Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MoS2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

High Surface Area MoS 2 /Graphene Hybrid Aerogel for Ultrasensitive NO 2 Detection

A MoS 2 /graphene hybrid aerogel synthesized with two-dimensional MoS 2 sheets coating a high surface area graphene aerogel scaffold is characterized and used for ultrasensitive NO 2 detection. The combination of graphene and MoS 2 leads to improved sensing properties with the graphene scaffold providing high specific surface area and high electrical and thermal conductivity and the single to few-layer MoS2 sheets providing high sensitivity and selectivity to NO 2 . The hybrid aerogel is integrated onto a low-power microheater platform to probe the gas sensing performance. At room temperature, the sensor exhibits an ultralow detection limit of 50 ppb NO 2 . By heating the material to 200 °C, the response and recovery times to reach 90% of the final signal decrease to <1 min, while retaining the low detection limit. The MoS 2 /graphene hybrid also shows good selectivity for NO 2 against H 2 and CO, especially when compared to bare graphene aerogel. The unique structure of the hybrid aerogel is responsible for the ultrasensitive, selective, and fast NO 2 sensing. The improved sensing performance of this hybrid aerogel also suggests the possibility of other 2D material combinations for further sensing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2019

A Long-Cycle-Life Lithium-CO{sub 2} Battery with Carbon Neutrality.

Lithium-CO2 batteries are attractive energy-storage systems for fulfilling the demand of future large-scale applications such as electric vehicles due to their high specific energy density. However, a major challenge with Li-CO2 batteries is to attain reversible formation and decomposition of the Li2CO3 and carbon discharge products. A fully reversible Li-CO2 battery is developed with overall carbon neutrality using MoS2 nanoflakes as a cathode catalyst combined with an ionic liquid/dimethyl sulfoxide electrolyte. This combination of materials produces a multicomponent composite (Li2CO3/C) product. The battery shows a superior long cycle life of 500 for a fixed 500 mAh g(-1) capacity per cycle, far exceeding the best cycling stability reported in Li-CO2 batteries. The long cycle life demonstrates that chemical transformations, making and breaking covalent C-O bonds can be used in energy-storage systems. Theoretical calculations are used to deduce a mechanism for the reversible discharge/charge processes and explain how the carbon interface with Li2CO3 provides the electronic conduction needed for the oxidation of Li2CO3 and carbon to generate the CO2 on charge. This achievement paves the way for the use of CO2 in advanced energy-storage systems.

carbon neutrality↗
DOE OSTI2016

Comparative techno-economic analysis and process design for indirect liquefaction pathways to distillate-range fuels via biomass-derived oxygenated intermediates upgrading: Liquid Transportation Fuel Production via Biomass-derived Oxygenated Intermediates Upgrading

This paper presents a comparative techno-economic analysis (TEA) of five conversion pathways from biomass to gasoline-, jet-, and diesel-range hydrocarbons via indirect liquefaction with specific focus on pathways utilizing oxygenated intermediates. The four emerging pathways of interest are compared with one conventional pathway (Fischer-Tropsch) for the production of the hydrocarbon blendstocks. The processing steps of the four emerging pathways include: biomass to syngas via indirect gasification, gas cleanup, conversion of syngas to alcohols/oxygenates followed by conversion of alcohols/oxygenates to hydrocarbon blendstocks via dehydration, oligomerization, and hydrogenation. Conversion of biomass-derived syngas to oxygenated intermediates occurs via three different pathways, producing: 1) mixed alcohols over a MoS2 catalyst, 2) mixed oxygenates (a mixture of C2+ oxygenated compounds, predominantly ethanol, acetic acid, acetaldehyde, ethyl acetate) using an Rh-based catalyst, and 3) ethanol from syngas fermentation. This is followed by the conversion of oxygenates/alcohols to fuel-range olefins in two approaches: 1) mixed alcohols/ethanol to 1-butanol rich mixture via Guerbet reaction, followed by alcohol dehydration, oligomerization, and hydrogenation, and 2) mixed oxygenates/ethanol to isobutene rich mixture and followed by oligomerization and hydrogenation. The design features a processing capacity of 2,000 tonnes/day (2,205 short tons) of dry biomass. The minimum fuel selling prices (MFSPs) for the four developing pathways range from $3.40 to $5.04 per gasoline-gallon equivalent (GGE), in 2011 US dollars. Sensitivity studies show that MFSPs can be improved with co-product credits and are comparable to the commercial Fischer-Tropsch benchmark ($3.58/GGE). Overall, this comparative TEA study documents potential economics for the developmental biofuel pathways via mixed oxygenates.

