Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Module scale model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

High-contrast Thermal Infrared Spectroscopy with ALES: The 3–4 μm Spectrum of κ Andromedae b

We present the first L-band (2.8–4.1 μm) spectroscopy of κ Andromedae b, a ~20 M Jup companion orbiting at 1" projected separation from its B9-type stellar host. We combine our Large Binocular Telescope (LBT) Arizona Lenslets for Exoplanet Spectroscopy (ALES) integral field spectrograph data with measurements from other instruments to analyze the atmosphere and physical characteristics of κ And b. We report a discrepancy of ~20% (2σ) in the L' flux of κ And b when comparing to previously published values. We add an additional L' constraint using an unpublished imaging data set collected in 2013 using the LBT Interferometer/LMIRCam, the instrument in which the ALES module has been built. The LMIRCam measurement is consistent with the ALES measurement, both suggesting a fainter L-band scaling than previous studies. The data, assuming the flux scaling measured by ALES and LMIRCam imaging, are well fit by an L3-type brown dwarf. Atmospheric model fits to measurements spanning 0.9–4.8 μm reveal some tension with the predictions of evolutionary models, but the proper choice of cloud parameters can provide some relief. In particular, models with clouds extending to very low pressures composed of grains ≤1 μm appear to be necessary. If the brighter L' photometry is accurate, there is a hint that subsolar metallicity may be required.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantification of Uncertainties and Correlations in Criticality Experiments With SCALE

Uncertainties in benchmark keff values due to uncertainties in individual components, such as geometry and material compositions, are rigorously quantified and documented in evaluations provided in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (IHECSBE). Correlations between the uncertainties may affect not only the overall uncertainty for a series of benchmarks but also the magnitude of computational biases and bias uncertainties quantified by validation methods. The impact of the correlations in experimental uncertainties is especially important in the use of advanced validation methods such as Generalized Linear Least Squares (GLLS), as implemented in the SCALE TSURFER code. In a recent study, it was demonstrated that biases computed with GLLS procedures vary by as much as 75%, depending on the selection of the experimental uncertainty correlation value. of the >4000 benchmarks documented in the IHECSBE; experimental correlation data are only available in the DICE database tool for ~60 benchmarks. Additional data are available in DICE to identify the potential for correlations between evaluations, but the values of correlations are not quantified. The new Sampler module of SCALE provides stochastic capabilities to quantify uncertainties and correlations in keff or any other measured value for one or more benchmark experiments due to uncertainties in individual sources of uncertainty, such as geometry and material composition. The values for individual parameters in the input model are randomly modified within the reported uncertainty, and a distribution function and a series of perturbed keff values are obtained. Where sufficient samples are made, the distribution of the perturbed keff values is used to determine the uncertainty in the keff due to uncertainties in the input parameters. In cases where the same uncertainty parameters influence multiple experiments, such as where the same fissile solution or fuel rods are used for many critical measurements, the simultaneous perturbation of an uncertain parameter for multiple cases provides the correlation in keff uncertainties between the different configurations. The parametric uncertainty capabilities of Sampler for a single system are demonstrated for a benchmark exercise from the Organization for Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA) Working Party on Nuclear Criticality Safety (WPNCS) Expert Group on Uncertainty Analysis for Criticality Safety Assessment (UACSA) Phase II benchmark. Sampler is further applied to quantify correlations among benchmarks from a series of highly enriched uranium (HEU) solution (SOL) thermal spectrum (THERM) systems, through the analysis of the 10 cases from HEU-SOL-THERM-001 from the IHECSBE.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Angular-planar CMB power spectrum

Gaussianity and statistical isotropy of the Universe are modern cosmology's minimal set of hypotheses. In this work we introduce a new statistical test to detect observational deviations from this minimal set. By defining the temperature correlation function over the whole celestial sphere, we are able to independently quantify both angular and planar dependence (modulations) of the CMB temperature power spectrum over different slices of this sphere. Given that planar dependence leads to further modulations of the usual angular power spectrum C{sub l}, this test can potentially reveal richer structures in the morphology of the primordial temperature field. We have also constructed an unbiased estimator for this angular-planar power spectrum which naturally generalizes the estimator for the usual C{sub l}'s. With the help of a chi-square analysis, we have used this estimator to search for observational deviations of statistical isotropy in WMAP's 5 year release data set (ILC5), where we found only slight anomalies on the angular scales l=7 and l=8. Since this angular-planar statistic is model-independent, it is ideal to employ in searches of statistical anisotropy (e.g., contaminations from the galactic plane) and to characterize non-Gaussianities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA's High-Resolution GEOS Forecasting and Reanalysis Products: A Unified Tool from Local to Global Scales

