Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical approximations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Numerical Descriptions of Cosmic-Ray Transport

The behavior of energetic particles in the solar system is described by a well known Fokker-Planck equation. Although analytic methods yield insight into the nature of its solutions, especially in the diffusion regime, calculations that go beyond diffusion are very complicated. The reliability of these calculations is of concern, because numerical methods are notorious for their errors and artifacts. The well known Milne problem of classical transport theory was analyzed with the aid of three different numerical methods. These are: (1) The method of eigenfunctions in which the distribution function is approximated by a sum of eigenfunctions of the scattering operator, (2) Numerical solutions of a finite difference aquation; and (3) Direct simulation of the scattering and streaming of individual particles with the aid of Monte Carlo methods.

Earl, J. A.↗
NASA NTRS1982

Numerical solution of transonic wing flow fields

A fast, fully implicit, approximate factorization algorithm designed to solve the conservative full-potential equation is used to compute lifting-wing flow fields with embedded transonic flow. The computer program (TWING - transonic wing analysis) uses an elliptic-solver numerical grid-generation routine and is capable of analyzing arbitrary wing geometries with sweep, twist, taper, and section variation. Computed flowfield results for several wing geometries are presented; they demonstrate substantial improvement in convergence speed relative to the FL028 computer code.

Holst, T. L.↗
DOE OSTI2023

A Probabilistic Scheme for Semilinear Nonlocal Diffusion Equations with Volume Constraints

This work presents a probabilistic scheme for solving semilinear nonlocal diffusion equations with volume constraints and integrable kernels. The nonlocal model of interest is defined by a time-dependent semilinear partial integro-differential equation (PIDE), in which the integro-differential operator consists of both local convection-diffusion and nonlocal diffusion operators. Here, our numerical scheme is based on the direct approximation of the nonlinear Feynman–Kac formula that establishes a link between nonlinear PIDEs and stochastic differential equations. The exploitation of the Feynman–Kac representation avoids solving dense linear systems arising from nonlocal operators. Compared with existing stochastic approaches, our method can achieve first-order convergence after balancing the temporal and spatial discretization errors, which is a significant improvement of existing probabilistic/stochastic methods for nonlocal diffusion problems. Error analysis of our numerical scheme is established. The effectiveness of our approach is shown in two numerical examples. The first example considers a three-dimensional nonlocal diffusion equation to numerically verify the error analysis results. The second example presents a physics problem motivated by the study of heat transport in magnetically confined fusion plasmas.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1987

Inverse Compton scattering of ambient radiation by a cold relativistic jet - A source of beamed, polarized continuum in blazars?

A general formalism is developed for computing the intensity and polarization of unpolarized radiation scattered by a group of electrons with a specified distribution of momenta. The case of isotropic incident radiation with a power-law spectrum is addressed, and the 'head-on' approximation is developed to describe the nearly unidirectional character of the incident radiation in the electron rest frame. The formalism is implemented numerically, verifying the validity of the 'head-on' approximation and illustrating the polarization and intensity properties of radiation scattered by jets with different electron momentum distribution. The results are placed in an astrophysical setting, determining the optical depths and kinetic energies required for the scattered radiation to dominate over the isotropic component in blazars. It is argued that Comptonization of unbeamed AGN radiation by a relativistic jet can account for the polarization and the overall spectral shape of the IR-optical continuum in blazars.

Begelman, Mitchell C.↗
NASA NTRS1986

Mass fractionation during transonic escape and implications for loss of water from Mars and Venus

Hydrodynamic escape of hydrogen from a planetary atmosphere can remove heavier gases as well as hydrogen, provided that the escape rate is sufficiently large. Analytic approximations for the degree of mass fractionation of a trace species during hydrodynamic escape are compared with accurate numerical solutions for the case of transonic outflow. The analytic approximations are most accurate when the ratio of molecular weights of the heavier and lighter constituents is large so that nonlinear terms in the momentum equation for the heavy constituent become small. The simplest analytic formula is readily generalized to the case where a heavy constituent is also a major species. Application of the generalized formula to hypothetical episodes of hydrodynamic escape from Venus and Mars suggests that both hydrogen and oxygen could have escaped; thus, substantial quantities of water may have been lost without the need to oxidize large amounts of the crust.

