SEARCH · Engineering Papers

Results for “Operator approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS2009

Wrap-Around Out-the-Window Sensor Fusion System

The Advanced Cockpit Evaluation System (ACES) includes communication, computing, and display subsystems, mounted in a van, that synthesize out-the-window views to approximate the views of the outside world as it would be seen from the cockpit of a crewed spacecraft, aircraft, or remote control of a ground vehicle or UAV (unmanned aerial vehicle). The system includes five flat-panel display units arranged approximately in a semicircle around an operator, like cockpit windows. The scene displayed on each panel represents the view through the corresponding cockpit window. Each display unit is driven by a personal computer equipped with a video-capture card that accepts live input from any of a variety of sensors (typically, visible and/or infrared video cameras). Software running in the computers blends the live video images with synthetic images that could be generated, for example, from heads-up-display outputs, waypoints, corridors, or from satellite photographs of the same geographic region. Data from a Global Positioning System receiver and an inertial navigation system aboard the remote vehicle are used by the ACES software to keep the synthetic and live views in registration. If the live image were to fail, the synthetic scenes could still be displayed to maintain situational awareness.

Fox, Jeffrey↗

NASA NTRS2007

600-GHz Electronically Tunable Vector Measurement System

A compact, high-dynamic-range, electronically tunable vector measurement system that operates in the frequency range from approximately 560 to approximately 635 GHz has been developed as a prototype of vector measurement systems that would be suitable for use in nearly-real-time active submillimeter-wave imaging. As used here, 'vector measurement system" signifies an instrumentation system that applies a radio-frequency (RF) excitation to an object of interest and measures the resulting amplitude and phase response, relative to either the applied excitatory signal or another reference signal related in a known way to applied excitatory signal.

Dengler, Robert↗

NASA NTRS2009

A State-Space Approach to Optimal Level-Crossing Prediction for Linear Gaussian Processes

In many complex engineered systems, the ability to give an alarm prior to impending critical events is of great importance. These critical events may have varying degrees of severity, and in fact they may occur during normal system operation. In this article, we investigate approximations to theoretically optimal methods of designing alarm systems for the prediction of level-crossings by a zero-mean stationary linear dynamic system driven by Gaussian noise. An optimal alarm system is designed to elicit the fewest false alarms for a fixed detection probability. This work introduces the use of Kalman filtering in tandem with the optimal level-crossing problem. It is shown that there is a negligible loss in overall accuracy when using approximations to the theoretically optimal predictor, at the advantage of greatly reduced computational complexity. I

Martin, Rodney Alexander↗

NASA NTRS2010

Lidar Measurements of Methane and Applications for Aircraft and Spacecraft

Atmospheric methane levels have remained relatively constant over the last decade around 1.78 parts per million (ppm) but observations since 2007 show that levels may be increasing. This trend may be caused by increased fossil fuel production, rice farming, livestock and landfills, but the underlying causes are quite uncertain. One hypothesis is that reservoirs of carbon trapped in the permafrost regions of northern Canada, Europe, and Siberia thaw as global temperatures rise and are releasing increasing amounts of methane. Another hypothesis points to increased production of methane by microbes as the permafrost warms. Currently most observations of greenhouse gases are limited to in-situ (surface and tower sites) and limited airborne in-situ measurements. Space column density measurements are starting to become available from the GOSAT mission. Although methane survives for a shorter time in the atmosphere than CO2, its impact on climate change per molecule is about 23 times than that of CO2. Accurate global observations of several greenhouse gases, including methane, are urgently needed in order to better understand climate change processes and to reduce the uncertainty in the carbon budget. Differential absorption lidar is a well-established technique to measure atmospheric gases, and methane has optical absorption bands near 1.65,2.2,3.4 and 7.8 micron. The near infrared overtones lines of CH4 near 1650 nm are relatively free of interference from other species. There are absorption lines near 1651 nm which are both temperature insensitive and have line strengths well suited for lidar measurements. We have developed a laser and demonstrated lidar measurements of CH4 using lines in this band. Our laser uses a narrow linewidth 1064 nm laser pulse passing through a nonlinear crystal. We generate the tunable laser signals near 1651 nm by using the optical parametric amplification (OPA) process. Inside the crystal the 1064 nm beam overlaps with an injection seed laser near 1651 nm from a wavelength tunable diode laser. Incident photons from the pump laser pulse are converted into two photons, with one at the wavelength of the injection seeder. The wavelength of the OPA output is tuned via the wavelength of diode laser. Our laser is tunable, operates near 1651 nm and generates approximately 4 uJ/pulse at 6 KHz. We vary the emission wavelengths within this band by tuning the diode laser's wavelength. We have used this OPA transmitter to make measurements of CH4 at various pressures in a gas cell and over open outdoor horizontal paths. We have measured the lineshape of methane in a 6 cm long cell at various energy levels with this transmitter, with excellent agreement with the lineshape calculated by HITRAN. We have also measured the absorption lineshape of atmospheric methane in an open 3 km outdoor path. The agreement between the measurements and HITRAN, for 1746 ppb and 760 Torr was quite good. We have also made pulsed two wavelength lidar measurements of methane line absorption in the column to a tower at 1.5 km range. These used on- and off-line wavelengths of 1650.957 nm, and 1651.072 nm, and a 20 cm diameter receiver telescope with an infrared PMT detector. The absorption of the on-line photons was 30%. The methane column absorption was estimated via HITRAN, and was in good agreement with the expected methane absorption for a concentration of 1750 ppm. Finally we have calculated the measurement performance of an airborne methane lidar using this transmitter, as well as the energy and telescope scaling needed for a lidar for space. These results, and more details of our experiments will be described in the presentation.

