Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Organic LEDs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Nanoscale Li, Na, and K ion-conducting polyphosphazenes by atomic layer deposition

A key trailblazer in the development of thin-film solid-state electrolytes has been lithium phosphorous oxynitride (LiPON), the success of which has led to recent progress in thin-film ion conductors. Here we compare the structural, electrochemical, and processing parameters between previously published LiPON and NaPON ALD processes with a novel ALD process for the K analogue potassium phosphorous oxynitride (KPON). In each ALD process, alkali tert-butoxides and diethylphosphoramidate are used as precursors. To understand the ALD surface reactions, this work proposes a reaction mechanism determined by in-operando mass spectrometry for the LiPON process as key to understanding the characteristics of the APON (A = Li, Na, K) family. As expected, NaPON and LiPON share similar reaction mechanisms as their structures are strikingly similar. KPON, however, exhibits similar ALD process parameters but the resulting film composition is quite different, showing little nitrogen incorporation and more closely resembling a phosphate glass. Due to the profound difference in structure, KPON likely undergoes an entirely different reaction mechanism. Furthermore, this paper presents a comprehensive summary of ALD ion conducting APON films as well as a perspective that highlights the versatility of ALD chemistries as a tool for the development of novel thin film ion-conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Statistical Design of Experiments Enables Rapid Exploration of Perfluorobutane Sulfonate Degradation

The phase-out of long-chain PFAS has led to the proliferation of highly recalcitrant short-chain analogs, and mineralization technologies for these short-chain PFAS are needed to mitigate their deleterious effects on environmental and human health. In this study, we utilize a statistical design of experiments, specifically, response surface methodology, to rapidly evaluate the electrochemical degradation of the short-chain PFAS, perfluorobutane sulfonate (PFBS). We evaluate the impacts of the three primary electrochemical parameters (concentration of PFBS, concentration of supporting electrolyte, and applied current) over multiple orders of magnitude on the three primary reaction outcomes of electrochemical PFBS degradation (incomplete PFBS decomposition, complete PFBS mineralization as fluorine, and anodic energy consumption). Our results correspond with literature and clearly identify the well-known tradeoff between energy consumption and complete mineralization. Intriguingly, partial PFBS decomposition and energy consumption demonstrate nonlinear dependencies in the current/supporting electrolyte concentration space and the current/PFBS concentration space, respectively. These findings highlight the utility of the response surface methodology model to efficiently interrogate a large parameter space, identifying both common results and less-obvious interactions between electrochemical parameters and their influences on reaction outcomes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Arsenite oxyanions affect CeO 2 nanoparticle dissolution and colloidal stability

While highly reactive cerium oxide nanoparticles (CeO 2 NPs) are widely used in industry, their transport in aquatic systems is not well understood. To fill this knowledge gap, the interactions of CeO 2 NPs with arsenite (As 3+ ), a toxic metalloid and potential co-present contaminant, were investigated with respect to CeO 2 NP colloidal stability, dissolution, and surface redox reactions. Arsenite showed distinctive effects at different concentrations, with a high As 3+ concentration (10 –4 M) inducing 90% of CeO 2 NPs to settle from solution after 8 hours, while lower As 3+ concentrations (10 –5 or 10 –6 M) led to only 20% of CeO 2 NPs settling. The dissolution of NPs was most significant in the 10 –5 M As 3+ system owing to a lesser extent of aggregation, exposing more CeO 2 surface for dissolution. In the three As 3+ concentration systems, >97% of aqueous arsenic remained as As 3+ over 6 hours. On the NP surface, adsorbed As III was oxidized to As V , resulting in 58–70% of the adsorbed arsenic remaining as As III . Simultaneously Ce IV was reduced to Ce III , increasing Ce III on the CeO 2 NP surface from 17% (without arsenite) to 21–25% (with arsenite). Further mechanistic analyses revealed that the adsorption of arsenite was the main contributor to neutralizing the CeO 2 NP surface potential, enhancing particle sedimentation. These findings suggest that the fate and transport of CeO 2 NPs in our experimental systems are strongly affected by arsenite concentration and its adsorption on NPs. Here, the results also highlight the importance of the interplay between NP aggregation, oxidation, and dissolution in predicting the behaviors of CeO 2 NPs and associated toxic elements in aquatic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomistic Explanation of the Dramatically Improved Oxygen Reduction Reaction of Jagged Platinum Nanowires, 50 Times Better than Pt

