Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level Set”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Ventilation Control of Volatile Organic Compounds in New U.S. Homes: Results of a Controlled Field Study in Nine Residential Units

In order to optimize strategies to remove airborne contaminants in residences, it is necessary to determine how contaminant concentrations respond to changes in the air exchange rate. The impact of air exchange rate on the indoor concentrations of 39 target volatile organic compounds (VOCs) was assessed by measuring air exchange rates and VOC concentrations at three ventilation settings in nine residences. Active sampling methods were used for VOC concentration measurements, and passive perfluorocarbon tracer gas emitters with active sampling were used to determine the overall air exchange rate corresponding to the VOC measurements at each ventilation setting. The concentration levels and emission rates of the target VOCs varied by as much as two orders of magnitude across sites. Aldehyde and terpene compounds were typically the chemical classes with highest concentrations, followed by alkanes, aromatics, and siloxanes. For each home, VOC concentrations tended to decrease as the air exchange rate was increased, however, measurement uncertainty was significant. The indoor concentration was inversely proportional to air exchange rate for most compounds. For a subset of compounds including formaldehyde, however, the indoor concentration exhibited a non-linear dependence on the timescale for air exchange

42 ENGINEERING↗

Developing Performance Cost Index Targets for ASHRAE Standard 90.1 Appendix G – Performance Rating Method

Appendix G, the Performance Rating Method in ASHRAE Standard 90.1 has been updated to make two significant changes for the 2016 edition, to be published in October of 2016. First, it allows Appendix G to be used as a third path for compliance with the standard in addition to rating beyond code building performance. This prevents modelers from having to develop separate building models for code compliance and beyond code programs. Using this new version of Appendix G to show compliance with the 2016 edition of the standard, the proposed building design needs to have a performance cost index (PCI) less than targets shown in a new table based on building type and climate zone. The second change is that the baseline design is now fixed at a stable level of performance set approximately equal to the 2004 code. Rather than changing the stringency of the baseline with each subsequent edition of the standard, compliance with new editions will simply require a reduced PCI (a PCI of zero is a net-zero building). Using this approach, buildings of any era can be rated using the same method. The intent is that any building energy code or beyond code program can use this methodology and merely set the appropriate PCI target for their needs. This report discusses the process used to set performance criteria for compliance with ASHRAE Standard 90.1-2016 and suggests a method for demonstrating compliance with other codes and beyond code programs.

99 GENERAL AND MISCELLANEOUS↗

Developing Performance Cost Index Targets for ASHRAE Standard 90.1 Appendix G – Performance Rating Method - Rev.1

Appendix G, the Performance Rating Method in ASHRAE Standard 90.1 has been updated to make two significant changes for the 2016 edition, to be published in October of 2016. First, it allows Appendix G to be used as a third path for compliance with the standard in addition to rating beyond code building performance. This prevents modelers from having to develop separate building models for code compliance and beyond code programs. Using this new version of Appendix G to show compliance with the 2016 edition of the standard, the proposed building design needs to have a performance cost index (PCI) less than targets shown in a new table based on building type and climate zone. The second change is that the baseline design is now fixed at a stable level of performance set approximately equal to the 2004 code. Rather than changing the stringency of the baseline with each subsequent edition of the standard, compliance with new editions will simply require a reduced PCI (a PCI of zero is a net-zero building). Using this approach, buildings of any era can be rated using the same method. The intent is that any building energy code or beyond code program can use this methodology and merely set the appropriate PCI target for their needs. This report discusses the process used to set performance criteria for compliance with ASHRAE Standard 90.1-2016 and suggests a method for demonstrating compliance with other codes and beyond code programs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Functional Requirements for an Electronic Work Package System

