Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Towards higher stability of resonant absorption measurements in pulsed plasmas

Possible ways to increase the reliability of time-resolved particle density measurements in pulsed gaseous discharges using resonant absorption spectroscopy are proposed. A special synchronization, called “dynamic source triggering,” between a gated detector and two pulsed discharges, one representing the discharge of interest and another being used as a reference source, is developed. An internal digital delay generator in the intensified charge coupled device camera, used at the same time as a detector, is utilized for this purpose. According to the proposed scheme, the light pulses from the reference source follow the gates of detector, passing through the discharge of interest only when necessary. This allows for the utilization of short-pulse plasmas as reference sources, which is critical for time-resolved absorption analysis of strongly emitting pulsed discharges. In addition to dynamic source triggering, the reliability of absorption measurements can be further increased using simultaneous detection of spectra relevant for absorption method, which is also demonstrated in this work. The proposed methods are illustrated by the time-resolved measurements of the metal atom density in a high-power impulse magnetron sputtering (HiPIMS) discharge, using either a hollow cathode lamp or another HiPIMS discharge as a pulsed reference source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrical transport in hydrogen-aluminium Co-doped ZnO and Zn{sub 1-x}Mg{sub x}O films: Relation to film structure and composition

ZnO:Al and Zn{sub 1-x}Mg{sub x}O:Al films have been deposited in Ar/H{sub 2} atmospheres by magnetron sputtering from oxidic targets at two substrate temperatures: room temperature and 300 Degree-Sign C. The electrical transport parameters-carrier concentration, resistivity, and Hall mobility-have been measured and related to the structural properties and the chemical composition. The resistivity {rho} both of ZnO:Al as well as Zn{sub 1-x}Mg{sub x}O:Al films decreases with increasing hydrogen flow for the films deposited at room temperature. The decrease is up to 2 orders of magnitude and in both cases due to an increase of the electron concentration and the Hall mobility and occurred despite the fact, that the films became almost X-ray amorphous with increasing hydrogen content. In contrast to these results, for depositions at 300 Degree-Sign C, the resistivity increases with increasing hydrogen portion in the sputtering atmosphere, more strongly for the Zn{sub 1-x}Mg{sub x}O:Al films (3 orders of magnitude). Based on literature data, it is concluded that the built-in atomic hydrogen acts as a shallow donor at low deposition temperatures, while it becomes deactivated at T{sub sub}= 300 Degree-Sign C by the formation of molecular H{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Morphology dependent electrochemical performance of sputter deposited Sn thin films

Graphical abstract: Smooth homogenous anode surface results in better electrochemical performance in terms of capacity and cycle life. Highlights: ► Controlling rate of deposition of Sn thin films for different surface morphology. ► Higher deposition rate results in poor capacity retention. ► Lower deposition rate of 0.25 nm s{sup −1} helps in higher capacity retention. ► Electrochemical performance correlated homogeneity and interparticle contact area. -- Abstract: This study deals with tailoring of the surface morphology, microstructure, and electrochemical properties of Sn thin films deposited by magnetron sputtering with different deposition rates. Scanning electron microscopy and atomic force microscopy are used to characterize the film surface morphology. Electrochemical properties of Sn thin film are measured and compared by cyclic voltammetry and charge–discharge cycle data at a constant current density. Sn thin film fabricated with a higher deposition rate exhibited an initial discharge capacity of 798 mAh g{sup −1} but reduced to 94 mAh g{sup −1} at 30th cycle. Film deposited with lower deposition rate delivered 770 mAh g{sup −1} during 1st cycle with improved capacity retention of 521 mAh g{sup −1} on 30th cycle. Comparison of electrochemical performances of these films has revealed important distinctions, which are associated with the surface morphology and hence on rate of deposition.

36 MATERIALS SCIENCE↗

Effects of high-temperature thermal annealing on the electronic properties of In-Ga-Zn oxide thin films

Indium gallium zinc oxide (IGZO) thin films were deposited by radio-frequency magnetron sputtering at room-temperature. Then, thermal annealing was conducted to improve the structural ordering. X-ray diffraction and high-resolution transmission electron microscopy demonstrated that the as-deposited IGZO thin films were amorphous and crystallization occurred at 800 and 950 °C. As a result of crystallization at high temperature, the carrier concentration and the Hall mobility of IGZO thin films were sharply increased, which could be ascribed to the increased oxygen vacancies and improved structural ordering of the thin films.

