Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Langley analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Optimizing tuning masses for helicopter rotor blade vibration reduction including computed airloads and comparison with test data

The development and validation of an optimization procedure to systematically place tuning masses along a rotor blade span to minimize vibratory loads are described. The masses and their corresponding locations are the design variables that are manipulated to reduce the harmonics of hub shear for a four-bladed rotor system without adding a large mass penalty. The procedure incorporates a comprehensive helicopter analysis to calculate the airloads. Predicting changes in airloads due to changes in design variables is an important feature of this research. The procedure was applied to a one-sixth, Mach-scaled rotor blade model to place three masses and then again to place six masses. In both cases the added mass was able to achieve significant reductions in the hub shear. In addition, the procedure was applied to place a single mass of fixed value on a blade model to reduce the hub shear for three flight conditions. The analytical results were compared to experimental data from a wind tunnel test performed in the Langley Transonic Dynamics Tunnel. The correlation of the mass location was good and the trend of the mass location with respect to flight speed was predicted fairly well. However, it was noted that the analysis was not entirely successful at predicting the absolute magnitudes of the fixed system loads.

Pritchard, Jocelyn I.↗
NASA NTRS2015

Composite Structure Modeling and Analysis of Advanced Aircraft Fuselage Concepts

NASA Environmentally Responsible Aviation (ERA) project and the Boeing Company are collabrating to advance the unitized damage arresting composite airframe technology with application to the Hybrid-Wing-Body (HWB) aircraft. The testing of a HWB fuselage section with Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) construction is presently being conducted at NASA Langley. Based on lessons learned from previous HWB structural design studies, improved finite-element models (FEM) of the HWB multi-bay and bulkhead assembly are developed to evaluate the performance of the PRSEUS construction. In order to assess the comparative weight reduction benefits of the PRSEUS technology, conventional cylindrical skin-stringer-frame models of a cylindrical and a double-bubble section fuselage concepts are developed. Stress analysis with design cabin-pressure load and scenario based case studies are conducted for design improvement in each case. Alternate analysis with stitched composite hat-stringers and C-frames are also presented, in addition to the foam-core sandwich frame and pultruded rod-stringer construction. The FEM structural stress, strain and weights are computed and compared for relative weight/strength benefit assessment. The structural analysis and specific weight comparison of these stitched composite advanced aircraft fuselage concepts demonstrated that the pressurized HWB fuselage section assembly can be structurally as efficient as the conventional cylindrical fuselage section with composite stringer-frame and PRSEUS construction, and significantly better than the conventional aluminum construction and the double-bubble section concept.

Mukhopadhyay, Vivek↗
NASA NTRS1983

Pressure system recertification at NASA-Langley Research Center

Langley Research Center pressure systems are being recertified to ensure safe operation of these systems. The procedures for recertifying these pressure systems are reviewed. Generally, the analysis and inspection requirements outlined in the appropriate national consensus codes are followed. In some instances where the requirements of these codes are not met. The systems are analyzed further, repaired, modified and/or tested to demonstrate their structural integrity.

Hudson, C. M.↗
NASA NTRS1987

Error propagation in a digital avionic mini processor

A methodology is introduced and demonstrated for the study of error propagation from the gate to the chip level. The importance of understanding error propagation derives from its close tie with system activity. In this system the target system is BDX-930, a digital avionic multiprocessor. The simulator used was developed at NASA-Langley, and is a gate level, event-driven, unit delay, software logic simulator. An approach is highly structured and easily adapted to other systems. The analysis shows the nature and extent of the dependency of error propagation on microinstruction type, assembly level instruction, and fault-free gate activity.

Lomelino, Dale L.↗
NASA NTRS1994

Applications of automatic differentiation in computational fluid dynamics

Automatic differentiation (AD) is a powerful computational method that provides for computing exact sensitivity derivatives (SD) from existing computer programs for multidisciplinary design optimization (MDO) or in sensitivity analysis. A pre-compiler AD tool for FORTRAN programs called ADIFOR has been developed. The ADIFOR tool has been easily and quickly applied by NASA Langley researchers to assess the feasibility and computational impact of AD in MDO with several different FORTRAN programs. These include a state-of-the-art three dimensional multigrid Navier-Stokes flow solver for wings or aircraft configurations in transonic turbulent flow. With ADIFOR the user specifies sets of independent and dependent variables with an existing computer code. ADIFOR then traces the dependency path throughout the code, applies the chain rule to formulate derivative expressions, and generates new code to compute the required SD matrix. The resulting codes have been verified to compute exact non-geometric and geometric SD for a variety of cases. in less time than is required to compute the SD matrix using centered divided differences.

