Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photocurrent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Elucidating the sole contribution from electromagnetic near-fields in plasmon-enhanced Cu 2 O photocathodes

Despite many promising reports of plasmon-enhanced photocatalysis, the inability to identify the individual contributions from multiple enhancement mechanisms has delayed the development of general design rules for engineering efficient plasmonic photocatalysts. Herein, we construct a plasmonic photocathode comprised of Au@SiO 2 (core@shell) nanoparticles embedded within a Cu 2 O nanowire network to exclusively examine the contribution from one such mechanism: electromagnetic near-field enhancement. The influence of the local electromagnetic field intensity is correlated with the overall light-harvesting efficiency of the device through variation of the SiO 2 shell thickness (5—22 nm) to systematically tailor the distance between the plasmonic Au nanoparticles and the Cu 2 O nanowires. A three-fold increase in device photocurrent is achieved upon integrating the Au@SiO 2 nanoparticles into the Cu 2 O nanowire network, further enabling a ~40% reduction in semiconductor film thickness while maintaining photocathode performance. Photoelectrochemical results are further correlated with photoluminescence studies and optical simulations to confirm that the near-field enhancement is the sole mechanism responsible for increased light absorption in the plasmonic photocathode.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Understanding the Impact of Oligomeric Polystyrene Side Chain Arrangement on the All‐Polymer Solar Cell Performance

Abstract The introduction of oligomeric polystyrene (PS) side chains into the conjugated backbone is proven to enhance the processability and electronic properties of semiconducting polymers. Here, two series of donor and acceptor polymers are prepared with different molar percentages of PS side chains to elucidate the effect of their substitution arrangement on the all‐polymer solar cell performance. The observed device performance is lower when the PS side chains are substituted on the donor polymer and higher when on the acceptor polymer, indicating a clear arrangement effect of the PS side chain. The incorporation of PS side chains to the acceptor polymer contributes to the decrease in phase separation domain size in the blend films. However, the reduced domain size was still an order of magnitude larger than the typical exciton diffusion length. A detailed morphological study together with the estimation of solubility parameter of the pristine PS, donor, and acceptor polymers reveals that the relative value of solubility parameter of each component dominantly contributes to the purity of the phase separated domain, which strongly impacts the amount of generated photocurrent and overall solar cell performance. This study provides an understanding of the design strategies to improve the all‐polymer solar cells.

Kurosawa, Tadanori↗

Enhancing Mo:BiVO 4 Solar Water Splitting with Patterned Au Nanospheres by Plasmon-Induced Energy Transfer [Rational Nanopositioning for BiVO 4 Solar Water Splitting by Plasmon-induced Energy Transfer]

Here, plasmonic metal nanostructures have been extensively investigated to improve the performance of metal oxide photoanodes for photoelectrochemical (PEC) solar water splitting cells. Most of these studies have focused on the effects of those metal nanostructures on enhancing light absorption and enabling direct energy transfer via hot electrons. However, several recent studies have shown that plasmonic metal nanostructures can improve the PEC performance of metal oxide photoanodes via another mechanism known as plasmon–induced resonant energy transfer (PIRET). However, this PIRET effect has not yet been tested for the molybdenum–doped bismuth vanadium oxide (Mo:BiVO 4 ), regarded as one of the best metal oxide photoanode candidates. Here, this study constructs a hybrid Au nanosphere/Mo:BiVO 4 photoanode interwoven in a hexagonal pattern to investigate the PIRET effect on the PEC performance of Mo:BiVO 4 . This study finds that the Au nanosphere array not only increases light absorption of the photoanode as expected, but also improves both its charge transport and charge transfer efficiencies via PIRET, as confirmed by time–correlated single photon counting and transient absorption studies. As a result, incorporating the Au nanosphere array increases the photocurrent density of Mo:BiVO 4 at 1.23 V versus RHE by ≈2.2–fold (2.83 mA cm –2 ).

