Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Homogenization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

High-efficiency, anode-free lithium–metal batteries with a close-packed homogeneous lithium morphology

Anode-free lithium–metal batteries (LMBs) are ideal candidates for high-capacity energy storage as they eliminate the need for a conventional graphite electrode or excess lithium–metal anode. Current anode-free LMBs suffer from low Coulombic efficiency (CE) due to poor lithium stripping efficiency. Advanced electrolyte development is a promising route to maximize lithium plating and stripping CE and minimize capacity fade. However, a poor understanding of the mechanisms by which advanced electrolytes improve performance hampers progress in the practical development of anode-free LMBs. Here, we use synchrotron techniques and other tools to analyze the influence of three commercially available electrolytes on the composition, heterogeneity, kinetics, morphology, and electrochemistry of anode-free LMBs. Advanced electrolytes improve the electrochemical performance of anode-free LMBs by forming much denser and better-packed Li morphologies on a Cu current collector than on the conventional electrolyte. Li plates uniformly over the electrode area with the advanced electrolytes rather than in a few active sites. Inactive crystalline Li with heterogeneous distribution dominates the capacity degradation of anode-free cells, especially with the conventional electrolyte, indicating that reducing the amount of “dead” crystalline Li will significantly improve the cycling stability of anode-free cells. Finally, the understanding of the Li plating and stripping process obtained from this work will accelerate the development of anode-free LMBs with high efficiency.

25 ENERGY STORAGE↗

Elimination of homogeneous broadening in 1 H solid-state NMR

1 H solid-state NMR spectra are plagued by low resolution, necessitating the use of complex pulse sequences or specialized equipment. Here, we introduce a new resolution enhancement method, inspired by super-resolution microscopy, that uses a 2D Hahn-echo experiment to constrain deconvolution. The result is an effective doubling of the MAS frequency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Field Theories with Homogeneous Momentum Space

We discuss the construction of a scalar field theory with momentum space given by a coset. By introducing a generalized Fourier transform, we show how the dual scalar field theory actually lives in Snyder's space-time. As a side-product we identify a star product realization of Snyder's non-commutative space, but also the deformation of the Poincare symmetries necessary to have these symmetries realized in Snyder's space-time. A key feature of the construction is that the star product is non-associative.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An alternate approach to study electrostatic solitary waves in homogeneous and inhomogeneous quantum magnetoplasmas

Ion acoustic drift solitary wave is studied in both linear and nonlinear regimes in an electron-ion quantum magnetoplasma. It is shown that using the linear dispersion relation, nonlinear Zakharov-Kuznetsov (ZK) equation can be derived in an inhomogeneous quantum magnetoplasma for ion acoustic drift solitary wave in a certain parametric range. The solution of the ZK equation is also presented using the tangent hyperbolic method. It is found that the quantum Bohm potential (via increasing number density), angle of propagation, and the magnetic field affect the propagation characteristics of the nonlinear quantum ion acoustic drift wave. The results presented in this paper may be beneficial to understand the formation of electrostatic drift solitary waves in dense magnetized plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Monte Carlo and Analytical Calculation of Lateral Deflection of Proton Beams in Homogeneous Targets

Proton radiation therapy is a precise form of radiation therapy, but the avoidance of damage to critical normal tissues and the prevention of geographical tumor misses require accurate knowledge of the dose delivered to the patient and the verification of his position demand a precise imaging technique. In proton therapy facilities, the X-ray Computed Tomography (xCT) is the preferred technique for the planning treatment of patients. This situation has been changing nowadays with the development of proton accelerators for health care and the increase in the number of treated patients. In fact, protons could be more efficient than xCT for this task. One essential difficulty in pCT image reconstruction systems came from the scattering of the protons inside the target due to the numerous small-angle deflections by nuclear Coulomb fields. The purpose of this study is the comparison of an analytical formulation for the determination of beam lateral deflection, based on Moliere's theory and Rutherford scattering with Monte Carlo calculations by SRIM 2008 and MCNPX codes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Low temperature plasma enhanced chemical vapor deposition of thin films combining mechanical stiffness, electrical insulation, and homogeneity in microcavities

The deposition of hydrogenated amorphous carbon (a-C:H) as well as hydrogenated amorphous silicon carbonitride (SiCN:H) films was investigated in view of a simultaneous realization of a minimum Young's modulus (>70 GPa), a high electrical insulation ({>=}1 MV/cm), a low permittivity and the uniform coverage of microcavities with submillimeter dimensions. For the a-C:H deposition the precursors methane (CH{sub 4}) and acetylene (C{sub 2}H{sub 2}) were used, while SiCN:H films were deposited from mixtures of trimethylsilane [SiH(CH{sub 3}){sub 3}] with nitrogen and argon. To realize the deposition of micrometer thick films with the aforementioned complex requirements at substrate temperatures {<=}200 deg. C, several plasma enhanced chemical vapor deposition methods were investigated: the capacitively coupled rf discharge and the microwave electron cyclotron resonance (ECR) plasma, combined with two types of pulsed substrate bias. SiCN:H films deposited at about 1 Pa from ECR plasmas with pulsed high-voltage bias best met the requirements. Pulsed biasing with pulse periods of about 1 {mu}s and amplitudes of about -2 kV was found to be most advantageous for the conformal low temperature coating of the microtrenches, thereby ensuring the required mechanical and insulating film properties.