Riris, Haris↗

NASA NTRS2011

On-Orbit Measurements of the ISS Atmosphere by the Vehicle Cabin Atmosphere Monitor

We report on trace gas and major atmospheric constituents results obtained by the Vehicle Cabin Atmosphere Monitor (VCAM) during operations aboard the International Space Station (ISS). VCAM is an autonomous environmental monitor based on a miniature gas chromatograph/mass spectrometer. It was flown to the ISS on shuttle mission STS-131 and commenced operations on 6/10/10. VCAM provides measurements of ppb-to-ppm levels of volatile trace-gas constituents, and of the atmospheric major constituents (nitrogen, oxygen, argon, and carbon dioxide) in a space vehicle or station. It is designed to operate autonomously and maintenance-free, approximately once per day, with a self-contained gas supply sufficient for a one-year lifetime. VCAM is designed to detect and identify 90% of the target compounds at their 180-day Spacecraft Maximum Allowable Concentration levels.

cabin atmosphere↗

NASA NTRS2015

Key Recent Scientific Results from the Opportunity Rover's Exploration of Endeavour Crater, Mars

The Opportunity Rover is currently in its 11th year of operations, exploring the rim of the approximately 22 km wide Noachian-age Endeavour Crater. Opportunity spent its 5th winter season in Cook Haven, a gentle swale along Murray Ridge. Two small rocks serendipitously overturned by rover wheel motions show evidence for aqueous precipitation of sulfates, and interaction with a strong oxidant (e.g., O2) to form a thin, high valence state Mn oxide coating. After the winter, Opportunity headed south to Cape Tribulation and explored Shoemaker formation impact breccias, finding numerous Ca-sulfate veins cutting across outcrops. A key target for Opportunity's measurements has been the Spirit of Saint Louis crater (SoSL), which is approximately 25 m wide, oval in plan view, shallow, flat-floored, and has a slightly raised rim. SoSL crater is surrounded by an apron of bright, polygonally-shaped outcrops and is superimposed on a gentle swale in Cape Tribulation. Rocks in a thin reddish zone on the rim are enriched in hematite, Si, and Ge, and depleted in Fe, relative to surrounding rocks. Apron rocks include an outcrop also enriched in Si and Ge, and slightly depleted in Fe. In general rocks in the crater and apron have elevated S relative to Shoemaker formation breccias, tracking values observed in the Cook Haven and the Hueytown (fracture running perpendicular to Cape Tribulation) outcrops. SoSL crater lies just to the west of Marathon Valley, a key target for exploration by Opportunity because five separate CRISM observations indicate the presence of Fe/Mg smectites on the upper valley floor. Opportunity data show that low relief, relatively bright polygonal outcrops dominate the valley floor where not covered by scree and soil shed from surrounding walls. Initial reconnaissance shows that the outcrops are breccias with compositions similar to the typical SoSL crater apron and floor rocks, although only the very upper portion of the valley has been explored as of August 2015. Pervasive but modest aqueous alteration of Endeavour's rim is implied by the combination of CRISM and Opportunity data, providing insight into early aqueous processes dominated in this location by relatively low water to rock ratios, and at least in part associated with enhanced fluid flow along fractures.