36 MATERIALS SCIENCE↗

Surface-Plasmon-Assisted Photoelectrochemical Reduction of CO 2 and NO 3 – on Nanostructured Silver Electrodes

Electrochemical reduction of carbon dioxide (CO 2 ) typically suffers from low selectivity and poor reaction rates that necessitate high overpotentials, which impede its possible application for CO 2 capture, sequestration, or carbon-based fuel production. New strategies to address these issues include the utilization of photoexcited charge carriers to overcome activation barriers for reactions that produce desirable products. Here, this study demonstrates surface-plasmon-enhanced photoelectrochemical reduction of CO 2 and nitrate (NO 3 - ) on silver nanostructured electrodes. The observed photocurrent likely originates from a resonant charge transfer between the photogenerated plasmonic hot electrons and the lowest unoccupied molecular orbital (MO) acceptor energy levels of adsorbed CO 2 , NO 3 - , or their reductive intermediates. The observed differences in the resonant effects at the Ag electrode with respect to electrode potential and photon energy for CO 2 versus NO 3 - reduction suggest that plasmonic hot-carriers interact selectively with specific MO acceptor energy levels of adsorbed surface species such as CO 2 , NO 3 - , or their reductive intermediates. This unique plasmon-assisted charge generation and transfer mechanism can be used to increase yield, efficiency, and selectivity of various photoelectrochemical processes.

36 MATERIALS SCIENCE↗

Resolving Hysteresis in Perovskite Solar Cells with Rapid Flame-Processed Cobalt-Doped TiO 2

To further increase the open–circuit voltage ( V oc ) of perovskite solar cells (PSCs), many efforts have been devoted to doping the TiO 2 electron transport/selective layers by using metal dopants with higher electronegativity than Ti. However, those dopants can introduce undesired charge traps that hinder charge transport through TiO 2 , so the improvement in the V oc is often accompanied by an undesired photocurrent density–voltage ( J–V ) hysteresis problem. Herein, it is demonstrated that the use of a rapid flame doping process (40 s) to introduce cobalt dopant into TiO 2 not only solves the J–V hysteresis problem but also increases the V oc and power conversion efficiency of both mesoscopic and planar PSCs. The reasons for the simultaneous improvements are two fold. First, the flame–doped Co–TiO 2 film forms Co–O v (cobalt dopant–oxygen vacancy) pairs and hence reduces the number density of Ti 3+ trap states. Second, Co doping upshifts the band structure of TiO 2 , facilitating efficient charge extraction. As a result, for planar PSCs, the flame doping of Co increases the efficiency from 17.1% to 18.0% while reducing the hysteresis from 16.0% to 1.7%. Here, for mesoscopic PSCs, the flame doping of Co increases the efficiency from 18.5% to 20.0% while reducing the hysteresis from 7.0% to 0.1%.

36 MATERIALS SCIENCE↗

Emergent Degradation Phenomena Demonstrated on Resilient, Flexible, and Scalable Integrated Photoelectrochemical Cells

Photoelectrochemical (PEC) water splitting provides a pathway to generate sustainable clean fuels using the two most abundant resources on Earth: sunlight and water. Currently, most of the successful models of PEC cells are still fabricated on small scales near 1 cm 2 , which largely limits the mass deployment of solar-fuel production. Here, the scale-up to 8 cm 2 of an integrated PEC (IPEC) device is demonstrated and its performance compared to a 1 cm 2 IPEC cell, using state-of-the-art iridium and platinum catalysts with III–V photoabsorbers. The initial photocurrents at 1 sun are 8 and 7 mA cm -2 with degradation rates of 0.60 and 0.47 mA cm -2 day -1 , during unbiased operation for the 1 and 8 cm 2 devices, respectively. Additionally, evaluating under outdoor and indoor conditions at two U.S. National Laboratories reveals similar results, evidencing the reproducibility of this design's performance. Furthermore, the emerging degradation mechanisms during scale-up are investigated and the knowledge gained from this work will provide feedback to the broader community, since PEC device durability is a limiting factor in its potential future deployment.

