Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Extended-MHD simulations of disruption mitigation via massive gas injection in SPARC

Recent developments to the M3D-C1 code enable higher fidelity modeling of disruptions, and can be applied in the design verification of reactor-scale tokamaks. Among these new capabilities is a method to mesh conducting vessel structures such as coils and passive plates, packing of the toroidal mesh around gas injectors, as well as anisotropic resistivity inside the vessel structures. We present extended-magnetohydrodynamic (MHD) simulations of disruption mitigation via massive gas injection (MGI) in SPARC. The goal of this study is to inform the disruption mitigation layout of SPARC and aid in the design of an effective gas injector configuration. Fully three-dimensional simulations with M3D-C1 are carried out for various injector configurations with the primary goal of determining the effect of different MGI parameters on heat loads and vessel forces. The simulations include a model for impurity ionization, recombination, advection and radiation, as well as spatially resolved conducting structures around the plasma. A localized mixture of deuterium and neon with a small toroidal and poloidal width is injected in up to six locations. We demonstrate that M3D-C1 can model a rapid shutdown via MGI using narrow and more realistic gas plumes than in previous simulations. As a result of the q = 1 surface in the SPARC baseline case a sawtooth is observed early in the simulations. Despite the sawtooth and the onset of edge MHD instabilities, the impurity distribution remains localized around the injector locations, but enables a radiative shutdown of the plasma. We find that using the maximum of six gas injectors results in a lower peaking factor and leads to a more even distribution of radiation toroidally than using two injectors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

REBCO Insert Coils toward High-Field, Large-Bore Magnet for Quantum Physics Research

High-temperature superconducting (HTS) magnets offer a promising solution for generating high magnetic fields efficiently and economically, serving as a vital component in nextgeneration scientific instruments and carbon-neutral power systems, notably in cost-effective compact fusion reactors. These high magnetic fields play a pivotal role in advancing research on quantum materials, particularly in elucidating the intricate electronic states near magnetic phase transitions. Here, this paper delves into the research conducted at the Princeton Plasma Physics Laboratory, which is divided into three phases aimed at overcoming technical hurdles in creating large-bore, high-field HTS magnets for cutting-edge quantum physics research. In Phase 1, we designed, constructed, and tested a compact REBCO solenoidal magnet comprising six double-pancake coils featuring a 41.3-mm inner diameter and a 70.0-mm outer diameter. It adopts a no-insulation approach to ensure electrical and thermal stability. Successful testing in a saturated liquid nitrogen bath confirmed its capability to generate a 0.8-T field at 77 K and 2 T at 65 K, with ongoing integration into liquid helium testing. Building on this experience, Phase 2 involves the design of an HTS insert coil, intended to nest within a 12-T low-temperature superconducting (LTS) outsert to achieve a minimum of 20 T at 4.2 K. The focus of Phase 2 centers on addressing challenges posed by screening-current (SC) effects, particularly the associated stress/strain issues. Employing a numerical model that fully couples the SC and mechanical analysis, we discuss strategies for managing stress to mitigate the effects of SCinduced stress concentrations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental Investigation of Electric Contact Resistance in Spark Plasma Sintering Tooling Setup

An experimental investigation on electric contact resistance in the tooling utilized in spark plasma sintering (SPS) is conducted. Two different SPS regimes are operated without the presence of processed powder to obtain the punch–punch (horizontal) and punch–die (vertical) contact resistance assessments separately. The processing temperature and applied pressure are considered to be the main factors that affect the contact resistance. These effects are analyzed by performing experiments at a maximum temperature of 1600°C with constant heating rate of 100°C/min. The applied pressure is ranging from 20 to 60 MPa and a 1 min holding time‐step is used to ensure stable measurements. It is shown that the contact resistance goes down as the temperature ramps up. An increase in the pressure leads to a decrease in the contact resistance. The mechanisms that cause these variations in the contact resistance are discussed. The dependence of assessed contact resistance of the utilized SPS system on the processing temperature and applied pressure is analytically described based on the regression analysis of the collected experimental data. A finite‐element simulation based on the obtained experimental results evidences that the electric contact resistance dominates the temperature evolution. The obtained results are of significant importance for modeling and optimization of SPS processes.

