Assessment of Numerical and Modeling Errors of RANS-based Transition Models for Low-Reynolds Number 2-D Flows based Transition Models
Explore the source record for details and available documents.
CFD↗
SEARCH · Engineering Papers
Results for “MODEL”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Evaluation of convection‐permitting model simulations of cloud populations associated with the Madden‐Julian Oscillation using data collected during the AMIE/DYNAMO field campaign
Abstract Regional convection‐permitting model simulations of cloud populations observed during the 2011 Atmospheric Radiation Measurement (ARM) Madden‐Julian Oscillation Investigation Experiment/Dynamics of the Madden‐Julian Oscillation Experiment (AMIE/DYNAMO) field campaign are evaluated against ground‐based radar and ship‐based observations. Sensitivity of model simulated reflectivity, surface rain rate, and cold pool statistics to variations of raindrop breakup/self‐collection parameters in four state‐of‐the‐art two‐moment bulk microphysics schemes in the Weather Research and Forecasting (WRF) model is examined. The model simulations generally overestimate reflectivity from large and deep convective cells, and underestimate stratiform rain and the frequency of cold pools. In the sensitivity experiments, introduction of more aggressive raindrop breakup or decreasing the self‐collection efficiency increases the cold pool occurrence frequency in all of the simulations, and slightly reduces the reflectivity and precipitation statistics bias in some schemes but has little effect on the overall mean surface precipitation. Both the radar observations and model simulations of cloud populations show an approximate power law relationship between convective echo‐top height and equivalent convective cell radius.
Hagos, Samson↗
A climate model projection weighting scheme accounting for performance and interdependence: Model Projection Weighting Scheme
Uncertainties of climate projections are routinely assessed by considering simulations from different models. Observations are used to evaluate models, yet there is a debate about whether and how to explicitly weight model projections by agreement with observations. Here we present a straightforward weighting scheme that accounts both for the large differences in model performance and for model interdependencies, and we test reliability in a perfect model setup. We provide weighted multimodel projections of Arctic sea ice and temperature as a case study to demonstrate that, for some questions at least, it is meaningless to treat all models equally. The constrained ensemble shows reduced spread and a more rapid sea ice decline than the unweighted ensemble. We argue that the growing number of models with different characteristics and considerable interdependence finally justifies abandoning strict model democracy, and we provide guidance on when and how this can be achieved robustly.
54 ENVIRONMENTAL SCIENCES↗
A Taylor Expansion-Based Adaptive Design Strategy for Global Surrogate Modeling With Applications in Groundwater Modeling
Global sensitivity analysis (GSA) and uncertainty quantification (UQ) for groundwater modeling are challenging because of the model complexity and significant computational requirements. To reduce the massive computational cost, a cheap-to-evaluate surrogate model is usually constructed to approximate and replace the expensive groundwater models in the GSA and UQ. Constructing an accurate surrogate requires actual model simulations on a number of parameter samples. Thus, a robust experimental design strategy is desired to locate informative samples so as to reduce the computational cost in surrogate construction and consequently to improve the efficiency in the GSA and UQ. In this study, we develop a Taylor expansion-based adaptive design (TEAD) that aims to build an accurate global surrogate model with a small training sample size. TEAD defines a novel hybrid score function to search informative samples, and a robust stopping criterion to terminate the sample search that guarantees the resulted approximation errors satisfy the desired accuracy. The good performance of TEAD in building global surrogate models is demonstrated in seven analytical functions with different dimensionality and complexity in comparison to two widely used experimental design methods. The application of the TEAD-based surrogate method in two groundwater models shows that the TEAD design can effectively improve the computational efficiency of GSA and UQ for groundwater modeling.
58 GEOSCIENCES↗
Enhancing occupant behavior representation for interoperability between building information modeling and building energy modeling
Building Performance Simulation (BPS) has been adopted as an essential tool for designing, operating, and retrofitting buildings to optimize energy efficiency throughout the building life cycle. The Green Building XML (gbXML) schema facilitates seamless data exchange between Building Information Modeling (BIM) and Building Energy Modeling (BEM) software tools. However, limited occupant behavior (OB) representation in BIM often leads to inconsistent and inaccurate energy simulation in BEM software. This paper presents 154 systematic enhancements to the existing occupant behavior XML (obXML) schema v1.3.4, initially developed for standardizing OB representation for BEM, to address existing limitations and improve interoperability with BIM models. The enhancements encompass improved integration with BIM models through extended building representations and system operations, expanded support for advanced OB models with additional environmental parameters and mathematical capabilities, and implementation of a standardized model documentation framework. To facilitate seamless data transformation between gbXML and obXML schemas, we developed a publicly available gb-obXML Schema Converter. Three case studies demonstrate the enhanced schema’s capabilities: representation of building information using a two-story office building model, documentation of a window operation behavior model, and validation of the schema converter’s functionality. The enhanced obXML schema v1.4 enables sophisticated modeling of occupant-building interactions while maintaining consistency with industry-standard BIM schemas. The standardized documentation framework facilitates reproducibility and knowledge sharing in the OB research community, while the schema converter automates the integration of building information into OB simulation workflows. These enhancements establish a foundation for more accurate building performance simulation by supporting sophisticated representation of occupant behavior within the BIM-to-BEM simulation workflows.
