Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Coatings for Oxidation and Hot Corrosion Protection of Disk Alloys

Increasing temperatures in aero gas turbines is resulting in oxidation and hot corrosion attack of turbine disks. Since disks are sensitive to low cycle fatigue (LCF), any environmental attack, and especially hot corrosion pitting, can potentially seriously degrade the life of the disk. Application of metallic coatings are one means of protecting disk alloys from this environmental attack. However, simply the presence of a metallic coating, even without environmental exposure, can degrade the LCF life of a disk alloy. Therefore, coatings must be designed which are not only resistant to oxidation and corrosion attack, but must not significantly degrade the LCF life of the alloy. Three different Ni-Cr coating compositions (29, 35.5, 45wt. Cr) were applied at two thicknesses by Plasma Enhanced Magnetron Sputtering (PEMS) to two similar Ni-based disk alloys. One coating also received a thin ZrO2 overcoat. The coated samples were also given a short oxidation exposure in a low PO2 environment to encourage chromia scale formation. Without further environmental exposure, the LCF life of the coated samples, evaluated at 760C, was less than that of uncoated samples. Hence, application of the coating alone degraded the LCF life of the disk alloy. Since shot peening is commonly employed to improve LCF life, the effect of shot peening the coated and uncoated surface was also evaluated. For all cases, shot peening improved the LCF life of the coated samples. Coated and uncoated samples were shot peened and given environmental exposures consisting of 500 hrs of oxidation followed by 50 hrs of hot corrosion, both at 760C). The high-Cr coating showed the best LCF life after the environmental exposures. Results of the LCF testing and post-test characterization of the various coatings will be presented and future research directions discussed.

LCF life↗

The UK Met Office GCM with a Sophisticated Radiation Scheme Applied to the Hot Jupiter HD 209458b

To study the complexity of hot Jupiter atmospheres revealed by observations of increasing quality, we have adapted the UK Met Office Global Circulation Model (GCM), the Unified Model (UM), to these exoplanets. The UM solves the full 3D Navier-Stokes equations with a height-varying gravity, avoiding the simplifications used in most GCMs currently applied to exoplanets. In this work we present the coupling of the UM dynamical core to an accurate radiation scheme based on the two-stream approximation and correlated-k method with state-of-the-art opacities from ExoMol. Our first application of this model is devoted to the extensively studied hot Jupiter HD 209458b. We derive synthetic emission spectra and phase curves, and compare them to both previous models also based on state-of-the-art radiative transfer, and to observations. We find a reasonable a agreement between observations and both our days side emission and hot spot offset, however, our night side emissions is too large. Overall our results are qualitatively similar to those found by Showman et al. (2009) with the SPARCMIT gcm, however, we note several quantitative differences: Our simulations show significant variation in the position of the hottest part of the atmosphere with pressure, as expected from simple timescale arguments, and in contrast to the vertical coherency found by Showman et al. (2009). We also see significant quantitative differences in calculated synthetic observations. Our comparisons strengthen the need for detailed intercomparisons of dynamical cores, radiation schemes and post-processing tools to understand these differences. This effort is necessary in order to make robust conclusions about these atmospheres based on GCM results.

radiation↗

A Superconducting Hot Electron Bolometer Mixer for 530 GHz

This paper describes a superconducting hot electron bolometer mixer that uses diffusion rather than interactions with phonons as a cooling mechanism for the hot electrons. The bolometer is a 0.14 µm; wide niobium microbridge with a length less than 0.5 µm;. The submicron length ensures rapid diffusion of the hot electrons into contacting gold films. This mechanism is believed to be fast enough to allow mixer operation with intermediate frequencies of several GHz. An electron cooling time of 55 ps is inferred from DC resistance versus temperature measurements, indicating a roll-off frequency close to 3 GHz. Initial receiver measurements using a two-tuner waveguide mixer confirm heterodyne mixing at 532 GHz with an intermediate frequency of 1.4 GHz.

bolometer↗

TOI 564 b and TOI 905 b: Grazing and Fully Transiting Hot Jupiters Discovered by TESS