25 ENERGY STORAGE↗

Water Splitting: Emergent Degradation Phenomena Demonstrated on Resilient, Flexible, and Scalable Integrated Photoelectrochemical Cells (Adv. Energy Mater. 48/2020)

We report Photoelectrochemical (PEC) water splitting provides a pathway to generate sustainable clean fuels using the two most abundant resources on Earth: sunlight and water. Currently, most of the successful models of PEC cells are still fabricated on small scales near 1 cm 2 , which largely limits the mass deployment of solar-fuel production. Here, the scale-up to 8 cm 2 of an integrated PEC (IPEC) device is demonstrated and its performance compared to a 1 cm 2 IPEC cell, using state-of-the-art iridium and platinum catalysts with III-V photoabsorbers. The initial photocurrents at 1 sun were 8 and 7 mA cm -2 with degradation rates of 0.60 and 0.47 mA cm -2 day -1 , during unbiased operation for the 1 and 8 cm 2 devices, respectively. Evaluating under outdoor and indoor conditions at two US National Laboratories revealed similar results, evidencing the reproducibility of this design’s performance. Furthermore, the emerging degradation mechanisms during scale-up are investigated and the knowledge gained from this work will provide feedback to the broader community, since PEC device durability is a limiting factor in its potential future deployment.

25 ENERGY STORAGE↗

Linking Phase Behavior to Performance Parameters in Non-Fullerene Acceptor Solar Cells

Performance of nonfullerene-based organic solar cells is largely dependent on the donor:acceptor blend morphology, which is initially tuned by composition. However, morphological design rules are difficult to identify due to the complex relationship between composition-dependent phase behavior and performance properties. In this study, the authors are able to establish a direct link between PM6:Y6 film morphology and device properties by combining grazing-incidence wide-angle X-ray scattering with highly sensitive Fourier transform photocurrent spectroscopy. By analyzing properties across the full composition range, interfacial microstructure and the corresponding charge transfer (CT) states are identified and direct structure–property relationships are established. Here the results indicate that open-circuit voltage is controlled by the CT state at amorphous-PM6:crystalline-Y6 interfaces. Crystalline Y6 is found to increase both transport and non-radiative recombination, suggesting that morphological tradeoffs may be necessary for overall device optimization.

14 SOLAR ENERGY↗

Effective Corrosion-Resistant Single-Atom Alloy Catalyst on HfO 2 -Passivated BiVO 4 Photoanode for Durable (≈800 h) Solar Water Oxidation

Green hydrogen (H 2 ) production from solar water splitting necessitates photoelectrodes with superior photoelectrochemical (PEC) activity and durability. However, surface defects and photocorrosion instability—especially at high potentials—limit PEC performance and stability. Herein, the prototypical bismuth vanadate (BiVO 4 ) photoanode is used to demonstrate a holistic approach to improve photocurrent density and long-term stability. In this approach, high surface-area nanostructuring of BiVO 4 is combined with barium (Ba) doping with semi-crystalline hafnium oxide (HfO 2 ) surface passivation and single-atom nickel platinum (NiPt) catalysts. The introduction of Ba 2+ ions into BiVO 4 increases the concentration of conductive V 4+ ions or the ratio of V 4+ ions to oxygen vacancies, avoiding V 5+ dissolution during water oxidation. The semi-crystalline HfO 2 , which serves as a passivation layer, prevents BiVO 4 photocorrosion by suppressing harmful chemical reactions when holes are transferred to the electrolyte. The synergistic use of isolated single-atom and Ni-Pt coordination improves charge transfer at the photoanode/electrolyte interface, leading to enhanced PEC kinetics and stability. As a result, a photoelectrode is demonstrated with ≈6.5 mA cm -2 at 1.23 V versus a reversible hydrogen electrode (RHE) and continuous operation for 800 h with a negligible degradation rate. This work provides a promising approach to improve photoanodes for PEC H 2 production.

08 HYDROGEN↗

Light‐Driven Water Splitting Mediated by Photogenerated Bromine

Abstract Light‐driven water splitting was achieved using a dye‐sensitized mesoporous oxide film and the oxidation of bromide (Br − ) to bromine (Br 2 ) or tribromide (Br 3 − ). The chemical oxidant (Br 2 or Br 3 − ) is formed during illumination at the photoanode and used as a sacrificial oxidant to drive a water oxidation catalyst (WOC), here demonstrated using [Ru(bda)(pic) 2 ], ( 1 ; pic=picoline, bda=2,2′‐bipyridine‐6,6′‐dicarboxylate). The photochemical oxidation of bromide produces a chemical oxidant with a potential of 1.09 V vs. NHE for the Br 2 /Br − couple or 1.05 V vs. NHE for the Br 3 − /Br − couple, which is sufficient to drive water oxidation at 1 (Ru V/IV ≈1.0 V vs. NHE at pH 5.6). At pH 5.6, using a 0.2 m acetate buffer containing 40 m m LiBr and the [Ru(4,4′‐PO 3 H 2 ‐bpy)(bpy) 2 ] 2+ ( RuP 2+ , bpy=2,2′‐bipyridine) chromophore dye on a SnO 2 /TiO 2 core–shell electrode resulted in a photocurrent density of around 1.2 mA cm −2 under approximately 1 Sun illumination and a Faradaic efficiency upon addition of 1 of 77 % for oxygen evolution.

