Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H- source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Laser measurement of H{sup -} ions in a field-effect-transistor based radio frequency ion source

Hydrogen negative ion density measurements are required to clarify the characteristics of negative ion production and ion source performance. Both of laser photodetachment and cavity ring down (CRD) measurements have been implemented to a field-effect-transistor based radio-frequency ion source. The density ratio of negative hydrogen ions to electrons was successfully measured by laser photodetachment and effect of magnetic filter field on negative ion density was confirmed. The calculated CRD signal showed that CRD mirrors with >99.990% reflectivity are required and loss of reflectivity due to cesium contamination should be minimized.

43 PARTICLE ACCELERATORS↗

AN ANALYSIS OF CO PRODUCTION IN COMETARY COMAE: CONTRIBUTIONS FROM GAS-PHASE PHENOMENA

Understanding the sources of CO in cometary comae is important for understanding comet chemistry and the roles comets have played in the development of the solar system. Among comets sampled to date, the CO abundances vary widely and no direct correlation of CO abundance with other known comet properties has been identified. The picture is complicated further by the discovery of CO production in the comae of some comets, most notably comets Halley and Hale-Bopp. In this study, we investigate the conditions under which CO can be produced in the coma via gas-phase phenomena. We include photochemistry of several parent molecules, as well as two-body chemical reactions that involve the parents and their photodissociative daughter and granddaughter products. We also consider the level of excitation of 'hot' hydrogen (H*) and O({sup 1}D) in the network, because the level of excitation of these reactants strongly influences reaction rates. Our results suggest that the dominant gas-phase contributor to CO formation is the photodissociation of H{sub 2}CO. Even though typical abundances of H{sub 2}CO are at {approx}1% relative to water in the coma, it produces more CO than other processes due to its relatively short photodissociation lifetime. Because other studies have shown H{sub 2}CO to have a distributed source as well, it suggests that at least some CO formation in the coma is connected to the H{sub 2}CO distributed source. We take the time to examine the CO{sub 2}/CO ratio and note that while the CO{sub 2}/CO ratio in comets Halley, Hale-Bopp, and Hyakutake are noticeably different when only native CO is considered, the CO{sub 2}/CO ratios show greater similarity when total CO is considered. Although this sample is relatively small, should the relatively similar CO{sub 2}/CO{sub Total} ratio of {approx}0.25 indeed be constant for comets with distributed CO sources, it suggests that the extended CO source of these comets is tied directly to the overall C, H, O chemistry of comets, as is likely to happen if hydrogenation of CO occurred on icy grains.

79 ASTRONOMY AND ASTROPHYSICS↗

Use of carbon monoxide and hydrogen by a bacteria-animal symbiosis from seagrass sediments

The gutless marine worm Olavius algarvensis lives in symbiosis with chemosynthetic bacteria that provide nutrition by fixing carbon dioxide (CO 2 ) into biomass using reduced sulfur compounds as energy sources. A recent metaproteomic analysis of the O. algarvensis symbiosis indicated that carbon monoxide (CO) and hydrogen (H 2 ) might also be used as energy sources. We provide direct evidence that the O. algarvensis symbiosis consumes CO and H 2 . Single cell imaging using nanoscale secondary ion mass spectrometry revealed that one of the symbionts, the γ3-symbiont, uses the energy from CO oxidation to fix CO 2 . Pore water analysis revealed considerable in-situ concentrations of CO and H 2 in the O. algarvensis environment, Mediterranean seagrass sediments. Pore water H 2 concentrations (89-2147 nM) were up to two orders of magnitude higher than in seawater, and up to 36-fold higher than previously known from shallow-water marine sediments. Pore water CO concentrations (17-51 nM) were twice as high as in the overlying seawater (no literature data from other shallow-water sediments are available for comparison). Ex-situ incubation experiments showed that dead seagrass rhizomes produced large amounts of CO. Lastly, CO production from decaying plant material could thus be a significant energy source for microbial primary production in seagrass sediments.