Arvidson, R. E.↗

NASA NTRS2021

Sensitivity of Low Tropospheric Arctic Temperatures to Assimilation of AIRS Cloud-Cleared Radiances: Impact on Mid-Latitude Waves

In this work, it is shown that the prediction of individual mid-latitude waves in a global forecast framework is sensitive to the initialization over the Arctic and may benefit from the assimilation of cloud-cleared radiances (CCRs) from the Atmospheric Infrared Sounder (AIRS), particularly in partially cloudy regions with active dynamics. This study shows that the assimilation of AIRS CCRs over the Arctic Ocean, providing more information than clear-sky radiances from areas affected by broken low-level stratus clouds, produces slightly cooler low-level temperatures and lower mid-tropospheric height through hydrostatic adjustment. In areas that are data void, as observed by clear-sky radiances, and dynamically active, the assimilation of CCRs provides valuable information that can improve the representation of individual baroclinic waves and their subsequent forecasts. The modifications induced by the assimilation of AIRS CCRs over the Arctic Ocean slightly modifies the geopotential height gradients between the Arctic and the mid-latitudes, leading to potential improvements in the forecast of individual baroclinic waves as is shown through a case study. The observing system experiment (OSE) is performed with the NASA Goddard Earth Observing System (GEOS) data assimilation and forecast system during boreal autumn 2014. AIRS CCRs are thinned to approximately one quarter the density of operationally assimilated AIRS radiances, consistent with their higher information content. Global, 6-hourly analyses are produced from 1 September to 10 November 2014 and 7-day forecasts are initialized at 0000 UTC daily. Since the CCR methodology is widely applicable, these findings are also relevant to other infrared sensors.

Cloud-clearing↗

DOE OSTI2021

Design and Testing of a Water-Cooled Rotating Detonation Combustor at Elevated Operating Pressures - Abstract

This is an extended abstract being submitted for consideration that briefly describes the material that will be included in the final paper. This study will detail the design and testing of a water-cooled Rotating Detonation Combustor (RDC) that permits operation for extended periods of time ensuring that the device has reach a stable operating temperature. Extended run times also provides an opportunity to consider transient behaviors that occur as a result of altering the operating conditions such as equivalence ratio. The experimental setup is also unique in that it consists of a ducted exhaust with a downstream high-temperature valve that can control the pre-combustion pressure in the RDC independent of the combustor annulus and exit geometry. This paper will examine the results from the extended operation of the water-cooled RDC over a range of both transient and steady state equivalence ratios (0.5 - 1.0), pre-combustion operating pressures (0 - 207 kPa), mass flow rates (0.42 – 0.5 kg/sec) and air inlet throat area to combustor channel area ratios (0.09 – 0.32). All tests were performed while operating on hydrogen in air at a nominal air inlet temperature of 340 – 350 K. Limited data obtained at an elevated inlet air temperature of 480 K will also be discussed. Results suggest that under certain conditions the operating mode of the detonation wave can vary as it approaches a stable operating temperature. For the RDC tested, a stable operating temperature is not achieved until approximately 8-10 seconds of run time.

Ferguson, Donald↗

DOE OSTI2026

Thermal Performance of Neutron Sensor Qualification Device

The neutron sensor qualification device was developed to provide a temperature-controlled environment for neutron sensors and dosimetry, enabling irradiation in a neutron field at the Armed Forces Radiobiology Research Institute (AFRRI) TRIGA reactor facility. The device, constructed from low-activation and low neutron cross-section materials, features a modular tube furnace design with three independently controlled heating zones for controlling axial temperature distribution. Laboratory testing validated the device's thermal performance, including uniform temperature distribution with less than 6°C variation across the central region, a steady-state operational temperature of 350°C achieved in approximately 3 hours, and a cooling time constant of 3.5 hours. External surface temperatures remained safe for handling, with the surrounding aluminum structure remaining at ambient conditions. The results confirm the device’s suitability for neutron sensor qualification experiments, with potential for future operation at higher temperatures and further optimization of performance.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

NASA NTRS1995

Low-frequency variations in the atmospheric branch of the global hydrological cycle