Pt is the best catalyst for the oxygen reduction reactions (ORRs), but it is far too slow. Huang and co-workers showed that dealloying 5 nm Ni 7 Pt 3 nanowires (NW) led to 2 nm pure Pt jagged NW (J-PtNW) with ORRs 50 times faster than Pt/C. They suggested that the undercoordinated surface Pt atoms, mechanical strain, and high electrochemically active surface area (ECSA) are the main contributors. We report here multiscale atomic simulations that further explain this remarkably accelerated ORR activity from an atomistic perspective. We used the ReaxFF reactive force field to convert the 5 nm Ni 7 Pt 3 NW to the jagged 2 nm NW. We applied quantum mechanics to find that 14.4% of the surface sites are barrierless for O ads + H 2 O ads → 2OH ads , the rate-determining step (RDS). The reason is that the concave nature of many surface sites pushes the OH bond of the H 2 O ads close to the O ads , leading to a dramatically reduced barrier. We used this observation to predict the performance improvement of the J-PtNW relative to Pt (111). Assuming every surface site reacts independently with this predicted rate leads to a 212-fold enhancement at 298.15 K, compared to 50 times experimentally. The atomic structures of the active sites provide insights for designing high-performance electrocatalysts for ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dual Emission Bands of a 2D Perovskite Single Crystal with Charge Transfer State Characteristics

Several hybrid halide 2D-perovskite species emit light with an emergent and controversial broadband emission Stokes-shifted down from the narrow band emission. This work uncovers the sub- and above-bandgap emission and absorption characteristics of PEA 2 PbI 4 prepared with gap states introduced during single crystal growth. Here, gap states led to coexistent intrinsic and heterostructured electronic frameworks that are selectively accessible with ultraviolet (UV) and infrared (IR) light, respectively, resulting in the phenomenon of photoluminescence (PL) switching from narrowband green to broadband red. Electron-energy dependent cathodoluminescence shows a relative increase in the broadband red PL intensity as the electron penetration depth increases from 30 nm to 2 μm, confirming the heterostructured framework is formed in the bulk of the crystal. Excitation–emission power slope of 2.5 and up-conversion pump transient absorption (TA) spectra suggest that the IR up-conversion excitation with red photoluminescence, peaked at 655 nm, is a multiphoton process occurring in the heterostructured framework through a nonlinear optical response. The energetic pathways toward the dual emission bands are revealed by pump–probe transient absorption spectroscopy, showing energetically broad gap states with high sensitivity to an IR pump are upconverted and subsequently quickly relax from high to low energy levels within 4 ps. Furthermore, the up-conversion red PL demonstrates a linear polarization with magnetic field effects, thus affirming that the band-like heterostructured framework is crystallographically aligned with characteristics of spatially extended charge-transfer states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Light-induced electron spin qubit coherences in the purple bacteria reaction center protein

Photosynthetic reaction center proteins (RCs) provide ideal model systems for studying quantum entanglement between multiple spins, a quantum mechanical phenomenon wherein the properties of the entangled particles become inherently correlated. Following light-generated sequential electron transfer, RCs generate spin-correlated radical pairs (SCRPs), also referred to as entangled spin qubit (radical) pairs (SQPs). Understanding and controlling coherence mechanisms in SCRP/SQPs is important for realizing practical uses of electron spin qubits in quantum sensing applications. The bacterial RC (bRC) provides an experimental system for exploring quantum effects in the SCRP P 865 + Q A − , where P 865 , a special pair of bacteriochlorophylls, is the primary donor, and Q A is the primary quinone acceptor. In this study, we focus on understanding how local molecular environments and isotopic substitution, particularly deuteration, influence spin coherence times (T M ). Using high-frequency electron paramagnetic resonance (EPR) spectroscopy, we observed that the local environment surrounding P 865 and Q A plays a significant role in determining T M . Our findings show that while deuteration led to a modest increase in T M , particularly at low temperatures, but the effect was substantially smaller than predicted by classical nuclear spin diffusion alone. This result is in contrast to our previous study of the photosystem I (PSI) RC, where no increase in T M was observed upon deuteration. Theoretical modeling identified several methyl groups at key distances from the spin centers of both bRC and PSI, and methyl group tunneling at low temperatures has been previously suggested as a mechanism for enhanced spin decoherence. Additionally, our study revealed a strong dependence of spin coherence on the orientation of the external magnetic field, highlighting the influence of the protein microenvironment on spin dynamics. In conclusion, these results offer new insights for optimizing coherence times in quantum system design for quantum information science and sensing applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Reimagining the $e_g$ 1 Electronic State in Oxygen Evolution Catalysis: Oxidation-State-Modulated Superlattices as a New Type of Heterostructure for Maximizing Catalysis

