SEARCH · Engineering Papers

Results for “Lithium Battery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

DOE OSTI2023

On the Impact of Mechanics on Electrochemistry of Lithium-Ion Battery Anodes

Abstract Models exploring electrochemistry-mechanics coupling in liquid electrolyte lithium-ion battery anodes have traditionally incorporated stress impact on thermodynamics, bulk diffusive transport, and fracture, while stress-kinetics coupling is more explored in the context of all solid-state batteries. Here, we showcase the existence of strong link between active particle surface pressure and reaction kinetics affecting performance even in liquid electrolyte systems. Traction-free and immobile particle surface mechanical boundary conditions are used to delineate the varying pressure magnitudes in graphite host during cycling. Both tensile and compressive stresses are generated in traction-free case, while a fixed surface subjects the entire particle to a compression state. Pressure magnitudes are nearly two to three orders of magnitude higher for the latter resulting in significant depression of open circuit potential and improvement of exchange current densities compared to stress-free state. The results demonstrate the need for incorporating stress-kinetics linkage in models and provide a rationale for putting battery electrodes under compression to improve kinetics.

25 ENERGY STORAGE↗

DOE OSTI2023

Irreparable Interphase Chemistry Degradation Induced by Temperature Pulse in Lithium–Ion Batteries

While it is widely recognized that the operating temperature significantly affects the energy density and cycle life of lithium-ion batteries, the consequence of electrode-electrolyte interphase chemistry to sudden environmental temperature changes remains inadequately understood. Here, we systematically investigate the effects of a temperature pulse (T pulse) on the electrochemical performance of LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) pouch full cells. By utilizing advanced characterization tools, such as time-of-flight secondary-ion mass spectrometry, we reveal that the T pulse can lead to an irreversible degradation of cathode-electrolyte interphase chemistry and architecture. Despite negligible immediate impacts on the solid-electrolyte interphase (SEI) on graphite anode, aggregated cathode-to-anode chemical crossover gradually degrades the SEI by catalyzing electrolyte reduction decomposition and inducing metallic dead Li formation because of insufficient cathode passivation after the T pulse. Consequently, pouch cells subjected to the T pulse show an inferior cycle stability to those free of the T pulse. Furthermore, this work unveils the effects of sudden temperature changes on the interphase chemistry and cell performance, emphasizing the importance of a proper temperature management in assessing performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Sustainable Direct Recycling of Lithium-Ion Batteries via Solvent Recovery of Electrode Materials

Separation of electrode materials from their current collectors is an enabling step toward recovering critical materials from spent lithium-ion batteries. In this study, a highly efficient, cost-effective, and environmentally sustainable separation process was developed for that purpose. Ethylene glycol, a vital commodity chemical as an antifreeze and polymer precursor, is used to delaminate electrode materials at low temperatures in seconds without altering the crystalline structure and morphology of active electrode materials. The recovered current collectors were intact without any corrosion. The authors also found that the solvent could be continuously reused, leading to the development of a closed-loop ecosystem and lithium-ion battery circular economy. The ultrafast delamination was driven by the competitive inhibition of binding through the weakening of hydrogen bonding. The ethylene glycol-based separation is a sustainable electrode recovery process that paves the way for battery recycling.

25 ENERGY STORAGE↗

DOE OSTI2024

SEI Formation and Lithium-Ion Electrodeposition Dynamics in Lithium Metal Batteries via First-Principles Kinetic Monte Carlo Modeling

The stabilization and enhanced performance of lithium metal batteries (LMBs) depend on the formation and evolution of the Solid Electrolyte Interphase (SEI) layer as a critical component for regulating the Li metal electrodeposition processes. This study employs a first-principles kinetic Monte Carlo (kMC) model to simulate the SEI formation and Li + electrodeposition processes on a lithium metal anode, integrating both the electrochemical electrolyte reduction reactions and the diffusion events giving place to the SEI aggregation processes during battery charge and discharge processes. The model replicates the competitive interactions between organic and inorganic SEI components, emphasizing the influence of the cycling regime. Results indicate that grain boundaries within the SEI facilitate faster lithium-ion transport compared to crystalline regions, crucial for improving the performance and stability of LMBs. The findings underscore the importance of dynamic SEI modeling for further development of next-generation high-energy-density batteries.