Sheridan, Matthew V.↗

Vacancy-Rich Monolayer BiO 2- x as a Highly Efficient UV, Visible, and Near-Infrared Responsive Photocatalyst

Here in this paper, a full-spectrum responsive vacancy-rich monolayer BiO 2-x has been synthesized. The increased density of states at the conduction band (CB) minimum in the monolayer BiO 2-x is responsible for the enhanced photon response and photo-absorption, which were confirmed by UV/Vis-NIR diffuse reflectance spectra (DRS) and photocurrent measurements. Compared to bulk BiO 2-x , monolayer BiO 2-x has exhibited enhanced photocatalytic performance for rhodamine B and phenol removal under UV, visible, and near-infrared light (NIR) irradiation, which can be attributed to the vacancy VBi-O"' as confirmed by the positron annihilation spectra. The presence of V Bi-O "' defects in monolayer BiO 2-x promoted the separation of electrons and holes. This finding provides an atomic level understanding for developing highly efficient UV, visible, and NIR light responsive photocatalysts.

36 MATERIALS SCIENCE↗

Light-Driven Water Splitting Mediated by Photogenerated Bromine

Light-driven water splitting was attained using a dye-sensitized mesoporous oxide film and the oxidation of bromide (Br–) to bromine (Br 2 ) or tribromide (Br 3 –). The chemical oxidant (Br 2 or Br 3 –) is formed during illumination at the photoanode and used as a sacrificial oxidant to drive a water oxidation catalyst (WOC), here shown using [Ru(bda)(pic) 2 ], (1; pic=picoline, bda=2,2'-bipyridine-6,6'-dicarboxylate). The photochemical oxidation of bromide produces a chemical oxidant with a possibility of 1.09 V vs. NHE for the Br 2 /Br– couple or 1.05 V vs. NHE for the Br 3 –/Br– couple, which is sufficient to drive water oxidation at 1 (Ru V/IV ≈1.0 V vs. NHE at pH 5.6). At pH 5.6, using a 0.2 M acetate buffer containing 40 mm LiBr and the [Ru(4,4'-PO3H2-bpy)(bpy) 2 ] 2+ (RuP 2+ , bpy=2,2'-bipyridine) chromophore dye on a SnO 2 /TiO 2 core–shell electrode resulted in a photocurrent density of around 1.2 mA cm –2 under approximately 1 Sun illumination and a Faradaic efficiency upon addition of 1 of 77 % for oxygen evolution.

25 ENERGY STORAGE↗

Heterostructured Bismuth Vanadate/Cobalt Phosphate Photoelectrodes Promote TEMPO-Mediated Oxidation of 5-Hydroxymethylfurfural

Motivated by replacing the kinetically unfavorable oxygen evolution reaction (OER) and producing value-added products in photoelectrochemical cells (PECs), we report that bismuth vanadate (BiVO 4 ) photoelectrodes modified with a cobalt phosphate (CoPi) overlayer facilitate 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated selective oxidation of 5-hydroxymethylfurfural (HMF). CoPi layers with sufficient thickness were found to reduce the potential required for TEMPO oxidation by 0.5 V, as well as increase charge injection efficiency sevenfold compared to BiVO 4 without CoPi. Furthermore, the undesired OER was completely suppressed when using the heterostructured photoanodes. Transient photocurrent measurements suggested that CoPi alleviates recombination losses resulting from the back reduction of oxidized TEMPO. The PECs with BiVO 4 /CoPi bilayer achieved 88 % yield to 2,5-furandicarboxylic acid (FDCA) from HMF oxidation under mild conditions, whereas <1 % FDCA was generated with BiVO 4 . In conclusion, these findings suggest that suppression of the back reduction process substantially improves the efficiency of the oxidation, giving a potential route to more efficient solar fuel/chemical production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetic Tug-of-War between Pt and Leaky TiO 2 : Positive and Negative Effects on the Function of Molecularly-Modified p -Si(111)|TiO 2 |Pt Photocathodes

