to the increase in the resistance of the electrolyte with the distance from the interface. The disappearance of Warburg diffusion plot in Nyquist plots for the weld seemed to be the breakdown of the passivation layer related to the formation of the micro-galvanic cell, which in turn presented the shrinkage in the capacitance response, indicating that charge reactions in the form of corrosion occurred.

36 MATERIALS SCIENCE↗

A complex approach to assessing porous structure of structured ceramics obtained by SPS technique

Highlights: • A complex approach to microstructural analysis of nanostructured SPS ceramics was presented. • A bunch of gas, intrusion and microscopic methods were applied for open/closed porosity determination in nanoceramics. • Kinetic TPR analysis for structural changes in nanoceramic was carried out. • 3D pore visualization for nanoceramics was provided via SEM/FIB tomography • Porosity calculations were performed via BET, BJH, t-plot, Washburn equation, FEI Avizo 9.1 software results. - Abstract: Spark plasma sintering (SPS) is a highly prospective technology providing rapid consolidation of nano-disperse compositions into structured ceramics with complex structural organization. Characterizing pore structure of such systems remains a challenge due to different types, size and shape of the pores as well as structural defects occurring in the material, thus requiring special methods to quantify certain porosity type. The paper presents a complex approach to studying structure of SPS hematite-based structured ceramics. The method involves a number of gas, intrusion and electron microscopy probing techniques to characterize open and closed pores in the ceramics bulk. Low temperature nitrogen sorption has been implemented to estimate open micro- and mesoporosity in the size range 0.7–50 nm using BET, BJH and t-plot methods to process experimental data. Additionally, structural peculiarities of consolidated structured ceramics have been studied using temperature-programmed reduction (TPR) with the kinetic analysis of the results being carried out. Volume of macropores sized above 50 nm has been measured with mercury intrusion. Closed pores and structural defects have been quantified with SEM and FIB/SEM tomography. By comparing experimental and estimated results we have shown that addressing all porosity types provides a highly precise structural characterization of the material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, structure and dielectric properties of a rare earth double perovskite oxide Ba{sub 2}CeTaO{sub 6}

Highlights: {yields} A single phase Ba{sub 2}CeTaO{sub 6} (BCT) having monoclinic structure is synthesized. {yields} Impedance spectroscopy is applied to investigate the ac electrical properties of BCT. {yields} Complex impedance plane plots show grain contribution for BCT. {yields} The frequency dependent conductivity spectra follow the power law. -- Abstract: A rare earth double perovskite oxide barium cerium tantalate, Ba{sub 2}CeTaO{sub 6} (BCT) is synthesized by solid-state reaction. The X-ray diffraction pattern of the sample at room temperature (25 {sup o}C) shows monoclinic structure, with the lattice parameters, a = 9.78 A, b = 9.02 A and c = 4.27 A and {beta} = 93.8{sup o}. A scanning electron micrograph shows the formation of grains with average size {approx} 2 {mu}m. Impedance spectroscopy is applied to investigate the ac electrical properties of BCT in a temperature range from 303 to 673 K and in a frequency range from 100 Hz to 1 MHz. Complex-impedance-plane plots show grain contribution for BCT. The frequency-dependent electrical data are analyzed in the framework of the conductivity and modulus formalisms. The frequency-dependent conductivity spectra follow a power law. The conductivity at 110 Hz varies from 3.5 x 10{sup -7} S m{sup -1} to 1.2 x 10{sup -2} S m{sup -1} with increasing temperature from 303 to 673 K, respectively. The scaling behaviour of M'' and Z'' suggest that the relaxation describes the same mechanism at various temperatures.

36 MATERIALS SCIENCE↗

A quaternary lead based perovskite structured materials with diffuse phase transition behavior

Graphical abstract: (a) Curie-Weiss plot for the inverse of the relative dielectric permittivity and (b) log (1/{epsilon} - 1/{epsilon}{sub m}) as function of log (T - T{sub m}) for ceramics at 1 kHz. Highlights: Black-Right-Pointing-Pointer Retaining phase pure structure with quaternary complex stoichiometric compositions. Black-Right-Pointing-Pointer P-E loops with good saturation polarization (P{sub s} {approx} 30.7 {mu}C/cm{sup 2}). Black-Right-Pointing-Pointer Diffused relaxor phase transition behavior with {gamma} estimated is {approx}1.65. -- Abstract: A lead based quaternary compound composed of 0.25(PbZr{sub 0.52}Ti{sub 0.48}O{sub 3}) + 0.25(PbFe{sub 0.5}Ta{sub 0.5}O{sub 3}) + 0.25 (PbF{sub 0.67}W{sub 0.33}O{sub 3}) + 0.25(PbFe{sub 0.5}Nb{sub 0.5}O{sub 3}) - (PZT-PFT-PFW-PFN) was synthesized by conventional solid-state reaction techniques. It showed moderate high dielectric constant, low dielectric loss, and two diffuse phase transitions, one below the room temperature {approx}261 K and other above {approx}410 K. X-ray diffraction (XRD) patterns revealed a tetragonal crystal structure at room temperature where as scanning electron micrograph (SEM) indicates inhomogeneous surface with an average grain size of 500 nm-3 {mu}m. Well saturated ferroelectric hysteresis loops with good saturation polarization (spontaneous polarization, P{sub s} {approx} 30.68 {mu}C/cm{sup 2}) were observed. Temperature-dependent ac conductivity displayed low conductivity with kink in spectra near the phase transition. In continuing search for developing new ferroelectric materials, in the present study we report stoichiometric compositions of complex perovskite ceramic materials: (PZT-PFT-PFW-PFN) with diffuse phase transition behavior. The crystal structure, dielectric properties, and ferroelectric properties were characterized by XRD, SEM, dielectric spectroscopy, and polarization. 1/{epsilon} versus (T) plots revealed diffuse relaxor phase transition (DPT) behavior. The compositional variation on the phase transition temperature, dielectric constant, and ferroelectric to paraelectric phase transitions are discussed.