25 ENERGY STORAGE↗

DOE OSTI2025

Innovative Approach to Recycle Lithium‐Ion Battery Electrolytes via Sequential Chemical Processes

The rapid growth of electric vehicles (EV) has driven the widespread use of lithium-ion batteries (LIBs). This will result in a large amount of spent batteries that if not properly disposed will pose significant environmental damage, especially from the electrolyte. The electrolyte contains lithium hexafluorophosphate (LiPF 6 ), which when treated by either incineration or water washing can generate harmful F- and P-containing substances such as hydrofluoric acid (HF). In this study, an innovative two-step process is presented to separate and purify both the solvents and lithium salts from the spent electrolyte. Antisolvent assisted precipitation is used to selectively isolate LiPF 6 salt in the form of a complex with ethylene carbonate. Subsequent distillation then separates the volatile electrolyte solvents and antisolvent from each other effectively. In addition, a new process to further purify LiPF 6 from its ethylene carbonate (EC) complex is also presented. This electrolyte recycling method not only enables the recovery of the high-value LiPF 6 salt and the electrolyte solvents, but also paves the way for environmentally responsible and circular LIB recycling.

electrolyte↗

DOE OSTI2020

Functional organic salt for lithium-ion batteries

An electrolyte for a lithium-ion electrochemical cell comprises a non-aqueous solution of a lithium salt and a redox shuttle salt compound in a non-aqueous solvent, wherein the redox shuttle compound comprises an amino-substituted cyclopropenium salt of Formula (I) as described herein.

25 ENERGY STORAGE↗

DOE OSTI2020

Annulated tetra-substituted hydroquinone ether-based redox shuttle additives for lithium-ion batteries

An electrolyte for a lithium-ion electrochemical cell comprises a non-aqueous solution of a lithium salt and a redox shuttle compound, wherein the redox shuttle compound comprises —OR groups at carbons 1 and 4 of a benzene ring; a first hydrocarbon ring fused to carbons 2 and 3 of the benzene ring; and a second hydrocarbon ring fused to the carbons 5 and 6 of the benzene ring, wherein either (i) the first and second hydrocarbon rings together with the benzene ring constitute two fused benzobicyclo[2.2.2]octane ring systems sharing a common benzo core group; or (ii) the first and second hydrocarbon rings together with the benzene ring constitute two fused benzobicyclo[2.2.1]heptane ring systems sharing a common benzo core group.

25 ENERGY STORAGE↗

DOE OSTI2022

Binders for silicon electrodes in lithium-ion batteries

An electrode for a lithium-ion electrochemical cell comprises silicon particles and carbon particles coated on a conductive current collector. The silicon and carbon particles being bound to each other and to the current collector by a cross-linked binder formed from a combination of a poly(carboxylic acid) such as poly(acrylic acid) and a branched polyethyleneimine. A method of preparing the anode also is described.

Shi, Zhangxing↗

DOE OSTI2023

Solvents and catalyst preparations for lithium-oxygen batteries

An electrochemical device includes a lithium anode having a red poly(benzonitrile) coating covering at least a portion of the anode; a separator and an air cathode comprising reduced graphene oxide over gas diffusion layer; and an electrolyte comprising an ether solvent, benzonitrile, and a lithium salt.