Tan, Eric C. D.↗
DOE OSTI2015

Distribution of Metal Cations in Ni-Mo-W Sulfide Catalysts

The distribution of metal cations and the morphology of unsupported NiMo, NiW, and NiMoW sulfide catalysts were explored qualitatively and quantitatively. In the bi- and trimetallic catalysts, Mo(W)S-2 nanoparticles are deposited on Ni sulfide particles of varying stoichiometry and sizes (crystalline Ni9S8, and Ni3S4 were identified). These nanoparticles are stacks of Mo(W)S-2 slabs with varying size, degrees of bending and mismatch between the slabs. High resolution electron microscopy and X-ray absorption spectroscopy based on particle modeling revealed a statistical distribution of Mo and W within individual layers in sulfide NiMoW, forming intralayer mixed Mo1-xWxS2. Ni is associated with MoS2, WS2, and Mo1-xWxS2 creating Ni-promoted phases. The incorporation of Ni at the edges of the slabs was the highest for sulfide NiMoW. This high concentration of Ni in sulfide NiMoW, as well as its long bent Mo1-xWxS2 slabs, were paralleled by the highest activity for nitrogen and sulfur removal from model hydrocarbons such as o-propylaniline and dibenzothiophene.

electron microscopy, hydrodenitrogenation, hydrode↗
DOE OSTI2015

Characterization of Deactivated Bio-oil Hydrotreating Catalysts

Deactivation of bio-oil hydrotreating catalysts remains a significant challenge because of the poor quality of pyrolysis bio-oil input for hydrotreating and understanding their deactivation mode is critical to developing improved catalysts and processes. In this research, we developed an understanding of the deactivation of two-step bio-oil hydrotreating catalysts (sulfided Ru/C and sulfided CoMo/C) through detailed characterization of the catalysts using various complimentary analytical techniques. Severe fouling of both catalysts by carbonaceous species was the major form of deactivation, which is consistent with the significant loss of surface area and pore volume of both deactivated catalysts and the significant increase of the bulk density. Further analysis of the carbonaceous species by thermogravimetric analysis and x-ray photoelectron spectroscopy indicated that the carbonaceous species was formed by condensation reaction of active species such as sugars and sugar derivatives (aldehydes and ketones) in bio-oil feedstock during bio-oil hydrotreating under the conditions and catalysts used. Microscopy results did not show metal sintering of the Ru/C catalyst. However, X-ray diffraction indicated a probable transformation of the highly-active CoMoS phase in the sulfided CoMo/C catalyst to Co8S9 and MoS2 phase with low activity. Loss of the active site by transport of inorganic elements from the bio-oil and the reactor construction material onto the catalyst surface also might be a cause of deactivation as indicated by elemental analysis of spent catalysts.

bio-oil hydrotreating↗
DOE OSTI2017

Influence of H 2 O and H 2 S on the composition, activity, and stability of sulfided Mo, CoMo, and NiMo supported on MgAl 2 O 4 for hydrodeoxygenation of ethylene glycol