54 ENVIRONMENTAL SCIENCES↗

Hydrothermal catalytic conversion of oleic acid to heptadecane over Ni/ZrO 2

There is growing interest in the substitution of expensive noble metal catalysts with low-cost earth-abundant metals in applications targeting biofuels production from waste organic feedstocks. Here, nickel (Ni) catalysts supported on zirconium dioxide (ZrO 2 ), both with and without copper (Cu) as a co-metal, were tested in hydrothermal reactions of unsaturated and saturated C18 fatty acids as models for waste oil feedstocks. In contrast to recent reports, this study showed no enhancement of nickel's activity for fatty acid conversion to alkane products when Cu was present. Ni/ZrO 2 prepared by metal coprecipitation methods converted 100% of oleic acid with 25% selectivity to heptadecane after 5h of reaction at 350 °C using methanol as a hydrogen donor source, increasing to 41% heptadecane after 20 h. Lower yields were observed with catalysts prepared by wet impregnation and using alternative hydrogen donor sources (glycerol, formic acid). Greater selectivity to heptadecane was also observed at higher temperatures (370 °C) and when the initial fatty acid had greater saturation. Longer term exposure to hydrothermal media led to metal sintering and catalyst deactivation. Findings support a path forward to the development of earth-abundant metal catalysts for the upgrading of waste organic feedstocks.

09 BIOMASS FUELS↗

Ion Source Development at the SNS

The Spallation Neutron Source (SNS) now routinely operates near 1 MW of beam power on target with a highly-persistent ~38 mA peak current in the linac and an availability of ~90%. The ~1 ms-long, 60 Hz, ~50 mA H- beam pulses are extracted from a Cs-enhanced, multi-cusp, RF-driven, internal-antenna ion source. An electrostatic LEBT (Low Energy Beam Transport) focuses the 65 kV beam into the RFQ accelerator. The ion source and LEBT have normally a combined availability of ~99%. Although much progress has been made over the last years to achieve this level of availability further improvements are desirable. Failures of the internal antenna and occasionally impaired electron dump insulators require several source replacements per year. An attempt to overcome the antenna issues with an AlN external antenna source early in 2009 had to be terminated due to availability issues. This report provides a comprehensive review of the design, experimental history, status, and description of recently updated components and future plans for this ion source. The mechanical design for improved electron dump vacuum feedthroughs is also presented, which is compatible with the baseline and both external antenna ion sources.

43 PARTICLE ACCELERATORS↗

Quantifying the photoionization cross section of the hydroxyl radical

The hydroxyl free radical, OH, is one of the most significant radicals in atmospheric and interstellar chemistry, and its cation plays a role in the reactions leading to H 2 O formation. Knowledge of the photoionization efficiency of the OH radical is crucial to properly model the water photochemical cycle of atmospheres and astrophysical objects. With a gas-phase radical source based on a single H-abstraction reaction combined with a photoelectron/photoion imaging coincidence spectrometer coupled with synchrotron radiation, we recorded the OH+ photoion yield over the 12.6-15 eV energy range, and we set it to an absolute cross section scale using an absolute point measurement performed at 13.8 eV: σ$^{ion}_{OH}$ = 9.0 +/- 2.7 Mb. The resulting cross section values differ by approximately a factor 2 from the recent measurement of Dodson et al. [ J. Chem. Phys. 148, 184302 (2018)] performed with a different radical source, which is somewhat greater than the combined uncertainties of the measurements. This finding underlines the need for further investigations of this cross section.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ARE OUTFLOWS BIASING SINGLE-EPOCH C IV BLACK HOLE MASS ESTIMATES?

We use a combination of reverberation mapping data and single-epoch (SE) spectra of the C IV emission line in a sample of both low- and high-redshift active galactic nuclei to investigate sources of the discrepancies between C IV- and H{beta}-based SE black hole (BH) mass estimates. We find that for all reverberation mapped sources, there is a component of the line profile that does not reverberate, and the velocity characteristics of this component vary from object to object. The differing strength and properties of this non-variable component are responsible for much of the scatter in C IV-based BH masses compared to H{beta} masses. The C IV mass bias introduced by this non-variable component is correlated with the shape of the C IV line, allowing us to make an empirical correction to the BH mass estimates. Using this correction and accounting for other sources of scatter, such as poor data quality and data inhomogeneity, reduces the scatter between the C IV and H{beta} masses in our sample by a factor of {approx}2, to only {approx}0.2 dex. We discuss the possibility that this non-variable C IV component originates in an orientation-dependent outflow from either the proposed broad-line region disk wind or the intermediate-line region, a high-velocity inner extension of the narrow-line region.