We report the discovery and confirmation of two new hot Jupiters discovered by the Transiting Exoplanet Survey Satellite(TESS): TOI 564 b and TOI 905 b. The transits of these two planets were initially observed by TESS with orbital periods of 1.651 and 3.739 days, respectively. We conducted follow-up observations of each system from the ground, including photometry in multiple filters, speckle interferometry, and radial velocity measurements. For TOI 564 b, our global fitting revealed a classical hot Jupiter with a mass of-+1.4630.0960.10MJand a radius of-+1.020.290.71RJ. Also a classical hot Jupiter, TOI 905 b has a mass of-+0.6670.0410.042MJand radius of-+1.1710.0510.053RJ. Both planets orbit Sun-like, moderately bright, mid-G dwarf stars with V11. While TOI 905 b fully transits its star, we found that TOI 564 b has a very high transit impact parameter of-+0.9940.0490.083, making it one of only∼20 known systems to exhibit a grazing transit and one of the brightest host stars among them. Therefore, TOI 564 b is one of the most attractive systems to search for additional nontransiting, smaller planets by exploiting the sensitivity of grazing transits to small changes in inclination and transit duration over a timescale of several years.

Exoplanet astronomy↗

TESS Spots a Hot Jupiter with an Inner Transiting Neptune

Hot Jupiters are rarely accompanied by other planets within a factor of a few in orbital distance. Previously, only two such systems have been found. Here, we report the discovery of a third system using data from the Transiting Exoplanet Survey Satellite (TESS). The host star, TOI-1130, is an eleventh magnitude K-dwarf in Gaia G-band. It has two transiting planets: a Neptune-sized planet (3.65±0.10 Rꚛ) with a 4.1 days period, and a hot Jupiter (-1.50(+0.22,-0.27) R(J)) with an 8.4 days period. Precise radial-velocity observations show that the mass of the hot Jupiter is -0.974(+0.044, 0.043) M(J). For the inner Neptune, the data provide only an upper limit on the mass of 0.17M(J)(3σ). Nevertheless, we are confident that the inner planet is real, based on follow-up ground-based photometry and adaptive-optics imaging that rule out other plausible sources of the TESS transit signal. The unusual planetary architecture of and the brightness of the host star make TOI-1130 a good test case for planet formation theories, and an attractive target for future spectroscopic observations.

Exoplanet astronomy↗

Worswick Hot Springs: A Radioactive Hydrothermal Field Site.

Introduction: We report on a systematic characterization of the environmental conditions at Worswick Hot Springs, a hydrothermal system in Idaho, USA. Because localized “hot spots” of elevated radiation and biofilms are easily accessible, various biological studies of radiation resistance and biosignature formation are possible, making this fieldsite relevant for analog field studies that consider microbiology, geo-chemistry, and ionizing radiation. In addition to Worswick being a natural radiation biology laboratory that may also be relevant for space biology applications, we assert that these unusual environmental conditions may inform us about locations on Mars that are also enriched in radioactive elements and their poten-tial for hosting biosignatures. Methods: We carried out repeated temperature and radiation measurements at the same hot spring locations to observe the system over time (Figure 2). Radiation: A Bicron Micro Analyst micro-r-meter (Bicron NE, Saint-Gobain Industrial Ceramics, Inc.) capable of sensing x-rays and gamma-rays (0-5000 µR/hr), was used to gather radiation data at twenty-four locations around and above the region of the two main stream channels. Water Temperature: A digital hand-held infrared thermometer (Oakton WD-39642-00 Mini-Temp Tester) was used for all measurements. ICP-MS aqueous geochemistry: Water samples were analyzed at the ISU Center for Archaeology, Materials and Applied Spectroscopy (CAMAS). Results: We have discovered localized areas of elevated radiation that are approximately 4 to 5 times greater than background radiation, and we have ob-served that both radioactivity and temperature of the spring waters vary over time. ICP-MS reveal the presence of thorium and uranium, which are correlated with elevated radioactivity. Several point sources of elevated radioactivity have been identified in both Stream A and Stream B.