Here in this work, density functional theory (DFT), catalytic activity tests, and in-situ X-ray absorption spectroscopy (XAS) was performed to gain detailed insights into the activity and stability of MoS 2 , Ni-MoS 2 , and Co-MoS 2 catalysts used for hydrodeoxygenation (HDO) of ethylene glycol upon variation of the partial pressures of H 2 O and H 2 S. The results show high water tolerance of the catalysts and highlight the importance of promotion and H 2 S level during HDO. DFT calculations unraveled that the active edge of MoS 2 could be stabilized against SO exchanges by increasing the partial pressure of H 2 S or by promotion with either Ni or Co. The Mo, NiMo, and CoMo catalysts of the present study were all active and fairly selective for ethylene glycol HDO at 400 °C, 27 bar H 2 , and 550–2200 ppm H 2 S, and conversions of ≈50–100%. The unpromoted Mo/MgAl 2 O 4 catalyst had a lower stability and activity per gram catalyst than the promoted analogues. The NiMo and CoMo catalysts produced ethane, ethylene, and C1 cracking products with a C 2 /C 1 ratio of 1.5–2.0 at 550 ppm H 2 S. This ratio of HDO to cracking could be increased to ≈2 at 2200 ppm H 2 S which also stabilized the activity. Removing H 2 S from the feed caused severe catalyst deactivation. Both DFT and catalytic activity tests indicated that increasing the H 2 S concentration increased the concentration of SH groups on the catalyst, which correspondingly activated and stabilized the catalytic HDO performance. In-situ XAS further supported that the catalysts were tolerant towards water when exposed to increasing water concentration with H2O/H2S ratios up to 300 at 400–450 °C. Raman spectroscopy and XAS showed that MoS2 was present in the prepared catalysts as small and highly dispersed particles, probably owing to a strong interaction with the support. Linear combination fitting (LCF) analysis of the X-ray absorption near edge structure (XANES) spectra obtained during in-situ sulfidation showed that Ni was sulfided faster than Mo and CoMo, and that Mo was sulfided faster when promoted with Ni. Extended X-ray absorption fine structure (EXAFS) results showed the presence of MoS 2 in all sulfided catalysts. Lastly, sulfided CoMo was present as a mixture of CoMoS and Co 9 S 8 , whereas sulfided NiMo was present as NiMoS.

09 BIOMASS FUELS↗
DOE OSTI2019

Carbon nanotubes-molybdenum disulfide composite for enhanced hydrogen evolution reaction

We report molybdenum disulfide, supported by a carbon nanotube matrix fabricated through the hydrothermal method, is found to be an alternative catalyst for enhanced hydrogen evolution reactions. The improved performance of carbon nanotube and molybdenum disulfide (CNT-MoS 2 ) composites is attributed to the synergic effects of CNT and MoS 2 that provide a good conducting network as well as a large surface area, increasing catalytic activity for the hydrogen evolution reaction. The synthesized CNT-MoS 2 composite provides a low overpotential (-0.14 V), much lower than MoS 2 itself (-0.29 V), at a current density of 10 mA cm -2 . The CNT-MoS2 composite shows lower resistance (24 Ω) compared to the MoS 2 precursor (1000 Ω) at a frequency of 3000 Hz, demonstrating an improved composite conductivity. The CNT-MoS 2 composite also exhibits high stability and excellent durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Phase transition in two-dimensional monolayer (1L)-molybdenum disulfide induced by atomic S-basal plane gliding via synchrotron X-ray monochromatic beam radiation for superior electronic performance

Here, in this work, we report a novel approach to reduce the channel resistance by inducing a phase transition behavior from 2H to 1T in a monolayer MoS 2 (1L-MoS 2 ) by a synchrotron X-ray monochromatic beam (mono-beam) radiation. The effects of the biphase structure by the mono-beam on the 1L-MoS2 film were investigated using Raman spectra, photoluminescence (PL) spectra, scanning tunneling microscopy, and scanning tunneling spectroscopy, respectively. Through material characterization, we identified that the lateral sliding of S-vacancies along the S-plane in the 1L-MoS 2 is the key reason for the origin of unidirectional phase transition. The precise phase engineering triggered by the mono-beam radiation process allows the realization of field-effect transistors (FET) with 2X improvement in mobility toward a high on/off ratio (~10 8 ) and a near-ideal subthreshold swing of ~88 mV per decade. The validity of the phase engineering could be further extended for its application as a memory device, exhibiting a gate tunable conduction modulation behavior and a high resistance ratio of ~10 2 at a gate bias of 5 V with endurance of ~100 cycles. Furthermore, an artificial neural network using the synaptic weight update with accuracy of ~93 % was achieved.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Sacrificial template synthesis of hollow C@MoS 2 @PPy nanocomposites as anodes for enhanced sodium storage performance

