Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MICROSPHERES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Solubility and release of fenbufen intercalated in Mg, Al and Mg, Al, Fe layered double hydroxides (LDH): The effect of Eudragit S 100 covering

Following different preparation routes, fenbufen has been intercalated in the interlayer space of layered double hydroxides with Mg{sup 2+} and Al{sup 3+} or Mg{sup 2+}, Al{sup 3+} and Fe{sup 3+} in the layers. Well crystallized samples were obtained in most of the cases (intercalation was not observed by reconstruction of the MgAlFe matrix), with layer heights ranging between 16.1 and 18.8 A. The presence of the LDH increases the solubility of fenbufen, especially when used as a matrix. The dissolution rate of the drug decreases when the drug is intercalated, and is even lower in those systems containing iron; release takes place through ionic exchange with phosphate anions from the solution. Preparation of microspheres with Eudragit S 100 leads to solids with an homogeneous, smooth surface with efficient covering of the LDH surface, as drug release was not observed at pH lower than 7. - Graphical abstract: LDHs containing Mg, Al, Fe increase fenbufen solubility, release takes place through ionic exchange with phosphate anions from the medium. Spherical solids with homogeneous, smooth surface are formed when using Eudragit S 100, efficiently covering the LDH surface. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile synthesis of hierarchical hollow ε-MnO{sub 2} spheres and their application in supercapacitor electrodes

The hierarchical hollow microspheres of ε-MnO{sub 2} have been synthesized through a facile chemical method at room temperature followed by selective removal of manganese carbonate structures with HCl. The microstructure and morphologies of the resulting materials are investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The results indicate that the product obtained by simple reaction for 3 min has a porous shell with excellent permeability and uniform pore-size distribution. Electrochemical properties were characterized by cyclic voltammetry, galvanostatic charge/discharge and impedance spectra. As a result, the hierarchical hollow ε-MnO{sub 2} showed the specific capacitance of 115 F g{sup −1} at 0.5 A g{sup −1}. These results demonstrate that the ε-MnO{sub 2} as electrode materials have potential application for high-performance supercapacitors. - Graphical abstract: The MnO{sub 2} shell with MnCO{sub 3} intermediate core is prepared at room temperature; the hollow structure with excellent permeated shell enhanced the discharge capacity and electrochemical stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Ni chains induced by self-generated magnetic field

Ultrafine chain-like Ni assemblies with a length of about 5 {mu}m were successfully prepared by the reduction of Ni salts with hydrazine hydrate under normal pressure in the absence of any inorganic or organic templates. The resulting Ni chains were characterized by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). Moreover, the growth process of the Ni chains was investigated for the first time, using transmission electron microscopy (TEM) and XRD as well, which is valuable to study the self-assembly mechanism of magnetic nanocrystallites. Results indicated that the novel chain-like Ni assemblies were integrated from Ni microspheres with a diameter of about 250 nm. Magnetic hysteresis measurement revealed that the Ni chains showed ferromagnetic behavior with a saturation magnetization of 15.07 emu/g and a coercivity of 115.1 Oe at room temperature. It was supposed that the self-generated magnetic field could induce the formation of the Ni chains.

36 MATERIALS SCIENCE↗

Shape evolution of Eu-doped Bi{sub 2}WO{sub 6} and their photocatalytic properties

Highlights: • Hydrothermal synthesis of Eu-doped Bi{sub 2}WO{sub 6} micro/nanostructure without any additives. • Dopant and doping level affect the shape evolution and photocatalytic activities. • Eu-doped Bi{sub 2}WO{sub 6} exhibit superior photocatalytic activity in degradation of RhB. - Abstract: Europium-doped bismuth tungstate (Eu-doped Bi{sub 2}WO{sub 6}) was synthesized via hydrothermal method. The composition, structure, and microstructure of the products were characterized by X-ray diffraction and scanning electron microscopy. Depending on the doping level, nanoflakes and 3D hierarchical microspheres were formed. The photocatalytic activities of all products obtained were evaluated by the degradation of Rhodamine-B under visible light irradiation. A substantially improved photocatalytic performance of Eu-doped Bi{sub 2}WO{sub 6} is achieved. This study demonstrates a simple method that could produce stable photocatalysts with greatly enhanced performance.

