Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PAST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Binding and leaching of trace elements in Portland cement pastes

Portland cement contains trace elements originating from the raw materials and the fuels used for cement production. The trace elements are bound to some extent during cement hydration. A small fraction remains dissolved in the pore solution. The dissolved fractions of antimony, barium, chromium, lead, molybdenum and vanadium were quantified in the course of hydration of four different Portland cements. The development of heavy metal concentrations signifies the relevant hydration products for the binding of heavy metals. For chromate and molybdate a substitution for sulfate in ettringite was found. Vanadium and antimony are most likely not bound in ettringite. Barium precipitates as barium sulfate. For lead no clear trends could be observed. Leaching experiments were carried out and the concentrations of the leachates were compared to pore solution concentrations to check if the solubility of the heavy metals is relevant or if the leaching process is controlled by diffusion.

36 MATERIALS SCIENCE↗

Concrete material science: Past, present, and future innovations

Concrete is flying off, but it is simultaneously facing tremendous challenges in terms of environmental impact, financial needs, societal acceptance and image. Based on an historical approach of the science of concrete and reinforced concrete in particular, this paper calls for the exploration of radical changes in three key aspects of concrete use: reinforcement, binder content, and implementation methods. More precisely, it is suggested that, in parallel to the introduction of robotic fabrication methods, digital technologies may be key for the introduction several innovations like (i) rebar-free reinforcement using non-convex granular media; (ii) compression-optimized concrete structures, using topology optimization, architectural geometry, and 3D-printing or origami-patterned formworks; (iii) truly digital concrete through the coupling of massive data collection and deep learning.

36 MATERIALS SCIENCE↗

Role of alcohol-ethylene oxide polymers on the reduction of shrinkage of cement paste

Concrete drying shrinkage is a major practical problem, but it can be ameliorated by means of ''shrinkage-reducing agents'' (SRAs). Water vapor sorption isotherms and low temperature DSC measurements suggest that alcohol-ethylene oxide polymers (AEOPs) with a better hydrophilic-lipophilic (HL-) balance are present in meso-pores in which water molecules evaporate from 75% RH to 40% RH. Short-term drying shrinkage measurements show that the better HL-balanced AEOPs reduce irreversible shrinkage, which occurs mainly from 75% RH to 40% RH during the first drying. Based on the similarity between corresponding RH regions, it is concluded that the better HL balanced AEOP in relevant meso-pores hinders agglomeration of C-S-H during the first desorption to mitigate the irreversible shrinkage and reduce the first drying shrinkage.

36 MATERIALS SCIENCE↗

The interpenetration polymer network in a cement paste–waterborne epoxy system

The formation of the interpenetrating polymer network (IPN) structure within the cement-polymer system has been revealed by experiments from 2 dimensional to 3-dimensional scales. However, the microstructure design and performance prediction of IPN as a function of specific C-S-H/polymer components or ingredients' parameters e.g. water to cement ratios (w/c), polymer to cement ratios (p/c), monomer components, degree of polymerization (DP), etc. is by far not available. Here we developed a mesoscale model for IPN visualization based on the Flory-Huggins interaction theory which was applied to cement science for the first time. All the ingredients in the micro-structure were considered as soluble beads with rational sizes based on their properties obtained by molecular dynamic methods. The interaction parameters of each bead were then determined based on their element ratios and chemical backbones. The model was validated with the waterborne epoxy-cement material (WECM) in which a novel waterborne epoxy resin (WEP) was prepared and impregnated. The verification results on the 2D-3D scale show that the developed model predicts the WECM's IPN structures by rule and line concerning DP, w/c, and p/c in the mixture. The C-S-H beads were progressively scaled in size which alters the C-S-H texture to have completely different dissolution characteristics. Beads of diameter ~6 Å are more unstable and soluble which enable them to form a continuous phase in water or a composite structure with WEP. In contrast, beads with diameters larger than 10 Å have different properties with stronger nucleation effects. The results also suggest the impregnation content of WEP in cement-based material should be limited to 10% vol. to prevent the polymer IPN from decomposing into discrete clusters. The application of Flory-Huggins theory in cement-based composites demonstrates great potential in performance prediction and microstructure design.