Green, Lawrence L.↗
NASA NTRS1973

Evaluation of LRC Spectral Analyses of Simulated Gust Velocity Data

The NASA Langley Research Center (LRC) has been computing power spectra of simulated atmospheric turbulence data by various techniques, in preparation for the B-57 gust velocity data analysis program. The results of these studies have confirmed earlier suspicions that conventional first-difference pre-whitening of gust velocity data can produce serious distortions in the spectral densities at very low frequencies (below the frequency of the gust velocity spectral "knee"). The results also indicate that the frequency averaging procedures have certain merits over ensemble averaging procedures in the computation of spectra by direct Fourier transform operations. Finally, the results do not reveal any significant difference in the spectral estimates obtained using Hann versus Parzen smoothing procedures.

Piersol, Allan G.↗
NASA NTRS2006

Advanced Visualization of Experimental Data in Real Time Using LiveView3D

LiveView3D is a software application that imports and displays a variety of wind tunnel derived data in an interactive virtual environment in real time. LiveView3D combines the use of streaming video fed into a three-dimensional virtual representation of the test configuration with networked communications to the test facility Data Acquisition System (DAS). This unified approach to real time data visualization provides a unique opportunity to comprehend very large sets of diverse forms of data in a real time situation, as well as in post-test analysis. This paper describes how LiveView3D has been implemented to visualize diverse forms of aerodynamic data gathered during wind tunnel experiments, most notably at the NASA Langley Research Center Unitary Plan Wind Tunnel (UPWT). Planned future developments of the LiveView3D system are also addressed.

Schwartz, Richard J.↗
NASA NTRS2008

Detailed Uncertainty Analysis for Ares I Ascent Aerodynamics Wind Tunnel Database

A detailed uncertainty analysis for the Ares I ascent aero 6-DOF wind tunnel database is described. While the database itself is determined using only the test results for the latest configuration, the data used for the uncertainty analysis comes from four tests on two different configurations at the Boeing Polysonic Wind Tunnel in St. Louis and the Unitary Plan Wind Tunnel at NASA Langley Research Center. Four major error sources are considered: (1) systematic errors from the balance calibration curve fits and model + balance installation, (2) run-to-run repeatability, (3) boundary-layer transition fixing, and (4) tunnel-to-tunnel reproducibility.

Hemsch, Michael J.↗
NASA NTRS2011

Design, Optimization and Evaluation of Integrally Stiffened Al 7050 Panel with Curved Stiffeners

A curvilinear stiffened panel was designed, manufactured, and tested in the Combined Load Test Fixture at NASA Langley Research Center. The panel was optimized for minimum mass subjected to constraints on buckling load, yielding, and crippling or local stiffener failure using a new analysis tool named EBF3PanelOpt. The panel was designed for a combined compression-shear loading configuration that is a realistic load case for a typical aircraft wing panel. The panel was loaded beyond buckling and strains and out-of-plane displacements were measured. The experimental data were compared with the strains and out-of-plane deflections from a high fidelity nonlinear finite element analysis and linear elastic finite element analysis of the panel/test-fixture assembly. The numerical results indicated that the panel buckled at the linearly elastic buckling eigenvalue predicted for the panel/test-fixture assembly. The experimental strains prior to buckling compared well with both the linear and nonlinear finite element model.

Slemp, Wesley C. H.↗
NASA NTRSDate not supplied

Hail Storm Risk Assessment Using Space-Borne Remote Sensing Observations and Reanalyses

