Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROJECTILES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Impact mechanics of the Cretaceous-Tertiary extinction bolide

An examination of the mechanics of asteroidal, cometary, and meteor swarm impact on the earth determined if the enrichment of projectile material in the K-T layer is consistent with melts and impact breccias on the earth and moon, the size of the impacters, the distribution of the kinetic energy, and the sequence of impacts that could give rise to observed extinction phenomena. Flows resulting from spherical projectile impacts onto layers of air, water, and silicates were modeled and Eulerian finite difference algorithms were employed to solve conservation equations and equations of state. A range of speeds and impacter densities were considered, along with sizes from 0.17 km, which would be consumed in the atmosphere, to a 10 km object, which would have had a diameter greater than a reference 7.1 km atmosphere depth. It is concluded that an impact of the K-T bolide could result in global biotic extinction and worldwide material deposition.

Okeefe, J. D.↗

Z-model analysis of impact cratering - An overview

The Maxwell Z-Model has been applied to two continuum mechanics computer calculations: (1) a laboratory-scale impact of an aluminum projectile into plasticene clay, and (2) a planetary-scale impact of an iron meteor into gabbroic anorthosite. The material flow in the cratering flow field may be well approximated by incompressible flow for most of the excavation stage of crater growth. The center of the flow field is located beneath, not at, the surface. Soon after energy partitioning is complete, Z can assume values less than 2.0 associated with the initial directedness of the projectile's momentum. The Z-Model parameters are time dependent during a significant portion of the crater growth time, and Z increases steadily with time from about 2.0 or slightly less at the beginning of the excavation stage to level off at values in the neighborhood of about 3.0 before the excavation stage is half-over.

Austin, M. G.↗

Progressive impact cratering

Most cratering experiments are designed to study the effects of a single hypervelocity impact into a target of uniform properties. Experiments involving multiple impacts are usually limited to low velocity projectiles and unconsolidated target materials. Gault described saturation cratering in an unconsolidated target. Quaide and Oberbeck studied crater forms produced by hypervelocity impact into layered targets. Several investigators have modeled the generation of either a regolith or megaregolith by repeated impact on planetary surfaces. Studies now in progress examine changes in crater morphology and target properties by repeated impact into an initially consolidated target. Current studies employ low velocity projectiles (2 g at 0.5 km/sec) and consolidated salt targets. Records of crater size, morphology, and accumulated ejecta thickness are maintained as impacts collect on the surface.

Dehon, R. A.↗

The effect of viscosity on impact cratering and possible application to the icy satellites of Saturn and Jupiter

Impact experiments in Newtonian fluids with a range of viscosities of 0.001 to 60 Pa s demonstrate that transient crater volume and shape depend on target viscosity as well as on gravity. Volume is reduced, and depth-to-diameter ratio is increased for cratering events in which viscosity plays a dominant role. In addition to being affected by target kinematic viscosity, viscous scaling is most strongly influenced by projectile diameter, less strongly by projectile velocity, and least strongly by gravity. In a planetary context, viscous effects can occur for craters formed by small or slow moving impacting bodies, low planetary surface densities, high surface viscosities, and low gravity values; conditions all likely for certain impacts into the icy satellites of Saturn and Jupiter, especially if liquid mantles were still present beneath solid crusts. Age dating based on crater counts and size-frequency distributions for these icy bodies may have to be modified to account for the possibility that viscosity-dominated craters were initially smaller and deeper than their gravity-controlled counterparts.

Fink, J.↗

Energy partitioning in an inductively driven rail gun

The equations describing the performance of an inductively driven rail are analyzed numerically. Friction between the projectile and rails is included through an empirical formulation. The equations are applied to the experiment of Rashleigh and Marshall to obtain an estimate of energy distribution in rail guns as a function of time. It is found that only 15 percent of energy delivered by the inductor to the gun is transformed into the kinetic energy of the projectile. This study provides an insight into the nature of nonlinear coupling involved in the electromechanical interactions in a rail gun.

Sen, K. K.↗

Comet flyby sample return experiment

Dust from several comets can be returned to earth with minimum propulsion effort after a high-speed encounter. The collection concept involves the capture of individual dust particles by condensation in a cell after vaporization by a thin diaphragm. This collection concept has been validated in laboratory tests. To compensate for the slower laboratory velocities in a two-stage light-gas gun, higher-density metals (Zn and Cd) have been used for particles and diaphragms to simulate hypervelocity vaporization. Teflon has proved to be a suitable material for the collection cell; more than 50 percent of the vaporized projectile material has been recovered by chemical etching from such cells. Hypervelocity-impact parameters (such as diaphragm-to-projectile ratio, hole size, and plume angles) determined by tests permit the modification of existing analytical models. These new findings are necessary for flyby cometary experiments.