Zahnle, Kevin J.↗
NASA NTRS1992

The Sobolev approximation for line formation with partial frequency redistribution

Attention is given to the formation of a spectral line in a uniformly expanding infinite medium in the Sobolev approximation, with emphasis on the various mechanisms for frequency redistribution. Numerical and analytic solutions of the transfer equation are presented of a number of redistribution functions and their approximations, including type I and type II partial redistribution, coherent scattering and complete redistribution, and the Fokker-Planck and uncorrelated approximation to the R sub II function. The solutions for the mean intensity are shown to depend very much on the type of redistribution mechanism, while for the frequency-weighted mean intensity, which enters the rate equations, this dependence is weak. It is inferred that use of Sobolev escape probabilities based on complete redistribution can be an adequate approximation for many calculations for which only the radiative excitation rates are needed.

Hummer, D. G.↗
NASA NTRS1994

Hot gas in the cold dark matter scenario: X-ray clusters from a high-resolution numerical simulation

A new, three-dimensional, shock-capturing hydrodynamic code is utilized to determine the distribution of hot gas in a standard cold dark matter (CDM) model of the universe. Periodic boundary conditions are assumed: a box with size 85 h(exp -1) Mpc having cell size 0.31 h(exp -1) Mpc is followed in a simulation with 270(exp 3) = 10(exp 7.3) cells. Adopting standard parameters determined from COBE and light-element nucleosynthesis, sigma(sub 8) = 1.05, omega(sub b) = 0.06, and assuming h = 0.5, we find the X-ray-emitting clusters and compute the luminosity function at several wavelengths, the temperature distribution, and estimated sizes, as well as the evolution of these quantities with redshift. We find that most of the total X-ray emissivity in our box originates in a relatively small number of identifiable clusters which occupy approximately 10(exp -3) of the box volume. This standard CDM model, normalized to COBE, produces approximately 5 times too much emission from clusters having L(sub x) is greater than 10(exp 43) ergs/s, a not-unexpected result. If all other parameters were unchanged, we would expect adequate agreement for sigma(sub 8) = 0.6. This provides a new and independent argument for lower small-scale power than standard CDM at the 8 h(exp -1) Mpc scale. The background radiation field at 1 keV due to clusters in this model is approximately one-third of the observed background, which, after correction for numerical effects, again indicates approximately 5 times too much emission and the appropriateness of sigma(sub 8) = 0.6. If we have used the observed ratio of gas to total mass in clusters, rather than basing the mean density on light-element nucleosynthesis, then the computed luminosity of each cluster would have increased still further, by a factor of approximately 10. The number density of clusters increases to z approximately 1, but the luminosity per typical cluster decreases, with the result that evolution in the number density of bright clusters is moderate in this redshift range, showing a broad peak near z = 0.7, and then a rapid decline above redshift z = 3. Detailed computations of the luminosity functions in the range L(sub x) = 10(exp 40) - 10(exp 44) ergs/s in various energy bands are presented for both cluster central regions and total luminosities to be used in comparison with ROSAT and other observational data sets. The quantitative results found disagree significantly with those found by other investigators using semianalytic techniques. We find little dependence of core radius on cluster luminosity and a dependence of temperature on luminosity given by log kT(sub x) = A + B log L(sub x), which is slightly steeper (B = 0.38) than is indicated by observations. Computed temperatures are somewhat higher than observed, as expected, in that COBE-normalized CDM has too much power on the relevant scales. A modest average temperature gradient is found, with temperatures dropping to 90% of central values at 0.4 h(exp -1) Mpc and 70% of central values at 0.9 h(exp -1) Mpc. Examining the ratio of gas to total mass in the clusters normalized to Omega(sub B) h(exp 2) = 0.015, and comparing with observations, we conclude, in agreement with White (1991), that the cluster observations argue for an open universe.

