Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PORPHYRINS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Ultrafast Excited State Relaxation of a Metalloporphyrin Revealed by Femtosecond X-ray Absorption Spectroscopy

Photoexcited Nickel(II) tetramesitylporphyrin (NiTMP), like many open-shell metalloporphyrins, relaxes rapidly through multiple electronic states following an initial porphyrin-based excitation, some involving metal centered electronic configuration changes that could be harnessed catalytically before excited state relaxation. While a NiTMP excited state present at 100 ps was previously identified by X-ray transient absorption (XTA) spectroscopy at a synchrotron source as a relaxed (d,d) state, the lowest energy excited state (J. Am. Chem. Soc., 2007, 129, 9616 and Chem. Sci., 2010, 1, 642), structural dynamics before thermalization were not resolved due to the similar to 100 ps duration of the available X-ray probe pulse. Using the femtosecond (fs) X-ray pulses of the Linac Coherent Light Source (LCLS), the Ni center electronic configuration from the initial excited state to the relaxed (d,d) state has been obtained via ultrafast Ni K-edge XANES (X-ray absorption near edge structure) on a time scale from hundreds of femtoseconds to 100 ps. This enabled the identification of a short-lived Ni(I) species aided by time-dependent density functional theory (TDDFT) methods. Computed electronic and nuclear structure for critical excited electronic states in the relaxation pathway characterize the dependence of the complex's geometry on the electron occupation of the 3d orbitals. Calculated XANES transitions for these excited states assign a short-lived transient signal to the spectroscopic signature of the Ni(I) species, resulting from intramolecular charge transfer on a time scale that has eluded previous synchrotron studies. These combined results enable us to examine the excited state structural dynamics of NiTMP prior to thermal relaxation and to capture intermediates of potential photocatalytic significance.

Shelby, Megan L.↗

Thermodynamically Guided Synthesis of Mixed-Linker Zr-MOFs with Enhanced Tunability

Guided by thermodynamics, we have synthesized two mixed-linker zirconium-based metal–organic frameworks (Zr-MOFs), namely, PCN-133 and PCN-134. Both of them possess a layer-pillar structure, in which the connection between Zr 6 clusters and primary BTB linkers form a (3,6)-connected kdg layer that is further extended into 3D frameworks by auxiliary DCDPS/TCPP linkers (BTB = benzene tribenzoate, DCDPS = 4,4'-dicarboxydiphenyl sulfone, TCPP = tetrakis(4-carboxyphenyl)porphyrin). PCN-134 demonstrates high porosity (N 2 uptake of 717 cm 3 ·g –1 and BET surface area of 1946 cm 2 ·g –1 ) and excellent chemical stability in aqueous solutions with pH values ranging from 0 to 13. More importantly, PCN-134 tolerates the partial absence of auxiliary linkers leading to structural defects during the assembly process while preserving its framework integrity. Furthermore, the defect density can be systematically controlled by tuning the occupancy of the auxiliary linker, which in turn affects the MOF properties. For instance, the dichromate uptake of PCN-134 is tuned by adjusting the BTB/TCPP ratios, which gives rise to an efficient dichromate absorbent when the TCPP molar ratio in linkers is set as 22%. Additionally, the photocatalytic reduction of Cr(VI) in aqueous solution was also performed by PCN-134–22%TCPP which exhibits excellent catalytic activity. This work not only opens up a new synthetic route toward mixed-linker MOFs, but also provides tunable control of MOF defects and, in turn, the properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure-Based Mechanism for Oxidative Decarboxylation Reactions Mediated by Amino Acids and Heme Propionates in Coproheme Decarboxylase (HemQ)