Wei, Xialu↗

Experimental demonstration of hydraulic jump control in liquid metal channel flow using Lorentz force

In this paper, hydraulic jump control using electromagnetic force in a liquid metal flow is presented. The control methods used give insight into the hydraulic jump behavior in the presence of magnetic fields and electrical currents. Flowing liquid metals is a proposed solution to heat flux challenges posed in fusion reactors, specifically the tokamak. Unfortunately, thin, fast-flowing liquid metal divertor concepts for fusion reactors are susceptible to hydraulic jumps that drastically reduce the liquid metal flow speed, leading to potential problems such as excessive evaporation, unsteady power removal, and possible plasma disruption. Highly electrically conductive flows within the magnetic fields do not exhibit traditional hydraulic jump behavior. There is very little research investigating the use of externally injected electrical currents and magnetic fields to control liquid metal hydraulic jumps. By using externally injected electrical currents and a magnetic field, a Lorentz force (also referred to as j × B force) may be generated to control the liquid metal jump behavior. In this work, a free-surface liquid metal—GaInSn eutectic or “galinstan”—flow through an electrically insulating rectangular duct was investigated. It was shown that applying a Lorentz force has a repeatable and predictable impact on the hydraulic jump, which can be used for liquid metal control within next-generation fusion reactors.

MHD↗

Measured Reduction in Alfvén Wave Energy Propagating through Longitudinal Gradients Scaled to Match Solar Coronal Holes

We have explored the effectiveness of a longitudinal gradient in Alfvén speed in reducing the energy of propagating Alfvén waves under conditions scaled to match solar coronal holes. The experiments were conducted in the Large Plasma Device at the University of California, Los Angeles. Our results show that the energy of the transmitted Alfvén wave decreases as the inhomogeneity parameter, λ/L A, increases. Here, λ is the wavelength of the Alfvén wave and L A is the scale length of the gradient in Alfvén speed. For gradients similar to those in coronal holes, the waves are observed to lose a factor of ≈5 more energy than they do when propagating through a uniform plasma without a gradient. Furthermore, we have carried out experiments and analyses to constrain the cause of wave energy reduction in the gradient. The loss of Alfvén wave energy from mode coupling is unlikely, as we have not detected any other modes. Contrary to theoretical expectations, the reduction in the energy of the transmitted wave is not accompanied by a detectable reflected wave. Nonlinear effects are ruled out because the amplitude of the initial wave is too small and the wave frequency well below the ion cyclotron frequency. Since the total energy must be conserved, it is possible that the lost wave energy is being deposited in the plasma. Further studies are needed to explore where the energy is going.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental Study of Alfvén Wave Reflection from an Alfvén-speed Gradient Relevant to the Solar Coronal Holes

Abstract We report the first experimental detection of a reflected Alfvén wave from an Alfvén-speed gradient under conditions similar to those in coronal holes. The experiments were conducted in the Large Plasma Device at the University of California, Los Angeles. We present the experimentally measured dependence of the coefficient of reflection versus the wave inhomogeneity parameter, i.e., the ratio of the wavelength of the incident wave to the length scale of the gradient. Two-fluid simulations using the Gkeyll code qualitatively agree with and support the experimental findings. Our experimental results support models of wave heating that rely on wave reflection at low heights from a smooth Alfvén-speed gradient to drive turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗

A Comprehensive Review of Latent Space Dynamics Identification Algorithms for Intrusive and Non-Intrusive Reduced-Order-Modeling

Numerical solvers of partial differential equations (PDEs) have been widely employed for simulating physical systems. However, the computational cost remains a major bottleneck in various scientific and engineering applications, which has motivated the development of reduced-order models (ROMs). Recently, machine-learning-based ROMs have gained significant popularity and are promising for addressing some limitations of traditional ROM methods, especially for advection dominated systems. In this chapter, we focus on a particular framework known as Latent Space Dynamics Identification (LaSDI), which transforms the high-fidelity data, governed by a PDE, to simpler and low-dimensional latent-space data, governed by ordinary differential equations (ODEs). These ODEs can be learned and subsequently interpolated to make ROM predictions. Each building block of LaSDI can be easily modulated depending on the application, which makes the LaSDI framework highly flexible. In particular, we present strategies to enforce the laws of thermodynamics into LaSDI models (tLaSDI), enhance robustness in the presence of noise through the weak form (WLaSDI), select high-fidelity training data efficiently through active learning (gLaSDI, GPLaSDI), and quantify the ROM prediction uncertainty through Gaussian processes (GPLaSDI). We demonstrate the performance of different LaSDI approaches on Burgers equation, a non-linear heat conduction problem, and a plasma physics problem, showing that LaSDI algorithms can achieve relative errors of less than a few percent and up to thousands of times speed-ups.