We report that the discovery of solid-phase, inexpensive transition-metal-based water oxidation catalysts is a central goal for renewable energy, and has led to a general consensus that a partially populated metal e g d-electronic state is desirable, leading to favorable catalysis for certain elements in specific oxidation states. In manganese systems, the key species is manganese(III), whose high-spin d 4 electronic configuration places an unpaired electron in the e g orbital, which is postulated to contribute to electronic and structural features that support catalysis. Based on density functional theory calculations, it is predicted that electron transfer would be facilitated by a catalyst with alternating low- and high-Mn III -content sheets, which positions neighboring band edges in closer energetic proximity. The preparation of such catalysts is demonstrated for the first time and it is shown that the catalytic activity is maximized in these systems over more uniform, but more Mn III -rich systems. The best catalyst possesses alternating high-and low-average oxidation state sheets with interlayer Cs + ions, and has an overpotential of 450 mV at 10 mA, which represents an improvement of 250 mV over the best unmodified synthetic potassium birnessites. Using scanning tunneling spectroscopy, bandgap modulations consistent with the theoretically predicted band edge shifts are detected.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Photo-Swing CO2 Capture Using a Branched Polyethylenimine As Sorbents and TiN Light Absorber

Using branched polyethylenimine as the sorbent material for dilute CO2 capture, a photo-swing method is demonstrated in an industrially relevant support architecture using titanium nitride (TiN) nanosized light absorbers coupled with low-power LEDs with irradiances up to 420 mW cm-2. The photo-swing desorption process is applied to dry and humid streams of 400 ppm CO2 diluted in N2. Consistent with known sorption mechanisms for aminopolymers, humid CO2 streams increased the CO2 uptake, in our case by ~30%. The photo-swing CO2 capture desorbed ~83% and ~100% CO2 compared to thermally-driven desorption over the same period for a dry and humid CO2 stream, respectively. The photo-swing CO2 capture exhibits robust performance over >90 cycles without significant signs of photo(thermal) induced sorbent degradation. This work lays the groundwork for photo-swing DAC technology as a scalable, energy-efficient solution for CO2 capture, well-suited for modular systems in remote locations utilizing intermittent renewable energy sources.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Application and assessment of deep learning for the generation of potential NMDA receptor antagonists

Uncompetitive antagonists of the N-methyl D-aspartate receptor (NMDAR) have demonstrated therapeutic benefit in the treatment of neurological diseases such as Parkinson's and Alzheimer's, but some also cause dissociative effects that have led to the synthesis of illicit drugs. The ability to generate NMDAR antagonists in silico is therefore desirable for both new medication development and preempting and identifying new designer drugs. Recently, generative deep learning models have been applied to de novo drug design as a means to expand the amount of chemical space that can be explored for potential drug-like compounds. In this study, we assess the application of a generative model to the NMDAR to achieve two primary objectives: (i) the creation and release of a comprehensive library of experimentally validated NMDAR phencyclidine (PCP) site antagonists to assist the drug discovery community and (ii) an analysis of both the advantages conferred by applying such generative artificial intelligence models to drug design and the current limitations of the approach. We apply, and provide source code for, a variety of ligand- and structure-based assessment techniques used in standard drug discovery analyses to the deep learning-generated compounds. Overall, we present twelve candidate antagonists that are not available in existing chemical databases to provide an example of what this type of workflow can achieve, though synthesis and experimental validation of these compounds are still required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Application of Quantum Computing to Biochemical Systems: A Look to the Future

