Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROXIMITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Spacecraft flight simulation: A human factors investigation into the man-machine interface between an astronaut and a spacecraft performing docking maneuvers and other proximity operations

The anticipated increase in rendezvous and docking activities in the various space programs in the Space Station era necessitates a renewed interest in manual docking procedures. Ten test subjects participated in computer simulated docking missions in which the influence of initial velocity was examined. All missions started from a resting position of 304.8 meters (1000 feet) along the space station's +V-bar axis. Test subjects controlled their vehicle with a translational hand controller and digital auto pilot which are both virtually identical to their space shuttle counterparts. While the 0.1 percent rule (range rate is equal to 0.1 percent of the range) used by space shuttle pilots is comfortably safe, it is revealed to be extremely inefficient in terms of time and not justifiable in terms of marginal safety. Time is worth money, not only because of training and launch costs, but because the sooner a pilot and spacecraft return from a mission, the sooner they can begin the next one. Inexperienced test subjects reduced the costs of simulated docking by close to a factor of 2 and achieved safe dockings in less than 4 percent of the time the baseline approach would entail. This reduction in time can be used to save lives in the event of an accident on orbit, and can tremendously reduce docking costs if fuel is produced from waste water on orbit.

Brody, Adam R.↗
NASA NTRS1990

Proximal Cretaceous-Tertiary boundary impact deposits in the Caribbean

Trace element, isotopic, and mineralogic studies indicate that the proposed impact at the Cretaceous-Tertiary boundary occurred in an ocean basin, although a minor component of continental material is required. The size and abundance of shocked minerals and the restricted geographic occurrence of the ejecta layer and impact-wave deposits suggest an impact between the Americas. Coarse boundary sediments at sites 151 and 153 in the Colombian Basin and 5- to 450-meter-thick boundary sediments in Cuba may be deposits of a giant wave produced by a nearby oceanic impact.

Hildebrand, Alan R.↗
NASA NTRS1990

Hot gas environment around STOVL aircraft in ground proximity. II - Numerical study

Ingestion of hot exhaust gases by the engines of STOVL aircraft has been an important research problem for several years. The hot gas environment around STOVL aircraft is three-dimensional and turbulent. In this study, the Navier-Stokes equations governing the hot gas ingestion flowfield are solved by an efficient finite-difference calculation procedure. The complete geometry including the head wind and the fuselage is simulated. Four demonstration calculations with variations in the height of the fuselage and the head wind velocity are presented. It is shown that the calculation procedure efficiently provides a solution to the governing equations and produces realistic descriptions of the flow and temperature fields.

Tafti, D. K.↗
NASA NTRS1990

A dynamical proximity analysis of interacting galaxy pairs

Using the impulsive approximation to study the velocity changes of stars during disk-sphere collisions and a method due to Bottlinger to study the post collision orbits of stars, the formation of various types of interacting galaxies is studied as a function of the distance of closest approach between the two galaxies.

Chatterjee, Tapan K.↗
NASA NTRS1991

Collision detection for spacecraft proximity operations

A new collision detection algorithm has been developed for use when two spacecraft are operating in the same vicinity. The two spacecraft are modeled as unions of convex polyhedra, where the resulting polyhedron many be either convex or nonconvex. The relative motion of the two spacecraft is assumed to be such that one vehicle is moving with constant linear and angular velocity with respect to the other. Contacts between the vertices, faces, and edges of the polyhedra representing the two spacecraft are shown to occur when the value of one or more of a set of functions is zero. The collision detection algorithm is then formulated as a search for the zeros (roots) of these functions. Special properties of the functions for the assumed relative trajectory are exploited to expedite the zero search. The new algorithm is the first algorithm that can solve the collision detection problem exactly for relative motion with constant angular velocity. This is a significant improvement over models of rotational motion used in previous collision detection algorithms.

Vaughan, Robin M.↗
NASA NTRS1991

Approximate reasoning-based learning and control for proximity operations and docking in space

A recently proposed hybrid-neutral-network and fuzzy-logic-control architecture is applied to a fuzzy logic controller developed for attitude control of the Space Shuttle. A model using reinforcement learning and learning from past experience for fine-tuning its knowledge base is proposed. Two main components of this approximate reasoning-based intelligent control (ARIC) model - an action-state evaluation network and action selection network are described as well as the Space Shuttle attitude controller. An ARIC model for the controller is presented, and it is noted that the input layer in each network includes three nodes representing the angle error, angle error rate, and bias node. Preliminary results indicate that the controller can hold the pitch rate within its desired deadband and starts to use the jets at about 500 sec in the run.

Berenji, Hamid R.↗
NASA NTRS1992

Viscous flow past a nacelle isolated and in proximity of a flat plate

Linearized-theory design procedures have proven to be useful in preliminary design stages of supersonic aircraft configurations. These procedures are impaired, however, by their inability to account for certain nonlinear effects inherent in complicated flows. The present computations are aimed at providing necessary information for correction and improvement of a particular linearized design method. Three-dimensional, viscous, supersonic flows past nacelle and nacelle-flat plate configurations are investigated. The thin-layer Navier-Stokes equations are solved using an implicit, upwind-biased, finite-volume method. A hybrid domain decomposition technique is utilized to ease the grid generation task. Computations were made for an unit Reynolds number of 2.0 million per foot and Freestream Mach numbers of 1.6, 2.0, and 2.3.