36 MATERIALS SCIENCE↗

Structural Changes in Si–CuSi Films upon Intercalation of Lithium Ions

We studied the possibility of using composite films representing amorphous silicon reinforced with crystalline inclusions of copper silicide as an anode material for lithium-ion batteries with liquid electrolyte. The films were made by layer-by-layer magnetron sputtering of amorphous silicon and copper, followed by low-temperature (100–200°C) annealing of the structure. The tests of the anodes revealed the effect of prolonged intense growth of their reversible capacity. To describe the effect, a phenomenological model based on the multidirectional migration of silicon and copper atoms in an inhomogeneous field of elastic mechanical stresses arising during electrode cycling is proposed.

30 DIRECT ENERGY CONVERSION↗

Condensation Surface Temperature as a Means for Studying Film Formation Mechanisms

A rise in the condensation surface temperature during film growth is a result of energy dissipation on the condensation surface. An example of energy dissipation is the dissipation of chemical reaction heat, which releases during film deposition by reactive magnetron sputtering. The monitoring of the surface temperature during TiN film deposition by reactive (Ti–in–N{sub 2}) and nonreactive (TiN–in–Ar or TiN–in–N{sub 2}) sputtering methods has shown that this temperature is higher in the reactive case and decreases in the (TiN–in–Ar)–(TiN–in–N{sub 2}) sequence of nonreactive sputtering modifications. It has been found that the composition and crystal structure of TiN films do not depend on the growth method and are identical to those of bulk titanium nitride. Based on these results, a formation mechanism of films obtained by the above methods has been suggested. In the case of reactive sputtering, the film was supposed to grow on the condensation surface through a reaction between titanium and nitrogen atoms. In the cases of nonreactive sputtering, the film forms from TiN molecules.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Technique for forming ITO films with a controlled refractive index

A new method for fabricating transparent conducting coatings based on indium-tin oxide (ITO) with a controlled refractive index is proposed. This method implies the successive deposition of material by electron-beam evaporation and magnetron sputtering. Sputtered coatings with different densities (and, correspondingly, different refractive indices) can be obtained by varying the ratio of the mass fractions of material deposited by different methods. As an example, films with effective refractive indices of 1.2, 1.4, and 1.7 in the wavelength range of 440–460 nm are fabricated. Two-layer ITO coatings with controlled refractive indices of the layers are also formed by the proposed method. Thus, multilayer transparent conducting coatings with desired optical parameters can be produced.

36 MATERIALS SCIENCE↗

Synergy on catalytic effect of Fe-Zr additives mixed in different proportions on the hydrogen desorption from MgH{sub 2}

Mg films with mixed Fe and Zr metallic additives were prepared by rf magnetron sputtering keeping the total metal content constant, about 7 at. %, and changing the [Fe]/[Zr] ratio. Isothermal hydrogen desorption curves showed that the kinetics depends on [Fe]/[Zr] ratio and is fastest when the [Fe]/[Zr] ratio is {approx}1.8. X-ray diffraction analysis revealed formation of Fe nanoclusters and Mg grain refinement. The improvement of the hydrogen desorption kinetics can be explained by the presence of atomically dispersed Zr and Fe nanoclusters acting as nucleation centers, as well as Mg grain refinement.

36 MATERIALS SCIENCE↗

Extracting the effective mass of electrons in transparent conductive oxide thin films using Seebeck coefficient

A method is proposed that combines Seebeck coefficient and carrier concentration to determine the electron effective mass of transparent conductive oxide (TCO) thin films. Experiments were conducted to test the validity of this approach on the transparent conductive Ga-doped ZnO thin films deposited by magnetron sputtering. An evident agreement of the calculated electron effective mass of the films is observed between the proposed approach and the previous studies. Besides, the optical carrier concentration and mobility derived from the calculated electron effective mass and spectroscopic ellipsometry using a complex dielectric function are consistent with those from direct Hall-effect measurement. The agreements suggest that Seebeck coefficient can serve as an alternative tool for extracting the effective mass of electrons in TCO films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled nanoporous Pt morphologies by varying deposition parameters