Chemistry is considered as one of the more promising applications to science of near-term quantum computing. Recent work in transitioning classical algorithms to a quantum computer has led to great strides in improving quantum algorithms and illustrating their quantum advantage. Because of the limitations of near-term quantum computers, the most effective strategies split the work over classical and quantum computers. There is a proven set of methods in computational chemistry and materials physics that has used this same idea of splitting a complex physical system into parts that are treated at different levels of theory to obtain solutions for the complete physical system for which a brute force solution with a single method is not feasible. These methods are variously known as embedding, multi-scale, and fragment techniques and methods. We review these methods and then propose the embedding approach as a method for describing complex biochemical systems, with the parts not only treated with different levels of theory, but computed with hybrid classical and quantum algorithms. Such strategies are critical if one wants to expand the focus to biochemical molecules that contain active regions that cannot be properly explained with traditional algorithms on classical computers. While we do not solve this problem here, we provide an overview of where the field is going to enable such problems to be tackled in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sorption and oxidation of Co(II) at the surface of birnessite: Impacts of aqueous Mn(II)

The sorption of aqueous Mn(II) (1 mM) and Co(II) (50 and 200 μM) onto hexagonal birnessite (0.1 g L –1 ) was studied under anoxic conditions at pH 6.5 and 7.5 in binary and ternary experiments using batch kinetic experiments and XRD, ATR-FTIR, and Co K-edge EXAFS analyses. In the binary systems, sorption of Co(II) was accompanied by partial oxidation to Co(III) yielding a mixture of corner-sharing Co(II) and edge-sharing Co(III) complexes at both pH values, while Mn(II)-birnessite interaction resulted in coordination of Mn(II/III) at layer vacancy sites at pH 6.5, and led to reductive transformation of birnessite into feitknechtite at pH 7.5. In the ternary systems, strong mutual interferences between Co(II) and Mn(II) co-sorbates reduced the rate and extent of sorption relative to the binary experiments. The introduction of Mn(II) aq into the high-Co systems (200 μM) halted the slow sorption of Co(II) that was attributed to the incorporation of Co(III) into layer vacancies, while Co(II) aq prevented Mn(II)-driven transformation of birnessite into feitknechtite at pH 7.5. In the low-Co system (50 μM), reductive transformation of birnessite by Mn(II) aq at pH 7.5 produced Co(II)-substituted feitknechtite, a conversion that was accompanied by reduction of sorbed Co(III) to Co(II) which was partially released to solution. The strong effects of co-sorption are attributed to the similarity in sorption mechanisms of Co(II) and Mn(II), which both sorb as a mixture of di- and trivalent species. Finally, the results of this work demonstrate that aqueous Mn(II) may significantly affect the reactivity of phyllomanganate sorbents towards dissolved Co(II), and therefore impact the speciation and solubility of this trace metal in anoxic and suboxic geochemical environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Quantum chemically calculated Abraham parameters for quantifying and predicting polymer hydrophobicity

The leakage and accumulation of plastic in the environment is a significant and growing problem with numerous detrimental impacts and has led to a push toward the design and development of more environmentally benign materials. To this end, we have developed a quantum chemistry-based model for predicting the mobility of polymer materials from molecular structure. Hydrophobicity is used as a surrogate for mobility given that hydrophobic interactions drive much of the partitioning of contaminants in and out of various environmentally relevant compartments. To model polymer hydrophobicity, we adjusted a previously developed Quantum Chemically Calculated Abraham Parameter model to calculate Abraham parameters of small molecules from molecular structure information. The resulting model predicted the octanol-water partition coefficient (K OW ) of polymer repeating units with a root mean square error (RMSE) of 0.48 (log scale). Additionally, the hydrophobicity of high molecular weight polymer materials was captured through solubility parameters and Nile red staining experiments from the literature and predicted with RMSEs of 1.21 (J/cc) 0.5 and 3.42 nm, respectively. Finally, to test the environmental applicability of the model, the relative adsorption capacity of three polymers was predicted and used to unify sorption isotherms across multiple sorbates and polymer sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Beyond green with synthetic chlorophylls – Connecting structural features with spectral properties