This document provides a set of high level functional requirements for a generic electronic work package (eWP) system. The requirements have been identified by the U.S. nuclear industry as a part of the Nuclear Electronic Work Packages - Enterprise Requirements (NEWPER) initiative. The functional requirements are mainly applied to eWP system supporting Basic and Moderate types of smart documents, i.e., documents that have fields for recording input such as text, dates, numbers, and equipment status, and documents which incorporate additional functionalities such as form field data “type“ validation (e.g. date, text, number, and signature) of data entered and/or self-populate basic document information (usually from existing host application meta data) on the form when the user first opens it. All the requirements are categorized by the roles; Planner, Supervisor, Craft, Work Package Approval Reviewer, Operations, Scheduling/Work Control, and Supporting Functions. The categories Statistics, Records, Information Technology are also included used to group the requirements. All requirements are presented in Section 2 through Section 11. Examples of more detailed requirements are provided for the majority of high level requirements. These examples are meant as an inspiration to be used as each utility goes through the process of identifying their specific requirements. The report’s table of contents provides a summary of the high level requirements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Stochastic Richardson Extrapolation Based Numerical Error Estimation for Kinetic Plasma Simulations

We present a numerical error estimation technique specifically formulated to deal with stochastic code output with multiple discretization parameters. This method is based on multiple fits to an error model with arbitrary convergence rates and cross-coupling terms, performed using nonlinear optimization. The fitting approach varies by the type of residual norm which influences the importance of outliers, and weights which influences the relative importance of data points in the coarse and refined regions of discretization parameter space. To account for the influence of stochastic noise, these fits are performed on multiple bootstrap values based on the underlying response data set. Using an automated discretization domain selection scheme, the fits are performed on a series of reduced sets of discretization levels in order to find an optimal fully-converged result estimate in the minimum variance sense; this automated approach enables straightforward analysis of multiple quantities of interest and/or time and spatially-dependent response data. The overall numerical error analysis method is useful for verification and validation problems for stochastic simulation methods and forms a key component in the overall uncertainty quantification process. The method was demonstrated for steady and unsteady electron diode problems simulated using a particle-in-cell kinetic plasma code, demonstrating excellent results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Open-Source High-Fidelity Aggregate Composite Load Models of Emerging Load Behaviors for Large-Sale Analysis

The goal of this project is to accurately model the dynamic loads for power system planning and operation and to address the challenges inherent in such modeling. Existing load models are inadequate to handle the increasing proliferation of residential air conditioner loads and distributed energy resources, the emerging trends of price-responsive demand, and the growing importance of protective devices in equipment and buildings. A need has emerged to develop a fundamentally new class of load models and next-generation data tools. This work proposes to develop a set of regional–level, scalable open source load models and tools, including large-scale aggregate load protection, concept of price responsive demand, advanced load composition data, next-generation load model data tools, and advanced composite load model calibration and validation frameworks to address new challenges in the representation of next-generation load models.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Panorama 360 (Final Report)

This is the final technical report for the DOE-funded Panorama 360 project. Panorama 360 provided a resource for the collection, analysis, and sharing of performance data about end-to-end scientific workflows executing on DOE facilities. The work focused on workflows that include experimental data generation at DOE facilities. The main activities of Panorama 360 include the development of: 1. A distributed repository that stores different types of workflow execution data (e.g., point and time series performance traces at fine- and coarse-grained levels); 2. A set of open-source data capture, curation, and publishing tools fully integrated with a state-of-the-art workflow management system that automates data ingestion to the repository and enables users to discover, query, and process data from the repository; 3. A set of analysis algorithms and machine learning based tools to perform analysis and characterization of the gathered data, which can be used to detect anomalous performance or system faults; and 4. Best practices and recommendations for workflow evaluation, analysis, execution, and architectures.

97 MATHEMATICS AND COMPUTING↗

Panorama 360 (Final Report)

This final technical report from the lead institution, USC grant #DE-SC0012636, serves as the final technical report for collaborative institution UNC-CH grant #DE-SC0012390. The goal was to develop a repository and associated capabilities for data collection, ingestion, and analysis for a broad class of DOE applications that span experimental and simulation science workflows. In particular, this work focuses on workflows that include experimental data generation at DOE facilities. The main activities of Panorama 360 include the development of: (1) A distributed repository that stores different types of workflow execution data (e.g., point and time series performance traces at fine- and coarse-grained levels); (2) A set of open-source data capture, curation, and publishing tools fully integrated with a state-of-the-art workflow management system that automates data ingestion to the repository and enables users to discover, query, and process data from the repository; (3) A set of analysis algorithms and machine learning based tools to perform analysis and characterization of the gathered data, which can be used to detect anomalous performance or system faults; and (4) Best practices and recommendations for workflow evaluation, analysis, execution, and architectures.