Analog↗

Hot Cracking Behavior and Beam-Induced Grain Refinement in Electron Beam Freeform Fabricated Al 7075

Electron beam freeform fabrication (EBF 3 ) is a high deposition rate, wire-based directed energy deposition (DED) additive manufacturing (AM) process used to print metallic parts in a vacuum environment. While high specific strength 7xxx-series Al alloys are of interest in the aerospace and automotive industries, these alloys suffer from hot cracking issues during fusion welding and AM. In this work, linear deposits of Al 7075 were fabricated with EBF 3 to study the effects of baseplate thickness, preheat temperature, and beam focus on hot cracking behavior. Solidification cracks were observed in the first deposition layer, and by the third layer coalesced into large “macrocracks” running vertically through the build height. Fine, intergranular liquation “microcracks” appeared between macrocracks below the root of the final deposit layer fusion zone. Increasing the substrate preheat temperature from 165°C to 320°C deepened the partially melted zone and resulted in a more than twofold increase in the liquation microcrack density. Analysis of Scheil solidification diagrams revealed that fugitive losses of Zn and Mg during deposition increased the susceptibility to solidification cracking and promoted substrate liquation cracking. Focused electron beam (EB) conditions combined with a high aspect ratio elliptical raster pattern resulted in bands of refined, equiaxed grains. The refined microstructure suppressed solidification macrocracking and caused a nearly fivefold reduction in liquation crack density, demonstrating that beam-induced grain refinement may be a promising low-cost method for reducing hot cracking during AM.

aluminum↗

Building America Case Study: Indoor Heat Pump Water Heaters During Summer in a Hot-Dry Climate, Redding, California

Heat pump water heaters offer a significant opportunity to improve water heating performance for the over 40% of U.S. households that heat domestic hot water using electric resistance storage water heaters. Numerous field studies have also been completed documenting performance in a variety of climates and applications. More recent evaluation efforts have focused attention on the performance of May through September 2014, with ongoing winter monitoring being sponsored by California utility partners. Summer results show favorable system performance with extrapolated annual water heating savings of 1,466 to 2,300 kWh per year, based on the observed hot water loads. Additional summer space cooling benefits savings of 121 to 135 kWh per year were projected, further increasing the water heating savings by 5-9%. Given the project schedule for 2014 completion, no heating season impacts were able to be monitored. May through September 2014, with ongoing winter monitoring being sponsored by California utility partners. Summer results show favorable system performance with extrapolated annual water heating savings of 1,466 to 2,300 kWh per year, based on the observed hot water loads. Additional summer space cooling benefits savings of 121 to 135 kWh per year were projected, further increasing the water heating savings by 5-9%. Given the project schedule for 2014 completion, no heating season impacts were able to be monitored.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Window to the Hot Cell: The Challenges of Repairing a Specialized Nuclear Containment

Here, at the Idaho National Laboratory (INL) nuclear R&D site we come across a myriad of challenges and health hazards. Recently, a first time activity for the INL was to replace a hot cell window put in place circa 1977. This job evolution was complex in nature and involved several health and safety hazards. A hot cell is a containment designed to protect workers from radioactivity yet continue to allow work with remote handled tools and windows for visibility. The hot cell window weighed approximately 14,000 lbs. and was held in place by 1.6 cubic yards of high density grout. Removal of the window required abrasive grout removal techniques, radiological control efforts, specialized ventilation, and personal protective equipment utilization. In order to contain the large amounts of dust from the removal of concrete and potential contamination exposure a special containment tent and ventilation system was designed to protect workers in the surrounding areas from dust and debris. Once the window was removed it had to be further taken apart for shipment. While performing this activity, several lead sheets and lead wool was required to be removed. Overall it took 38 days to accomplish this task and had several organizations involved. There were no injuries or unexpected conditions that occurred during this job task. This was the first time this activity was performed at the INL and was completed in a successful manner. Further windows are set to be replaced in the near future.

99 GENERAL AND MISCELLANEOUS↗

3D Geophysical Inversion Modeling of Ground Magnetic Data at Baker Hot Springs, Washington State, USA

Ground-based magnetic survey data were geophysically modelled in 3D as part of a play fairway exploration program at Baker hot springs. Here, a multi-step inversion method was used to address the issue of remanent magnetization in rocks of the study area. The geophysical modelling effort generated an effective susceptibility model that displays the 3D distribution and orientation of magnetization in the subsurface. Importantly, the magnetic modelling effort found that a strong, dipolar magnetic anomaly observed in the study area can be explained by a remanently magnetized body that is ~1¼ km long x ~200 m wide and extends from ~25-400 m below the surface. Geologically, this body may represent 1) an intrusion of reversely magnetized mafic rocks or 2) a magnetite-bearing fault zone. This rock body coincides spatially with Baker hot springs; the margins of this body or the fault structures within it are likely responsible for providing the permeability that gives rise to the hot springs.