Photoelectrochemical solar energy conversion to chemical products is a promising avenue towards renewable fuels, and TiO 2 deposition on semiconductor photocathodes is a widespread surface protection strategy. However, the electronic, thermodynamic, and kinetic effects of protection layers on interfacial energetics remains poorly understood. Here, electrochemical data (photocurrent onset and flatband potentials) of p-Si(111)|TiO 2 |Pt is collected in contact with an outer-sphere redox couple. We find that onset potentials shift negatively as a function of increasing oxide thickness, but this effect is not reflected in the flatband potentials. This reveals the mechanism of these shifts is kinetic rather than thermodynamic,and suggests that hole leakage through the TiO 2 is responsible. When Pt nanoparticles are deposited onto the TiO 2 , positive shifts in both the onset and flatband potentials are observed, revealing Pt catalysts are beneficial for more than just increased catalytic rates. These results highlight the importance of understanding the effects of surface modifications on the energetics at the interface in both catalytic and simple electron transfer systems.

14 SOLAR ENERGY↗

Molecular Design Principle of All-organic Dyes for Dye-Sensitized Solar Cells

All-organic dyes have shown promising potential as an effective sensitizer in dye-sensitized solar cells (DSSCs). The design concept of all-organic dyes to improve light-to-electric-energy conversion is discussed based on the absorption, electron injection, dye regeneration, and recombination. How the electron-donor–acceptor-type framework can provide better light harvesting through bandgap-tuning and why proper arrangement of acceptor/anchoring groups within a conjugated dye frame is important in suppressing improper charge recombination in DSSCs are discussed. Separating the electron acceptor from the anchoring unit in the donor–acceptor-type organic dye would be a promising strategy to reduce recombination and improve photocurrent generation.

14 SOLAR ENERGY↗

Synthesis of Host‐Guest Hematite Photoelectrodes for Solar Water Splitting

Abstract Hematite (α‐Fe 2 O 3 ) is a promising semiconductor for photoelectrochemical (PEC) water splitting, due to its abundance, low‐cost and excellent stability. However, the efficiency of α‐Fe 2 O 3 photoelectrodes has been limited by its low hole mobility and fast electron‐hole recombination. Host‐guest architectures have emerged as a suitable design, which involves the use of a nanostructured collector for high solar absorption while maintaining an ultrathin absorber layer for better charge transport. In this study, a thin mesoporous SiO 2 host template coated with a conductive thin layer of TiO 2 was optimized to support the α‐Fe 2 O 3 film. The α‐Fe 2 O 3 thin layer was deposited by spray pyrolysis and then coated with a FeNiOOH co‐catalyst. A photocurrent improvement of ca . 85% over planar α‐Fe 2 O 3 thin film reference was registered demonstrating the potential of this host‐guest approach.

Francisco, Filipe↗

Low Temperature Solution‐Processed Sb:SnO 2 Nanocrystals for Efficient Planar Perovskite Solar Cells

Abstract Inorganic metal oxide electron‐transport layers (ETLs) have the potential to yield perovskite solar cells with improved stability, but generally need high temperature to form conductive and defect‐less forms, which is not compatible with the fabrication of flexible and tandem solar cells. Here, we demonstrate a facile strategy for developing efficient inorganic ETLs by doping SnO 2 nanocrystals (NCs) with a small amount of Sb using a low‐temperature solution‐processed method. The electrical conductivity was remarkably enhanced by Sb‐doping, which increased the carrier concentration in Sb:SnO 2 NCs. Moreover, the upward shift of the Fermi level owing to doping results in improved energy level alignment, which led to reduced charge recombination, and thus longer electron recombination lifetime and improved open‐circuit voltage ( V OC ). Therefore, Sb‐doping of SnO 2 significantly enhanced the photovoltaic performance of planar perovskite devices by increasing the fill factor and V OC , and reducing photocurrent hysteresis, extending the potential application of low‐temperature‐processed ETLs in future flexible and tandem solar cells.

Bai, Yang↗