NASA's GMAO produces high-resolution global forecasts for weather, aerosols, and air quality. The NASA Global Earth Observing System (GEOS) model has been expanded to provide global near-real-time 5-day forecasts of atmospheric chemical composition at unprecedented horizontal resolution of 0.25 degrees (~25 km), freely available to the public. This composition forecast system (GEOS-CF) combines the operational GEOS weather forecasting model with the state-of-the-science GEOS-Chem chemistry module to provide detailed analysis of a wide range of air pollutants such as ozone, carbon monoxide, nitrogen oxides, and fine particulate matter (PM2.5). GEOS-CF also assimilated satellite observations into the system for improved representation of weather and smoke. The assimilation system is currently being expanded to include chemically reactive trace gases. While the main focus of this new product is on tropospheric air quality information, the GEOS-Chem chemistry model used in this system includes the unified tropospheric stratospheric chemistry mechanism for improved forecasts of total column ozone during anomalous dynamical and chemical events. I will discuss current capabilities of the GEOS Constituent Data Assimilation System (CoDAS) to improve atmospheric composition modeling and possible future directions for GEOS-CF and reanalysis products. In addition, I will show how machine learning techniques can be used to correct for sub-grid-scale variability, which further improves model estimates at a given observation site.

Co-DAS↗

Electrochemical mechanisms of leakage‐current in photovoltaic modules

Abstract This paper analyzes the mechanisms and pathways for leakage current flow observed in Si photovoltaic modules subjected to high temperature and humidity and a large voltage bias with respect to ground. The current inside of the frame is in the form of electron motion, but in the glass and polymer, it is in at least a large part attributable to the movement of ions. When the mode of current flow changes from electronic to ionic conduction, electrochemical reactions will take place at the interface. This can include reactions that produce volatile chemical species like H 2 , CO x , and O 2 , along with ionic species such as OH − and H 3 O + . Here, we see evidence of the importance of different charge carriers with different diffusion rates and the influence of electrochemical processes involved. The application of negative voltage to the cell circuit affects the resistivity of glass producing surfaces with poor conductivity but with some increases in the electrochemical potential producing complicated interactions that are important when the voltage is changed. In the polymer, there is the development of a space charge region and a chemical gradient providing two oppositional forces to current flow, which when released create a complicated discharge process. Here, we give a basic understanding of the charge/discharge of PV cells highlighting how the specific mechanisms are important in understanding some of the degradation processes in PV modules. We find that there is evidence of multiple significant charge carrier species with different diffusion time scales. The glass/polymer interface forms a depleted region of higher resistance after prolonged exposure to current. Charge also builds up at the polymer to cell antireflective coating interface and mostly flows to the gridlines to experience electrochemical reactions. These complexities result in non‐linear behavior where the apparent resistivities of the different layers change during charge/discharging processes, making the modeling of the current flow extremely difficult.

14 SOLAR ENERGY↗

A simplified, data-constrained approach to estimate the permafrost carbon–climate feedback

We present an approach to estimate the feedback from large-scale thawing of permafrost soils using a simplified, data-constrained model that combines three elements: soil carbon (C) maps and profiles to identify the distribution and type of C in permafrost soils; incubation experiments to quantify the rates of C lost after thaw; and models of soil thermal dynamics in response to climate warming. We call the approach the Permafrost Carbon Network Incubation–Panarctic Thermal scaling approach (PInc-PanTher). The approach assumes that C stocks do not decompose at all when frozen, but once thawed follow set decomposition trajectories as a function of soil temperature. The trajectories are determined according to a three-pool decomposition model fitted to incubation data using parameters specific to soil horizon types. We calculate litterfall C inputs required to maintain steady-state C balance for the current climate, and hold those inputs constant. Soil temperatures are taken from the soil thermal modules of ecosystem model simulations forced by a common set of future climate change anomalies under two warming scenarios over the period 2010 to 2100. Under a medium warming scenario (RCP4.5), the approach projects permafrost soil C losses of 12.2–33.4 Pg C; under a high warming scenario (RCP8.5), the approach projects C losses of 27.9–112.6 Pg C. Projected C losses are roughly linearly proportional to global temperature changes across the two scenarios. These results indicate a global sensitivity of frozen soil C to climate change (γ sensitivity) of –14 to –19 Pg C °C–1 on a 100 year time scale. For CH 4 emissions, our approach assumes a fixed saturated area and that increases in CH 4 emissions are related to increased heterotrophic respiration in anoxic soil, yielding CH 4 emission increases of 7% and 35% for the RCP4.5 and RCP8.5 scenarios, respectively, which add an additional greenhouse gas forcing of approximately 10–18%. In conclusion, the simplified approach presented here neglects many important processes that may amplify or mitigate C release from permafrost soils, but serves as a data-constrained estimate on the forced, large-scale permafrost C response to warming.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Self-modulation oscillations in a solid-state coupled-cavity ring laser