36 MATERIALS SCIENCE↗

Nitrogen-doped hollow carbon nanospheres for highly sensitive electrochemical sensing of nitrobenzene

Highlights: • NHCPs were prepared using MSM as a template and PDA as carbon and nitrogen precursor. • NHCPs-750 with high content of pyrindinic N showed good electrocatalytic performance. • A sensitive electrochemical sensor for NB was developed based on the NHCPs-750–GCE. - Abstract: Following hard template method, nitrogen–doped hollow carbon nanospheres (NHCPs) were successfully prepared by using monodisperse silica microspheres as a template and dopamine as carbon and nitrogen precursor. A series of NHCPs-x samples with different pyrolysis temperatures were reported. The composite material formation was characterized by detailed methods (e.g., X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy and transmission electron microscopy). Results indicated that NHCPs treated at 750 °C with highest amounts of pyrindinic N showed improved electro-catalytic activity for nitrobenzene (NB) in neutral solution. NHCPs-750 can be developed as an effective sensing platform for the detection of NB, which showed high activity and superior analytical performance, such as a wide linear range of 5–2610 μM, a high sensitivity of 436 μAmM{sup −1}, and a low limit of detection of 2.29 μM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of the synergistic effect between slow photons and electron trapping on the photocatalytic properties of TiO2 photonic crystals

Highlights: • We report the preparation of titanium dioxide photonic crystals (PCs) having two pore sizes. • Electronic band gap (BG) and photonic band gap (PBG) were determined with the use of UV–vis spectroscopy. • The position of PBG was affected by the pore size of PC. • Metallic silver (electron trapping centers) were generated on the surface of both types of PCs by a photoreduction of silver Ag{sup +} ions. • Photocatalytic properties of silver-modified TiO{sub 2} photonic crystals were enhanced by synergistic effect caused by overlapping the edges of PBG and BG combined with electron trapping by AgNPs. - Abstract: Titanium dioxide photonic crystals (PCs) were obtained using the sol-gel method and polystyrene (PS) microspheres as a template with two different diameters: 300 nm and 460 nm. The resulting materials were labeled as PC-300 and PC-460. In the following step, PCs were modified with silver nanoparticles (AgNPs) generated by the photoreduction of silver Ag{sup +} ions. The obtained PCs were denoted as AgNPs/PC-300 and AgNPs/PC-460. The size of the AgNPs were 28 nm ± 2 nm for the AgNPs/PC-300 and 21 nm ± 1 nm for AgNPs/PC-460. The characteristic features of TiO{sub 2} PCs, such as electronic band gap (BG), photonic band gap (PBG) and an occurrence of slow photon effect (SPE), were determined with the use of UV–vis spectroscopy. The photocatalytic performance of the prepared PCs was defined by monitoring the photodegradation rates of Rhodamine B (RhB) measured in the presence of PC-300, PC-460, AgNPs/PC-300, AgNPs/PC-460 and non-porous TiO{sub 2} coating (NPC) as reference material. It was found that the appropriate utilization of SPE by overlapping the edge of PBG with semiconductor BG and electron trapping by the presence of AgNPs exerted a strong synergistic effect on the photocatalytic properties of AgNPs/PCs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microfluidic system for transmission electron microscopy

We present a microfluidic system that maintains liquid flow in a specimen chamber for (scanning) transmission electron microscope ((S)TEM) imaging. The specimen chamber consists of two ultra-thin silicon nitride windows supported by silicon microchips. They are placed in a specimen holder that seals the sample from the vacuum in the electron microscope, and incorporates tubing to and from the sample connected to a syringe pump outside the microscope. Using results obtained from fluorescence microscopy of microspheres flowing through the system, an equation to characterize the liquid flow through the system was calibrated. Gold nanoparticles of diameters of 30 and 100 nm moving in liquid were imaged with a 200 kV STEM. It was concluded that despite strong influences from Brownian motion, and sensitivity to small changes in the depth of the bypass channel, the electron microscopy flow data matched the calculated flow speed within an order of magnitude. The system allows for rapid (within a minute) liquid exchange, which can potentially be used, for example, to investigate the response of specimens, e.g., eukaryotic-, or bacterial cells, to certain stimuli.