Chung, Jihoon↗
Knowledge brokering on emissions modelling in Strategic Environmental Assessment of Estonian energy policy with special reference to the LEAP model
Strategic Environmental Assessment (SEA) serves as a platform for bringing together researchers, policy developers and other stakeholders to evaluate and communicate significant environmental and socio-economic effects of policies, plans and programmes. Quantitative computer models can facilitate knowledge exchange between various parties that strive to use scientific findings to guide policy-making decisions. The process of facilitating knowledge generation and exchange, i.e. knowledge brokerage, has been increasingly explored, but there is not much evidence in the literature on how knowledge brokerage activities are used in full cycles of SEAs which employ quantitative models. We report on the SEA process of the national energy plan with reflections on where and how the Long-range Energy Alternatives Planning (LEAP) model was used for knowledge brokerage on emissions modelling between researchers and policy developers. Our main suggestion is that applying a quantitative model not only in ex ante, but also ex post scenario modelling and associated impact assessment can facilitate systematic and inspiring knowledge exchange process on a policy problem and capacity building of participating actors. - Highlights: • We examine the knowledge brokering on emissions modelling between researchers and policy developers in a full cycle of SEA. • Knowledge exchange process can evolve at any modelling stage within SEA. • Ex post scenario modelling enables systematic knowledge exchange and learning on a policy problem.
54 ENVIRONMENTAL SCIENCES↗
Enhancement of phase change material hysteresis model: A case study of modeling building envelope in EnergyPlus
Nowadays, buildings are expected to offer demand side services to the power grid to enhance the electrical load flexibility, which leads to the concepts of grid-interactive efficient buildings (GEBs). Phase change material (PCM)-based thermal energy storage has seen increasing attention in recent years for peak load shifting of grid-interactive efficient buildings (GEBs). Numerical models are critical tools for design and evaluation of PCM-integrated systems. Most industrial-grade PCMs are reported to melt/freeze over a temperature range instead of at a unique temperature. Such thermal hysteresis effect significantly affects the reliability of simulation results because not only the heat transfer process depends on melting and freezing temperatures, the PCM thermal properties change significantly during the phase change process as well. This study is aimed to develop a model for the PCMs used in the building envelope with the capability to accurately simulate hysteretic behaviors. Further, this model is based on a two-phase assumption and is implemented in a whole building energy performance simulation program (i.e., EnergyPlus). A comparison between numerical results and experimental data shows that during a complete phase transition, the two-phase model could achieve a good agreement with the experimental data. During a partial phase transition, the two-phase model could lead to significant improvements compared to other alternative PCM models, including the existing PCM model in EnergyPlus. Last, whole building simulations were performed to study this model's performance regarding heating/cooling loads and zone mean air temperature of a given building. The results show that the difference in hourly heating/cooling loads introduced by the models was less than 1% in design conditions, while significant changes were observed in both hourly heating/cooling loads and zone mean air temperature when the PCM envelope underwent partial phase transition processes.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
Experimental measurement and numerical modeling of the effective thermal conductivity of TRISO fuel compacts
Not Available
Folsom, Charles↗
A priori analysis of a power-law sub-filter scale mixing model for transported PDF modeling of high Karlovitz turbulent premixed flames
Accurate modeling of mixing in large-eddy simulation (LES) / transported probability density function (PDF) modeling of turbulent combustion remains an outstanding issue. The issue is particularly salient in turbulent premixed combustion under extreme conditions such as high-Karlovitz number Ka. Here, the present study addresses this issue by conducting an a priori analysis of a power-law scaling based mixing timescale model for the transported PDF model. A recently produced DNS dataset of a high-Ka turbulent jet flame is used for the analysis. A power-law scaling is observed for a scaling factor used to model the sub-filter scale mixing timescale in this high-Ka turbulent premixed DNS flame when the LES filter size is much greater than the characteristic thermal thickness of a laminar premixed flame. The sensitivity of the observed power-law scaling to the different viewpoints (local or global) and to the different scalars for the data analysis is examined and the dependence of the model parameters on the dimensionless numbers Ka and Re (the Reynolds number) is investigated. Different model formulations for the mixing timescale are then constructed and assessed in the DNS flame. The proposed model is found to be able to reproduce the mixing timescale informed by the high-Ka DNS flame significantly better than a previous model.