Coproheme decarboxylase catalyzes two sequential oxidative decarboxylations with H 2 O 2 as the oxidant, coproheme III as substrate and cofactor, and heme b as the product. Each reaction breaks a C-C bond and results in net loss of hydride, via steps that are not clear. Solution and solid-state structural characterization of the protein in complex with a substrate analog revealed a highly unconventional H 2 O 2 -activating distal environment with the reactive propionic acids (2 and 4) on the opposite side of the porphyrin plane. This suggested that, in contrast to direct C-H bond cleavage catalyzed by a high-valent iron intermediate, the coproheme oxidations must occur through mediating amino acid residues. A tyrosine that hydrogen bonds to propionate 2 in a position analogous to the substrate in ascorbate peroxidase is essential for both decarboxylations, while a lysine that salt bridges to propionate 4 is required solely for the second. A mechanism is proposed in which propionate 2 relays an oxidizing equivalent from a coproheme compound I intermediate to the reactive deprotonated tyrosine, forming Tyr • . This residue then abstracts a net hydrogen atom (H • ) from propionate 2, followed by migration of the unpaired propionyl electron to the coproheme iron to yield the ferric harderoheme and CO 2 products. A similar pathway is proposed for decarboxylation of propionate 4, but with a lysine residue as an essential proton shuttle. The proposed reaction suggests an extended relay of heme-mediated e - /H + transfers and a novel route for the conversion of carboxylic acids to alkenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identifying and Breaking Scaling Relations in Molecular Catalysis of Electrochemical Reactions

Improving molecular catalysis for important electrochemical proton-coupled electron transfer (PCET) reactions, such as the interconversions of H+/H2, O2/H2O, CO2/CO, and N2/NH3, is an ongoing challenge. Synthetic modifications to the molecular catalysts are valuable but often show trade-offs between turnover frequency (TOF) and the effective overpotential required to initiate catalysis (?eff). Herein, we derive a new approach for improving efficiencieshigher TOF at lower ?eff by changing the concentrations and properties of the reactants and products, rather than by modifying the catalyst. The dependence of TOF on ?eff is shown to be quite different upon changing, for instance, the pKa of the acid HA versus the concentration or partial pressure of a reactant or product. Using the electrochemical reduction of dioxygen catalyzed by iron porphyrins in DMF as an example, decreasing [HA] 10-fold lowers ?eff by 59 mV and decreases the TOF by a factor of 10. Alternatively, a 10- fold decrease in Ka(HA) also lowers ?eff by 59 mV but only decreases the TOF by a factor of 2. This approach has been used to improve a catalytic TOF by 104 vs the previously reported scaling relationship developed via synthetic modifications to the catalyst. The analysis has the potential to predict improved efficiency and product selectivity of any molecular PCET catalyst, based on its mechanism and rate law.

Pegis, Michael L.↗

Molecular Cobalt Catalysts for O 2 Reduction: Low-Overpotential Production of H 2 O 2 and Comparison with Iron-Based Catalysts

A series of mononuclear pseudo-macrocyclic cobalt complexes have been investigated as catalysts for O2 reduction. Each of these complexes, with CoIII/II reduction potentials that span nearly 400 mV, mediate highly selective two- electron reduction of O2 to H2O2 (93–99%) using decamethylferrocene (Fc*) as the reductant and acetic acid as the proton source. Kinetic studies reveal that the rate exhibits a first- order dependence on [Co] and [AcOH], but no dependence on [O2] or [Fc*]. A linear correlation is observed between log(TOF) vs. E1/2(CoIII/II) for the different cobalt complexes (TOF = turnover frequency). The thermodynamic potential for+ O2 reduction to H2O2 was estimated by measuring the H /H2 open-circuit potential under the reaction conditions. This value provides the basis for direct assessment of the thermodynamic efficiency of the different catalysts and shows that H2O2 is formed with overpotentials as low as 90 mV. These results are compared with a recently reported series of Fe-porphyrin complexes, which catalyze four-electron reduction of O2 to H2O. The data show that the TOFs of the Co complexes exhibit a shallower dependence on E1/2(MIII/II) than the Fe complexes. This behavior, which underlies the low overpotential, is rationalized on the basis of the catalytic rate law.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring Panchromatic Absorption and Excited-State Dynamics of Tetrapyrrole–Chromophore (Bodipy, Rylene) Arrays—Interplay of Orbital Mixing and Configuration Interaction