Much of the world is impacted by severe thunderstorms, but whether they become disasters depends upon resilience--our capacity to prepare, mitigate, respond, and recover. Hail is the costliest severe weather hazard for the insurance industry, generating ~70% of severe convective storm losses due to damage to assets such as homes, businesses, agriculture, and infrastructure. Most insurance companies do not reserve enough capital to cover catastrophes, so they acquire reinsurance. The reinsurance industry uses catastrophe models (CatModels) to statistically estimate risk to an insurer’s portfolio. Hail CatModels are developed with climatologies that define hailstorm frequency and severity. Hail-prone areas can be defined using hail reports from trained spotters, the media, and the general public. Extremely severe hail (2+ inch diameter) occurs nearly every day across the world. Weather radars can detect hail because hailstones strongly reflect microwave signals that they emit. However, hail climatologies are difficult to derive because hail covers small areas and there are neither hail reporting mechanisms (e.g. website or mobile app) nor radar networks in most places outside the US and Europe. This lack of ground truth on severe hail puts society and economies at risk. Hail is generated within storms by strong updrafts. These updrafts exhibit unique signatures in NASA and other agency satellite observations, offering new opportunities for hailstorm analysis. Geostationary (GEO) visible and infrared imagery has been collected for ~15-25 years across the world (region dependent) and methods have been developed at NASA Langley Research Center (LaRC) to detect hailstorm updrafts using GEO imagery. Climatological GEO updraft data has been used by Willis Towers Watson (WTW), a leader in catastrophe risk assessment for the insurance industry, and Karlsruhe Institute of Technology to develop CatModels over Europe and Australia. Hail can also be inferred with passive microwave imagery collected by low-Earth-orbiting sensors such as the GPM GMI, TRMM TMI, AMSR-E, AMSR-2, SSM/I, and SSMIS over the last 20+ years using methods developed at the Marshall Space Flight Center (MSFC). Hailstorms generate enhanced lightning flash rates that can be tracked using new GOES-R series GEO Lightning Mapping (GLM) imagery. Atmospheric reanalyses can be used to define favorable hailstorm environments for combination with the satellite-based storm detections. This presentation will describe a framework for developing continental to global hail climatologies and CatModels based on NASA satellite data and capabilities. This is a collaboration between LaRC and MSFC, WTW, and partners in Brazil, Argentina, and South Africa. This project seeks to mitigate hail disasters by aiding development of new satellite-based severe storm nowcasting tools by regional partners and developing climatologies to improve societal understanding of hail frequency. GEOO visible and infrared metrics of storm intensity, environmental conditions based on reanalyses, spotter hail reports and radar MESH observations are intercompared to quantify the detectability of hailstorms, and our ability to discriminate hailstorms from other severe storms. We are also maturing methods using land surface imaging satellite data (e.g. MODIS, Landsat, Sentinel 1 and 2) to identify hail damage to agriculture. Work with WTW will improve socioeconomic resilience through development of new CatModels. Southern Brazil, Uruguay, Paraguay, and Argentina feature some of the most intense thunderstorms on Earth. South America and South Africa are developing insurance markets of interest to WTW clients, and is similar to other regions routinely impacted by hail that do not have comprehensive hail reporting or radars to assess hailstorm frequency. Project datasets will be made available via online GIS-enabled tools developed at the LaRC Atmospheric Science Data Center (ASDC) which will visualize data and provide it in multiple formats for use in a wide range of open source and commercial tools.

Kristopher Michael Bedka↗
NASA NTRS2022

2022 Power Global Community (Gloco) Summit Summary Report

The Prediction Of Worldwide Energy Resources (POWER) Project 25th year of providing global solar and meteorology data products to the world. The goals of this event were to inform users of new, enhanced features, gather feedback on services, identify new requests and requirements, and capture more thorough user stories while identifying new user communities and partnership opportunities. The event was “virtual” and had over 580 registrants. Over the two-day event, the Summit was attended by 162 unique attendees representing 24 countries.

NASA↗
NASA NTRS2023

Finite Element Simulation of Three Full-Scale Crash Tests for Cessna 172 Aircraft

The NASA Emergency Locator Transmitter Survivability and Reliability project was initiated in 2013 to assess the crash performance standards for the next generation of emergency locator transmitter (ELT) systems. Three Cessna 172 aircraft were acquired to perform crash testing at the NASA Langley Research Center Landing and Impact Research Facility. Full-scale crash tests were conducted in the summer of 2015, and each test article was subjected to severe, but survivable, impact conditions including a flare-to-stall during emergency landing and two controlled-flight-into-terrain scenarios. Finite element analyses were performed to numerically simulate the aircraft response to the crash tests. The first test simulated impacting a concrete surface represented analytically by a rigid plane. Tests 2 and 3 simulated impacting a dirt surface represented analytically by an Eulerian grid of brick elements using a Mohr–Coulomb material model. The objective of this paper is to summarize the test and analysis results for the three full-scale crash tests. Simulation models of the airframe that correlate well with the tests are needed for future studies of alternate ELT mounting configurations.

Finite Element Analysis↗
NASA NTRS2010

FUN3D Grid Refinement and Adaptation Studies for the Ares Launch Vehicle

This paper presents grid refinement and adaptation studies performed in conjunction with computational aeroelastic analyses of the Ares crew launch vehicle (CLV). The unstructured grids used in this analysis were created with GridTool and VGRID while the adaptation was performed using the Computational Fluid Dynamic (CFD) code FUN3D with a feature based adaptation software tool. GridTool was developed by ViGYAN, Inc. while the last three software suites were developed by NASA Langley Research Center. The feature based adaptation software used here operates by aligning control volumes with shock and Mach line structures and by refining/de-refining where necessary. It does not redistribute node points on the surface. This paper assesses the sensitivity of the complex flow field about a launch vehicle to grid refinement. It also assesses the potential of feature based grid adaptation to improve the accuracy of CFD analysis for a complex launch vehicle configuration. The feature based adaptation shows the potential to improve the resolution of shocks and shear layers. Further development of the capability to adapt the boundary layer and surface grids of a tetrahedral grid is required for significant improvements in modeling the flow field.

