Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Plasma synthesized boron nano-sized powder: The effect of processing conditions on the crystallographic and microstructural properties

Boron nano-sized powders (doped and undoped) were synthesized by the reaction of boron trichloride, BCl{sub 3}, and hydrogen, H{sub 2}, in a plasma. The gases were mixed and injected into an argon RF plasma where they combined and formed boron powder via gas phase nucleation. Methane gas, CH{sub 4}, was added in the case of carbon-doped powder. These powders were found to be suitable for the fabrication of high performance superconducting magnesium diboride (MgB{sub 2}) wires. Plasma synthesized boron particles typically had the shape of low aspect ratio spheroids that tended to form open, lacy agglomerates. Particle sizes ranged from 10 to 250 nm. A typical batch of boron powder contained a mixture of amorphous and crystalline material. In this study, the effects of plasma power and carbon dopant addition on the crystallinity, particle size, and microstructure of boron nanopowder were investigated using powder x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAD). Particle size distribution was measured using SEM and TEM images. SAD patterns showed the characteristic halo of an amorphous material, but single crystal reflections were observed as well. Wires made from these powders attained 60,000 A/cm{sup 2} at 5 K and 5 Tesla and attained 25,000 A/cm{sup 2} at 20 K and 3 Tesla.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bioaerosol Properties using WIBS from SAIL on Mt. Crested Butte, CO

We deployed a Wideband Integrated Bioaerosol Sensor (WIBS-Neo, DMT) to measure different properties of fluorescent bioaerosol particles (FBAP) during SAIL. Our measurements were collected at the supplementary site on Crested Butte Mountain from inside the ARM Aerosol Observing System (AOS) sampling from the AOS inlet. We had two deployment periods at SAIL during biologically active seasons: summer 2022 (15 June 2022 - 13 September 2022) and spring 2023 (21 March 2023 - 19 June 2023). The WIBS is an online single-particle measurement that detects FBAPs (within a size range of 0.5 - 30 microns in diameter) based on the excitation and emission wavelengths of the individual particles. Using two xenon lamps, the WIBS excites FBAPs at 280 nm and 370 nm. Their emission is detected across two wavebands of 310-400 nm and 420-650 nm. We classified the FBAPs into seven different categories (A, B, C, AB, BC, AC, and ABC) using the classification scheme in Perring et. al. (2015) [1]. Here, we report one-minute averaged number concentration of FBAPs (total and by category) and NFBAPs. We also present one-minute-averaged size distributions and the asymmetry factor (AF, a surrogate for shape) of all FBAPs and NFBAPs. The logarithmic bin width of the size bins is the same as the average bin width of the AOS's optical particle counter (OPC, Grimm) for the range of sizes in which they overlap (26 bins from 0.5 - 30 microns). AF of the particles ranges from 0-100 and is divided into five bins with a linear spacing at increments of 20. The smallest AF bin represents more spherical particles while the largest bin represents more rod-shaped particles. We recommend referring to the readme file for more details of the variables present in the files. [1] Perring, A. E., et al. (2015), Airborne observations of regional variation in fluorescent aerosol across the United States, J. Geophys. Res. Atmos., 120, 1153-1170, doi:10.1002/2014JD022495. Abstract and description of the campaign can be found here: https://www.arm.gov/research/cam

54 ENVIRONMENTAL SCIENCES↗

Effect of shape and friction on the packing and flow of granular materials

Here, the packing and flow of aspherical frictional particles are studied using discrete element simulations. Particles are superballs with shape |x| s + |y| s + |z| s = 1 that varies from sphere (s = 2) to cube (s = ∞), constructed with an overlapping-sphere model. Both packing fraction, Φ, and coordination number, z, decrease monotonically with microscopic friction μ, for all shapes. However, this decrease is more dramatic for larger s due to a reduction in the fraction of face-face contacts with increasing friction. For flowing grains, the dynamic friction ~μ —the ratio of shear to normal stresses—depends on shape, microscopic friction, and inertial number I . For all shapes, ˜μ grows from its quasistatic value ˜μ 0 as (˜μ - ˜μ 0 ) = dI α , with different universal behavior for frictional and frictionless shapes. For frictionless shapes the exponent α ≈ 0.5 and prefactor d ≈ 5˜μ 0 while for frictional shapes α ≈ 1 and d varies only slightly. Lastly, the results highlight that the flow exponents are universal and are consistent for all the shapes simulated here.