Baker hot springs↗

Remote monitoring of Alpha Gamma hot cell facility by ARG-US RFID system - 15177

Argonne National Laboratory (Argonne) has developed a monitoring and tracking system for nuclear materials based on radio frequency identification (RFID) technology. The system, called ARG-US ('Watchful Guardian'), has been in fielding testing and applications at selected U.S. Department of Energy (DOE) sites since 2010. ARG-US utilizes battery-powered tags to remotely and continuously monitor the environmental parameters, e.g., radiation levels, of the tagged items such as containers of radioactive materials. To demonstrate that the system can monitor nuclear and radiological facilities as well, a compact system was installed in the Alpha Gamma Hot Cell Facility (AGHCF) at Argonne in 2013. AGHCF is a Hazard Category 2 non-reactor nuclear facility that is being decommissioned. It is also being used to support de-inventory of other facilities on the Argonne site. As such, large quantities of radioactive materials and wastes are being discharged from the hot cell, loaded into transport containers, and shipped away. The deployed ARG-US system monitors worker areas, material transfer areas, cell exhaust HEPA filters, and?on a rover/robot?in-cell locations of AGHCF. Thus far, the system is performing as designed and yielding results that can be corroborated by existing surveillance means. The in-cell unit is particularly valuable, as it yields information that would otherwise be hard to obtain. In time, the benefits of automated monitoring 24/7 by ARG-US should become apparent and may lead to a fuller system with more distributed tags in the hot cell areas until the facility is fully decommissioned. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A reactive burn model for shock initiation in a PBX: scaling and separability based on the hot spot concept

In the formulation of a reactive burn model for shock initiation, we endeavor to incorporate a number of effects based on the underlying physical concept of hot spot ignition followed by the growth of reaction due to diverging deflagration fronts. The passage of a shock front sets the initial condition for reaction, leading to a fraction of the hot spots that completely burn while others will quench. The form of the rate model is chosen to incorporate approximations based on the physical picture. In particular, the approximations imply scaling relations that are then used to mathematically separate various contributions. That is, the model is modular and refinements can be applied separately without changing the other contributions. For example, the effect of initial temperature, porosity, etc. predominantly enter the characterization of the non-quenching hot spot distribution. A large collection of velocity gauge data is shown to be well represented by the model with a very small number of parameters.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Development of Standardized Domestic Hot Water Event Schedules for Residential Buildings

The Building America Research Benchmark is a standard house definition created as a point of reference for tracking progress toward multi-year energy savings targets. As part of its development, the National Renewable Energy Laboratory has established a set of domestic hot water events to be used in conjunction with sub-hourly analysis of advanced hot water systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Increasing the Hot‐Electron Driven Hydrogen Evolution Reaction Rate on a Metal‐Free Graphene Electrode

Abstract Recently, it has been shown that a semiconductor–insulator–graphene device can drive the hydrogen evolution reaction (HER) at the graphene surface with a reduced onset potential by injecting hot electrons into graphene. However, the catalytic properties of graphene are limited by the large hydrogen adsorption energy and lack of electrochemically active sites. To address these limitations, a n ‐silicon/insulator/plasma etched graphene device is investigated, where a dry etch process is used to increase the number of active sites on the graphene by creating a greater number of active edge sites, increasing hydrogen adsorption at a given potential. This has been shown to improve the properties of devices with cold electrons. However, here it is shown that this approach can improve the HER rate with hot electrons. The electrons injected into the graphene from the silicon shift the onset potential of HER by as high as ≈0.8 V reaching a current density of 90 mA cm −2 at an overpotential of ‐0.5 V versus RHE. Furthermore, the comparison between device with pristine graphene shows a ≈2X improvement in current density at high overpotentials. This result shows that hot‐electron devices can be improved by modifying the catalytically active sites without metal catalysts.

Chae, Hyun Uk↗

Topolgy Agnostic Hot-Spot Avoidance with InfiniBand

InfiniBand has become a very popular interconnect, due to its advanced features and open standard. Large scale InfiniBand clusters are becoming very popular, as reflected by the TOP 500 supercomputer rankings. However, even with popular topologies like constant bi-section bandwidth Fat Tree, hot-spots may occur with InfiniBand, due to inappropriate configuration of network paths, presence of other jobs in the network and un-availability of adaptive routing. In this paper, we present a hot-spot avoidance layer (HSAL) for InfiniBand, which provides hot-spot avoidance using path bandwidth estimation and multi-pathing using LMC mechanism, without taking the network topology into account. We propose an adaptive striping policy with batch based striping and sorting approach, for efficient utilization of disjoint network paths. Integration of HSAL with MPI, the de facto programming model of clusters, shows promising results with collective communication primitives and MPI applications.