36 MATERIALS SCIENCE↗

Piezoelectric response and failure behavior of cement paste under external loading

We study the elastic behavior and rupture mechanism of Calcium Silicate Hydrates (C-S-H) in response to tensile loading. For the three tensile axes, initial defects are spotted in the interlayer regions. However, the crack propagation is rather different depending on the axis of tensile. The cup-and-cone failure surface shows the ductile feature of C-S-H in the x and y directions; while the devastating rupture mode confirms the brittle feature of C-S-H in the z direction. Piezoelectricity was investigated using the charge fluctuation method. The polarization variation in response to small strain was also investigated and piezoelectric coefficients were derived. Furthermore, dependence of elastic and piezoelectric properties over external pressure was analyzed. Results reveal an improvement of the mechanical properties and the ultimate strength especially in the z direction; whereas the non-piezoelectricity remains unchanged despite the rearrangement of atoms induced by the external applied pressure.

36 MATERIALS SCIENCE↗

Resting time effect on the rheological behavior of cement paste in presence of superplasticizer

Rheology has been widely used to describe the flow properties of fresh cement-based suspensions. Nevertheless, the effect of early hydration product formation on rheology, and the effect of shear on breaking of hydration bonds is not fully understood. Therefore, the characterization of the time-dependency of rheology has become necessary to predict precisely the behavior of concrete during placement. In this paper, variations in the resting time in between rheological tests were imposed to evaluate the effects on the development of internal structure of the mixture using different dispersing agents. Increasing resting time in between measurements mainly enhances viscosity, but the magnitude seems strongly dependent on the dispersant used. However, the effect of the employed procedure, as two procedures were evaluated, seems to have a stronger influence on the time-evolution of the rheological properties than changing the resting time in between measurements.

36 MATERIALS SCIENCE↗

Internal curing of cement pastes by means of superabsorbent polymers visualized by neutron tomography

Highlights: • The kinetics of water release from SAPs were studied by neutron tomography. • The time window for internal curing was linked to the water release from SAPs. • The water release links to the SAP effectiveness to mitigate autogenous shrinkage. • One SAP type was effective while another prematurely released its stored water. Superabsorbent polymers (SAPs) are used to counteract self-desiccation in order to mitigate autogenous shrinkage, a problem in cementitious systems with a low water-to-cement ratio. The release kinetics during internal curing are of importance as not all SAP types are able to efficiently mitigate autogenous shrinkage. In this study, neutron tomography is used to study and visualize the water release kinetics over time. Per-voxel analysis of the time-attenuation curve was performed using piecewise-constant functions. Two different SAP types were studied, one being able to mitigate autogenous shrinkage and one quickly releasing its stored water after final setting. The tomography results correspond to autogenous shrinkage measurements and nuclear magnetic resonance tests. The visualization provides information on the time of water release by the SAPs after setting and the time window of internal curing. This opens additional insights towards the application of SAPs in the construction sector and provides information on the mechanism of internal curing.

36 MATERIALS SCIENCE↗

Within-host mathematical models of hepatitis B virus infection: Past, present, and future

Mathematical modeling has been instrumental in enhancing our understanding of the viral dynamics of hepatitis B virus (HBV) infection. We give a primer on HBV infection in humans and a brief overview of the development of within-host mathematical models of HBV infection. In the last decade, models have advanced from considering chronic HBV infections under therapy to the pathogenesis of infection. We also summarize estimates of key viral dynamic parameters that have varied greatly among studies, and show that they impact model predictions. Here, future directions for mathematical modeling of HBV infection are proposed to better understand emerging therapies, the HBV life cycle, predicting cure, and the mechanisms involved in the immune response to HBV.

59 BASIC BIOLOGICAL SCIENCES↗