Kang, Hyesung↗
NASA NTRS2000

Uncertainty Analysis of Decomposing Polyurethane Foam

Sensitivity/uncertainty analyses are necessary to determine where to allocate resources for improved predictions in support of our nation's nuclear safety mission. Yet, sensitivity/uncertainty analyses are not commonly performed on complex combustion models because the calculations are time consuming, CPU intensive, nontrivial exercises that can lead to deceptive results. To illustrate these ideas, a variety of sensitivity/uncertainty analyses were used to determine the uncertainty associated with thermal decomposition of polyurethane foam exposed to high radiative flux boundary conditions. The polyurethane used in this study is a rigid closed-cell foam used as an encapsulant. Related polyurethane binders such as Estane are used in many energetic materials of interest to the JANNAF community. The complex, finite element foam decomposition model used in this study has 25 input parameters that include chemistry, polymer structure, and thermophysical properties. The response variable was selected as the steady-state decomposition front velocity calculated as the derivative of the decomposition front location versus time. An analytical mean value sensitivity/uncertainty (MV) analysis was used to determine the standard deviation by taking numerical derivatives of the response variable with respect to each of the 25 input parameters. Since the response variable is also a derivative, the standard deviation was essentially determined from a second derivative that was extremely sensitive to numerical noise. To minimize the numerical noise, 50-micrometer element dimensions and approximately 1-msec time steps were required to obtain stable uncertainty results. As an alternative method to determine the uncertainty and sensitivity in the decomposition front velocity, surrogate response surfaces were generated for use with a constrained Latin Hypercube Sampling (LHS) technique. Two surrogate response surfaces were investigated: 1) a linear surrogate response surface (LIN) and 2) a quadratic response surface (QUAD). The LHS techniques do not require derivatives of the response variable and are subsequently relatively insensitive to numerical noise. To compare the LIN and QUAD methods to the MV method, a direct LHS analysis (DLHS) was performed using the full grid and timestep resolved finite element model. The surrogate response models (LIN and QUAD) are shown to give acceptable values of the mean and standard deviation when compared to the fully converged DLHS model.

Hobbs, Michael L.↗
NASA NTRS1997

Validation of an Accurate Three-Dimensional Helical Slow-Wave Circuit Model

The helical slow-wave circuit embodies a helical coil of rectangular tape supported in a metal barrel by dielectric support rods. Although the helix slow-wave circuit remains the mainstay of the traveling-wave tube (TWT) industry because of its exceptionally wide bandwidth, a full helical circuit, without significant dimensional approximations, has not been successfully modeled until now. Numerous attempts have been made to analyze the helical slow-wave circuit so that the performance could be accurately predicted without actually building it, but because of its complex geometry, many geometrical approximations became necessary rendering the previous models inaccurate. In the course of this research it has been demonstrated that using the simulation code, MAFIA, the helical structure can be modeled with actual tape width and thickness, dielectric support rod geometry and materials. To demonstrate the accuracy of the MAFIA model, the cold-test parameters including dispersion, on-axis interaction impedance and attenuation have been calculated for several helical TWT slow-wave circuits with a variety of support rod geometries including rectangular and T-shaped rods, as well as various support rod materials including isotropic, anisotropic and partially metal coated dielectrics. Compared with experimentally measured results, the agreement is excellent. With the accuracy of the MAFIA helical model validated, the code was used to investigate several conventional geometric approximations in an attempt to obtain the most computationally efficient model. Several simplifications were made to a standard model including replacing the helical tape with filaments, and replacing rectangular support rods with shapes conforming to the cylindrical coordinate system with effective permittivity. The approximate models are compared with the standard model in terms of cold-test characteristics and computational time. The model was also used to determine the sensitivity of various circuit parameters including typical manufacturing dimensional tolerances and support rod permittivity. By varying the circuit parameters of an accurate model using MAFIA, these sensitivities can be computed for manufacturing concerns, and design optimization previous to fabrication, thus eliminating the need for costly experimental iterations. Several variations were made to a standard helical circuit using MAFIA to investigate the effect that variations on helical tape and support rod width, metallized loading height and support rod permittivity, have on TWT cold-test characteristics.