Molybdenum disulfide (MoS 2 ) has become a potential anode material for sodium-ion batteries (SIBs) by showing decent cell performance but it suffers poor electronic conductivity and large volume expansion during sodiation. Here we design a nanocomposite with hollow nitrogen doped carbon and polypyrrole modified MoS 2 for improving the performance for SIBs. The designed nanocomposite shows a much-improved electronic conductivity and the design of the architecture provides sufficient channels for mass transport and accommodates large volume change. This C@MoS 2 @PPy anode delivers a high specific capacity of 713 mAh g -1 at 0.1 A g -1 for 100 cycles, and an excellent rate capacity of 294 mAh g -1 at 5 A g -1 for 500 cycles. This specific architecture of C@MoS2@PPy could guide the future design of the electrode material in SIBs and its superior electrochemical performance indicates the great potential application for SIBs.

25 ENERGY STORAGE↗
DOE OSTI2020

The importance of frontier orbital symmetry in the adsorption of diiodobenzene on MoS 2 (0001)

Evidence of a role of frontier orbital symmetry, in the adsorption process of diiodobenzene on MoS 2 (0001), appears in the huge differences in the rate of adsorption between 1,3-diiodobenzene, 1,2-diiodobenzene and 1,4-diiodobenzene isomers on MoS2. Experiments indicate that the rate of adsorption of 1,3-diiodobenzene on MoS 2 (0001) is much greater than that of the 1,2-diodobenzene and 1,4-diiodbenzene isomers. As the differences in calculated diiodobenzene isomer-MoS 2 system adsorption energies and electron affinities are negligible, frontier orbital symmetry appears to play a significant role in diiodobenzene adsorption on MoS 2 (0001). Additionally, the experimental and theory results, in combination, suggest that a rehybridization requirement, forced by frontier orbital symmetry, comes at a cost of a reduced sticking coefficient. With the introduction of defects, which lower the adsorption site symmetry at the MoS 2 (0001) surface, the rate of 1,3-diiodobenzene adsorption on MoS 2 (0001) decreases, while the rates of 1,2-diodobenzene adsorption significantly increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Van der Waals Sandwich Structures for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) intensity of two-dimensional (2D) materials critically depends on the resonant conditions and factors such as the substrate interferences and molecule adsorption fluctuations, making comprehensive investigation, understanding, and optimization of 2D materials-assisted SERS challenging. Here, in this work, the wavelength-dependent SERS of van der Waals structures of 2D materials is systematically investigated, focusing on the intrinsic frequency-dependent Raman tensors by first-principles method while ruling out other extrinsic factors in experiments. Distinct enhancement profiles are found for different 2D materials, among which MoS2 and graphene exhibit remarkably strong and broadband enhancement effects. For stacked multilayers and heterostructures of 2D materials, the calculated SERS addresses the significance of the first contact monolayer effect. Based on the above theory, the van der Waals sandwich structures are proposed and investigated as the SERS substrates, verifying a further significantly enhanced SERS performance. This resonant first-principles study demonstrates a comprehensive and analytical way to explore and promote the SERS of van der Waals structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Elastic NaxMoS2-carbon-BASE triple interface direct robust solid-solid interface for all-solid-state Na-S batteries