The annual variation of the hydrological cycle is illustrated in terms of hemispheric-mean hydrological variables for the Northern and Southern Hemispheres, while the intraseasonal variations of the global hydrological cycle are illustrated with mean values over two hemispheres that form an east-west partition of the globe. This partition is defined by the 60 deg E-120 deg W great circle and was chosen so that the mean precipitation difference and the divergent water vapor transport between the two hemispheres was maximized. Two years (1979-80) of daily precipitation estimates from the Goddard Laboratory for Atmospheres an 14 years (1979-92) of upper-air data generated by the Global Data Assimilation System at the National Meteorological Center are used in making quantitative estimates of the annual and intraseasonal variations in the global hydrological cycle. The annual variations in hemispheric-mean precipitation (P-circumflex) and water vapor flux divergence (del(vector differential operator) dot Q-circumflex) for the Northern and Southern Hemispheres are comparable with amplitudes of about 0.5 approximately 0.7 mm/day. Both (P-circumflex) and (del(vector differential operator) dot Q-circumflex) vary annually in a coherent way in each hemisphere so that water vapor diverges from the winter hemisphere, where (P-circumflex) reaches its minimum, to the summer hemisphere, where (P-circumflex) attains its maximum. In fact, the hemispheric-mean divergence of water vapor flux changes sign during the annual cycle. Intraseasonal variations of hemispheric-mean precipitation mean P-tilde, evaporation mean E-tilde, and water vapor flux divergence mean del (vector differential operator) dot Q-tilde in the two hemisphres in the east-west direction are comparable with amplitudes of about 0.1 approximately 0.2 mm/day, although amplitudes in some cases exceed 0.3 mm/day. Hemispheric-mean precipitation mean P-tilde varies coherently in opposite phase for the two hemispheres, while mean del (vector differential operator) dot Q-tilde varies so that water vapor diverges from the hemisphere of maximum mean P-tilde to the hemisphere to the hemisphere of minimum mean P-tilde. Intraseasonal variations of mean P-tilde, mean E-tilde, and mean del (vector differential oprator) dot Q-tilde are in accord with the eastward propagation of the intraseasonal global divergent circulation.

Chen, Tsing-Chang↗

NASA NTRS1976

The role of fracture mechanics in the design of fuel tanks in space vehicles

With special reference to design of fuel tanks in space vehicles, the principles of fracture mechanics are reviewed. An approximate but extremely simple relationship is derived among the operating stress level, the length of crack, and the number of cycles of failure. Any one of the variables can be computed approximately from the knowledge of the other two, if the loading schedule (mission of the tank) is not greatly altered. Two sample examples illustrating the procedures of determining the allowable safe operating stress corresponding to a set of assumed loading schedule are included. The selection of sample examples is limited by the relatively meager available data on the candidate material for various stress ratios in the cycling.

Denton, S. J.↗

NASA NTRS1989

Absorbing boundary conditions for second-order hyperbolic equations

A uniform approach to construct absorbing artificial boundary conditions for second-order linear hyperbolic equations is proposed. The nonlocal boundary condition is given by a pseudodifferential operator that annihilates travelling waves. It is obtained through the dispersion relation of the differential equation by requiring that the initial-boundary value problem admits the wave solutions travelling in one direction only. Local approximation of this global boundary condition yields an nth-order differential operator. It is shown that the best approximations must be in the canonical forms which can be factorized into first-order operators. These boundary conditions are perfectly absorbing for wave packets propagating at certain group velocities. A hierarchy of absorbing boundary conditions is derived for transonic small perturbation equations of unsteady flows. These examples illustrate that the absorbing boundary conditions are easy to derive, and the effectiveness is demonstrated by the numerical experiments.

Jiang, Hong↗

NASA NTRS1990

Absorbing boundary conditions for second-order hyperbolic equations

Jiang, Hong↗

NASA NTRS1989

Numerical studies of identification in nonlinear distributed parameter systems

An abstract approximation framework and convergence theory for the identification of first and second order nonlinear distributed parameter systems developed previously by the authors and reported on in detail elsewhere are summarized and discussed. The theory is based upon results for systems whose dynamics can be described by monotone operators in Hilbert space and an abstract approximation theorem for the resulting nonlinear evolution system. The application of the theory together with numerical evidence demonstrating the feasibility of the general approach are discussed in the context of the identification of a first order quasi-linear parabolic model for one dimensional heat conduction/mass transport and the identification of a nonlinear dissipation mechanism (i.e., damping) in a second order one dimensional wave equation. Computational and implementational considerations, in particular, with regard to supercomputing, are addressed.