Typically, dealloying of an alloy can result in an open cell nanoporous structure of the least electrochemically active element. Here, we show that a wider range of nanoporous structures is possible by controlling the composition and deposition parameters of the as-synthesized alloy as a way to provide sites for preferential etching. We demonstrate this by synthesizing nanoporous platinum (np-Pt) through electrochemical dealloying in aqueous HF from co-sputtered Pt{sub x}Si{sub 1-x} amorphous films. For increased Pt fraction of the amorphous alloy, silicon dissolution is favored along pre-existing features of the amorphous film (e.g. column boundaries or surface asperities). The resulting np-Pt depends on the manner in which silicon is preferentially removed. In addition to the expected isotropic open cell structure, columnar and Voronoi (radial) np-Pt are observed. A processing-structure map is developed to correlate np-Pt morphology to the initial composition and thickness of the amorphous Pt{sub x}Si{sub 1-x} film and the negative substrate bias used in magnetron sputtering.

36 MATERIALS SCIENCE↗

Highly textured Sr, Nb co-doped BiFeO{sub 3} thin films grown on SrRuO{sub 3}/Si substrates by rf- sputtering

In this study, (011)-highly oriented Sr, Nb co-doped BiFeO{sub 3} (BFO) thin films were successfully grown on SrRuO{sub 3}/Si substrates by rf-magnetron sputtering. The presence of parasite magnetic phases was ruled out based on the high resolution x-ray diffraction data. BFO films exhibited a columnar-like grain growth with rms surface roughness values of {approx_equal}5.3 nm and average grain sizes of {approx_equal}65-70 nm for samples with different thicknesses. Remanent polarization values (2P{sub r}) of 54 {mu}C cm{sup -2} at room temperature were found for the BFO films with a ferroelectric behavior characteristic of an asymmetric device structure. Analysis of the leakage mechanisms for this structure in negative bias suggests Schottky injection and a dominant Poole-Frenkel trap-limited conduction at room temperature. Oxygen vacancies and Fe{sup 3+}/Fe{sup 2+} trap centers are consistent with the surface chemical bonding states analysis from x-ray photoelectron spectroscopy data. The (011)-BFO/SrRuO{sub 3}/Si film structure exhibits a strong magnetic interaction at the interface between the multiferroic film and the substrate layer where an enhanced ferromagnetic response at 5 K was observed. Zero-field cooled (ZFC) and field cooled (FC) magnetization curves of this film system revealed a possible spin glass behavior at spin freezing temperatures below 30 K depending on the BFO film thickness.

36 MATERIALS SCIENCE↗

Identification of B-K near edge x-ray absorption fine structure peaks of boron nitride thin films prepared by sputtering deposition

Four {pi}{sup *} resonance peaks were observed in the B-K near edge x-ray absorption fine structure spectra of boron nitride thin films prepared by magnetron sputtering. In the past, these peaks have been explained as the K-absorption of boron atoms, which are present in environment containing nitrogen vacancies, the number of which is 1-3 corresponding to the three peaks at higher photon energy. However, the authors found that there was a strong correlation between the intensities of these three peaks and that of O-K absorption after wide range scanning and simultaneous measurement of nitrogen and oxygen K-absorptions of the BN films. Therefore, the authors conclude that these three peaks at the higher energy side correspond to boron atoms bound to one-to-three oxygen atoms instead of three nitrogen atoms surrounding the boron atom in the h-BN structure. The result of the first-principles calculation with a simple cluster model supported the validity of this explanation.

36 MATERIALS SCIENCE↗

High quality ZnO:Al transparent conducting oxide films synthesized by pulsed filtered cathodic arc deposition

Aluminum-doped zinc oxide, ZnO:Al or AZO, is a well-known n-type transparent conducting oxide with great potential in a number of applications currently dominated by indium tin oxide (ITO). In this study, the optical and electrical properties of AZO thin films deposited on glass and silicon by pulsed filtered cathodic arc deposition are systematically studied. In contrast to magnetron sputtering, this technique does not produce energetic negative ions, and therefore ion damage can be minimized. The quality of the AZO films strongly depends on the growth temperature while only marginal improvements are obtained with post-deposition annealing. The best films, grown at a temperature of about 200?C, have resistivities in the low to mid 10-4 Omega cm range with a transmittance better than 85percent in the visible part of the spectrum. It is remarkable that relatively good films of small thickness (60 nm) can be fabricated using this method.