97 MATHEMATICS AND COMPUTING↗

VERA Enhancements for Cross Section Shielding and Geometry Capabilities

Two tasks were undertaken in FY22 that focus on VERA enhancements. The first task involved improvements to the new cross section shielding capability that was added to VERA in FY21. This cell-based capability solves the slowing down problem for each pin cell using Dancoff factors calculated from the whole-core problem. The Dancoff factors are determined for each subgroup level for important sets of materials such as fuel rods, control rods, fuel rods loaded with gad, etc. The cross-section shielding is then performed for each cell using a 1D cylindrical collision probabilities (CP) calculation to obtain the equivalence cross sections required for the core transport calculations. The advantage of this method over the whole-core subgroup calculations is efficiency, since far fewer sweeps of the entire core are required.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Search for the Higgs boson produced in association with a W boson at CDF Run II

We present a search for standard model Higgs boson production in association with a W boson in proton-antiproton collisions (p$\bar{p}$ → W ± H → ℓνb$\bar{b}$) at a center of mass energy of 1.96 TeV. WH candidate events have a signature of a single lepton (E ± /μ ± ), missing transverse energy, and two jets. The search looks for candidate events in approximately 2.7 fb -1 of data recorded with the CDF II detector. The high-p T lepton (e,μ) in the events provides a distinct signature for triggering and most of the events in the dataset come from high-p{sub t} lepton triggers. Our analysis improves on prior searches by including events recorded on the E T + 2 Jets trigger with a lepton reconstructed as an isolated high-p T charged particle. We increase the sample purity by identifying ('tagging') long-lived b-hadrons in jets. A neural network combines distinguishing kinematic information into a function optimized for WH sensitivity. The neural network output distributions are consistent with the standard model background expectations and we set limits upper limits on the rate of Higgs production. We set 95% confidence level upper limits on the WH production cross section times branching ratio for Higgs masses from 100 to 150 GeV/c 2 and express our results as a ratio of the experimental limit to the theoretical Standard Model production rate. Our limits range from 3.6 (4.3 expected) to 61.1 (43.2 expected) for Higgs masses from 100 to 150 GeV/c 2 , respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Study of Charged Current Single Charged Pion Productions on Carbon in a Few-GeV Neutrino Beam

Understanding single charged pion production via neutrino-nucleus charged current interaction in the neutrino energy region of a few GeV is essential for future neutrino oscillation experiments since this process is a dominant background for v μ → v x oscillation measurements. There are two contributions to this process: single pion production via baryonic resonance (v μ N → μ - Nπ + ) and coherent pion production interacting with the entire nucleus (v μ A → μ - Aπ + ), where N is nucleon in the nucleus and A is the nucleus. The purpose of the study presented in this thesis is a precise measurement of charged current single charged pion productions, resonant and coherent pion productions, with a good final state separation in the neutrino energy region of a few GeV. In this thesis, we focus on the study of charged current coherent pion production from muon neutrinos scattering on carbon, v μ 12 C → μ -12 Cπ + , in the SciBooNE experiment. This is motivated by the fact that without measuring this component first, the precise determination of resonant pion production cross section can not be achieved since the contribution of coherent pion production in the region of small muon scattering angle is not small. Furthermore, the coherent process is particularly interesting because it is deeply rooted in fundamental physics via Adler's partially conserved axial-vector current theorem. We took data from June 2007 until August 2008, in both the neutrino and antineutrino beam. In total, 2.52 x 10 20 protons on target were collected. We have performed a search for charged current coherent pion production by using SciBooNE's full neutrino data set, corresponding to 0.99 x 10 20 protons on target. No evidence for coherent pion production is observed. We set 90% confidence level upper limits on the cross section ratio of charged current coherent pion production to the total charged current cross section at 0.67 x 10 -2 at mean neutrino energy 1.1 GeV and 1.36 x 10 -2 at mean neutrino energy 2.2 GeV. We reveal that the Rein-Sehgal model widely used in neutrino oscillation experiments breaks down at the neutrino energy region of a few GeV. This creates active controversies on the model of coherent pion production, and the understanding of coherent pion production is being progressed. In addition, future prospects of measurements of charged current single charged pion production in SciBooNE are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Final technical report for award NO. DE-FG02-95ER20206