We propose a theoretical model describing the radiation dynamics in a solid-state coupled-cavity ring laser. Based on the numerical simulation conducted within the framework of this model, we investigate antiphase harmonic oscillations of counterpropagating wave intensities. It is shown that the amplitudes and frequencies of self-modulation oscillations in cases of in-phase and antiphase cavity couplings differ significantly. In the case of antiphase coupling, a new possibility of increasing the scale factor with increasing perimeter of the additional cavity is found. The dependence of the frequency of self-modulation oscillations on the optical nonreciprocity produced in the main cavity by a constant magnetic field is studied experimentally. Comparison of experimental and theoretical results shows good agreement between theory and experiment. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PROPAGATION OF GRAVITY WAVES IN A CONVECTIVE LAYER

We perform numerical simulations of gravity mode propagation in a convective layer to investigate the observed association between small spatial scales and low frequencies in the photospheric velocity fields. According to the linear theory, when the fluid layer is convectively unstable, gravity modes are evanescent waves. However, in simple two-dimensional numerical settings, we find that when the equilibrium structure is modified by coherent large-scale convective motions, the waves injected at the bottom of the layer are no longer evanescent. In this situation, gravity waves can be detected at the surface of the layer. In our simplified model the injected wave's frequency remains unchanged, but its amplitude has a spatial modulation determined by the convective structure. This result may explain some analyses done with the proper orthogonal decomposition method of the solar surface velocity field even though solar convection is far more complex than the convection model considered here.

79 ASTRONOMY AND ASTROPHYSICS↗

Recent advances in remote sensing; Proceedings of the First International Geoscience and Remote Sensing Symposium, Washington, DC, June 8-10, 1981

The state of the art in remote sensing of the earth and the planets was discussed in terms of sensor performance, signal processing, and data interpretation. Particular attention was given to lidar for characterizing atmospheric particulates, the modulation of short waves by long ocean gravity waves, and runoff modeling for snow-covered areas. The use of NOAA-6 spacecraft AVHRR data to explore hydrologic land surface features, the effects of soil moisture and vegetation canopies on microwave and thermal microwave emissions, and regional scale evapotranspiration rate determination through satellite IR data are examined. A Shuttle experiment to demonstrate high accuracy global time and frequency transfer is described, along with features of the proposed Gravsat, radar image processing for rock-type discrimination, and passive microwave sensing of temperature and salinity in coastal zones.

Mcintosh, R.↗

SMALL-SCALE SOLAR WIND TURBULENCE DUE TO NONLINEAR ALFVÉN WAVES

We present an evolution of wave localization and magnetic power spectra in solar wind plasma using kinetic Alfvén waves (AWs) and fast AWs. We use a two-fluid model to derive the dynamical equations of these wave modes and then numerically solve these nonlinear dynamical equations to analyze the power spectra and wave localization at different times. The ponderomotive force associated with the kinetic AW (or pump) is responsible for the wave localization, and these thin slabs (or sheets) become more chaotic as the system evolves with time until the modulational instability (or oscillating two-stream instability) saturates. From our numerical results, we notice a steepening of the spectra from the inertial range (k{sup −1.67}) to the dispersion range (k{sup −3.0}). The steepening of the spectra could be described as the energy transference from longer to smaller scales. The formation of complex magnetic thin slabs and the change of the spectral index may be considered to be the main reason for the charged particles acceleration in solar wind plasma.