36 MATERIALS SCIENCE↗

Effect of target-substrate distance on properties of flexible InZnSnO films grown by linear facing target sputtering

The authors have investigated the effect of target-to-substrate distance (TSD) on the electrical, optical, and structural properties of flexible InZnSnO (IZTO) films grown on polyethylene terephthalate substrates using linear facing target sputtering (LFTS) at room temperature. The electrical and optical properties of IZTO film grown by LFTS were significantly influenced by TSD while the structural and surface properties of IZTO film were not affected by TSD, unlike conventional magnetron sputtering. Regardless of TSD, all IZTO film showed completely amorphous structure with very low root mean square roughness of 0.33 nm, due to the low kinetic energy of sputtered IZTO atoms and a substrate position that did not directly face the targets. Based on the figure of merit value, the optimized TSD for deposition of flexible IZTO films is 2.5 cm. At optimized conditions, the IZTO film showed a sheet resistance of 23.1 {Omega}/sq and an optical transmittance of 80%.

36 MATERIALS SCIENCE↗

Temperature and bias-voltage dependence of atomic-layer-deposited HfO{sub 2}-based magnetic tunnel junctions

Magnetic tunnel junctions with HfO{sub 2} tunnel barriers were prepared through a combination of magnetron sputtering and atomic layer deposition. We investigated the tunneling transport behavior, including the tunnel magnetoresistance ratio and the current-voltage characteristics between room temperature and 2 K. Here, we achieved a tunneling magneto resistance ratio of 10.3% at room temperature and 19.3% at 2 K. Furthermore, we studied the bias-voltage and temperature dependencies and compared the results with those of commonly used alumina- and magnesia-based magnetic tunnel junctions. We observed a polycrystalline/amorphous electrode-barrier system via high-resolution transmission electron microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable giant magnetic anisotropy in amorphous SmCo thin films

SmCo thin films have been grown by magnetron sputtering at room temperature with a composition of 2-35 at. % Sm. Films with 5 at. % or higher Sm are amorphous and smooth. A giant tunable uniaxial in-plane magnetic anisotropy is induced in the films which peaks in the composition range 11-22 at. % Sm. This cross-over behavior is not due to changes in the atomic moments but rather the local configuration changes. The excellent layer perfection combined with highly tunable magnetic properties make these films important for spintronics applications.

36 MATERIALS SCIENCE↗

In-situ x-ray diffraction study of the growth of highly strained epitaxial BaTiO{sub 3} thin films

In-situ synchrotron x-ray diffraction was performed during the growth of BaTiO{sub 3} thin films on SrTiO{sub 3} substrates using both off-axis RF magnetron sputtering and pulsed laser deposition techniques. It was found that the films were ferroelectric during the growth process, and the presence or absence of a bottom SrRuO{sub 3} electrode played an important role in the growth of the films. Pulsed laser deposited films on SrRuO{sub 3} displayed an anomalously high tetragonality and unit volume, which may be connected to the previously predicted negative pressure phase of BaTiO{sub 3}.

36 MATERIALS SCIENCE↗

Direct synthesis of large size ferromagnetic SmCo{sub 5} nanoparticles by a gas-phase condensation method

Ferromagnetic SmCo{sub 5} nanoparticles with large size have been directly synthesized by a magnetron-sputtering-based gas-phase condensation method. Based on this method, we studied the effect of thermodynamic environment for the growth of SmCo{sub 5} nanoparticles. It was found that the well-crystallized SmCo{sub 5} nanoparticle tends to form a hexagonal disk shape with its easy axis perpendicular to the disk plane. More importantly, under the condition of high sputtering current, well-crystallized nanoparticles were found to be formed through a three-stage growth process: aggregation, coalescence, and second crystallization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