Tsou, P.↗

Arc-driven rail gun research

The equations describing the performance of an inductively-driven rail gun are analyzed numerically. Friction between the projectile and rails is included through an empirical formulation. The equations are applied to the experiment of Rashleigh and Marshall to obtain an estimate of energy distribution in rail guns as a function of time. The effect of frictional heat dissipation on the bore of the gun is calculated. The mechanism of plasma and projectile acceleration in a dc rail gun is described from a microscopic point of view through the establishment of the Hall field. The plasma conductivity is shown to be a tensor indicating that there is a small component of current parallel to the direction of acceleration. The plasma characteristics are evaluated as a function of plasma mass through a simple fluid mechanical analysis of the plasma. By equating the energy dissipated in the plasma with the radiation heat loss, the properties of the plasma are determined.

Ray, P. K.↗

Comments on collision mechanics in ring systems

Collisions within planetary ring systems, especially Saturn's, are discussed. The particles may have coherent icy cores and less coherent granular or frosty surface layers, consistent with thermal eclipse observations. Collisions do not cause catastrophic fragmentation of the particles, although minor surface erosion and reaccretion is possible. Evolution by collisional fragmentation is thus not as important as in the asteroid belt. Models suggest that the fractional number of projectile masses dislodged when solid (or solid-core) projectiles strike solid ice or granular surface layers does not exceed the order of 10 to the minus 7th to minus 9th power. Even at this rate, the half life of ring particles would be less than the age of the solar system in crowded ring regions unless there was very efficient reaccretion. A plausible ring particle model involves solid ice cores with granular surface layers that exchange material by slow erosion and efficient reaccretion; the granular layers protect the cores from rapid erosion.

Hartmann, W. K.↗

Effect of low-velocity or ballistic impact damage on the strength of thin composite and aluminum shear panels

Impact tests were conducted on shear panels fabricated from 6061-T6 aluminum and from woven fabric prepreg of Du Pont Kevlara fiber/epoxy resin and graphite fiber/epoxy resin. The shear panels consisted of three different composite laminates and one aluminum material configuration. Three panel aspect ratios were evaluated for each material configuration. Composite panels were impacted with a 1.27-cm (0.05-in) diameter aluminum sphere at low velocities of 46 m/sec (150 ft/sec) and 67 m/sec (220 ft/sec). Ballistic impact conditions consisted of a tumbled 0.50-caliber projectile impacting loaded composite and aluminum shear panels. The results of these tests indicate that ballistic threshold load (the lowest load which will result in immediate failure upon penetration by the projectile) varied between 0.44 and 0.61 of the average failure load of undamaged panels. The residual strengths of the panels after ballistic impact varied between 0.55 and 0.75 of the average failure strength of the undamaged panels. The low velocity impacts at 67 m/sec (220 ft/sec) caused a 15 to 20 percent reduction in strength, whereas the impacts at 46 m/sec (150 ft/sec) resulted in negligible strength loss. Good agreement was obtained between the experimental failure strengths and the predicted strength with the point stress failure criterion.

Farley, G. L.↗

Cross sections for the production of fragments with Z greater than or equal to 8 by fragmentation of Z greater than or equal to 9 and less than or equal to 26 nuclei

Charge changing nuclear collisions in plastic nuclear track detectors were studied using a new experimental technique of automatic track measurement for etched tracks in plastic detectors. Partial cross sections for the production of fragments of charge Z approximately 8 were measured for projectile nuclei of charge 9 approximately Z approximately 26 in the detector material CR39 and in silver. for this purpose three independent experiments were performed using Bevalac beams. The first one was an exposure of a stack of CR39 plastic plates to 1.8 GeV/nucl. Ar-40 nuclei. The second one was an exposure of another CR39 stack of 1.7 GeV/nucl. Fe-56 projectiles. In the third experiment a mixed stack of CR39 plates and silver foils was irradiated with 1.7 GeV/nucl. Fe-56 nuclei. Thus the measurement of nuclear cross sections in a light target (CR39 = C12H18O7) and as well in a heavy target (silver) was possible.

Heinrich, W.↗

Low P sub T hadron-nucleus interactions

The possibility of describing hadron-nucleus (hA) interactions is discussed in terms of a number of independent collisions of the projectile inside the target nucleus. This multiple rescattering may occur on a particle or quark parton level. To investigate the characteristics of hA interactions as a function of antineutrinos advantage is taken of the correlation between the average number antineutrinos of collisions of the projectile inside the nucleus and the number Ng of fast protons ejected from the struck nucleus. The relation antineutrinos vs Ng obtained in antineutrinos was used. For a given target nucleus this allows the selection of interactions occurring at different impact parameters.

Holynski, R.↗

A particle-hole calculation for pion production in relativistic heavy-ion collisions

A differential cross section for pi-meson production in peripheral heavy-ion collisions is formulated within the context of a particle-hole model in the Tamm-Dancoff approximation. This is the first attempt at a fully quantum-mechanical particle-hole calculation for pion production in relativistic heavy-ion collisions. The particular reaction studied is an O-16 projectile colliding with a C-12 target at rest. In the projectile a linear combination of isobar-hole states is formed, with the possibility of a coherent isobar giant resonance. The target can be excited to its giant M1 resonance (J-pi = 1(+), T = 1) at 15.11 MeV, or to its isobar analog neighbors, B-12 at 13.4 MeV and N-12 at 17.5 MeV. The theory is compared to recent experimental results.

