SEARCH · Engineering Papers

Results for “Liquid crystals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Finding The Laminar-To-Turbulent Transition

Technical memorandum evaluates four techniques for determining location laminar flow about airfoil changes to turbulent flow. Studied in flight experiments on F-14 variable-sweep-wing aircraft. First technique involved measurements by hot-film anemometer sensors. Second, measurements by boundary-layer rakes, each array of pressure probes. Third, measurements taken by pitot tubes arrayed on airfoil, flush with surface, and fourth, test airfoil surface coated with pressure-sensitive liquid crystals, to make pressure pattern of flow visible.

Anderson, Bianca T.↗

NASA NTRS1992

Computer Data-Entry System Facilitates Proofreading

Visual optical-electronic display for encoding and measurement (VODEM) is system of computer data-entry and display equipment and associated software. Designed to reduce significantly rate of errors in text or other data entered manually or by optical character-recognition equipment and eases task of proofreading those data. Accuracy increased and stress reduced. Provides head-on display including two texts or sets of data to be compared. Developed in large-screen and small-screen version differing mainly in display equipment. Large-screen version includes cathode-ray-tube video display; small-screen version includes smaller liquid-crystal display mounted on computer-controlled x-y drive.

Woo, John, Jr.↗

NASA NTRS1991

The Eckhaus and the Benjamin-Feir instability near a weakly inverted bifurcation

We investigate how the criteria for two prototype instabilities in one dimensional pattern forming systems, namely for the Eckhaus instability and for the Benjamin-Feir instability, change as one goes from a continuous bifurcation, to a spatially periodic or spatially and/or time periodic state, to the corresponding weakly inverted, i.e., hysteretic, cases. We also give the generalization to two dimensional patterns in systems with anisotropy as they arise from hydrodynamic instabilities in nematic liquid crystals.

Brand, Helmut R.↗

NASA NTRS1991

Optical Correlation

Pattern recognition may supplement or replace certain navigational aids on spacecraft in docking or landing activities. The need to correctly identify terrain features remains critical in preparation of autonomous planetary landing. One technique that may solve this problem is optical correlation. Correlation has been successfully demonstrated under ideal conditions; however, noise significantly affects the ability of the correlator to accurately identify input signals. Optical correlation in the presence of noise must be successfully demonstrated before this technology can be incorporated into system design. An optical correlator is designed and constructed using a modified 2f configuration. Liquid crystal televisions (LCTV) are used as the spatial light modulators (SLM) for both the input and filter devices. The filter LCTV is characterized and an operating curve is developed. Determination of this operating curve is critical for reduction of input noise. Correlation of live input with a programmable filter is demonstrated.

Cotariu, Steven S.↗

NASA NTRS1992

Fiber-optic interconnection networks for spacecraft

The overall goal of this effort was to perform the detailed design, development, and construction of a prototype 8x8 all-optical fiber optic crossbar switch using low power liquid crystal shutters capable of operation in a network with suitable fiber optic transmitters and receivers at a data rate of 1 Gb/s. During the earlier Phase 1 feasibility study, it was determined that the all-optical crossbar system had significant advantages compared to electronic crossbars in terms of power consumption, weight, size, and reliability. The result is primarily due to the fact that no optical transmitters and receivers are required for electro-optic conversion within the crossbar switch itself.

Powers, Robert S.↗

NASA NTRS1991

Aerodynamics and heat transfer investigations on a high Reynolds number turbine cascade

The results of aerodynamic and heat transfer experimental investigations performed in a high Reynolds number turbine cascade test facility are analyzed. The experimental facility simulates the high Reynolds number flow conditions similar to those encountered in the Space Shuttle Main Engine. In order to determine the influence of Reynolds number on aerodynamic and thermal behavior of the blades, heat transfer coefficients were measured at various Reynolds numbers using liquid crystal temperature measurement technique. Potential flow calculation methods were used to predict the cascade pressure distributions. Boundary layer and heat transfer calculation methods were used with these pressure distributions to verify the experimental results.

Schobeiri, Taher↗

NASA NTRS1992

Comparison of central axis and jet ring coolant supply for turbine disk cooling on a SSME-HPOTP model

The test facility, test methods and results are presented for an experimental study modeling the cooling of turbine disks in the blade attachment regions with multiple impinging jets, in a configuration simulating the disk cooling method employed on the Space Shuttle Main Engine oxygen turbopump. The study's objective was to provide a comparison of detailed local convection heat transfer rates obtained for a single center-supply of disk coolant with those obtained with the present flight configuration where disk coolant is supplied through an array of 19 jets located near the disk outer radius. Specially constructed disk models were used in a program designed to evaluate possible benefits and identify any possible detrimental effects involved in employing an alternate disk cooling scheme. The study involved the design, construction and testing of two full scale rotating model disks, one plane and smooth for baseline testing and the second contoured to the present flight configuration, together with the corresponding plane and contoured stator disks. Local heat transfer rates are determined from the color display of encapsulated liquid crystals coated on the disk in conjunction with use of a computer vision system. The test program was composed of a wide variety of disk speeds, flowrates, and geometrical configurations, including testing for the effects of disk boltheads and gas ingestion from the gas path region radially outboard of the disk-cavity.