79 ASTRONOMY AND ASTROPHYSICS↗

Sub-Planckian two-field inflation consistent with the Lyth bound

The BICEP2 observation of a large tensor-to-scalar ratio, r = 0.20{sup +0.07}{sub -0.05}, implies that the inflaton φ in single-field inflation models must satisfy φ ∼ 10M{sub Pl} in order to produce sufficient inflation. This is a problem if interaction terms suppressed by the Planck scale impose a bound φ ∼< M{sub Pl}. Here we consider whether it is possible to have successful sub-Planckian inflation in the case of two-field inflation. The trajectory in field space cannot be radial if the effective single-field inflaton is to satisfy the Lyth bound. By considering a complex field Φ, we show that a near circular but aperiodic modulation of a |Φ|{sup 4} potential can reproduce the results of φ{sup 2} chaotic inflation for n{sub s} and r while satisfying |Φ| ∼< 0.01 M{sub Pl} throughout. More generally, for models based on a |Φ|{sup 4} potential, the simplest sub-Planckian models are equivalent to φ{sup 2} and φ{sup 4/3} chaotic inflation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compositionally-Driven Formation Mechanism of Hierarchical Morphologies in Co-Deposited Immiscible Alloy Thin Films

Co-deposited, immiscible alloy systems form hierarchical microstructures under specific deposition conditions that accentuate the difference in constituent element mobility. The mechanism leading to the formation of these unique hierarchical morphologies during the deposition process is difficult to identify, since the characterization of these microstructures is typically carried out post-deposition. We employ phase-field modeling to study the evolution of microstructures during deposition combined with microscopy characterization of experimentally deposited thin films to reveal the origin of the formation mechanism of hierarchical morphologies in co-deposited, immiscible alloy thin films. Our results trace this back to the significant influence of a local compositional driving force that occurs near the surface of the growing thin film. We show that local variations in the concentration of the vapor phase near the surface, resulting in nuclei (i.e., a cluster of atoms) on the film’s surface with an inhomogeneous composition, can trigger the simultaneous evolution of multiple concentration modulations across multiple length scales, leading to hierarchical morphologies. We show that locally, the concentration must be above a certain threshold value in order to generate distinct hierarchical morphologies in a single domain.

36 MATERIALS SCIENCE↗

Decomposition and Algorithmic Approaches for Solving Large-Scale Process Family Design Problems

Our most recent work expands the water desalination case study from 76 variants to 10,897 variants using the equation-oriented model built in Pyomo as part of the PARETO project. Using the discretization formulation presented in Stinchfield (2024a), rather than solving for all 10,897 variants simultaneously, we decompose the formulation into subproblems containing subsets of variants from the process family. We solve the overall problem with Progressive Hedging (PH) deployed in parallel on a distributed HPC cluster using the open-source Python package mpi-sppy (Knueven et al., 2023). This approach allowed us to solve this process family design problem to ~1.5% relative optimality gap in about 5 hours; in comparison, Gurobi reached ~50% relative optimality gap in about 6 hours (Stinchfield et al., 2024b). However, this approach still requires discretization of the common unit module design ranges; additionally, PH acts as a heuristic for MILP’s with gap-closing capabilities. Ideally, we would not have to use ML surrogates or discretization to solve this problem, instead solving the process family design problem with the equation-oriented model directly to achieve the most accurate results. However, recall that we did not consider solving the MINLP directly due to complexity and size. In this work, we aim to decompose and solve this large-scale MINLP using a Structured Nonlinear Global Optimization algorithm presented by Cao and Zavala (2019).

Stinchfield, Georgia↗

Steady state estimation of soil organic carbon using satellite‐derived canopy leaf area index

Abstract Estimation of soil organic carbon (SOC) stock using models typically requires long term spin‐up of the carbon‐nitrogen (CN) models, which has become a bottleneck for global modeling. We report a new numerical approach to estimate global SOC stock that can alleviate long spin‐up. The approach uses satellite‐based canopy leaf area index (LAI) and takes advantage of a reaction‐based biogeochemical module—Next Generation BioGeoChemical Module (NGBGC) that was recently developed and incorporated in version 4 of the Community Land Model (CLM4). Although NGBGC uses the same CN mechanisms as in CLM4CN, it can be easily configured to run prognostic or steady state simulations. The new approach was applied at point and global scales and compared with SOC derived from spin‐up by running NGBGC in the prognostic mode, and SOC from the Harmonized World Soil Database (HWSD). The steady state solution is comparable to the spin‐up value when the satellite LAI is close to that from the spin‐up solution, and largely captured the global variability of the HWSD SOC across the different dominant plant functional types (PFTs). The correlation between the simulated and HWSD SOC was, however, weak at both point and global scales, suggesting the needs for improving the biogeochemical processes described in CLM4 and updating HWSD. Besides SOC, the steady state solution also includes all other state variables simulated by a spin‐up run, which makes the tested approach a promising tool to efficiently estimate global SOC distribution and evaluate and compare multiple aspects simulated by different CN mechanisms in the model.