The promises of all-solid-state (ASS) sodium batteries for the next generation energy storage are widely recognized but their developments have been severely constrained by the difficulties to design favorable solid-solid interfaces for unhindered Na-ion transport. Using the most promising ß?-Al2O3 solid state electrolyte (BASE) as a platform, we demonstrate here a triple nanojunction strategy that provides simultaneous strong Na adhesion and continuous Na-ions diffusion at solid-solid interface. Such triple junctions (NaxMoS2-carbon-BASE) were constructed by adhering ternary composite Na anodes containing dispersed 3 wt% MoS2 and 3 wt% carbon on BASE, and provide nearly complete adhesion of Na on BASE with a much smaller contact angle (~ 45o vs. 120o of pristine Na). The composite Na anodes exhibited ~ 3 times improved elastic property and the synergy of NaxMoS2 and carbon provides the required ionic and electronic diffusion channels at solid-solid interface, which significantly improve Na utilization and resist premature failure due to loss of solid-solid contact as Na shrink during high capacity stripping. As a result, Na metal at the triple junction exhibited more than five time reduced charge transfer resistance and at least 200 hours stable battery cycling at practical current densities. The novel anode architecture also enabled high capacity cycling of prototype ASS sodium sulfur batteries when coupled with advanced sulfur cathodes containing intrinsic Na-ions diffusion channels and redox catalytic mediators, leading to stable cycling with specific capacity of 1110 mAh g-1.

ß”-Al2O3 solid electrolyte, solid state batteries,↗
DOE OSTI2016

Low-Frequency Interlayer Raman Modes to Probe Interface of Twisted Bilayer MoS 2

A variety of van der Waals homo- and hetero- structures assembled by stamping monolayers together present optoelectronic properties suitable for diverse applications. Understanding the details of the interlayer stacking and resulting coupling is crucial for tuning these properties. Twisted bilayer transition metal dichalcogenides offer a great platform for developing a precise understanding of the structure/property relationship. Here, we study the low-frequency interlayer shear and breathing Raman modes (<50 cm-1) in twisted bilayer MoS 2 by Raman spectroscopy and first-principles modeling. Twisting introduces both rotational and translational shifts and significantly alters the interlayer stacking and coupling, leading to notable frequency and intensity changes of low-frequency modes. The frequency variation can be up to 8 cm-1 and the intensity can vary by a factor of ~5 for twisting near 0 and 60 , where the stacking is a mixture of multiple high-symmetry stacking patterns and is thus especially sensitive to twisting. Moreover, for twisting angles between 20 and 40 , the interlayer coupling is nearly constant since the stacking results in mismatched lattices over the entire sample. It follows that the Raman signature is relatively uniform. Interestingly, unlike the breathing mode, the shear mode is extremely sensitive to twisting: it disappears between 20 and 40 as its frequency drops to almost zero due to the stacking-induced mismatch. Note that for some samples, multiple breathing mode peaks appear, indicating non-uniform coupling across the interface. In contrast to the low-frequency interlayer modes, high-frequency intralayer Raman modes are much less sensitive to interlayer stacking and coupling, showing negligible changes upon twisting. Our research demonstrates the effectiveness of low-frequency Raman modes for probing the interfacial coupling and environment of twisted bilayer MoS2, and potentially other two-dimensional materials and heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Morphology-Controlled Discharge Profile and Reversible Cu Extrusion and Dissolution in Biomimetic CuS