42 ENGINEERING↗
A quantitative assessment of the model form error of friction models across different interface representations for jointed structures
Hysteretic models are widely used to model frictional interactions in joints to recreate experimental behavior. However, it is unclear which models are best suited for fitting or predicting the responses of structures. Here, the present study evaluates 26 friction model/interface representation combinations to quantify the model form error. A Quasi-Static Modal Analysis approach (termed Rayleigh Quotient Nonlinear Modal Analysis) is adopted to calculate the nonlinear system response, and a Multi-Objective Optimization is solved to fit experimental data of the first mode of the Brake-Reuß Beam. Optimized parameters from the first mode are applied to the second and third bending modes to quantify the predictive ability of the models. Formulations for both tracing full hysteresis loops and recreating hysteresis loops from a single loading curve (Masing assumptions) are considered. Smoothly varying models applied to a five patch representation showed the highest flexibility (for fitting mode 1) and good predictive potential (for modes 2 and 3). For a second formulation, which uses 152 frictional elements to represent the interface, the physically motivated spring in series with a Coulomb slip model (elastic dry friction) has high error for fitting mode 1 and performs near the middle for predicting higher modes. For both interface representation, the best fit models are not the most physical, but rather the ones with the most parameters (as expected); however, the more physical models perform somewhat better for predicting the higher modes.
42 ENGINEERING↗
Multiscale Modeling of a Direct Nonoxidative Methane Dehydroaromatization Reactor with a Validated Model for Catalyst Deactivation
Due to the recent boom in shale gas production, aromatics production using direct nonoxidative methane dehydroaromatization (DHA) is being investigated extensively. However, due to rapid coke formation, catalysts in the nonoxidative methane DHA reactors get deactivated, which is one of the critical issues for the commercial success of the methane DHA process. In this paper, a model for catalyst deactivation is developed. Rate models for other DHA reactions are developed by considering the decrease in the catalyst activity with time. Due to the very fast coke formation rate on the fresh catalyst, there is coke formation immediately upon the introduction of the feed. Therefore, an algorithm is developed for estimation of the initial state of the reactor and the kinetic parameters by coupling an iterative direct substitution approach with an optimization approach. Transient experimental data from an in-house reactor are first reconciled and then used for developing the kinetic model including the coke formation model. Using the rate model, a dynamic, heterogeneous, multiscale reactor model with embedded heating is developed. Here, the model couples the catalyst pellet level model with a reactor level model. Impacts of temperature, L/D ratio, and scheduling of reactors on variability in conversion and yield with time are studied.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Coupled model intercomparison project phase 6 (CMIP6) high resolution model intercomparison project (HighResMIP) bias in extreme rainfall drives underestimation of amazonian precipitation
Abstract Extreme rainfall events drive the amount and spatial distribution of rainfall in the Amazon and are a key driver of forest dynamics across the basin. This study investigates how the 3-hourly predictions in the High Resolution Model Intercomparison Project (HighResMIP, a component of the recent Coupled Model Intercomparison Project, CMIP6) represent extreme rainfall events at annual, seasonal, and sub-daily time scales. TRMM 3B42 (Tropical Rainfall Measuring Mission) 3 h data were used as observations. Our results showed that eleven out of seventeen HighResMIP models showed the observed association between rainfall and number of extreme events at the annual and seasonal scales. Two models captured the spatial pattern of number of extreme events at the seasonal and annual scales better (higher correlation) than the other models. None of the models captured the sub-daily timing of extreme rainfall, though some reproduced daily totals. Our results suggest that higher model resolution is a crucial factor for capturing extreme rainfall events in the Amazon, but it might not be the sole factor. Improving the representation of Amazon extreme rainfall events in HighResMIP models can help reduce model rainfall biases and uncertainties and enable more reliable assessments of the water cycle and forest dynamics in the Amazon.