Here, whree sets of tetrapyrrole–chromophore arrays have been examined that exhibit panchromatic absorption across large portions of the near-ultraviolet (NUV) to near-infrared (NIR) spectrum along with favorable excited-state properties for use in solar-energy conversion. The arrays vary the tetrapyrrole (porphyrin, chlorin, bacteriochlorin), chromophore (boron-dipyrrin, perylene, terrylene), and attachment sites (meso-position, β-pyrrole position). In all, seven dyads, one triad, and nine benchmarks in toluene and benzonitrile were studied using steady-state and time-resolved absorption and fluorescence spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon Dioxide Dimer Radical Anion as Surface Intermediate of Photoinduced CO 2 Reduction at Aqueous Cu and CdSe Nanoparticle Catalysts by Rapid-Scan FT-IR Spectroscopy

Monitoring of visible light sensitized reduction of CO 2 at Cu nanoparticles in aqueous solution by rapid-scan ATR FT-IR spectroscopy on the time scale of seconds allowed structural identification of a one-electron intermediate and demonstrated its kinetic relevancy for the first time. Isotopic labeling ( 12 C: 1632, 1358, 1346 cm -1 ; 13 C: 1588, 1326, 1316 cm -1 ) revealed a species of carbon dioxide dimer radical anion structure, most likely bound to the catalyst surface through carbon. Intermediacy of Cu—C(═O)OCO 2 - surface species is in agreement with a recently proposed mechanism for electrocatalytic CO 2 reduction at Cu metal nanoparticles based on Tafel slope analysis. Spontaneous decrease of the intermediate after termination of the photosensitization pulse (Sn porphyrin excited at 405 nm) was accompanied by the growth of HCO 3 - . CO was produced as well, but sensitive detection required photolysis for tens of minutes. A direct kinetic link between a C 2 O 4 - surface intermediate and the CO product was also demonstrated for photocatalyzed CO 2 reduction at aqueous CdSe nanoparticles, where first order growth of a Cd—C(═O)OCO 2 - species was accompanied by rise of CO (monitored by a fast Ni complex trap) and HCO 3 - showing a distinct induction period. The detection of the one-electron surface intermediate and confirmation of its catalytic relevancy was enabled by the delivery of electrons one-by-one by the photosensitization method. The observation of carbon dioxide dimer radical anion points to approaches for rate enhancements of heterogeneous CO 2 reduction by creating catalytic environments that favor formation of this intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Geometric and Electronic Structure of Synthetic High-Valent Heme Iron(IV)-Oxo Models in the Presence of a Lewis Acid and Various Axial Ligands

High-valent ferryl species (e.g., (Por)Fe IV =O, Cmpd-II) are observed or proposed key oxidizing intermediates in the catalytic cycles of heme-containing enzymes (P-450s, peroxidases, catalases, and cytochrome c oxidase) involved in biological respiration and oxidative metabolism. Herein, various axially ligated iron(IV)-oxo complexes were prepared to examine the influence of the identity of the base. These were generated by addition of various axial ligands (1,5-dicyclohexylimidazole (DCHIm), a tethered-imidazole system, and sodium derivatives of 3,5-dimethoxyphenolate and imidazolate). Characterization was carried out via UV–vis, electron paramagnetic resonance (EPR), 57 Fe Mössbauer, Fe X-ray absorption (XAS), and 54/57 Fe resonance Raman (rR) spectroscopies to confirm their formation and compare the axial ligand perturbation on the electronic and geometric structures of these heme iron(IV)-oxo species. Mössbauer studies confirmed that the axially ligated derivatives were iron(IV) and six-coordinate complexes. XAS and 54/57 Fe rR data correlated with slight elongation of the iron-oxo bond with increasing donation from the axial ligands. The first reported synthetic H-bonded iron(IV)-oxo heme systems were made in the presence of the protic Lewis acid, 2,6-lutidinium triflate (LutH + ), with (or without) DCHIm. Mössbauer, rR, and XAS spectroscopic data indicated the formation of molecular Lewis acid ferryl adducts (rather than full protonation). Here, the reduction potentials of these novel Lewis acid adducts were bracketed through addition of outer-sphere reductants. The oxidizing capabilities of the ferryl species with or without Lewis acid vary drastically; addition of LutH + to F 8 Cmpd-II (F 8 = tetrakis(2,6-difluorophenyl)porphyrinate) increased its reduction potential by more than 890 mV, experimentally confirming that H-bonding interactions can increase the reactivity of ferryl species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water-Soluble Flexible Organic Frameworks That Include and Deliver Proteins