Metal sulfides, such as CuS, SnS2, Co9S8, MoS2, are high capacity anode materials for Li-ion batteries. However, these materials go through a conversion reaction with Li+, which is accompanied by the phase transformation and inevitably results in a huge volume expansions, therefore causing performance degradation. Here, we report nanoscale engineering route to efficiently control the overall volume expansion for enhanced performance. We engineered CuS with nanoplate assembly on a nanostring, leading to a nanostructure of mimicking the crassula baby necklace (CBN) in the natural plant. Using in-situ transmission electron microscopy (in-situ TEM), we probed the lithiation kinetics and dynamic structural transformations. Due to the linkage of the central nanostring, the CuS CBN exhibited fast Li+ diffusion along the axial direction and high mechanical stability during lithiation. The volume expansion was minimal for the CuS CBN due to the pre-engineered gap between these plates. The CuS followed a two-step lithiation process with Cu2S and Li2S formation as the first step and Cu extrusion from Cu2S in the later stage. Interestingly, during the Cu2S to Cu conversion, there was a incubation period before the metallic Cu extrusion, which is featured by the formation of an amorphous structure due to the large lattice strain and distortion associated with the displacement of Cu by Li ions. In the final stage, the lithiated amorphous phase recrystallized to a composite of Cu nanocrystals dispersed in a polycrystalline Li2S matrix. Associate with the nanoscale size, the Cu nanocrystals can reversibly dissolve into the matrix upon delithiation. The present work demonstrates tailoring of desired functionality through nanoscale engineering of using bionic methods.

Han, Shaobo↗
DOE OSTI2018

Mitigation of Shuttle Effect in Li–S Battery Using a Self-Assembled Ultrathin Molybdenum Disulfide Interlayer

Lithium–sulfur batteries are promising for low-cost and high-energy storage, but their applications are still limited by poor cycling stability owing to soluble lithium polysulfide shuttling during battery operation. Avoiding shuttle effect is challenging but it is essential to avoid active material loss and prevent performance decay. We use an ultrathin layer of MoS 2 with thickness of 10–40 nm, which is 1–2 orders of magnitude thinner than conventional interlayers, for Li–S batteries to mitigate polysulfide shuttling. The MoS2 layer formed by exfoliated nanoflakes is deposited by the scalable liquid-based self-assembly method. With less than 1% of additional weight in the cathode, the MoS 2 interlayer with complete coverage inhibits polysulfide diffusion across the separator and therefore remarkably improves the battery performances. Reversible specific capacity reaches 1010 and 600 mA h g –1 at 0.5 and 2C rates, respectively, which decay slowly over 400 cycles (0.11% per cycle). Moreover, the MoS 2 films with high density of catalytic active flake edges enable high areal sulfur loading up to 10 mg cm –2 and areal capacity up to 9.7 mA h cm –2 at a current density of 3.2 mA cm –2 .

25 ENERGY STORAGE↗
DOE OSTI2024

Tailoring Interlayer Coupling in Few-Layer MoS 2 with Stacking Configuration

Here we manipulated the stacking configuration of a few-layer MoS 2 to investigate the impact of interlayer coupling on electrical band engineering. By simultaneously synthesizing two distinct stacking types of MoS2 islands, wedding cake (W) and spiral (S), on the same substrate, we explored layer-dependent electrical properties under identical experimental conditions. We used multiple scanning probe microscopy techniques to map local electronic properties with respect to the number of layers, stacking configurations, and local heterogeneities. First-principles calculations verified the role of distinct interlayer coupling in terms of the interlayer distance. Our findings highlight the critical role of interlayer coupling in applications of transition metal dichalcogenides.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Effect of Intercalated Metals on the Electrocatalytic Activity of 1T-MoS 2 for the Hydrogen Evolution Reaction

We show that intercalation of cations (Na + , Ca2 + , Ni2 + , and Co2 + ) into the interlayer region of 1T-MoS2 is an effective strategy to lower the overpotential for the hydrogen evolution reaction (HER). In acidic media the onset potential for 1T-MoS 2 with intercalated ions is lowered by ~60 mV relative to that for pristine 1T-MoS 2 (onset of ~180 mV). Density functional theory (DFT) calculations show a lowering in the Gibbs free energy for H-adsorption (ΔGH) on these intercalated structures relative to intercalant-free 1T-MoS 2 . The DFT calculations suggest that Na + intercalation results in a $ΔG_H$ close to zero. Consistent with calculation, experiments show that the intercalation of Na + ions into the interlayer region of 1T-MoS 2 results in the lowest overpotential for the HER.

08 HYDROGEN↗