Banks, H. T.↗

DOE OSTI2023

Noise-Resilient and Reduced Depth Approximate Adders for NISQ Quantum Computing

The "Noisy intermediate-scale quantum" NISQ machine era primarily focuses on mitigating noise, controlling errors, and executing high-fidelity operations, hence requiring shallow circuit depth and noise robustness. Approximate computing is a novel computing paradigm that produces imprecise results by relaxing the need for fully precise output for error-tolerant applications including multimedia, data mining, and image processing. We investigate how approximate computing can improve the noise resilience of quantum adder circuits in NISQ quantum computing. We propose five designs of approximate quantum adders to reduce depth while making them noise-resilient, in which three designs are with carryout, while two are without carryout. We have used novel design approaches that include approximating the Sum only from the inputs (pass-through designs) and having zero depth, as they need no quantum gates. The second design style uses a single CNOT gate to approximate the SUM with a constant depth of O(1). We performed our experimentation on IBM Qiskit on noise models including thermal, depolarizing, amplitude damping, phase damping, and bitflip: (i) Compared to exact quantum ripple carry adder without carryout the proposed approximate adders without carryout have improved fidelity ranging from 8.34% to 219.22%, and (ii) Compared to exact quantum ripple carry adder with carryout the proposed approximate adders with carryout have improved fidelity ranging from 8.23% to 371%. Further, the proposed approximate quantum adders are evaluated in terms of various error metrics.

Gaur, Bhaskar↗

NASA NTRS1990

An approximation theory for the identification of linear thermoelastic systems

An abstract approximation framework and convergence theory for the identification of thermoelastic systems is developed. Starting from an abstract operator formulation consisting of a coupled second order hyperbolic equation of elasticity and first order parabolic equation for heat conduction, well-posedness is established using linear semigroup theory in Hilbert space, and a class of parameter estimation problems is then defined involving mild solutions. The approximation framework is based upon generic Galerkin approximation of the mild solutions, and convergence of solutions of the resulting sequence of approximating finite dimensional parameter identification problems to a solution of the original infinite dimensional inverse problem is established using approximation results for operator semigroups. An example involving the basic equations of one dimensional linear thermoelasticity and a linear spline based scheme are discussed. Numerical results indicate how the approach might be used in a study of damping mechanisms in flexible structures.

Rosen, I. G.↗

NASA NTRS1999

A Versatile Planetary Radio Science Microreceiver

We have developed a low-power. programmable radio "microreceiver" that combines the functionality of two science instruments: a Relative Ionospheric Opacity Meter (riometer) and a swept-frequency, VTF/HF radio spectrometer. The radio receiver, calibration noise source, data acquisition and processing, and command and control functions are all contained on a single circuit board. This design is suitable for miniaturizing as a complete flight instrument. Several of the subsystems were implemented in a field-programmable gate array (FPGA), including the receiver detector, the control logic, and the data acquisition and processing blocks. Considerable efforts were made to reduce the power consumption of the instrument, and eliminate or minimize RF noise and spurious emissions generated by the receiver's digital circuitry. A prototype instrument was deployed at McMurdo Station, Antarctica, and operated in parallel with a traditional riometer instrument for approximately three weeks. The attached paper (accepted for publication by Radio Science) describes in detail the microreceiver theory of operation, performance specifications and test results.

Fry, Craig D.↗

DOE OSTI2023

The five-point bootstrap

We study five-point correlation functions of scalar operators in d-dimensional conformal field theories. We develop a new approach to computing the five-point conformal blocks for exchanged primary operators of arbitrary spin by introducing a generalization of radial coordinates, using an appropriate ansatz, and perturbatively solving two quadratic Casimir differential equations. We then study five-point correlators 〈σσϵσσ〉 in the critical 3d Ising model. We truncate the operator product expansions (OPEs) in the correlator by including a finite number of primary operators with conformal dimension below a cutoff ∆ ⩽ ∆ cutoff . We then compute several OPE coefficients involving ϵ and two spinning operators by demanding that the truncated correlator approximately satisfies the crossing relation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