Kory, Carol L.↗
NASA NTRS2006

Numerical Modeling of Flow Control in a Boundary-Layer-Ingesting Offset Inlet Diffuser at Transonic Mach Numbers

This paper will investigate the validation of the NASA developed, Reynolds-averaged Navier-Stokes (RANS) flow solver, OVERFLOW, for a boundary-layer-ingesting (BLI) offset (S-shaped) inlet in transonic flow with passive and active flow control devices as well as a baseline case. Numerical simulations are compared to wind tunnel results of a BLI inlet experiment conducted at the NASA Langley 0.3-Meter Transonic Cryogenic Tunnel. Comparisons of inlet flow distortion, pressure recovery, and inlet wall pressures are performed. The numerical simulations are compared to the BLI inlet data at a free-stream Mach number of 0.85 and a Reynolds number of approximately 2 million based on the fanface diameter. The numerical simulations with and without tunnel walls are performed, quantifying tunnel wall effects on the BLI inlet flow. A comparison is made between the numerical simulations and the BLI inlet experiment for the baseline and VG vane cases at various inlet mass flow rates. A comparison is also made to a BLI inlet jet configuration for varying actuator mass flow rates at a fixed inlet mass flow rate. Overall, the numerical simulations were able to predict the baseline circumferential flow distortion, DPCP avg, very well within the designed operating range of the BLI inlet. A comparison of the average total pressure recovery showed that the simulations were able to predict the trends but had a negative 0.01 offset when compared to the experimental levels. Numerical simulations of the baseline inlet flow also showed good agreement with the experimental inlet centerline surface pressures. The vane case showed that the CFD predicted the correct trends in the circumferential distortion levels for varying inlet mass flow but had a distortion level that was nearly twice as large as the experiment. Comparison to circumferential distortion measurements for a 15 deg clocked 40 probe rake indicated that the circumferential distortion levels are very sensitive to the symmetry of the flow and that a misalignment of the vanes in the experiment could have resulted in this difference. The numerical simulations of the BLI inlet with jets showed good agreement with the circumferential inlet distortion levels for a range of jet actuator mass flow ratios at a fixed inlet mass flow rate. The CFD simulations for the jet case also predicted an average total pressure recovery offset that was 0.01 lower than the experiment as was seen in the baseline. Comparisons of the flow features for the jet cases revealed that the CFD predicted a much larger vortex at the engine fan-face when compare to the experiment.

Allan, Brian G.↗
NASA NTRS1990

A hybrid perturbation-Galerkin technique for partial differential equations

A two-step hybrid perturbation-Galerkin technique for improving the usefulness of perturbation solutions to partial differential equations which contain a parameter is presented and discussed. In the first step of the method, the leading terms in the asymptotic expansion(s) of the solution about one or more values of the perturbation parameter are obtained using standard perturbation methods. In the second step, the perturbation functions obtained in the first step are used as trial functions in a Bubnov-Galerkin approximation. This semi-analytical, semi-numerical hybrid technique appears to overcome some of the drawbacks of the perturbation and Galerkin methods when they are applied by themselves, while combining some of the good features of each. The technique is illustrated first by a simple example. It is then applied to the problem of determining the flow of a slightly compressible fluid past a circular cylinder and to the problem of determining the shape of a free surface due to a sink above the surface. Solutions obtained by the hybrid method are compared with other approximate solutions, and its possible application to certain problems associated with domain decomposition is discussed.

Geer, James F.↗
DOE OSTI2020

Computational modeling of charge hopping dynamics along a disordered one-dimensional wire with energy gradients in quantum environments