ABSTRACT Initial work focused on the regulation of nitrite reductase, the defining reaction of denitrification as well as nitric oxide (NO) reductase. Expression of the genes encoding both proteins was controlled by NnrR. This regulator was shown to be responsive to NO. More recent work has shown NnrR function is also likely inhibited by oxygen. Therefore, it is this protein that sets the oxygen level at which nitrate respiration takes over from aerobic respiration. The gene encoding NO reductase appears to only require NnrR for expression. Expression of the gene encoding nitrite reductase is more complex. In addition to NnrR, a two component sensor regulator complex termed PrrA and PrrB is also required for expression. These proteins are global regulators and serve to link denitrification with other bioenergetic processes in the cell. They also provide an additional layer of oxygen dependent regulation. The sequencing of the R. sphaeroides 2.4.3 genome allowed us to identify several other genes regulated by NnrR. Surprisingly, most of the genes were not essential for denitrification. Their high level of conservation in related denitrifiers suggests they do provide a selectable benefit to the bacterium, however. We also examined the role of nitrate reductase in contributing to denitrification in R. sphaeroides. Strain 2.4.3 is unusual in having two distinct, but related clusters of genes encoding nitrate reductase. One of these genes clusters is expressed under high oxygen conditions but is repressed, likely by PrrB-PrrA, under low oxygen conditions. The other cluster is expressed only under low oxygen conditions. This cluster expresses the nitrate reductase used during denitrification. The high oxygen expressed cluster encodes a protein used for redox homeostasis. Surprisingly, both clusters are fully expressed even in the absence of nitrate. During the course of this work we found that the type strain of R. sphaeroides, 2.4.1, is a partial denitrifier because it has the nitrate and NO reductases but lacks nitrite reductase. Like 2.4.3 it uses NnrR to regulate NO reductase. This unexpected arrangement suggested that it may use NO reductase to detoxify NO produced in its environment. Using a green fluorescent protein based reporter system we were able to demonstrate that NO produced by a denitrifier such as 2.4.3 can induce expression of NO reductase in 2.4.1. We then went on to show that the NO produced by denitrifiers can induce a stress response in other non-denitrifying bacteria. This suggests that the NO produced during denitrification will have a significant impact on the non-denitrifiers present in the surrounding environment. We also expanded our studies to include the denitrifier Agrobacterium tumefaciens. We demonstrated that the expression of the nitrite and NO reductase genes in this bacterium follows the same general scheme as in R. sphaeroides. We also were able to show that this bacterium would induce NO reductase in response to the NO produced by plants. Importantly, we were able to demonstrate that A. tumefaciens had difficulty transitioning from aerobic respiration to denitrification if the transition was sudden. This difficulty manifested as an accumulation of NO. In some conditions cells were slowly able to switch modes of respiration but in other cases NO accumulations seemed to kill the cells. The difficulty in transition appears to be due to an inability to produce enough energy once the oxygen has been completely consumed.

54 ENVIRONMENTAL SCIENCES↗

Search for Third Generation Squarks in the Missing Transverse Energy plus Jet Sample at CDF Run II