36 MATERIALS SCIENCE↗

High homogeneity 25 cm low-energy rf ion source with inherent electron compensation

A 25 cm single-grid low-energy rf ion source with inherent electron compensation is described and characterized. Measurements were carried out using Ar and CF{sub 4} filling gas. The dependence of the ion beam current to the target as well as the current partition between the beam fast and slow ions on the rf discharge pressure for both filling gases is discussed. The unique ability of generation of coinciding ion and electron flows is demonstrated and the measured ion and electron energy distribution functions are presented as well. The developed broad ion beam source is able of providing 0.5-5 mA/cm{sup 2} current density in the low ion energy range of 50-250 eV, with possibility of independent current density and energy control. It is shown that complementing the rf plasma source with a profiling electrode allows for CF{sub 4} ion source operation attaining {+-}5% ion beam uniformity over 250 mm in diameter. The presented CF{sub 4} etching test results exhibit the possibility of highly directional anisotropic Si and SiO{sub 2} etching utilizing the developed single grid rf ion source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On the Homogenization of a Damped Wave Equation

The goal of this paper is to analyze the effective behavior of the solution of a wave equation with interior and boundary damping, defined in a periodically perforated medium. We deal, at the microscale, with an {epsilon}-periodic structure obtained by removing from a bounded connected open set {Omega} in R{sup n} a number of closed subsets of characteristic size {epsilon}. As a result, we obtain a perforated domain {Omega}{sup {epsilon}}, in which we consider a wave equation, with interior sources and damping and with dynamic boundary conditions imposed on the boundaries of the perforations. Assuming suitable initial conditions, we prove that the asymptotic behavior, as the small parameter e which characterizes the size of the perforations tends to zero, of the solution of such a problem is governed by a parabolic equation, defined on the entire domain {Omega}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear evolution of an arbitrary density perturbation in a cold homogeneous unmagnetized plasma

An exact and general analytical solution describing the nonlinear evolution of a large amplitude plasma oscillation initiated by an arbitrary density perturbation which can be expressed as a Fourier series in x is found. This general solution is first used to reproduce the earlier results of R. C. Davidson and P. P. Schram [Nucl. Fusion 8, 183 (1968)] and J. M. Dawson [Phys. Rev. 113, 383 (1959)] using appropriate initial conditions and later applied to derive the space time evolution for a square wave and a triangular wave. It is found that the addition of a second harmonic increases the wave breaking limit of the fundamental mode. Analytical results pertaining to this two mode case have been verified using one-dimensional particle-in-cell simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shocks, explosions, and vortices in two-dimensional homogeneous quantum magnetoplasma

Using the quantum hydrodynamic model for a uniform quantum magnetoplasma, and considering that the collision between ions and neutrals is dominant, a two-dimensional nonlinear system is derived. The linear dispersion relation is obtained and thus the variations of the dispersion relation with the obliqueness angle and density are discussed in detail. Shock, explosion, and vortex solutions of the nonlinear system are obtained. It is found that increasing the plasma density may enhance the strength of the shock and the width of the explosion. However, the higher the collision frequency is, the weaker the shock and the narrower the explosion will be. The temporal and spatial distributions for the vortex potential are studied. Spatially, it forms a periodic vortex street. Temporally, the vortex street may evolve in various ways owing to the arbitrary function of time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Homogeneous nano-patterning using plasmon-assisted photolithography

We report an innovative lithography system appropriate for fabricating sharp-edged nanodot patterns with nanoscale accuracy using plasmon-assisted photolithography. The key technology is two-photon photochemical reactions of a photoresist induced by plasmonic near-field light and the scattering component of the light in a photoresist film. The scattering component of the light is a radiation mode from higher order localized surface plasmon resonances scattered by metallic nanostructures.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy of InAlN lattice-matched to GaN with homogeneous composition using ammonia as nitrogen source

InAlN lattice-matched to GaN was grown by molecular beam epitaxy (MBE) using ammonia as the nitrogen source. The alloy composition, growth conditions, and strain coherence of the InAlN were verified by high resolution x-ray diffraction {omega}-2{theta} scans and reciprocal space maps. Scanning transmission electron microscopy and energy-dispersive x-ray spectroscopy of the InAlN revealed the absence of lateral composition modulation that was observed in the films grown by plasma-assisted MBE. InAlN/AlN/GaN high electron mobility transistors with smooth surfaces were fabricated with electron mobilities exceeding 1600 cm{sup 2}/Vs and sheet resistances below 244 {Omega}/sq.

36 MATERIALS SCIENCE↗