The distinct features of chlorophylls in photosynthesis have led to the formation of numerous derivatives for applications encompassing solar energy conversion, molecular photonics, photodynamic therapy, and molecular imaging. Synthetic chlorins created de novo and bearing a geminal dimethyl group in the reduced ring have proved invaluable for fundamental studies. Four decades of research have led to accumulation of tabulated spectra for > 400 such synthetic chlorins with distinct structural frameworks (17-oxochlorins, 13 1 -oxophorbines, chlorinimides) and substituents (alkyl, aryl, ethynyl, phenylethynyl, acetyl, formyl) located at specific (meso, β) positions. In this review, spectral traces (324 absorption, 247 fluorescence) are assembled along with photophysical data including the molar absorption coefficient (ε), fluorescence quantum yield (Φ f ) and singlet excited-state lifetime (τ s ). The review uses the accumulated spectral data derived from chlorins all containing a uniform molecular scaffold to (1) highlight the effects of molecular structure on spectral features, and (2) identify trends including how ε, Φ f and τ s vary with wavelength and other features. Use of a common geminal-dimethyl-substituted chlorin scaffold – beginning with no substituents, to one substituent at designated sites, and to 2 or more substituents – provides a systematic Aufbau approach for understanding the absorption spectra of chlorins on a path to and beyond the native chlorophylls. Finally, the review provides insights concerning the rational design of potent analogues of Nature’s preeminent red-region absorbers for potential utilization in diverse applications and is aimed at multiple audiences: those interested in spectral properties, tetrapyrrole photophysics, and the molecular design of new chromophores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Developing Microalgae-Based Non-Isocyanate Polyurethane Foam Materials

Polyurethane is a versatile material with a wide range of applications in the production of foam products such as car seats, mattresses, footwear, insulation foam, and more. The traditional process for producing polyurethane foam involves the fast reaction of isocyanate with water, which generates CO2 as a blowing agent. However, the use of isocyanate has raised concerns due to its potential for causing allergic reactions and aspiration symptoms. This has led to increased regulation of isocyanate, leading to a growing interest in developing alternatives. Non-isocyanate polyurethane (NIPU) has emerged as a promising alternative to traditional toxic PU production. The most promising approach for producing NIPU is the aminolysis of cyclic carbonate with diamine. The NIPU produced through this process has a polyhydroxyurethane structure, which is similar to traditional PU chemistry. We have demonstrated that microalgal oil is a favored feedstock, as it can provide high reactivity for industrial applications. However, the NIPU production process does not generate gas, and a blowing agent is required to achieve the desired foam structure. One of the challenges in producing NIPU foam is to match the bubble formation and curing rates. We have developed a novel approach to producing NIPU foam that utilizes carbamate as a bifunctional blowing and crosslinking agent. We have used vegetable oil and microalgal oil as feedstocks to produce various NIPU for characterization. The development of microalgal NIPU provides an exciting opportunity for reducing the environmental impact of foam production and improving the safety of the materials used in the production process. The production of value-added NIPU foam can also drive down the cost of microalgal biorefinery, advancing the commercialization of microalgal biofuel.

algae↗
DOE OSTI2020

Revealing Antiferroelectric Switching and Ferroelectric Wakeup in Hafnia by Advanced Piezoresponse Force Microscopy