99 GENERAL AND MISCELLANEOUS↗

Transparent Conductive Adhesives for Tandem Solar Cells Using Polymer-Particle Composites

Transparent conductive adhesives (TCAs) can enable conductivity between two substrates, which is useful for a wide range of electronic devices. Here, we have developed a TCA composed of a polymer-particle blend with ethylene-vinyl acetate as the transparent adhesive and metal-coated flexible poly(methyl methacrylate) microspheres as the conductive particles that can provide conductivity and adhesion regardless of the surface texture. This TCA layer was designed to be nearly transparent, conductive in only the out-of-plane direction, and of practical adhesive strength to hold the substrates together. The series resistance was measured at 0.3 and 0.8 O cm2 for 8 and 0.2% particle coverage, respectively, while remaining over 92% was transparent in both cases. For applications in photovoltaic devices, such as mechanically stacked multijunction III-V/Si cells, a TCA with 1% particle coverage will have less than 0.5% power loss due to the resistance and less than 1% shading loss to the bottom cell.

14 SOLAR ENERGY↗

Growth of Gold Nanosheets and Nanopolyhedra in Pyrrolidinium-Based Ionic Liquids: Investigation of the Cation Effect on the Resulting Morphologies

Large gold nanosheets and small gold polyhedra have been successfully synthesized in room-temperature ionic liquids (ILs) by an ionothermal reduction of HAuCl{sub 4} under N{sub 2} atmosphere, without using any additives. The effect of the organic cation on the final morphologies of the gold particles has been studied, and a series of pyrrolidinium-, imidazolium-, and quaternary amine-based ionic liquids have been investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD) measurements. Our results show that these ILs favor the anisotropic growth of gold by acting as template agents and that only gold microspheres can be obtained with the IL containing a reductive functionality.

36 MATERIALS SCIENCE↗

Aligned ZnO Nanorod Arrays Grown Directly on Zinc Foils and Zinc Spheres by a Low-Temperature Oxidation Method.

Vertically aligned, dense ZnO nanorod arrays were grown directly on zinc foils by a catalyst-free, low-temperature (450-500 C) oxidization method. The zinc foils remain conductive even after the growth of ZnO nanorods on its surface. The success of this synthesis largely relies on the level of control over oxygen introduction. By replacing zinc foils with zinc microspheres, unique and sophisticated urchin-like ZnO nanorod assemblies can be readily obtained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A complex plasma device of large surface area

A novel complex plasma device (YCOPEX) to create two-dimensional monolayer plasma crystals of a large surface area of 15x90 cm{sup 2} is described. The YCOPEX, in which a plasma is produced by a rf discharge of argon gas, is designed to utilize gravitational force to study fundamental physics of complex plasmas. The device may be used for observation of spatial change of a phase state, propagation of waves, and collisions of flowing dust particles with an obstacle. As an example of experiments, neutral drag forces on microspheres are measured using the gravitational force on those particles. The obtained neutral drag force agrees reasonably with the values estimated from Epstein's formula.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Melting transition in a two-dimensional complex plasma heated by driven acoustic instability

The melting transition in a two-dimensional complex (dusty) plasma is studied experimentally. A system consisting of {approx_equal}3900 microspheres is heated by amplitude modulating the rf discharge power with a square wave at the vertical resonance frequency. The vertical motion couples to an in-plane dust-acoustic instability at one-half the modulation frequency, thereby increasing the complex plasma's effective temperature. The 'thermodynamic' phase of the system is characterized for increasing levels of amplitude modulation at constant neutral pressure (35 mTorr Ar) and average rf power using the Lindemann ratio, defect density, bond-orientational correlation function, and pair correlation function. A melting transition showing evidence for an intermediate hexatic phase is observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Whispering Gallery Mode Spectroscopy as a Diagnostic for Dusty Plasmas

Whispering-gallery-mode spectroscopy is being assessed as a diagnostic method for the characterisation of size and chemical composition of spherical particles levitated in a plasma. With a pulsed laser whispering gallery modes (cavity resonances) are excited in individual microspheres leading to enhanced Raman scattering or fluorescence at characteristic wavelengths. This method can be used to gain specific information from the particle surface and is thus of great interest for the characterisation of layers deposited on microparticles, e.g. in molecular plasmas. We present investigations of different microparticles in air and results from fluorescent particles levitated in an Argon rf plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A two-dimensional lattice ion trap for quantum simulation