Four water-soluble hydrazone-based three-dimensional (3D) flexible organic frameworks FOF-1-4 have been synthesized from a semirigid tetracationic tetraaldehyde and four flexible dihydrazides. 1 H NMR spectroscopy indicated the quantitative formation of FOF-1-4 in D 2 O, while dynamic light scattering experiments revealed that, depending on the concentration, these porous frameworks display hydrodynamic diameters ranging from 50 to 120 nm. The porosity of the frameworks is confirmed by ethanol vapor adsorption experiments of the solid samples as well as the high loading capacity for a 2.3 nm porphyrin guest in water. The new water-soluble frameworks exhibit low cytotoxicity and form inherent pores with diameters of 5.3 or 6.7 nm, allowing rapid inclusion of proteins such as bovine serum albumin and green and orange fluorescent proteins, and efficient delivery of the proteins into normal and cancer cells. Flow cytometric analysis reveals percentages of the delivered cells up to 99.8%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selectivity-Determining Steps in O 2 Reduction Catalyzed by Iron(tetramesitylporphyrin)

The oxygen reduction reaction (ORR) is the cathode reaction in fuel cells and its selectivity for water over hydrogen peroxide production is important for these technologies. Iron porphyrin catalysts have long been studied for the ORR, but the origins of their selectivity are not well understood because the selectivity-determining step(s) usually occur after the rate-determining step. We report here the effects of acid concentration, as well as other solution conditions such as acid pK a , on the H 2 O 2 /H 2 O selectivity in electrocatalytic ORR by iron(tetramesitylporphyrin) (Fe(TMP)) in DMF. The results show that selectivity reflects a kinetic competition in which the dependence on [HX] is one order greater for the production of H 2 O than H 2 O 2 . Based on such experimental results and computational studies, we propose that the selectivity is governed by competition between protonation of the hydroperoxo intermediate, Fe III (TMP)(OOH), to produce water versus dissociation of the HOO – ligand to yield H 2 O 2 . The data rule out a bifurcation based on the regioselectivity of protonation of the hydroperoxide, as suggested in the enzymatic systems. Furthermore, the analysis developed in this paper should be generally valuable to the study of selectivity in other multi-proton/multi-electron electrocatalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale simulation on a light-harvesting molecular triad

Here, we have investigated the effect of solvation and confinement on an artificial photosynthetic material, carotenoid-porphyrin-C60 molecular triad, by a multiscale approach and an enhanced sampling technique. We have developed a combined approach of quantum chemistry, statistical physics, and all-atomistic molecular dynamics simulation to determine the partial atomic charges of the ground-state triad. To fully explore the free energy landscape of triad, the replica exchange method was applied to enhance the sampling efficiency of the simulations. The confinement effects on the triad were modeled by imposing three sizes of spherocylindrical nanocapsules. The triad is structurally flexible under ambient conditions, and its conformation distribution is manipulated by the choice of water models and confinement. Two types of water models (SPC/E and TIP3P) are used for solvation. When solvated by SPC/E water, whose HOH angle follows an ideal tetrahedron, the structural characteristics of triad is compact in the bulk systems. However, under a certain nanosized confinement that drastically disrupts hydrogen bond networks in solvent, the triad favors an extended configuration. By contrast, the triad solvated by TIP3P water shows a set of U-shaped conformations in the confinement. We have shown that a slight structural difference in the two water models with the same dipole moment can have great distinction in water density, water orientation, and the number of hydrogen bonds in the proximity of a large flexible compound such as the triad. Subsequently, it has direct impact on the position of the triad in a confinement as well as the distribution of conformations at the interface of liquid and solid in a finite-size system.