Computational Engineering, Finance, and Science (c↗

Mariner 10 Mercury encounter

Mariner 10's closest approach to Mercury on Mar. 29, 1974 occurred on the dark side of the planet at a range of approximately 700 kilometers. The spacecraft trajectory passed through the shadows of both the sun and earth. Experiments conducted included magnetic fields, plasma and charged particle studies of the solar wind interaction region, television photography, extreme ultraviolet spectroscopy of the atmosphere, the detection of infrared thermal radiation from the surface, and a dual-frequency radio occultation in search of an ionosphere.

Dunne, J. A.↗

Interplanetary magnetic field direction and the configuration of the day side magnetosphere

The direction of the interplanetary magnetic field appears to have a significant effect on the equilibrium size of the day side magnetosphere. The qualitative features of this effect are illustrated here by means of a simple vacuum model that ignores solar wind and ionospheric plasma densities as a first approximation. This idealized model produces earthward displacements of the subsolar magnetopause and equatorward displacements of the polar cusp associated with southward-turning interplanetary fields that are about a factor of 2 greater than observed displacements. The nonzero solar wind plasma pressure and ionospheric conductivity produce large deviations from the simple vacuum configurations but do not change the qualitative conclusions regarding magnetopause and cusp displacements associated with the north-south component of the interplanetary magnetic field.

Hill, T. W.↗

The 15 cm mercury ion thruster research 1975

Doubly charged ion current measurements in the beam of a SERT II thruster are shown to introduce corrections which bring its calculated thrust into close agreement with that measured during flight testing. A theoretical model of doubly charged ion production and loss in mercury electron bombardment thrusters is discussed and is shown to yield doubly-to-singly charged ion density ratios that agree with experimental measurements obtained on a 15 cm diameter thruster over a range of operating conditions. Single cusp magnetic field thruster operation is discussed and measured ion beam profiles, performance data, doubly charged ion densities, and discharge plasma characteristics are presented for a range of operating conditions and thruster geometries. Variations in the characteristics of this thruster are compared to those observed in the divergent field thruster and the cusped field thruster is shown to yield flatter ion beam profiles at about the same discharge power and propellant utilization operating point. An ion optics test program is described and the measured effects of grid system dimensions on ion beamlet half angle and diameter are examined. The effectiveness of hollow cathode startup using a thermionically emitting filament within the cathode is examined over a range of mercury flow rates and compared to results obtained with a high voltage tickler startup technique. Results of cathode plasma property measurement tests conducted within the cathode are presented.

Wilbur, P. J.↗

Atmospheric science facility pallet-only mode space transportation system payload (feasibility study), Volume 1

The economic and technical feasibility is assessed of employing a pallet-only mode for conducting Atmospheric Magnetospheric Plasmas-in-Space experiments. A baseline design incorporating the experiment and instrument descriptions is developed. The prime instruments are packaged into four pallets in a physical and functional manner compatible with the Space Transportation System capabilities and/or constraints and an orbiter seven-day mission timeline. Operational compatibility is verified between the orbiter/payload and supporting facilities. The development status and the schedule requirements applicable to the Atmospheric Science Facility mission are identified. Conclusions and recommendations are presented and discussed.

Source record↗

Magnetohydrodynamic interaction of high-speed streams

Numerical solutions of a magnetohydrodynamic model are carried out to describe the nonlinear interaction of corotating high-speed streams near the solar equatorial plane. Two problems are studied. The first problem is to simulate the evolution of an idealized high-speed stream. Numerical solutions are obtained to represent the variations of flow velocity, magnetic field, plasma density, temperature, and conduction heat flux in the interaction region. They demonstrate that the dynamical interaction and heat conduction process are responsible for the thermal structure of a high-speed stream. The second problem deals with the formation of corotating shock waves near the leading edge of a broad stream resulting from the merging of characteristic curves. Corotating shocks do not necessarily occur in pairs; a reverse shock can be formed without a forward shock nearby.

Whang, Y. C.↗

A long life plasma switch for space applications

The use of a novel plasma switch based on the inverse-pinch mechanism can reduce local current density over spacecraft power system electrodes, thereby minimizing damage to the insulator. The current density involved is 2 orders of magnitude smaller than that of the z-pinched current in a spark-gap switch; local heating is therefore about 4 orders of magnitude less than that to the electrodes of the spark-gap switch. Over 2000 tests of the plasma switch have been conducted for a forward current of more than 1 MA and up to 20 kV holdoff voltage.

Choi, Sang H.↗