Kim, Y. W.↗

NASA NTRS1990

The optical implementation of inner product neural associative memory

A liquid-crystal TV spatial light modulator (LCTV SLM) input device and LCTV nonlinear thresholding element are presently used to accomplish an all-optical implementation of an inner-product neural associative memory. This architecture represents an alternative to the vector-matrix multiplication method of the Hopfield model, which is most often employed by neural network associative memory models. LCTV SLM experimental results are presented and discussed.

Liu, Hua-Kuang↗

NASA NTRS1990

Real-time optical correlator using photorefractive GaAs

A real-time optical correlator based on GaAs and liquid-crystal TV (LCTV) is demonstrated. The demonstrated system has a video-frame rate limited by the speed of the LCTVs; if faster spatial-light modulators are used, the potential frame rate of a GaAs-based correlator can be as fast as 1000 frames/sec under experimental conditions. Comparisons are made between VanderLugt and joint transform and between degenerate and nondegenerate four-wave mixing. The edge-enhancement effect and the Bragg diffraction effect are discussed.

Liu, Duncan T. H.↗

NASA NTRS1993

Mapping Temperatures On Heat Pipes

Paints containing thermochromic liquid crystals (TLC's) used to map temperatures on heat pipes and thermosyphons. Color of thermally sensitive TLC coat changes reversibly upon heating or cooling. Each distinct color indicates particular temperature. Transient and steady-state isotherms become visible as colored bands. Positions and movements of bands yield information about startup transients, steady-state operation, cooler regions containing noncondensible gas, and other phenomena relevant to performance of heat pipe.

Gunnerson, Fred S.↗

NASA NTRS1992

Crossflow Stability and Transition Experiments in a Swept-Wing Flow

An experimental examination of crossflow instability and transition on a 45 degree swept wing is conducted in the Arizona State University Unsteady Wind Tunnel. The stationary-vortex pattern and transition location are visualized using both sublimating-chemical and liquid-crystal coatings. Extensive hot-wire measurements are conducted at several measurement stations across a single vortex track. The mean and travelling-wave disturbances are measured simultaneously. Stationary-crossflow disturbance profiles are determined by subtracting either a reference or a span-averaged velocity profile from the mean-velocity data. Mean, stationary-crossflow, and travelling-wave velocity data are presented as local boundary-layer profiles and as contour plots across a single stationary-crossflow vortex track. Disturbance-mode profiles and growth rates are determined. The experimental data are compared to predictions from linear stability theory.

Dagenhart, John Ray↗

NASA NTRS1993

Measurements and computational analysis of heat transfer and flow in a simulated turbine blade internal cooling passage

Visual and quantitative information was obtained on heat transfer and flow in a branched-duct test section that had several significant features of an internal cooling passage of a turbine blade. The objective of this study was to generate a set of experimental data that could be used to validate computer codes for internal cooling systems. Surface heat transfer coefficients and entrance flow conditions were measured at entrance Reynolds numbers of 45,000, 335,000, and 726,000. The heat transfer data were obtained using an Inconel heater sheet attached to the surface and coated with liquid crystals. Visual and quantitative flow field results using particle image velocimetry were also obtained for a plane at mid channel height for a Reynolds number of 45,000. The flow was seeded with polystyrene particles and illuminated by a laser light sheet. Computational results were determined for the same configurations and at matching Reynolds numbers; these surface heat transfer coefficients and flow velocities were computed with a commercially available code. The experimental and computational results were compared. Although some general trends did agree, there were inconsistencies in the temperature patterns as well as in the numerical results. These inconsistencies strongly suggest the need for further computational studies on complicated geometries such as the one studied.

Russell, Louis M.↗

NASA NTRS1991

Free-space laser communication technologies III; Proceedings of the Meeting, Los Angeles, CA, Jan. 21, 22, 1991

The present volume on free-space laser communication technologies discusses system analysis, performance, and applications, pointing, acquisition, and tracking in beam control, laboratory demonstration systems, and transmitter and critical component technologies. Attention is given to a space station laser communication transceiver, meeting intersatellite links mission requirements by an adequate optical terminal design, an optical approach to proximity-operations communications for Space Station Freedom, and optical space-to-ground link availability assessment and diversity requirements. Topics addressed include nonmechanical steering of laser beams by multiple aperture antennas, a free-space simulator for laser transmission, heterodyne acquisition and tracking in a free-space diode laser link, and laser terminal attitude determination via autonomous star tracking. Also discussed are stability considerations in relay lens design for optical communications, liquid crystals for lasercom applications, and narrowband optical interference filters.