The twentieth century leaves behind one of the most impressive legacies, in terms of human knowledge, ever achieved. In particular the StandardModel (SM) of particle physics has proven to be one of the most accurate descriptions of Nature. The level of accuracy of some theoretical predictions has never been attained before. It includes the electromagnetic interaction, and the weak and strong force, developing the Lagrangian from symmetry principles. There are two different types of fundamental constituents of Nature, in the framework of the Standard Model: bosons and fermions. Bosons are those particles responsible for carrying the interactions among the fermions, which constitute matter. Fermions are divide into six quarks and six leptons, forming a three-folded structure. All these fermions and bosons have an antimatter partner. However, several difficulties point along with the idea that the Standard Model is only an effective low energy theory. These limitations include the difficulty to incorporate gravity and the lack of justification to fine tuning of some perturbative corrections. Moreover, some regions of the theory are not understood, like the mass spectrum of the Standard Model or the mechanism for electroweak symmetry breaking. Supersymmetry is a newer theoretical framework, thought to adress the problems found in the Standard Model, while preserving all its predictive power. It introduces a new symmetry that relates a new boson to each SM fermion and a new fermion to each SM boson. In this way, for every existing boson in the SM it must exist a fermionic super-partner (named with a sufix ino), and likewise, for every fermion a bosonic super-partner (named with a prefix s) must also exist. Moreover, another symmetry called R-parity is introduced to prevent baryon and lepton number violating interactions. If R-parity is conserved, super-particles can only be pair-produced and they cannot decay completely in SM particles. This implies the existence of a lightest SUSY particle (LSP) which would provide a candidate for cold dark matter, that account for 23% of the universe content, as strongly suggested by recent astrophysical data [1]. The Tevatron is a hadron collider operating at Fermilab, USA. This accelerator provides proton-antiproton (p$\bar{p}$) collisions with a center of mass energy of √s = 1.96 TeV. CDF and D0 are the detectors built to analyse the products of the collisions provided by the Tevatron. Both experiments have produced a very significant scientific output in the last few years, like the discovery of the top quark or the measurement of the B s mixing. The Tevatron experiments are also reaching sensitivity to the SM Higgs boson. The scientific program of CDF includes a broad spectrum on searches for physics signatures beyond the Standard Model. Tevatron is still the energy frontier, what means an unique opportunity to produce a discovery in physic beyond the Standard Model. The analyses presented in this thesis focus on the search for third generation squarks in the missing transverse energy plus jets final state. The production of sbottom ($\tilde{b}$) and stop ($\tilde{t}$) quarks could be highly enhanced at the Tevatron, giving the possibility of discovering new physics or limiting the parameter space available in the theory. No signal is found over the predicted Standard Model background in both searches. Instead, 95% confidence level limits are set on the production cross section, and then translated into the mass plane of the hypothetical particles. This thesis sketches the basic theory concepts of the Standard Model and the Minimal Supersymmetric Extension in Chapter 2. Chapter 3, describes the Tevatron and CDF. Based on the CDF subsystems information, Chapter 4 and 5 describe the analysis objet reconstruction and the heavy flavor tagging tools. The development of the analyses is shown in Chapter 6 and Chapter 7. Finally, Chapter 8 is devoted to discuss the results and conclusions of this work, and future prospects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for Randall-Sundrum Gravitons in Dielectron and Diphoton Final States with 5.4fb -1 of DØ Data

A search for the lightest Kaluza-Klein mode of the graviton in the Randall-Sundrum model with a warped extra dimension is performed in the dielectron and diphoton channels. The data set used for the search corresponds to 5.4 fb -1 of data from p$\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV, collected with the D0 detector at the Fermilab Tevatron between July 2002 and Summer 2009. We search for resonances in the invariant mass spectrum of two electromagnetic showers from the decay of the graviton to either electron-positron pairs or photon pairs. To optimize the sensitivity, the dielectron and diphoton channels are analyzed separately, then the results are combined together in the end. We also investigate whether, due to the unique spin-2 nature of the graviton, the angular distribution of the final state particles can be used to significantly enhance the sensitivity of the search. We set 95% confidence level upper limits on the graviton production cross section times branching fraction into electron-positron pairs of between ~ 7 fb and ~ 0.5 fb for a range of graviton masses from 220 GeV and 1050 GeV, respectively. Compared with Randall-Sundrum model predictions, these results correspond to lower limits on the lightest graviton mass between 440 GeV and 1040 GeV, for the dimensionless graviton coupling to the Standard Model fields k/$\bar{M}$ Pl in the range from 0.01 to 0.1. In addition, for coupling k/$\bar{M}$ Pl of 0.01, gravitons with masses between 460 GeV and 560 GeV are also excluded at 95% confidence level. These results represent the most sensitive limits to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Standard Model Low Mass Higgs Search at CDF