36 MATERIALS SCIENCE↗

Synthesis, structural, magnetic and electrical properties of Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (x = 0.0, 0.2) nanoparticles

Graphical abstract: The variations of imaginary part of dielectric permittivity (ε″) of TEG@Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} nanocomposite as a function of temperature and frequency for (A) x = 0.0 and (B) x = 0.2. Display Omitted Highlights: ► Nearly monodisperse Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} nanocomposite were prepared via hydrothermal method. ► The ac conductivity showed a temperature dependent behavior at low frequencies. ► dc conductivity of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} nanoparticle are found to obey the Arrhenius plot. ► Also these materials may be used in electronic devices and microwave devices. -- Abstract: Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} spinel nanoparticles with Zn concentrations of x = 0.0, 0.2 were prepared by a hydrothermal route in the presence of triethylene glycol (TEG). The structural, magnetic, electrical and dielectric properties of the prepared nanoparticles were studied. The XRD results confirmed the formation of single spinel ferrite structure with crystallite size 9 and 10 nm for x = 0.0 and 0.2 compositions respectively. The lattice parameter (a) increased with increasing Zn concentration. Temperature and frequency dependent electrical and dielectric properties of the prepared ferrites have also been investigated. Our findings show that overall conductivity of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} nanoparticle is lower than that of CoFe{sub 2}O{sub 4} and roughly in the range of 10{sup −11}–10{sup −7} S cm{sup −1} depending strongly temperature and frequency owing to the formation of stable electric bonds between the Zn{sup 2+} and Fe{sup 2+} ions, which localizes Fe{sup 2+} charge carriers. The ac conductivity showed a temperature dependent behavior at low frequencies and temperature independent behavior at high frequencies, which is an indication of ionic conductivity. dc conductivity of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} nanoparticle are found to obey the Arrhenius plot and can be classified into two regions over with activation energy of 0.113 and 0.163 eV in the ranges of 20–40 °C and 70–120 °C, respectively when CoFe{sub 2}O{sub 4} has an activation energy of 0.245 eV.

36 MATERIALS SCIENCE↗

SrFe{sub 0.9}Ti{sub 0.1}O{sub 3−δ}: A cluster spin glass

Graphical abstract: - Highlights: • Prepared SrFe{sub 0.9}Ti{sub 0.1}O{sub 3−δ} is in nanocrystalline form. • Arrott plot shows absence of spontaneous magnetization which rules out the possibility of long range ferromagnetic order. • AC susceptibility data is evidence of cluster spin glass. • There is no magnetic Bragg's reflection. • By substituting Ti{sup 4+}, helical antiferromagetic SrFeO{sub 3} is transformed to a cluster spin glass. - Abstract: The magnetic ground state of nanocrystalline SrFe{sub 0.9}Ti{sub 0.1}O{sub 3−δ} system has been investigated from 2 K to 300 K using AC Susceptibilty (ACS), magnetization and neutron diffraction measurements. The cusp in the temperature dependent magnetization and dispersion below T{sub max} (the temperature at which the maximum susceptibility is observed) in real part of ac susceptibility with frequency is observed. Arrott plot shows the lack of M{sub S} (spontaneous magnetization) down to 2 K, and the non-occurrence of magnetic Bragg reflections below the T{sub max} in neutron diffraction measurements, indicates the absence of long range ferro and antiferromagnetic order. The frequency dependence of T{sub max} obeys Vögel–Fulcher model establishing the cluster spin glass behavior in this system.

36 MATERIALS SCIENCE↗

Morphology and magneto-transport properties of electron doped La{sub 0.85}Te{sub 0.15}MnO{sub 3} thin film deposited on LaAlO{sub 3} substrate

Graphical abstract: Resistivity versus temperature plots of La{sub 0.85}Te{sub 0.15}MnO{sub 3} thin film under the applied magnetic field of 0 T, 5 T and 8 T. - Highlights: • La{sub 0.85}Te{sub 0.15}MnO{sub 3} manganite thin film is deposited on LaAlO{sub 3} using PLD technique. • Film is deposited at 750 °C, and is highly crystalline, single phase and c-axis oriented. • The film consists of grains with an average diameter of 60 nm. • Resistivity plots display double insulator-metal transitions. • XPS results confirm the electron doped (n-type) nature of the film. - Abstract: We report the structural, electronic transport and X-ray photoemission spectroscopic study of 100 nm thin film of La{sub 0.85}Te{sub 0.15}MnO{sub 3} grown on (0 0 1) LaAlO{sub 3} single crystal substrate by pulsed laser deposition. XRD results confirm that the film has good crystalline quality, single phase, and has a c-axis orientation. The atomic force microscopic (AFM) results showed that the film consists of grains with an average diameter of 60 nm. The resistivity measurement showed double insulator-metal transitions in absence and as well as in presence of the magnetic field. The resistivity peaks are ascribed to the intrinsic contribution of LTMO film and the tunnelling of spin-polarized electrons at grain boundaries. X-ray photoemission spectroscopy measurements suggest that Te ions are in the Te{sup 4+} state, while the Mn ions are forced to stay in the Mn{sup 2+} and Mn{sup 3+} valence state.

36 MATERIALS SCIENCE↗