36 MATERIALS SCIENCE↗

A fully implicit, conservative, non-linear, electromagnetic hybrid particle-ion/fluid-electron algorithm

The quasi-neutral hybrid model with kinetic ions and fluid electrons is a promising approach for bridging the inherent multi-scale nature of many problems in space and laboratory plasmas. A novel, implicit, particle-in-cell based scheme for the hybrid model is derived for fully 3D electromagnetic problems with multiple ion species, which features global mass, momentum and energy conservation. The scheme includes sub-cycling and orbit-averaging for the ions, with cell-centered finite differences and implicit midpoint time advance. To reduce discrete particle noise, the scheme allows arbitrary-order shape functions for the particle-mesh interpolations and the application of conservative binomial smoothing. The algorithm is verified for a number of test problems to demonstrate the correctness of the implementation, the unique conservation properties, and the favorable stability properties of the new scheme. In particular, there is no indication of unstable growth of the finite-grid instability for a population of cold ions drifting through a uniform spatial mesh, in a set-up where several commonly used non-conservative schemes are highly unstable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synthesis, characterization and photocatalytic properties of novel zinc germanate nano-materials

We report the first instance of a hydrothermal synthesis of zinc germanate (Zn{sub 2}GeO{sub 4}) nano-materials having a variety of morphologies and photochemical properties in surfactant, template and catalyst-free conditions. A systematic variation of synthesis conditions and detailed characterization using X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, Raman spectroscopy, electron microscopy, X-ray photoelectron spectroscopy and small angle X-ray scattering led to a better understanding of the growth of these particles from solution. At 140 {sup o}C, the zinc germanate particle morphology changes with pH from flower-shaped at pH 6.0, to poly-disperse nano-rods at pH 10 when the Zn to Ge ratio in the synthesis solution is 2. When the Zn to Ge ratio is reduced to 1.25, mono-disperse nano-rods could be prepared at pH 7.5. Nanorod formation is also independent of the addition of cetyltrimethylammonium bromide (CTAB), in contrast to previous reports. Photocatalytic tests show that Zn{sub 2}GeO{sub 4} nano-rods (by weight) and flower shaped (by surface area) are the most active for methylene blue dye degradation among the synthesized zinc germanate materials. -- Graphical abstract: Zinc germanate materials were synthesized possessing unique morphologies dependent on the hydrothermal synthesis conditions in the absence of surfactant, catalyst or template. These novel materials are characterized and evaluated for their photocatalytic activities. Display Omitted highlights: > Zinc germanate synthesized hydrothermally (surfactant free) with unique morphologies. > Flower-shaped, nano-rods, globular particles obtained dependent on synthesis pH. > At 140 {sup o}C, they possess the rhombohedral crystal irrespective of synthesis conditions. > They are photocatalytically active for the degradation of methylene blue. > Potential applications could be photocatalytic water splitting and CO{sub 2} reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An updated estimate of the Mu2e experiment sensitivity