30 DIRECT ENERGY CONVERSION↗

Multiscale simulation of the ground and photo-induced charge-separated states of a molecular triad in polar organic solvent: Exploring the conformations, fluctuations, and free energy landscapes

Here, the approach of a multiscale simulation that combines quantum chemical calculations, classical molecular dynamics simulations, and statistical physics to integrate the information of the electronic states of a conformationally complex molecule into its structural distribution over an ensemble was performed to understand the influence of a polar organic solvent on the structural stability of carotene-porphyrin-fullerene molecular triad in both the ground and the photoinduced charge-separated excited states. The excited states of the triad were computed with the ab initio quantum chemical calculations using the algebraic diagrammatic construction through the second order correction (ADC(2)) method and the time-dependent density functional theory (TDDFT). The replica exchange molecular dynamics was used for the enhanced sampling of the ensemble in order to explore the phase space of the ground state and the photoinduced charge-separated excited state of triad in explicit tetrahydrofuran (THF) solvent. An importance sampling was strategically employed to bridge the gap between the two computational methods that aim to explore distinct realms of dynamics. We analyzed the free energy landscape, the structural fluctuations, the solvent arrangements, the static dielectric constant, and the interactions between the triad and the solvent molecules. The analysis of the free energy landscape of the triad indicates that the charge-separated excited state of the triad is thermodynamically stable in a linearly extended geometry, while the ground-state triad explores several extended and bent conformations that are populated in the local free energy minima separated by low free energy barriers at an order of thermal fluctuation (kBT). The stabilization of a linearly extended structure of the charge-separated excited state triad is predominantly due to the solvation interactions (van der Waals and electrostatic interactions) between the triad and the THF molecules as well as the interactions within the THF molecules. Differences in the charge distribution on a molecular triad induce slight changes in the dielectric property of THF near the triad. Our study suggests that by measuring the differences in a dielectric response of solvent near the triad, it is possible to provide insight into the population of the charge-separated electronic state of the triad relative to that of the ground state.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Heme biomolecule as redox mediator and oxygen shuttle for efficient charging of lithium-oxygen batteries

One of the greatest challenges with lithium-oxygen batteries involves identifying catalysts that facilitate the growth and evolution of cathode species on an oxygen electrode. Heterogeneous solid catalysts cannot adequately address the problematic overpotentials when the surfaces become passivated. But, there exists a class of biomolecules which have been designed by nature to guide complex solution-based oxygen chemistries. We show that the heme molecule, a common porphyrin cofactor in blood, can function as a soluble redox catalyst and oxygen shuttle for efficient oxygen evolution in non-aqueous Li-O 2 batteries. The heme’s oxygen binding capability facilitates battery recharge by accepting and releasing dissociated oxygen species while benefiting charge transfer with the cathode. We reveal the chemical change of heme redox molecules where synergy exists with the electrolyte species. Our study brings focus to the rational design of solution-based catalysts and suggests a sustainable cross-link between biomolecules and advanced energy storage.