54 ENVIRONMENTAL SCIENCES↗
Exploring the use of novel programming models in land surface models
A wide range of programming models are currently under rapid development to meet the needs of application developers looking to work on more complex machines. These models fill a variety of roles. Some look to abstract supercomputer architecture, including both processors and memory, to present a strategy for portable performance across a wide range of machines. Others look to expose concurrency by explicitly constructing task-driven dependency graphs that allow a scheduler to find parallelism. Here we explore the implications for application codes of adopting two such programming models, Kokkos and Legion, one from each class of models. We specifically focus on the software design implications on refactoring existing applications, rather than the performance and performance tuning of these models. We identify a strategy for refactoring the Energy Exascale Earth System Model's Land Surface Model, an extremely complex code for climate applications, and prototype a series of mini-apps that explore the adoption of Kokkos and Legion. In doing this, we identify commonalities across the models, leading to a series of conclusions about application software design and refactoring for the adoption of novel programming models.
Coon, Ethan↗
TU-AB-BRC-04: Commissioning of a New MLC Model for the GEPTS Monte Carlo System: A Model Based On the Leaf and Interleaf Effective Density
Purpose: To commission a new MLC model for the GEPTS Monte Carlo system. The model is based on the concept of leaves and interleaves effective densities Methods: GEPTS is a Monte Carlo system to be used for external beam planning verification. GEPTS incorporates detailed photon and electron transport algorithms (Med.Phys. 29, 2002, 835). A new GEPTS model for the Varian Millennium MLC is presented. The model accounts for: 1) thick (1 cm) and thin (0.5 cm) leaves, 2) tongue-and-groove design, 3) High-Transmission (HT) and Low-Transmission (LT) interleaves, and 4) rounded leaf end. Leaf (and interleaf) height is set equal to 6 cm. Instead of modeling air gaps, screw holes, and complex leaf heads, “effective densities” are assigned to: 1) thin leaves, 2) thick leaves, 3) HT-, and 4) LT-interleaves. Results: The new MLC model is used to calculate dose profiles for Closed-MLC and Tongue-and-Groove fields at 5 cm depth for 6, 10 and 15 MV Varian beams. Calculations are compared with 1) Pin-point ionization chamber transmission ratios and 2) EBT3 Radiochromic films. Pinpoint readings were acquired beneath thick and thin leaves, and HT and LT interleaves. The best fit of measured dose profiles was obtained for the following parameters: Thick-leaf density = 16.1 g/cc, Thin-leaf density = 17.2 g/cc; HT Interleaf density = 12.4 g/cc, LT Interleaf density = 14.3 g/cc; Interleaf thickness = 1.1 mm. Attached figures show comparison of calculated and measured transmission ratios for the 3 energies. Note this is the only study where transmission profiles are compared with measurements for 3 different energies. Conclusion: The new MLC model reproduces transmission measurements within 0.1%. The next step is to implement the MLC model for real plans and quantify the improvement in dose calculation accuracy gained using this model for IMRT plans with high modulation factors.
60 APPLIED LIFE SCIENCES↗
Modeling the Potential Effects of New Tobacco Products and Policies. A Dynamic Population Model for Multiple Product Use and Harm
Background Recent declines in US cigarette smoking prevalence have coincided with increases in use of other tobacco products. Multiple product tobacco models can help assess the population health impacts associated with use of a wide range of tobacco products. Methods and Findings We present a multi-state, dynamical systems population structure model that can be used to assess the effects of tobacco product use behaviors on population health. The model incorporates transition behaviors, such as initiation, cessation, switching, and dual use, related to the use of multiple products. The model tracks product use prevalence and mortality attributable to tobacco use for the overall population and by sex and age group. The model can also be used to estimate differences in these outcomes between scenarios by varying input parameter values. We demonstrate model capabilities by projecting future cigarette smoking prevalence and smoking-attributable mortality and then simulating the effects of introduction of a hypothetical new lower-risk tobacco product under a variety of assumptions about product use. Sensitivity analyses were conducted to examine the range of population impacts that could occur due to differences in input values for product use and risk. We demonstrate that potential benefits from cigarette smokers switching to the lower-risk product can be offset over time through increased initiation of this product. Model results show that population health benefits are particularly sensitive to product risks and initiation, switching, and dual use behaviors. Conclusion Our model incorporates the variety of tobacco use behaviors and risks that occur with multiple products. As such, it can evaluate the population health impacts associated with the introduction of new tobacco products or policies that may result in product switching or dual use. Further model development will include refinement of data inputs for non-cigarette tobacco products and inclusion of health outcomes such as morbidity and disability.