This computational study investigates the effects of energy gradients on charge hopping dynamics along a one-dimensional chain of discrete sites coupled to quantum bath, which is modeled at the level of Pauli master equation (PME). This study also assesses the performance of different approximations for the hopping rates. Three different methods for solving the PME, a fourth order Runge–Kutta method, numerical diagonalization of the rate matrix followed by analytic propagation, and kinetic Monte Carlo simulation method, are tested and confirmed to produce virtually identical values of time dependent mean square displacement, diffusion constant, and mobility. Five different rate expressions, exact numerical evaluation of Fermi’s Golden Rule (FGR) rate, stationary phase interpolation (SPI) approximation, semiclassical approximation, classical Marcus rate, and Miller–Abrahams rate, are tested to help understand the effects of approximations in representing quantum environments in the presence of energy gradients. The results based on direct numerical evaluation of FGR rate exhibit transition from diffusive to non-diffusive behavior with the increase in the gradient and show that the charge transport in the quantum bath is more sensitive to the magnitude of the gradient and the disorder than in the classical bath. Among all the four approximations for the hopping rates, the SPI approximation is confirmed to work best overall. A comparison of two different methods to calculate the mobility identifies drift motion of the population distribution as the major source of non-diffusive behavior and provides more reliable information on the contribution of quantum bath.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Resistive wave dissipation on magnetic inhomogeneities Normal modes and phase mixing

Numerical solutions of the linearized, resistive MHD equations indicate the presence of two characteristic forms of wave decay on magnetic inhomogeneities. Solutions for relatively long-wavelength disturbances and large values of the resistivity have the behavior of decaying normal modes. In the opposite limits, phase mixing becomes important, with the eventual build-up of large spatial gradients in which the resistive terms dominate. This composite behavior is shown to be conceptually consistent with analytic results, which predict that the complete solution consists of the sum of collective and noncollective contributions. The numerical simulations go beyond analytic theory by defining where each contribution prevails and computing wave decay when phase mixing is effective. The dispersion relation in the normal-mode regime is also determined analytically, with some approximations, and is in good agreement with the numerical solution. The decay time of the normal modes varies with Lundquist number at S1/6, while the phase-mixed decay time scales as S1/3.

Steinolfson, R. S.↗
NASA NTRS1971

Approximate optimal atmospheric entry trajectories.

For a reentry glider, approximate solutions are found in closed form for the problem of maximizing a function of the terminal velocity, altitude, flight-path angle and heading angle subject to, at most, three terminal nonlinear constraints. The results given here extend the previous results in two important ways: (1) the second-order approximation of the entry dynamics of Loh is used instead of the first-order approximation of Allen and Eggers. This approximation is found to compare extremely well with an exact numerical optimal path. (2) A three-dimensional optimization problem is solved which includes Loh's second-order approximation where the roll angle as well as the lift coefficient are determined subject to constraints which include the terminal heading angle. Furthermore, closed-form solutions can also be obtained subject to in-flight constraints on the lift coefficient and roll angle.

Speyer, J. L.↗
NASA NTRS1975

A three-dimensional viscoelastic model of a strike slip fault

An analytic approximation to the Green's function for the displacements due to a strike slip point source in an elastic layer over a viscoelastic half-space is developed. This approximate Green's function is useful because it can be analytically integrated over the fault surface. Comparison with a numerical integration of the exact solution integral indicates that the approximation is quite good. The approximate Green's function is integrated analytically to obtain the displacements due to a finite rectangular strike slip fault in an elastic layer over a viscoelastic half-space. Ground displacements and angle changes from a model survey net are computed to illustrate the viscoelastic relaxation which follows a fracture in the elastic region.

Rundle, J. B.↗
NASA NTRS1977

A piecewise linear approximation scheme for hereditary optimal control problems

An approximation scheme based on 'piecewise linear' approximations of L2 spaces is employed to formulate a numerical method for solving quadratic optimal control problems governed by linear retarded functional differential equations. This piecewise linear method is an extension of the so called averaging technique. It is shown that the Riccati equation for the linear approximation is solved by simple transformation of the averaging solution. Thus, the computational requirements are essentially the same. Numerical results are given.

Cliff, E. M.↗
NASA NTRS1978

Numerical solutions of a control problem governed by functional differential equations

A numerical procedure is proposed for solving optimal control problems governed by linear retarded functional differential equations. The procedure is based on the idea of 'averaging approximations', due to Banks and Burns (1975). For illustration, numerical results generated on an IBM 370/158 computer, which demonstrate the rapid convergence of the method are presented.

Banks, H. T.↗