The Mu2e experiment at Fermilab will search for the conversion of a negative muon into an electron inside the field of a nucleus. This process does not conserve charged-lepton flavour and is heavily suppressed in the Standard Model (SM), with a branching ratio < 10-50. Any evidence of it would be an undeniable evidence of new physics beyond the SM. The project sets out to achieve a single event sensitivity of $\sim 3 × 10^{-17}$ on the ratio between the probability for a conversion of a negative muon into an electron and the one for a muon capture by the nucleus. Such a sensitivity would represent a 4 orders of magnitude improvement on the previous upper limit for the process, making possible to test predictions of different extensions of the SM. Mu2e uses three superconducting solenoids to produce and measure the muon conversions. In the first solenoid, the Production Solenoid, pions and kaons are produced, together with other secondary products, by 8 GeV kinetic energy proton interactions in a tungsten target. A gradient magnetic field is specifically designed to direct low momentum particles into the Transport Solenoid, an S-shaped magnet that filters out particles with unwanted charge and momentum. Muons, produced by pion and kaon decays, finally reach the aluminum Stopping Target in the Detector Solenoid, where they eventually stop and convert. The result of the conversion process is a monochromatic electron of ~105 MeV/c momentum. The Detector Solenoid also hosts the two main detectors: a straw tube tracker and two CsI calorimeter disks, both providing measurement of event kinematics. A germanium detector and a LaBr crystal are located downstream of the Detector Solenoid to measure the X and gamma rays produced by the muon captures in the Stopping Target. A veto system of scintillators covering the Detector Solenoid and half of the Transport Solenoid is used to identify and reject cosmic rays interactions. With respect to the initial project, the Mu2e running plan has evolved to a staged configuration with 2 years at reduced intensity before the 2025 accelerator shutdown for the neutrino beam upgrade and 2 or 3 years at full intensity after that. This, together with geometry changes and a better knowledge of detector performances obtained by the first slice tests, has required a full revision of the signal over background selection that is the subject of this thesis. In order to achieve a new estimate of Mu2e sensitivity, the simulation of the data corresponding to the first 2 years of data acquisition has been performed. This includes both conversion electrons (CE) and the main sources of background: cosmics, decay-in orbits (DIO), radiative pion captures (RPC) and antiprotons. The characteristics of the signal and of the main backgrounds have been studied to define the best selection variables for CE. A special effort has been devoted to the evaluation of the antiproton background. The lack of experimental data for antiproton production cross section makes the systematic uncertainty on this background significant. A new parameterization of the cross section has been developed to fit the existing data and to provide a more reliable estimate of the systematic uncertainty by comparing the results of the old and the new model. A special effort has been devoted to the optimization of the antiprotons Monte Carlo generator. This study has also revealed that the dominant component within this background is represented by antiprotons produced in the opposite direction with respect to the Transport Solenoid entrance and then redirected to it by back-scattering processes in the Production Target. This ultimately highlights the sensitivity of the background estimate to the G4 handling of antiproton interactions in the 1 to 3 GeV/c momentum range. Finally, the final experimental sensitivity has been studied. The momentum and time selection have been optimized to obtain the 5-sigma discovery reach or, in case of no signal, the upper limit on conversion probability. The results confirm that, in the firs t two years of data taking, Mu2e will be able to improve the current experimental sensitivity for muon-to-electron conversion in an atomic field by more than 3 order of magnitudes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of the structural features of ε-Co nanoparticles synthesized by cobalt carbonyl decomposition in the presence of surfactant

Cobalt nanoparticles (3–7 nm in size) obtained by cobalt carbonyl decomposition in 1,2-dichlorobenzene in the presence of surfactants (trioctylphosphine oxide and oleic acid) have been studied by a complex of structural methods: small-angle X-ray scattering, electron diffraction, and transmission electron microscopy. The nanoparticles synthesized are found to consist of the cubic ε-Со phase; their crystal structure is described within the sp. gr. P4{sub 1}32, a = 6.097 Å. Using small-angle X-ray scattering, the size and shape of nanoparticles have been determined directly in the liquid dispersion. Most of the particles have a spherical shape; their average size is ≈3.5 ± 0.5 nm, which agrees with the electron microscopy data. Possible factors causing the ε-phase formation during synthesis of metallic Co nanoparticles are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

QCD Theory and Transverse Momentum Dependent Physics

A major challenge for QCD theorists is to understand how to different categories of QCD physics contribute to a single observable. This is the goal of QCD factorization theory. Today, QCD physicists are tasked with describing increasingly detailed properties of transverse momentum dependent particle distributions, including their shapes and normalizations, their variation with energy and other kinematical variables, the identity of particles involved, correlations with spin, and the relationship between transverse momentum distributions in different processes. Embedded within that broad effort are specific fundamental questions at the heart of QCD theory. Namely, how does one give precise, quantitative meaning to quark and gluon concepts in hard scattering events, and what are the limits of those concepts? In the past two decades, there has been a renaissance in TMD QCD, with a broad spectrum of motivations driving the study of TMD observables. TMD QCD studies are in a transformative stage; subfields that traditionally progressed nearly independently of one other, such as hadronic structure studies and the study of perturbative QCD gluon radiation in high-energy collisions, are becoming intertwined. It is thus becoming increasingly clear that unified approaches -- those that incorporate all the relevant phenomena into a single formalism rooted in QCD fundamentals -- will be critical to the mission to expand the current understanding of QCD nuclear/hadronic dynamics. TMD QCD factorization theorems and their generalizations will be central to these efforts. The factorization theorems, in addition, provide the practical prescription for applying specific calculations to phenomenology. The goal of this project was to unify and push the boundaries of traditional TMD research and prepare it for use in future phenomenological applications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A neutron-gamma pulse shape discrimination method based on pure and mixed sources