Wang, Hsien-Hau↗

DOE OSTI2024

Solvents and catalyst preparations for lithium-oxygen batteries

Wang, Hsien-Han↗

DOE OSTI2020

Extreme Fast Charging Lithium-Ion Batteries (Final Technical Report)

The objective of this research project is to develop, design, fabricate, and demonstrate lithium ion battery cells that optimize energy density, reduce cost, and demonstrate eXtreme Fast Charging (XFC) capabilities. The XFC capability of the cell will be determined by the final specific energy of the cell after completing 500 6C charge /1C discharge cycles. Over the first 18 months of the project, over 800 cells were produced in groups of 20 cells to determine the optimum configuration of following parameters to optimized XFC performance: (1) Graphite anode material optimization (2) Electrolyte and additive optimization (3) Electrode and cell design optimization. In the final 6 months of the project, over 200 optimized cells were produced that featured optimized parameters from each of the independent studies. The final optimized cells exhibited a final specific energy of 150 Wh/kg, meeting the DOE project goal, but failing to meet the initial specific energy requirement of 180 Wh/kg.

25 ENERGY STORAGE↗

DOE OSTI2025

Cathode Upcycling for Direct Recycling of Lithium‐Ion Batteries Using a Precipitation Approach

With the increased production of electric vehicles to reduce carbon emissions, the lithium-ion battery market to supply those vehicles has grown dramatically. To enhance battery sustainability and circularity, direct recycling methods aim to recover intact cathode materials. However, end-of-life cathode materials are typically 15–20 years old and often have lower energy density compared to current cathode materials. To address this challenge, a rapid precipitation process is developed to boost energy density by converting low Ni-compositions, LiNi 0.33 Co 0.33 Mn 0.33 O 2 (NMC111), into higher Ni-compositions (NMC622). This process forms a Ni-rich coating on cathode particles that diffuses into the core upon high-temperature relithiation, increasing compositional homogeneity. The upcycling process leverages existing infrastructure, offering low capital cost and minimal additional chemical input. Through ex situ tomographic transmission X-ray microscopy (TXM), 3D Ni:Co elemental mixing is quantified, confirming that elemental content evens at the secondary particle level with a mean NMC622 composition upon relithiation. However, elemental gradients remain in the single crystalline primary particles. Ex situ high-resolution and in situ wide-angle X-ray diffraction reveals concurrent structural changes during the relithiation process. These findings provide key insights into the structural and chemical mechanisms of elemental diffusion to obtain further improvements of increased capacity and retention through compositional conversion of cathode materials.

Cathode Upcycling↗

DOE OSTI2020

Machine-learning-revealed statistics of the particle-carbon/binder detachment in lithium-ion battery cathodes

The microstructure of a composite electrode determines how individual battery particles are charged and discharged in a lithium-ion battery. It is a frontier challenge to experimentally visualize and, subsequently, to understand the electrochemical consequences of battery particles’ evolving (de)attachment with the conductive matrix. Herein, we tackle this issue with a unique combination of multiscale experimental approaches, machine-learning-assisted statistical analysis, and experiment-informed mathematical modeling. Our results suggest that the degree of particle detachment is positively correlated with the charging rate and that smaller particles exhibit a higher degree of uncertainty in their detachment from the carbon/binder matrix. We further explore the feasibility and limitation of utilizing the reconstructed electron density as a proxy for the state-of-charge. Our findings highlight the importance of precisely quantifying the evolving nature of the battery electrode’s microstructure with statistical confidence, which is a key to maximize the utility of active particles towards higher battery capacity.

25 ENERGY STORAGE↗

DOE OSTI2021

Enabling High-Temperature and High-Voltage Lithium-Ion Battery Performance through a Novel Cathode Surface-Targeted Additive

We report lithium-ion batteries (LIBs) are being used in locations and applications never imagined when they were first conceived. To enable this broad range of applications, it has become necessary for LIBs to be stable to an ever broader range of conditions, including temperature and energy. Unfortunately, while negative electrodes have received a great deal of focus in electrolyte development, stabilization of positive electrodes remains an elusive target. Here, we report a novel additive that shows the ability to protect positive electrodes against elevated temperatures and voltages. This additive can be used in small quantities, and its targeted behavior allows it to remain functional in complex electrolyte packages. This can prove an effective approach to targeting specific aspects of cell performance.