25 ENERGY STORAGE↗

Simultaneous and coordinated rotational switching of all molecular rotors in a network

A range of artificial molecular systems have been created that can exhibit controlled linear and rotational motion. In the development of such systems, a key step is the addition of communication between molecules in a network. Here, we show that a two-dimensional array of dipolar molecular rotors can undergo simultaneous rotational switching by applying an electric field from the tip of a scanning tunnelling microscope. Several hundred rotors made from porphyrin-based double-decker complexes can be simultaneously rotated when in a hexagonal rotor network on a Cu(111) surface by applying biases above ±1 V at 80 K. The phenomenon is observed only in a hexagonal rotor network due to the degeneracy of the ground state dipole rotational energy barrier of the system. Defects are essential to increase electric torque on the rotor network and to stabilize the switched rotor domains. At low biases and low initial rotator angles, slight reorientations of individual rotors can occur resulting in the rotator arms pointing in different directions. In conclusion, analysis reveals that the rotator arm directions here are not random, but are coordinated to minimize energy via cross talk among the rotors through dipolar interactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Anomalous Kondo resonance mediated by semiconducting graphene nanoribbons in a molecular heterostructure

An unusually large spin-coupling of almost 100% is found in vertically stacked molecular hetrostructures composed of cobalt-porphyrin based magnetic molecules adsorbed on semiconducting armchair graphene nanoribbon on a Au(111) surface. Although the graphene nanoribbons are electronically decoupled from the gold substrate due to their band gaps and weak adsorption, they enable spin coupling between the magnetic moment of the molecule and the electrons from the substrate exhibiting a Kondo resonance. Surprisingly, the Kondo temperatures corresponding to three adsorption sites of the molecules on Au(111) surface are reproduced on the molecules adsorb on the graphene nanoribbons although the molecules are located 7.5 Å away from the surface. This finding suggests that the molecules on graphene nanoribbons experience almost the same environment for spin-electron interactions as the ones directly adsorb on Au(111). This puzzling effect is further confirmed by density functional theory calculations that reveal no spin electron interactions if the molecule is left at the same height from the Au(111) surface without the graphene nanoribbon in between.

36 MATERIALS SCIENCE↗

Water-mediated deracemization of a bisporphyrin helicate assisted by diastereoselective encapsulation of chiral guests

Deracemization is a powerful method by which a racemic mixture can be transformed into an excess of one enantiomer with the aid of chiral auxiliaries, but has been applied only to small chiral molecular systems. Here we report a deracemization of a racemic double-stranded spiroborate helicate containing a bisporphyrin unit upon encapsulation of chiral aromatic guests between the bisporphyrin. The chiral guest-included helicate is kinetically stable, existing as a mixture of right- and left-handed double helices, which eventually undergo an inversion of the helicity triggered by water resulting from the water-mediated reversible diastereoselective B-O bond cleavage/reformation of the spiroborate groups, thus producing an optically-active helicate with a high enantioselectivity. Quantum chemical calculations suggest that the stereospecific CH-π interactions between the porphyrin hydrogen atoms of the helicate and an aromatic pendant group of the chiral guest play a key role in the enhancement of the helical handedness of the helicate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloidal crystal engineering with metal–organic framework nanoparticles and DNA

Abstract Colloidal crystal engineering with nucleic acid-modified nanoparticles is a powerful way for preparing 3D superlattices, which may be useful in many areas, including catalysis, sensing, and photonics. To date, the building blocks studied have been primarily based upon metals, metal oxides, chalcogenide semiconductors, and proteins. Here, we show that metal–organic framework nanoparticles (MOF NPs) densely functionalized with oligonucleotides can be programmed to crystallize into a diverse set of superlattices with well-defined crystal symmetries and compositions. Electron microscopy and small-angle X-ray scattering characterization confirm the formation of single-component MOF superlattices, binary MOF–Au single crystals, and two-dimensional MOF nanorod assemblies. Importantly, DNA-modified porphyrinic MOF nanorods (PCN-222) were assembled into 2D superlattices and found to be catalytically active for the photooxidation of 2-chloroethyl ethyl sulfide (CEES, a chemical warfare simulant of mustard gas). Taken together, these new materials and methods provide access to colloidal crystals that incorporate particles with the well-established designer properties of MOFs and, therefore, increase the scope of possibilities for colloidal crystal engineering with DNA.

77 NANOSCIENCE AND NANOTECHNOLOGY↗