Bartels, Robert E.↗
NASA NTRSDate not supplied

Establishing the Framework for e-VTOL Flight Mission Scenario Development for Urban Air Mobility Research using Cognitive Task Analysis

This paper focuses on applying specific protocol aspects of Cognitive Task Analysis (CTA) methods to formulate non-routine flight mission use-case scenarios in support of a potential research study at the National Aeronautics and Space Administration (NASA) Langley Research Center under the Air Traffic Management – eXploration (ATM-X) Urban Air Mobility (UAM) sub-project. The objective of use-case scenarios is to provide a hypothetical situation to elicit expert knowledge and feedback in a specific subject matter area. Use-case scenarios in the field of aviation, including UAM, can help to support the safe integration of these vehicles into the National Airspace System (NAS) through the examination of airspace procedures during non-routine events. Inherent in this type of research is the need to study in-flight non-routine scenarios that the UAM vehicle could encounter. Situations categorized as non-routine events are any events that occur outside of the original flight plan such as a mechanical malfunction or other in-flight emergency requiring special procedures, which can include diversions to a specified, or non-specified, emergency landing area. In specific instances, some non-routine events could be considered as “routine” during in-flight operations, such as the need to perform a go-around due to a balked landing. As the rate of technological expansion surrounding UAM grows rapidly in modern aviation, so does the need for research that focuses on the safe integration of these vehicles including research with a focus on the methods and development of airspace operational procedures. Research rooted in CTA methods provides a framework for developing use-case scenarios appropriate for environments where mental demands are substantial. Substantial mental demands exist while operating in the NAS for pilots, airline dispatchers, and air traffic controllers among many others. With the focus on UAM in mind, it is critical to frame a baseline use-case scenario using information as it pertains to current-day airspace operations. According to Dr. Robert R. Hoffman’s “Protocols for Cognitive Task Analysis,” one of the first steps to applying CTA methods to research is the concept of “bootstrapping” in which the researcher(s) familiarize themselves with the domain that is being studied. To formulate the non-routine flight mission use-case scenarios for the purpose of this potential NASA ATM-X UAM research study, and to inform the baseline use-case scenario, the practice of bootstrapping was utilized to acquire knowledge of current-day airspace procedures.

Heidi S Glaudel↗
NASA NTRS2013

Conceptual Design and Structural Analysis of an Open Rotor Hybrid Wing Body Aircraft

Through a recent NASA contract, Boeing Research and Technology in Huntington Beach, CA developed and optimized a conceptual design of an open rotor hybrid wing body aircraft (HWB). Open rotor engines offer a significant potential for fuel burn savings over turbofan engines, while the HWB configuration potentially allows to offset noise penalties through possible engine shielding. Researchers at NASA Langley converted the Boeing design to a FLOPS model which will be used to develop take-off and landing trajectories for community noise analyses. The FLOPS model was calibrated using Boeing data and shows good agreement with the original Boeing design. To complement Boeing s detailed aerodynamics and propulsion airframe integration work, a newly developed and validated conceptual structural analysis and optimization tool was used for a conceptual loads analysis and structural weights estimate. Structural optimization and weight calculation are based on a Nastran finite element model of the primary HWB structure, featuring centerbody, mid section, outboard wing, and aft body. Results for flight loads, deformations, wing weight, and centerbody weight are presented and compared to Boeing and FLOPS analyses.

Gern, Frank H.↗
NASA NTRS1993

An experimental and analytical study of a lifting-body wind-tunnel model exhibiting body-freedom flutter

Flutter analysis of the proposed National Aerospace Plane indicates that in the subsonic to transonic flight regime, the vehicle may be susceptible to an instability known as body-freedom flutter. Body-freedom flutter is a dynamic instability involving a vehicle rigid-body mode coupling with one or more of the vehicle's elastic modes. In the case of the NASP, the body-freedom flutter predicted by analysis involves the short-period mode of the vehicle coupling with the pivot mode of the all-movable wings. A wind-tunnel test was designed to investigate this phenomenon. Parameter studies included variations in wing-actuator stiffness, wing-pivot shaft location along the root chord, and thickness of the fuselage. The wind-tunnel test was conducted in the NASA Langley Transonic Dynamics Tunnel. Flutter boundaries were measured in the wind tunnel for three configurations and a model divergence point was measured on a fourth configuration. At the last flutter point obtained during the test, body-freedom flutter proved to be rather violent. The analysis used in this study incorporated thin-wing theory aerodynamics and did a fairly good job of predicting the flutter boundaries.

Soistmann, David L.↗