We present a novel trainable approach to distinguish neutrons from gammas using a particle detector. Traditionally, Pulse Shape Discrimination (PSD) methods for this problem utilize an ad-hoc computation of tail signal energy to perform the detection. Our first contribution is a rigorous analysis of the performance of this existing approach on gold standard Time of Flight (TOF) data. While this approach performs well for high energy pulses, its accuracy drops dramatically as the pulse energy decreases. Our second contribution is a novel data driven classifier that is trained from two readily available sources: one that emits gamma particles (Cs-137), and another that emits a mixture of gamma and neutron particles (Cf-252). We test our approach using TOF experiments and show a marked improvement in accuracy over the traditional method for low false positive rates and low energies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Iridium Atoms Bonded to Crystalline Powder MgO: Characterization by Imaging and Spectroscopy

Samples with low loadings of metals on well-defined supports provide some of the best opportunities to determine the metal–support structure and bonding. We illustrate methods for characterizing atomically dispersed heavy metals on metal oxide supports by aberration-corrected scanning transmission electron microscopy (STEM) complemented by fluorescence detection extended X-ray absorption fine structure and infrared spectroscopies. STEM images of Ir atoms derived from Ir(C 2 H 4 ) 2 (acac) (acac = acetylacetonato) on high-surface-area MgO powder were obtained with minimized electron beam damage by quickly recording images near where the focus had been established. The images show that iridium at a loading of 1.0 wt % on MgO calcined at 1073 K was atomically dispersed, populating much of the surface of the MgO particles, which had irregular shapes—consequently the Ir atoms were bonded at various sites to two or three surface O atoms. In contrast, MgO calcined at 1273 K consisted of almost perfectly cubic crystals, and Ir atoms at a loading of only 0.01 wt % on this nearly ideal support were anchored preferentially at edges and corners of the (100) faces and bonded to three surface O atoms. The latter results indicate a path forward for the determination of precise structures of atomically dispersed metals on crystalline metal oxide supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Critical Superfluid Velocity in a Trapped Dipolar Gas

We investigate the superfluid properties of a dipolar Bose-Einstein condensate (BEC) in a fully three-dimensional trap. Specifically, we estimate a superfluid critical velocity for this system by applying the Landau criterion to its discrete quasiparticle spectrum. We test this critical velocity by direct numerical simulation of condensate depletion as a blue-detuned laser moves through the condensate. In both cases, the presence of the roton in the spectrum serves to lower the critical velocity beyond a critical particle number. Since the shape of the dispersion, and hence the roton minimum, is tunable as a function of particle number, we thereby propose an experiment that can simultaneously measure the Landau critical velocity of a dipolar BEC and demonstrate the presence of the roton in this system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chapter 4 - Mechanical Fractionations of Biomass Feedstocks for Enhanced Pretreatment and Conversion. In the book Biomass Preprocessing and Pretreatments for Production of Biofuels: Mechanical, Chemical and Thermal Methods.

Living plant biomass consists of multiple types of tissues and organs, each performing unique and essential physical or biological functions in the living plant. Because of these differences in form and function, these tissues and organs can retain these unique physical and chemical properties after senescence or harvest. Properties such as ash composition, ash content, carbohydrate content, lignin content, density, and recalcitrance can vary widely between plant parts and tissues. Mechanical fractionation of biomass feedstocks has the potential to take advantage of these naturally occurring differences to produce physically or chemically unique fractions that have higher or lower value within specific biochemical or thermochemical conversion platforms. Mechanical fractionation techniques that have shown promise include density separations in air or liquid, size separations, and automated sorting. Density separations, such as air classification, separate based on particle density, size, and shape. Size separations are highly dependent upon size reduction techniques, however anatomical differences can affect particle size. The chemical and physical properties of the resulting fractions help determine their optimal use. These unique fractions can be used directly or treated as ingredients and blended with other feedstocks or fractions of feedstocks to meet cost, quality, or conversion specifications.