25 ENERGY STORAGE↗

DOE OSTI2024

Acidity-Governed Rules in the Electrochemical Performance of Fluorinated Benzenes for High-Voltage Lithium Metal Batteries

Judicious selection of the optimal fluorobenzene (FB) as a nonsolvating cosolvent for lithium metal batteries (LMBs) is reported. For this work, we found the key correlation between FB structures and cycling stabilities of cells: increased fluorine substitution of FBs results in higher anodic stability but at the expense of reduced reductive stability, and FBs containing three or more fluorine atoms exhibit insufficient anodic stability in the electrolyte system comprised of fluoroethylene carbonate (FEC) and ethyl methyl carbonate (EMC). More importantly, FBs with higher acidity (lower pK a ) due to protons located between two adjacent fluorine atoms tend to be more susceptible to side reactions during cycling. Our results indicate that difluorobenzenes with no “acidic” proton (DFB2 and DFB4) have emerged as the optimal choice with the desired redox stability in high-voltage LMBs. Nuclear magnetic resonance and X-ray photoelectron spectroscopy confirmed these findings, providing guidance for selecting the most suitable FB variants as nonsolvating cosolvents for high-voltage LMBs.

25 ENERGY STORAGE↗

DOE OSTI2025

Life-cycle greenhouse gas emissions analysis of battery-grade lithium production in Finland

Various countries are undertaking initiatives to domestically produce battery-related critical materials. Within Finland, Keliber Technology Oy is developing capabilities for battery-grade lithium hydroxide monohydrate (LHM) production from spodumene ores. A detailed life-cycle assessment (LCA) of this pathway is conducted to determine its life-cycle GHG impacts using Argonne's R&D GREET (Research and Development Greenhouse gases, Regulated Emissions, and Energy use in Technologies) model. The analysis shows life-cycle GHG emissions of similar to 9.2 kg CO 2-eq /kg LHM, dominated by contributions from three energy sources - diesel, natural gas, and electricity - and two material inputs - lime (CaO) and soda ash (Na 2 CO 3 ). Sensitivity analyses highlight the potential to reduce these impacts using low-carbon electricity, sequestration of process CO 2 emissions generated during CaO and Na 2 CO 3 production, and bio-based energy for LHM production (by similar to 15 % each). A comparative analysis shows lower impacts for Keliber's LHM than for existing LHM production from Australian spodumene ores processed in China (by similar to 40 %).

CCS↗

DOE OSTI2024

Structure–performance relationships of lithium-ion battery cathodes revealed by contrast-variation small-angle neutron scattering

Lithium-ion battery cathodes are porous composites of active material, conductive carbon, and polymer binder. Controlling the cathode microstructure is key to achieving high energy density and cycling stability. Current characterization techniques lack the nanoscale resolution over representative volumes necessary to relate cathode microstructure to cycling performance. To address this challenge, we utilize contrast-variation small-angle neutron scattering to quantify the chemical and structural features of cathodes wet by dimethyl carbonate, representing a relevant solvent environment. Using neutron scattering measurements, we identify an expansion in carbon and polymer structures that arises after calendering and wetting with solvent. Further, we deconvolute the carbon and binder phases to obtain the solvent-accessible carbon black surface area, which we correlate to diminished capacity retention driven by electrolyte decomposition on exposed carbon. This technique provides nanoscale insight into composite cathode microstructures and resulting cycling performance, promising future applications to a broad range of porous materials that exist in energy storage systems.

25 ENERGY STORAGE↗

DOE OSTI2023

Direct recycling of lithium-ion battery scraps for manufacturing a new anode

An improved method of recycling lithium-ion battery anode scraps is provided. The method involves isolating an anode scrap including a graphite anode film adhered to a current collector foil with a polyvinylidene fluoride binder. The anode scrap is combined with deionized water to form a first mixture. The graphite anode film is delaminated from the current collector foil to form a second mixture comprising a free collector foil and a free graphite anode film. The free graphite anode film is filtered and dried from the second mixture to recover the free graphite anode film. The free graphite anode film is combined with a solvent comprising N-methyl-2-pyrrolidone (NMP) to form an anode formation slurry. The slurry is coated onto a copper current collector to produce a new anode.

Bai, Yaocai↗