Norbury, J. W.↗

Symposium on Numerical and Physical Aspects of Aerodynamic Flows, 3rd, California State University, Long Beach, CA, January 21-24, 1985, Proceedings

Among the topics discussed are hydrodynamic stability and turbulent transition, separated flow simulations employing finite difference methods, a quasi-simultaneous finite difference approach for strongly interacting flow, the Newton solution of coupled Euler and boundary layer equations, multielement airfoil aerodynamics, vorticity dynamics, the significance of the thin layer Navier-Stokes approximation, a comparison of interactive and Navier-Stokes calculations of separating boundary layer flows, and a Navier-Stokes analysis for the mechanism of shock wave/boundary layer interactions. Also discussed are transonic interactions of unsteady vortical flows, boundary layers on oscillating airfoils, a laser-interferometer skin friction meter, flow over surface-mounted semibluff bodies, computations for spinning and spin-stabilized supersonic projectiles, transition calculations in three-dimensional flows, the effect of projectile boattailing in transonic flow, flow characteristics of a body of revolution at incidence, the influence of the boundary layer on the leading edge flow of a swept wing, and an interactive scheme for three-dimensional transonic flows.

Source record↗

Theoretical spectral distributions and total cross sections for neutral subthreshold pion production in carbon-carbon collisions

A coherent isobar formalism is employed to model subthreshold production of neutral pions in carbon-carbon collisions at energies below 100 MeV/nucleon. No arbitrary scale factors or adjustable free parameters are used in calculation of the Lorentz-invariant cross sections for pion production in the projectile, which produces an excited state that goes to M1 resonance in the target by conservation of spin and isospin. Pion production is also modeled for the projectile, which also reaches M1 resonance. The overall pion spectral distribution in the center of mass system is then integrated over the energy range 35-84 MeV/nucleon. The results expose an energy loss in the incident ions, as observed experimentally, and indicate that an isobar mechanism is responsible for higher energy pion production. Lower energy pions are a result of thermal processes.

Norbury, J. W.↗

Impact experiments. I - Ejecta velocity distributions and related results from regolith targets

Results are reported of laboratory measurements of the velocity distributions of powdery ejecta of 14 impacts into powders simulating regolith in near vacuum. The impact velocities ranged from 5-2321 m/sec, a velocity range believed prevalent in the early solar system. The powder was mechanically similar to lunar regolith. The projectiles comprised harder materials than the regolith, i.e., pyrex spheres, basalt spheres and cylinders, and igneous rocks. High-speed photography was employed to record the events. The differences between the present results and those from hypervelocity impacts are discussed in detail. Notably, an impact velocity threshold was detected between 10-30 m/sec, below which the amount of ejecta is less than the projectile mass.

Hartmann, W. K.↗

Laser-photodetector timing station instruction and maintenance manual

A laser photodetector station is used for detecting the arrival of a projectile at a specific point along a ballistic range. The system can be employed on either an open or evacuated range, with small projectiles, and at hypervelocities. The setup procedures, maintenance, and system components are described.

Strader, E. A.↗

A planetary ultra hypervelocity impact mechanics and shock wave science facility

Using the concept of intercepting orbits from a pair of Space Station serviced free flyers, a class of impact and shock wave experiments pertinent to planetary science can be performed. One proposed free flying vehicle is an impactor dispensor, and the second is the impact laboratory. How collision is achieved by utilizing essentially twice orbital velocity is demonstrated. The impactor dispensor contains a series of small flyer plates or other projectiles which are launched into the trajectory of the impactor laboratory at appropriate positions. The impactor laboratory is a large impact tank similar to those in terrestrial gun laboratories, except that it contains a supply of targets and instrumentation such as high speed cameras, flash X-ray apparatus and digital recorders. Shock and isentropic pressures of up to 20 Mbar are achievable with such a system which provides 15 km/sec impact velocities for precisely oriented projectiles.

Ahrens, T. J.↗

Acoustic penetration and impact detector for micrometeoroid and space debris application

The Two-Stage Acoustic Penetration and Impact Detector is a simple device for measuring the impact event time, the projectile velocity, the flight path direction and the momentum. The results of laboratory tests have shown that this detector can be used in a wide range of projectile size and velocity. According to measurement purposes the size of the detection area, the distance between the front foil and the target plate and the number of microphones as well as the evaluation procedure can easily be adjusted. The target plate area can also be replaced by another foil detector, if two penetration stages are preferred. This active detector is suitable for a variety of applications in meteoroid and space debris exploration. It can also be supplied with capture cell properties for chemical analysis of inside-deposits. Therefore, this measurement principal has been taken into consideration as a possible flight experiment for instance for a later Longer Duration Exposure Facility (LDEF) flight or future space station activities.

Kuzcera, H.↗