Fouladi, Kamran↗
NASA NTRS1991

Demonstration of automated proximity and docking technologies

An autodock was demonstrated using straightforward techniques and real sensor hardware. A simulation testbed was established and validated. The sensor design was refined with improved optical performance and image processing noise mitigation techniques, and the sensor is ready for production from off-the-shelf components. The autonomous spacecraft architecture is defined. The areas of sensors, docking hardware, propulsion, and avionics are included in the design. The Guidance Navigation and Control architecture and requirements are developed. Modular structures suitable for automated control are used. The spacecraft system manager functions including configuration, resource, and redundancy management are defined. The requirements for autonomous spacecraft executive are defined. High level decisionmaking, mission planning, and mission contingency recovery are a part of this. The next step is to do flight demonstrations. After the presentation the following question was asked. How do you define validation? There are two components to validation definition: software simulation with formal and vigorous validation, and hardware and facility performance validated with respect to software already validated against analytical profile.

Anderson, Robert L.↗
NASA NTRS1991

On-orbit demonstrations of automated closure and capture using ESA-developed proximity operations technologies and an existing serviceable NASA Explorer platform spacecraft

Since 1984 the European Space Agency (ESA) has been working to develop an autonomous rendezvous and docking capability to enable Hermes to dock automatically with Columbus. As a result, ESA (with Matra, MBB, and other space companies) have developed technologies that are directly supportive of the current NASA initiative for Automated Rendezvous and Capture. Fairchild and Matra would like to discuss the results of the applicable ESA/Matra rendezvous and capture developments and suggest how these capabilities could be used together with an existing NASA Explorer Platform satellite to minimize new development and accomplish a cost-effective automatic closure and capture demonstration program.

Hohweisner, Bill↗
NASA NTRS1991

Space shuttle program: Automatic rendezvous, proximity operations, and capture

An overview of the current NASA JSC capabilities and ongoing activities for the design, development, and demonstration of AR&C capabilities was provided. The JSC plans for ground and flight tests/demonstrations of progressive AR&C capabilities, using the Space Shuttle are described. The Space Shuttle could provide an effective 'flying test bed' for these demonstrations.

Jackson, William↗
NASA NTRS1991

The real-time operations of the Space Shuttle Orbiter during rendezvous and proximity operations

The Space Shuttle Orbiter is the only U.S. spacecraft in operation today that routinely performs an orbital rendezvous with another spacecraft. The trajectory planning and training of both flight crews and ground operations personnel required to achieve a 100 percent success rate is considerable. The preflight planning and training can be reduced through very simple design considerations of a new space vehicle.

Dougherty, Andrew↗
NASA NTRS1991

Results of prototype software development for automation of shuttle proximity operations

A Rendezvous Expert System (REX) was implemented on a Symbolics 3650 processor and integrated with the 6 DOF, high fidelity Systems Engineering Simulator (SES) at the NASA Johnson Space Center in Houston, Texas. The project goals were to automate the terminal phase of a shuttle rendezvous, normally flown manually by the crew, and proceed automatically to docking with the Space Station Freedom (SSF). The project goals were successfully demonstrated to various flight crew members, managers, and engineers in the technical community at JSC. The project was funded by NASA's Office of Space Flight, Advanced Program Development Division. Because of the complexity of the task, the REX development was divided into two distinct efforts. One to handle the guidance and control function using perfect navigation data, and another to provide the required visuals for the system management functions needed to give visibility to the crew members of the progress being made towards docking the shuttle with the LVLH stabilized SSF.

Hiers, Harry K.↗
NASA NTRS1991

The role of smart systems in rendezvous, close proximity operations and docking maneuvers

Various missions scenarios (Space Station logistics, LEO and GEO services, and SEI operation) will involve flexibility in mission management. This means operations will be one or a combination of the following: autonomous, supervised autonomous, and machine aided manual control. Smart Systems will likely play a significant role in making these missions successful from a safety/reliability perspective and less costly from an operations perspective. This does not imply that Smart Systems need to be super sophisticated. On the contrary, Smart Systems have been described as automated intelligence that if a person had done it wrong, it would be considered stupid. The first part of this paper will describe the types of Smart System techniques involved in AR and CC, their specifications, duties, and interactions. Next will be a discussion of the work performed under the auspice of the ALS Program to further Expert Systems applications imbedded in the control process, NASA/JSC CRAD, and other related IRAD projects. This will include issues pertaining to the following: integration, speed, knowledge encapsulation, and cooperative systems. Finally, a brief description will be offered to outline the major obstacles for the acceptance of Smart Systems in critical applications.

Szatkowski, Gerard P.↗