Hafnium oxide (HfO 2 )-based ferroelectrics offer remarkable promise for memory and logic devices in view of their compatibility with traditional silicon complementary metal oxide semiconductor (CMOS) technology, high switchable polarization, good endurance, and thickness scalability. These factors have led to a steep rise in the level of research on HfO 2 over the past number of years. While measurements on capacitors are promising for understanding macroscopic effects, many open questions regarding the emergence of ferroelectricity and electric field cycling behaviors remain. Continued progress requires information regarding the nanoscale ferroelectric behaviors on the bare surface (i.e., without encapsulation), which is notably absent. To overcome this barrier, we have applied complementary modes of piezoresponse force microscopy with the goal of directly and quantitatively sensing nanoscale ferroelectric behaviors in bare HfO 2 thin films. Our results on 8 nm Si-doped HfO 2 reveal nanoscale domains of local remnant polarization states exhibiting a weak piezoelectric coupling (deff) in the range 0.6–1.5 pm/V. While we observed localized enhancement of deff during progressive stressing of the bare HfO 2 thin film, we did not detect stable polarization switching which is a prerequisite of ferroelectric switching. We find that this result could be explained using polarization switching spectroscopy which revealed antiferroelectric-like switching in the form of pinched hysteresis loops as well as increasing remnant response with repeated cycling. As such, our results offer a promising route for material scientists who want to explore the nanoscale origins of antiferroelectricity and ferroelectric wakeup in HfO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic Insights into Copper(I) and Copper(II) Cation Exchange Reactions in CdSe Nanoplatelets

In this study, we investigated the synthesis of copper selenide nanoplatelets (NPLs) through a cation exchange reaction (CER) in 5-monolayer-thick CdSe NPLs using Cu(I) and Cu(II) precursors. We discovered that the exposure of CdSe NPLs to a Cu(I) precursor led to the transformation of NPLs into Cu 2-x Se while maintaining their nanoplatelet morphology. The replacement of Cd(II) with Cu(I) prevailed over the formation of doped structures. In the case of the Cu(II) precursor, we observed that Cu(II) was first reduced to Cu(I) before being intercalated into the host lattice, resulting in the synthesis of Cu 2-x Se, similar to CER with Cu(I) precursors but without preservation of the initial morphology of NPLs. Interestingly, the presence of oxygen was found to facilitate the cation exchange processes in CdSe NPLs, whereas a nitrogen atmosphere suppressed the CER. Further, despite the similar ionic sizes of Cu(I) and Cu(II), the substitution of Cd(II) with Cu(II) was found to be challenging, possibly due to the involvement of redox processes resulting in the significant deterioration of initial CdSe NPLs. We demonstrate that CER can achieve near-complete substitution of cadmium atoms with monovalent copper at room temperature. Understanding the processes involved in CERs is crucial for engineering more complex structures, such as high-entropy nanoparticles involving cation exchange with different oxidation states and development of material synthesis using machine learning and artificial intelligence approaches.

2D nanoplatelets↗
DOE OSTI2026

Surface-Functionalized, Two-Dimensional Polymer Electrochromic Layers as Ultrafast, Multi-State Infrared Optical Gates

Electrochromic devices have widespread application potential, but the currently available switching speeds limit broad real-world implementation of this technology. Here, we report surface-engineered two-dimensional polymers with ionophilic pores that offer unprecedented switching speeds in solid-state, two-terminal, electrochromic devices. In particular, we demonstrate that a crystalline donor–acceptor 2DP functionalized with ethylene glycol oligomers exhibits multistate infrared absorption that is 4× faster (t c = 320 ms) with 3× coloration efficiency (491 cm 2 C –1 ) compared to an alkyl functionalized 2DP constructed from the same chromophores. The functionalized nanoporous surfaces enable rapid switching in these materials under either oxidative or reductive conditions, allowing us to access a range of robust, stable optical responses in a single electrochromic layer. These attributes led us to leverage surface-functionalized 2DPs as multistate infrared logic gates. Collectively, this work demonstrates that surface engineering of nanoporous crystalline lattices is a promising approach to co-optimize the electronic and ionic conductivities required to achieve rapidly switchable electrochromic layers. Beyond speed and efficiency, the demonstration of multistate infrared characteristics shows that electrochromic frameworks are useful in integrated optoelectronic circuits. This positions surface-engineered 2DPs as improved electrochromic coatings and a new material platform for photonic information processing and adaptive devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Trace Chemical Detection Using Intercalated MXenes as a Signal Enhancing Substrate in Optical Probes