Begley, David L.↗

NASA NTRS1992

Autonomous planetary landing guidance by optical correlation

We describe our planned use of optical correlation in landmark navigation associated with planetary landing. Standard correlation provides 'pointing-to' information, giving the vector to the landmark from the spacecraft in the spacecraft frame. The synthetic estimation filter (SEF) provides 'pointing-from' information, estimating the vector from the landmark to the spacecraft. Digital and optical SEFs were constructed and compared using a Martian-like 3D modelboard to provide test images. The digital SEF worked reasonably well, but the optical SEF did not perform as expected. The optical SEF was implemented with a liquid crystal television (LCTV) correlator that had been used successfully in previous SEF experiments using a spacecraft model. The results suggest the SLM model for the LCTV needs further refinements. Both the digital and optical filter provided good pointing-to results. We did not plot the correlation surface for the digital SEF response, and though it is less sharp than the POF, it had only a one-pixel variation in the peak location. Surface plots for the conventional optical phase-only filter produced a correlation peak that was sharp enough to be located within two pixels.

Knopp, Jerome↗

NASA NTRS1992

Sensors and sensor systems for guidance and navigation II; Proceedings of the Meeting, Orlando, FL, Apr. 22, 23, 1992

Topics discussed in this volume include aircraft guidance and navigation, optics for visual guidance of aircraft, spacecraft and missile guidance and navigation, lidar and ladar systems, microdevices, gyroscopes, cockpit displays, and automotive displays. Papers are presented on optical processing for range and attitude determination, aircraft collision avoidance using a statistical decision theory, a scanning laser aircraft surveillance system for carrier flight operations, star sensor simulation for astroinertial guidance and navigation, autonomous millimeter-wave radar guidance systems, and a 1.32-micron long-range solid state imaging ladar. Attention is also given to a microfabricated magnetometer using Young's modulus changes in magnetoelastic materials, an integrated microgyroscope, a pulsed diode ring laser gyroscope, self-scanned polysilicon active-matrix liquid-crystal displays, the history and development of coated contrast enhancement filters for cockpit displays, and the effect of the display configuration on the attentional sampling performance.

Welch, Sharon S.↗

NASA NTRS1992

Selection of LCTV operating curves for input and filter

A liquid crystal television (LCTV) SLM's phase, amplitude, and polarization all influence our selection of operating curves for input and filter. With its continuum of drive voltage, the LCTV permits grey-level control in both locations. Selection of an optimum curve depends on expected variations in signal amplitude, presence of input scene structured noise, and other factors. Using modulators obtained from a commercially available projection LCTV, and with no specifically added input noise present, we have obtained laboratory results in which the ratio of peak intensity to correlator system noise exceeded 100:1. Unfortunately, it was massively inefficient to implement the algorithm which had been developed as the abstract for this paper was submitted. Fortunately, we have quite recently developed two insights that will speed it by several orders of magnitude, and we shall report that result in the future. We will also extend the work to include clutter objects and additive input scene noise.

Juday, Richard D.↗

NASA NTRS1992

Real-time VanderLugt optical correlator that uses photorefractive GaAs

A real-time GaAs and liquid-crystal television- (LCTV-) based optical correlator is demonstrated. The speed of this correlator (video rate) is limited by the LCTV's; with faster spatial light modulators, the potential speed of a GaAs-based correlator may be 1000 frames/s or higher. Comparisons are made between VanderLugt and joint transform configurations and between degenerate and nondegenerate four-wave mixings. The edge-enhancement effect and the Bragg diffraction effect are also discussed.

Liu, Duncan T. H.↗

NASA NTRS1992

Optical implementation of terminal-attractor-based associative memory

For the purpose of reducing the spurious states in a Hopfield neural net for associative memory, we invoke terminal attractors. In achieving the optical implementation of the terminal-attractor-based associative memory (TABAM) as described in this paper, we first prove the existence of the terminal-attractor model with binary neuron representation. We then present several one- and two-dimensional optical architectures for the TABAM. Finally, as an example, we experimentally demonstrate an inner-product optical neural model using liquid-crystal spatial light modulators with engineering approximations and discuss how to apply the inner-product model to build a two-dimensional parallel processing TABAM.

Liu, Hua-Kuang↗