This paper reports searches for the low mass Standard Model Higgs boson through the decay channel $H \to b\bar{b}$. The searches use data up to an integrated luminosity of 5.7$fb^{-1}$ accumulated in the CDF II detector. To achieve maximal sensitivity on the Higgs boson discovery, we analyze many channels: $WH \to \ell \nu b\bar{b}, ZH \to \nu \nu b\bar{b}, ZH \to \ell \ell b\bar{b}$, and $WH/ZH/VBF \to jj b\bar{b}$. To further improve the sensitivity of the analyses, discrimination between the Higgs boson signal and the large background is improved by employing sophisticated multivariate techniques. The number of observed events and resulting multivariate output distributions are consistent with the Standard Model expectations, and we set 95% confidence level (C.L.) upper limits on cross section of each process.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Partial Least Squares, Experimental Design, and Near-Infrared Spectrophotometry for the Remote Quantification of Nitric Acid Concentration and Temperature

Near-infrared spectrophotometry and partial least squares regression (PLSR) were evaluated to create a pleasantly simple yet effective approach for measuring HNO3 concentration with varying temperature levels. A training set, which covered HNO3 concentrations (0.1–8 M) and temperature (10–40 °C), was selected using a D-optimal design to minimize the number of samples required in the calibration set for PLSR analysis. The top D-optimal-selected PLSR models had root mean squared error of prediction values of 1.4% for HNO 3 and 4.0% for temperature. The PLSR models built from spectra collected on static samples were validated against flow tests including HNO 3 concentration and temperature gradients to test abnormal conditions (e.g., bubbles) and the model performance between sample points in the factor space. Based on cross-validation and prediction modeling statistics, the designed near-infrared absorption approach can provide remote, quantitative analysis of HNO 3 concentration and temperature for production-oriented applications in facilities where laser safety challenges would inhibit the implementation of other optical techniques (e.g., Raman spectroscopy) and in which space, time, and/or resources are constrained. The experimental design approach effectively minimized the number of samples in the training set and maintained or improved PLSR model performance, which makes the described chemometric approach more amenable to nuclear field applications.

07 ISOTOPE AND RADIATION SOURCES↗

Search for Production of Heavy Particles Decaying to Top Quarks and Invisible Particles in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

We present a search for a new particle T{prime} decaying to a top-quark via T{prime} {yields} t + X, where X is an invisible particle. In a data sample with 4.8 fb{sup -1} of integrated luminosity collected by the CDF II detector at Fermilab in p{bar p} collisions with {radical}s = 1.96 TeV, we search for pair production of T0 in the lepton+jets channel, p{bar p} {yields} t{bar t} + XX {yields} {ell}{nu}bqq{prime}b + XX. We interpret our results primarily in terms of a model where T{prime} are exotic fourth generation quarks and X are dark matter particles. The data are consistent with standard model expectations, and we set 95% confidence level limits on the generic production of T{prime}{bar T}{prime} {yields} t{bar t} + XX. We apply these limits to the dark matter model and exclude the fourth generation exotic quarks T{prime} at 95% confidence level up to m{sub T{prime}} = 360 GeV/c{sup 2} for m{sub x} {<=} 100 GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for Hadronic Decays of a Light Higgs Boson in the Radiative Decay

The authors search for hadronic decays of a light Higgs boson (A{sup 0}) produced in radiative decays of an {Upsilon}(2S) or {Upsilon}(3S) meson, {Upsilon} {yields} {gamma}A{sup 0}. The data have been recorded by the BABAR experiment at the {Upsilon}(3S) and {Upsilon}(2S) center of mass energies, and include (121.3 {+-} 1.2) x 10{sup 6} {Upsilon}(3S) and (98.3 {+-} 0.9) x 10{sup 6} {Upsilon}(2S) mesons. No significant signal is observed. We set 90% confidence level upper limits on the product branching fractions {beta}({Upsilon}(nS) {yields} {gamma}A{sup 0}) {center_dot} {beta}(A{sup 0} {yields} hadrons) (n = 2 or 3) that range from 1 x 10{sup -6} for an A{sup 0} mass of 0.3 GeV/c{sup 2} to 8 x 10{sup -5} at 7 GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