MXenes are 2D materials composed of layered transition metal nitrides or carbides. These materials are synthesized by HF exfoliation from MAX phases (Ti{sub 3}AlC{sub 2}). The 2D nanomaterial was synthesized by the removal of the 'A' element, resulting in a Mxene product (Ti{sub 3}C{sub 2}). MXenes have the general formula M{sub n+1}X{sub n}T{sub x}, where M is an early transition metal, X is Carbon and/or Nitrogen, and T accounts for surface terminated functional groups such as Fluoride, hydroxyl, and oxygen. These materials have very unique properties, similar to graphene, that allows them to be applied in a variety of trace detection techniques including surface-enhanced Raman spectroscopy (SERS). MXenes have also been demonstrated to selectively uptake uranyl ion, UO{sub 2}{sup 2+}. If this property can be combined with SERS or fluorescence detection, it may be possible to use MXenes as the basis for an alternative method to kinetic phosphorescence analysis (KPA) for trace uranyl measurements. Objectives: To confirm that MXene Nano materials are suitable substrates for SERS and sensor development by enhancing Raman signaling. To determine if certain MXene preparation methods yield materials that are more suitable for trace sensing methods. To determine uranyl uptake properties of these MXene materials and test them for analytical signals. Sample Preparation: Preparation of Ti{sub 3}C{sub 2}MXene (at FSU). MXenes were prepared by etching Al from Ti{sub 3}AlC{sub 2} (MAX phase)material. Two etching techniques yield different MXene products: LiF/HCl: Milder reaction, larger MXene flakes. HF: Harsher reaction, smaller flakes, larger layer separation. Products washed to remove etchant, vacuum filtered, and dried. Dried MXene flakes are air-stable. Film preparation for sensor testing (at SRNL): Suspend powder in diH{sub 2}O, purge with Ar, sonicate for 30 min. Centrifuge and collect supernate with suspended particles. Observed LiF-etched Mxene yielded a higher density of particles and darker collected solution. Drop-cast (4 ml) supernate onto slides and dried with Ar. For Rhodamine B (RhB) testing, drop-cast 4 ml drops onto Mxene spots and dried with Ar. Scanning Electron Microscopy conditions: 10 kV Beam energy, high vacuum; Working distance of 8 mm; beam penetration depth appx. 4 microns, beam spot size appx. 2 nanometers. Results: Detection of aluminum correlates with bright spots on image. Presence of aluminum shows that LiF/HCl etching was less thorough than HF etching. Trace Cl detection in LiF images suggests incomplete rinsing. HF has smaller feature size, more layer structure, and increased homogeneity, consistent with expectations. Macroscopic Raman spectroscopy measurements: 532 nm excitation, ∼50 mW with a ∼100 micron spot size (InPhotonics RPB probe). Kaiser Optical Holospec f/1.8 spectrometer with cooled (-60 deg.C) Andor iDus OE420 CCD. LiF 1x supernate showed good signal for trace measurements of Rhodamine B. HF and 1/4x LiF supernates showed little Mxene or Rhodamine B signal. Low deposition densities led to excess background signal from glass slides. For LiF film, response is linear with Rhodamine B concentration over range tested. Will retest with Raman microscope (∼1 micron spot size) to characterize SERS of more dilute LiF and HF etched Mxenes. Conclusions: The LiF etched material was more suitable for macroscopic SERS measurements because it was more concentrated, resulting in a thicker film than the HF etched Mxene and diluted LiF sample. However, the other materials may give greater SERS enhancements, which we hope to determine from measurements with the Raman microscope. From characterization with SEM we concluded that the HF etched Mxene is more uniform/homogenous and has smaller particle size than the LiF etched Mxene. There is still aluminum present in both samples indicating that etching wasn't complete, but the removal of the aluminum was more efficient in the HF method. Path Forward: Observe SERS with Raman microscopy, to obtain better signals for the more diluted samples and be able to compare enhancement effects for the different MXenes. Characterize uranyl sorption into MXene films and test Raman and fluorescence signals. Revisit the etching conditions to improve removal of aluminum. FSU and SRNL will continue to collaborate to create and characterize different Mxene materials and test their usefulness for sensor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