54 ENVIRONMENTAL SCIENCES↗

Engineering quorum-sensing circuits in Synechococcus elongatus PCC 7942 towards self-inducible systems

Despite significant potential for cyanobacteria as sustainable bioproduction chases, there are limited examples of scaled cyanobacterial bioproduction. In part, this is because most cyanobacterial species are poorly adapted to bioreactor cultivation conditions and lack features that facilitate biomass growth and harvesting at scale. We explored quorum sensing (QS) pathways derived from heterotrophic microbes as a method for autoinduction of gene expression circuits coordinated to population density in cyanobacteria. Here, we integrated genetic modules designed to produce and detect the diffusible QS signal, acyl-homoserine lactones (AHLs), in the cyanobacterial model, Synechococcus elongatus PCC 7942 (S. elongatus). We demonstrate that S. elongatus heterologously produces sufficient AHL signals to activate gene expression in a dose-dependent and population density-responsive manner. A hybrid combination of AHL synthesis enzyme from Vibrio fischeri (Lux system) with the transcription factor receiver from Pseudomonas aeruginosa (Las system) provides an ideal activation ratio and mitigates toxicity observed with some AHL systems. As a proof of concept, we coupled the QS pathway to the expression of a cell division inhibitory gene, cdv3, facilitating late-phase cell elongation, cell sedimentation, and improved biomass recovery. Our findings provide a foundation for the development of auto-induction systems leverageable to improve cyanobacterial biotechnology applications.

Acyl homoserine lactones (AHL)↗

Steady global surface warming from 1973 to 2022 but increased warming rate after 1990

The change in global mean surface temperature is a crucial and broadly used indicator of the evolution of climate change. Any decadal scale changes in warming rate are however obfuscated by internal variability. Here we show that the surface temperature increase through the recent La Nina influenced years (2022) is consistent with the 50-year trend of 0.18 °C/decade. We use an Earth System Model based tool to filter out modulations to the warming rate by sea-surface temperature patterns and find consistent warming rates in four major global temperature data series. However, we also find clear indications, in all observational series, of a step-up in warming rate since around 1990. CMIP6 models generally do not capture this observed combination of long-term warming rate and recent increase.

58 GEOSCIENCES↗

Background analysis and status of the ANAIS dark matter project

ANAIS (Annual modulation with NaI Scintillators) is a project aiming to set up at the new facilities of the Canfranc Underground Laboratory (LSC), a large scale NaI(Tl) experiment in order to explore the DAMA/LIBRA annual modulation positive result using the same target and technique. Two 12.5 kg each NaI(Tl) crystals provided by Alpha Spectra took data at the LSC in the ANAIS-25 set-up. The comparison of the background model for the ANAIS-25 prototypes with the experimental results is presented. ANAIS crystal radiopurity goals have been achieved for {sup 232}Th and {sup 238}U chains, but a {sup 210}Pb contamination out-of-equilibrium was identified, whose origin has been studied. The high light collection efficiency obtained with these prototypes allows to anticipate an energy threshold of the order of 1 keVee. A new detector, with improved performances, was received in March 2015 and very preliminary results are shown.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

PV DMFA [SWR-21-105]

The Photovoltaic Dynamic Material Flow Assessment (PV DMFA) model (also referred to here as “The model”) is a computational framework written in Python based on utility-scale PV electricity generation to quantify time-series stocks and flows of PV materials primarily in crystalline silicon PV technologies. The model evaluates cradle-to-cradle life cycle of utility-scale solar PV systems in the United States in the period 2000-2100. PV DMFA serves as a sustainability analysis tool to assess the impacts of different material circularity practices (i.e., reduce, reuse/refurbish, remanufacture, and recycle), PV module design shifts and sensitivity of material processing and technology related parameters to material installations, waste creation and raw material depletion in PV material supply chains. This tool enables advanced planning for future material needs and informs sustainable pathways for PV material management in the circular economy. This tool could be helpful to a wide range of stakeholders; Particularly, researchers and manufacturers looking for technoeconomic and/or environmental life cycle analysis (LCA) feedback for renewable energy (RE) systems.

Khalifa, SherifA.↗