59 BASIC BIOLOGICAL SCIENCES↗
HVDC Macrogrid Modeling for Power-flow and Transient Stability Studies in North American Continental-Level Interconnections
High Voltage Direct Current (HVDC) transmission lines are being constructed throughout the world, aided by advancements in power electronics and the potential value to transfer power between distant areas and off-shore locations. Multiple HVDC lines within and across large AC interconnections could bring about economic benefits such as interregional capacity exchange, and transfer of low-cost, distant electric energy directly to load centers. In addition, network configuration of HVDC lines could result in additional benefits that have not been deeply studied. This paper describes the modeling process for continental-level power system interconnections with the addition of multiple HVDC lines configured as a macrogrid. The models used for study are based on industry-accepted power-flow and dynamic system models for the North American Eastern and Western Interconnections. The model provides insight on feasibility and initial steady-state and stability tests of the HVDC macrogrid and its interactions with the existing electricity infrastructure, opening the door to analysis of the technical value of such a macrogrid.
HVDC transmission, North American Power Grids, AC ↗
Incorporation of the HYbrid Coordinate Ocean Model (HYCOM) into the Community Climate System Model (CCSM): Evaluation and Climate Applications (Final Report for DOE Grant DE-FG02-07ER64470)
The primary goal of the project entitled “Incorporation of the HYbrid Coordinate Ocean Model (HYCOM) into the Community Climate System Model (CCSM): Evaluation and Climate Applications” was to systematically investigate the performance of the HYbrid Coordinate Ocean Model (HYCOM) as an alternative oceanic component of the NCAR’s Community Climate System Model (CCSM). We have configured two versions of the fully coupled CCSM3/HYCOM: one with a medium resolution (T42) Community Atmospheric Model (CAM) and the other with higher resolution (T85). We have performed a comprehensive analysis of the 400-year fully coupled CCSM3/HYCOM simulations and compared the results with those from CCSM3/POP and with climatological observations, and also we have performed tuning of critical model parameters, including Smagorinsky viscosity, isopycnal diffusivity, and background vertical diffusivity. The analysis shows that most oceanic features are well represented in the CCSM3/HYCOM. The coupled CCSM3/HYCOM (T42) has been integrated for 400 years, and the results have been archived and transferred to the High Performance Computer in the Florida State Univesity. In the last year, we have made comprehensive diagnostics of the long-term simulations by the comparison with the original CCSM3/POP simulation and with the observations. To gain some understanding of the model biases, the mean climate and modes of climate variability of the two models are compared with observations. The examination includes the Northern and Southern Annular Modes (NAM and SAM), the Pacific-North-American (PNA) pattern, the Atlantic Multidecadal Oscillation (AMO), and the main Southern Ocean SST mode. We also compared the performance of ENSO simulation in the coupled models. This report summarizes the main findings from the comparison of long-term CCSM3/HYCOM and CCSM3/POP simulations.
54 ENVIRONMENTAL SCIENCES↗
FINAL REPORT: Mechanistically-Base Field Scale Models of Uranium Biogeochemistry from Upscaling Pore-Scale Experiments and Models
Biogeochemical reactive transport processes in the subsurface environment are important to many contemporary environmental issues of significance to DOE. Quantification of risks and impacts associated with environmental management options, and design of remediation systems where needed, require that we have at our disposal reliable predictive tools (usually in the form of numerical simulation models). However, it is well known that even the most sophisticated reactive transport models available today have poor predictive power, particularly when applied at the field scale. Although the lack of predictive ability is associated in part with our inability to characterize the subsurface and limitations in computational power, significant advances have been made in both of these areas in recent decades and can be expected to continue. In this research, we examined the upscaling (pore to Darcy and Darcy to field) the problem of bioremediation via biofilms in porous media. The principle idea was to start with a conceptual description of the bioremediation process at the pore scale, and apply upscaling methods to formally develop the appropriate upscaled model at the so-called Darcy scale. The purpose was to determine (1) what forms the upscaled models would take, and (2) how one might parameterize such upscaled models for applications to bioremediation in the field. We were able to effectively upscale the bioremediation process to explain how the pore-scale phenomena were linked to the field scale. The end product of this research was to produce a set of upscaled models that could be used to help predict field-scale bioremediation. These models were mechanistic, in the sense that they directly incorporated pore-scale information, but upscaled so that only the essential features of the process were needed to predict the effective parameters that appear in the model. In this way, a direct link between the microscale and the field scale was made, but the upscaling process helped inform potential users of the model what kinds of information would be needed to accurately characterize the system.
42 ENGINEERING↗