Quantum simulations of spin systems could enable the solution of problems that otherwise require infeasible classical resources. Such a simulation may be implemented using a well-controlled system of effective spins, such as a two-dimensional lattice of locally interacting ions. We propose here a layered planar rf trap design that can be used to create arbitrary two-dimensional lattices of ions. The design also leads naturally to ease of microfabrication. As a first experimental demonstration, we confine {sup 88}Sr{sup +} ions in a millimeter-scale lattice trap and verify numerical models of the trap by measuring the motional frequencies. We also confine 440 nm diameter charged microspheres and observe ion-ion repulsion between ions in neighboring lattice sites. Our design, when scaled to smaller ion-ion distances, is appropriate for quantum simulation schemes, e.g., that of Porras and Cirac [Phys. Rev. Lett. 92, 207901 (2004)]. We note, however, that in practical realizations of the trap, an increase in the secular frequency with decreasing ion spacing may make a coupling rate that is large relative to the decoherence rate in such a trap difficult to achieve.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accurate noncontact calibration of colloidal probe sensitivities in atomic force microscopy

The absolute force sensitivities of colloidal probes comprised of atomic force microscope, or AFM, cantilevers with microspheres attached to their distal ends are measured. The force sensitivities are calibrated through reference to accurate electrostatic forces, the realizations of which are described in detail. Furthermore, the absolute accuracy of a common AFM force calibration scheme, known as the thermal noise method, is evaluated. It is demonstrated that the thermal noise method can be applied with great success to colloidal probe calibration in air and in liquid to yield force measurements with relative standard uncertainties below 5%. Techniques to combine the electrostatics-based determination of the AFM force sensitivity with measurements of the colloidal probe's thermal noise spectrum to compute noncontact estimates of the displacement sensitivity and spring constant are also developed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurement of the force on microparticles in a beam of energetic ions and neutral atoms

The force on microparticles in an energetic ion beam is investigated experimentally. Hollow glass microspheres are injected into the vertically upward directed beam and their trajectories are recorded with a charge-coupled device camera. The net force on the particles is determined by means of the measured vertical acceleration. The resulting beam pressures are compared with Faraday cup measurements of the ion current density and calorimetric measurements of the beam power density. Due to the neutral gas background, the beam consists, besides the ions, of energetic neutral atoms produced by charge-exchange collisions. It is found that the measured composition of the drag force by an ion and a neutral atom component agrees with a beam model that takes charge-exchange collisions into account. Special attention is paid to the momentum contribution from sputtered atoms, which is shown to be negligible in this experiment, but should become measurable in case of materials with high sputtering yields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser-induced rocket force on a microparticle in a complex (dusty) plasma

The interaction of a focused powerful laser beam with micron-sized melamine formaldehyde (MF) particles was studied experimentally. The microspheres had a thin palladium coating on their surface and were suspended in a radio frequency argon plasma as a single layer (plasma crystal). A particle hit by the laser beam usually accelerated in the direction of the laser beam, consistent with the radiation pressure force mechanism. However, random-direction acceleration up to the speeds on the order 1 m/s was sometimes observed. Rocket-force mechanism is proposed to account for the random-direction acceleration. Similar, but much less pronounced, effect was also observed for MF particles without palladium coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology of Nano and Micro Fiber Structures in Ultrafine Particles Filtration

Selected procedures permitting to prepare homogeneous nanofibre structures of the desired morphology by employing a suitable combination of variables during the electrospinning process are presented. A comparison (at the same pressure drop) was made of filtration capabilities of planar polyurethane nanostructures formed exclusively by nanofibres, space polycarbonate nanostructures having bead spacers, structures formed by a combination of polymethyl methacrylate micro- and nanofibres and polypropylene meltblown microstructures, through which ultrafine particles of ammonium sulphate 20-400 nm in size were filtered. The structures studied were described using a new digital image analysis technique based on black and white images obtained by scanning electron microscopy. More voluminous structures modified with distance microspheres and having a greater thickness and mass per square area of the material, i.e. structures possessing better mechanical properties, demanded so much in nanostructures, enable preparation of filters having approximately the same free volume fraction as flat nanofibre filters but an increased effective fibre surface area, changed pore size morphology and, consequently, a higher filter quality.

36 MATERIALS SCIENCE↗