09 BIOMASS FUELS↗

Modulation of Tetravalent Actinide Oxalate Morphology through Organic Compounds

Spent nuclear fuel of pressurized water reactors mainly consists of uranium, plutonium, minor actinides and fission products. The long term radiotoxicity of wastes is mainly due to plutonium and minor actinides such as neptunium, americium and curium. So, in order both to reduce the radiotoxicity of the ultimate wastes and to save uranium resources, researches for current and new generations of nuclear plants focus on the recycling of plutonium and minor actinides, to fabricate new mixed oxides nuclear fuel pellets (MOX) or transmutation targets. In this aim, production of actinide oxides is necessary. Currently, according to the Purex process, the spent fuel is dissolved in nitric acid and then valuable actinides (uranium and plutonium) are separated and purified from fission products and minor actinides in the Areva plant 'La Hague'. The resulting plutonium nitric solution is converted into a solid phase by oxalic conversion: the oxalic precipitation is followed by the calcination of the obtained oxalate into plutonium oxide. Considering either the MOX fuel or the transmutation targets fabrication from actinide oxides, the control of the particle structure and microstructure is a key factor related to the ability of oxide powder to sinter and shape as pellets. In the oxalic conversion process, the morphology of the precipitated oxalate is strongly influenced by the precipitation conditions and is kept during the calcination from oxalate into oxide. In this context, the aim of this work is to control the morphology of the final actinide oxide by changing the oxalic precipitation conditions. A lot of possibilities can be considered to modulate the morphology of actinide oxalates. Numerous parameters such as temperature, pressure, the presence of a magnetic field, the operating process (seeding, emulsions)... can modify the precipitated particles shape. Additives are also able to play a major role at the precipitation stage by means of different mechanisms involving either complexation, surface covering or structure insertion. This study focuses on this way to modify the morphology of actinides oxalates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermoelectric figure of merit of a material consisting of semiconductor or metal particles

It is found that the dimensionless thermoelectric figure of merit of a material consisting of a large number of ball-shaped semiconductor or metal particles can be much more than unity. The introduction of an insulator into the space between the particles is shown to sharply increase the power of the converter of heat energy into electric current energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigating late-stage particle production in pp collisions with balance functions

Balance functions have been regarded in the past as a method of investigating the late-stage hadronization found in the presence of a strongly-coupled medium. They are also used to constrain mechanisms of particle production in large and small collision systems. Charge balance functions for inclusive and identified particle pairs are reported as a function of charged particle multiplicity in proton–proton collisions simulated with the PYTHIA8 and the EPOS4 models. The charge balance functions of inclusive, pion, kaon, and proton pairs exhibit amplitudes and shapes that depend on particle species and differ significantly in the two models due to the different particle production mechanisms implemented in PYTHIA and EPOS. The shapes and amplitudes also evolve with multiplicity in both models. In addition, the evolution of the longitudinal rms width and that of balance functions integrals with multiplicity (and average transverse momentum) feature significant differences in the two models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A study on spherical particles in Al65Cu20Fe15 alloy prepared by arc melting

Highlights: • Spherical particles and facets were found. • Spherical particles consist of quasicrystalline grains embedded in single crystal matrix. • Facets were found on the surface of spherical particles, which can be classified to three types. • A model for the formation of spherical particles is suggested. • Reasons for the formation of facets are discussed. - Abstract: Al-Cu-Fe alloys are important due to reports that stable icosahedral quasicrystalline phase with composition in the vicinity of Al{sub 65}Cu{sub 20}Fe{sub 15} can be prepared. However, it has been widely reported that the as-prepared alloy, very often by arc-melting, is porous, consisting of particles with different morphologies. Among these, one type of particles of a spherical shape is considered as pure cubic β phase in previous reports. In this research, this spherical particle was studied using a Scanning Electron Microscope, Energy Dispersive X-ray Spectroscopy, Transmission Electron Microscope, and Electron Diffraction. It was found that the particles are not single phase, consisting of icosahedral quasicrystalline grains embedded inside single crystal matrix of τ phase. Additionally, there are places where the τ phase appears to have out-most layer enriched in Cu. The surface of the particles is faceted and the facets can be classified to three types according to their detailed structures. A close examination and analysis led to the conclusion that these three types are parallel to the atomic planes of {1 1 0}, {1 1 1}, and {1 0 0}, respectively. A model for the spherical particle formation is suggested and the reasons for the formation of facets are discussed. This report is valuable in clarifying some discrepancies in previous reports, and in understanding the phase development in an Al-Cu-Fe alloy system.

36 MATERIALS SCIENCE↗

Gaussian Lagrangian stochastic models for multi-particle dispersion

We have extended the “well-mixed” two-particle stochastic models for 3D Gaussian turbulence to n particles, and have performed calculations for clusters of n ≤ 6 particles. The particle joint motions are Gaussian and are constrained by pair-wise spatial correlations. This neglects non-Gaussian properties of the two-point velocity distribution and also neglects multi-point correlations. It also takes no account of intermittency. Although the models do not predict the growth of the separation of particles in the cluster satisfactorily, we find that they do give a good representation of the shape statistics for the cluster in comparison with direct numerical simulation results. We conclude that the pair-wise spatial structure of the turbulence accounts for most of the observed characteristics of the shape of multi-particle clusters in turbulence, and that non-Gaussian and multi-point features of the turbulence are of secondary importance.

42 ENGINEERING↗