97 MATHEMATICS AND COMPUTING↗

Modeling Hot Spot Experiments on Shocked Octahydro-1,3,5,7-Tetranitro-1,3,5,7-Tetrazocine

The cover picture shows a shock-induced reaction in a porous bed of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX). Our study shows compaction, reaction, and gas jetting during the initial stages of shock in the powder bed. Shock reflection at the glass window interface increases hot spot temperatures in HMX product gas in excess of 7000 K at higher impact speeds which is readily observable using pyrometry techniques. We extract a temperature histogram from simulations at discrete times, using it to calculate an effective emission spectrum and effective temperature, T eff , for comparison to data. Calculating T eff based on Planck's Law with a gray body assumption demonstrates good agreement with hot spot temperature data. The agreement with experimental results validates our mesoscale simulations as useful tools for elucidating the role of hot spot mechanisms in the shock initiation of heterogeneous explosives. Finally, more details can be found in the Full Paper by Harry Springer, Will Bassett, Sorin Bastea, Svjetlana Stekovic, and Craig Tarver on page 330 ff.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characteristics of the Hot Workability of an AZ91D Magnesium Alloy Using 3D Processing Maps

Hot compression tests were carried out on an a homogenized as-cast AZ91D magnesium alloy at temperatures ranging from 220 °C to 380 °C and strain rates ranging from 0.001 to 10 s{sup −1} by means of a Gleeble-3500 thermo mechanical simulator. True stress-–true strain curves were given. A constitutive modeling of the homogenized alloy was proposed to describe the flow characteristic. The deformation activation energy was estimated to be 142.27 kJ mol{sup −1}. Continuous three-dimensional (3D) processing maps were developed based on the true stress–true strain data as a function of strain, temperature, and strain rate. A detailed interpretation of the established 3D processing maps was conducted. The results showed that the variation of the 3D processing maps was significantly strain dependent. Dynamic recrystallization domains with high-power dissipation efficiencies and instability domains with negative instability coefficient were identified from the 3D power dissipation maps and the 3D instability maps, respectively. It was also revealed that the instability domains distinctly became enlarged with the increasing strain. Optimized temperature and strain rate ranges at various strains were determined. Furthermore, hot workability characteristics were clarified through examining the microstructures obtained under conditions falling within stability and instability domains with various strains. The results proved that the developed 3D processing maps can provide an accurate prediction of the hot deformation behavior for the homogenized AZ91D alloy.

36 MATERIALS SCIENCE↗

Identification of Rate, Extent, and Mechanisms of Hot Metal Resulfurization with CaO-SiO{sub 2}-Na{sub 2}O Slag Systems

The resulfurization of hot metal has not been comprehensively studied in literature. This study presents an experimental and mathematical modeling study of resulfurization in thermodynamic and kinetic point of view. The rate, extent, and mechanisms of resulfurization were evaluated by analyzing concurrently the physical properties and sulfur-extracting ability of the slag. Experiments were conducted in a chamber furnace in an argon atmosphere, and the hot metal was sampled with pre-defined basis. The experiments were continued until the metal–slag system reached an apparent thermodynamic equilibrium. To obtain a quantitative measure on the effect of system properties on the rate and extent of resulfurization, the results of this study were combined with previous studies handling the sulfide capacities of Na{sub 2}O-SiO{sub 2} and CaO-SiO{sub 2}-Na{sub 2}O slag systems. The sulfide capacities of the slag and corresponding metal–slag sulfur partition ratios were mathematically modeled with data-driven techniques such as multiple linear and non-linear regression and artificial neural networks. Finally, with the help of these, to study the kinetics of resulfurization, a simple mechanistic reaction model was derived. The results suggest that resulfurization of hot metal follows 1st-order kinetics and that the rate and extent can be regulated through the control of the associated thermodynamic driving force and by modifying the physical properties of the slag. The rate-limiting factor was found to be determined by the morphology of the slag phase.

36 MATERIALS SCIENCE↗