79 ASTRONOMY AND ASTROPHYSICS↗

ALTERNATIVE AND ENHANCED CHEMICAL CLEANING: BASIC STUDIES RESULTS FY2010

In an effort to develop and optimize chemical cleaning methods for the removal of sludge heels from High Level Waste tanks, solubility tests have been conducted using nonradioactive, pure metal phases. The metal phases studied included the aluminum phase gibbsite and the iron phases hematite, maghemite, goethite, lepidocrocite, magnetite, and wustite. Many of these mineral phases have been identified in radioactive, High Level Waste sludge at the Savannah River and Hanford Sites. Acids evaluated for dissolution included oxalic, nitric, and sulfuric acids and a variety of other complexing organic acids. The results of the solubility tests indicate that mixtures of oxalic acid with either nitric or sulfuric acid are the most effective cleaning solutions for the dissolution of the primary metal phases in sludge waste. Based on the results, optimized conditions for hematite dissolution in oxalic acid were selected using nitric or sulfuric acid as a supplemental proton source. Electrochemical corrosion studies were also conducted (reported separately; Wiersma, 2010) with oxalic/mineral acid mixtures to evaluate the effects of these solutions on waste tank integrity. The following specific conclusions can be drawn from the test results: (1) Oxalic acid was shown to be superior to all of the other organic acids evaluated in promoting the dissolution of the primary sludge phases. (2) All iron phases showed similar solubility trends in oxalic acid versus pH, with hematite exhibiting the lowest solubility and the slowest dissolution. (3) Greater than 90% hematite dissolution occurred in oxalic/nitric acid mixtures within one week for two hematite sources and within three weeks for a third hematite sample with a larger average particle size. This dissolution rate appears acceptable for waste tank cleaning applications. (4) Stoichiometric dissolution of iron phases in oxalic acid (based on the oxalate concentration) and the formation of the preferred 1:1 Fe to oxalate complex is possible with the addition of a supplemental hydrogen ion source (HNO{sub 3} or H{sub 2}SO{sub 4}) and pH control. (5) Sulfuric acid is nearly twice as effective as nitric acid (on a molar basis) at promoting hematite dissolution in oxalic acid solutions, most likely due to the fact that it is diprotic. (6) The greater the oxalic acid concentration, the greater the demand for supplemental H{sup +} to promote optimal dissolution. Minimum mineral acid concentrations required for optimal oxalic acid utilization based on hematite solubility tests are provided. (7) Corrosion studies conducted (reported elsewhere) with 1 wt.% oxalic acid revealed that carbon steel corrosion rates are manageable at lower mineral acid concentrations (0.1 M HNO{sub 3} and 0.05 M H{sub 2}SO{sub 4}) and lower temperatures (45 C). (8) Proposed conditions for waste tank heel dissolution based on the solubility and corrosion test results are 0.5 wt.% oxalic acid and 0.18 M HNO{sub 3} or 0.09 M H{sub 2}SO{sub 4} at 50 C. (9) The OLI Thermodynamic Model appears to over-predict the solubility of the iron phases studied in oxalic acid and oxalic/nitric acid mixtures. The predictions show better agreement with experimental results at higher pH and in sulfuric/oxalic acid mixtures. (10) Oxalic, nitric, and sulfuric acids are effective at quickly dissolving gibbsite ({ge}86% dissolution in 2 weeks), with oxalic/sulfuric acid mixtures being particularly effective. (11) Limited dissolution tests conducted with carbon steel coupons revealed that the presence of metallic iron can, in some cases, result in dramatically different results. Additional studies in this area are recommended. Based on the current results, the optimal approach for the removal of sludge heels for HLW tanks would include the following steps: (1) removal of the maximum possible amount of heel materials by mechanical means; (2) neutralization and acidification of the heel using dilute mineral acid (This step should promote significant dissolution of certain metal hydroxides and salts, including gibbsite.); and (3) dissolution of the residual heel material at 50 C using an acid mixture containing 0.5 wt.% oxalic acid and 0.18 M nitric acid (This step should dissolve the iron phases.)

36 MATERIALS SCIENCE↗

Growth of polyphenyls via ion-molecule reactions: An experimental and theoretical mechanistic study

The reactivity of biphenylium cations C{sub 12}H{sub 9}{sup +} with benzene C{sub 6}H{sub 6} is investigated in a joint experimental and theoretical approach. Experiments are performed by using a triple quadruple mass spectrometer equipped with an atmospheric pressure chemical ion source to generate C{sub 12}H{sub 9}{sup +} via dissociative ionization of various isomers of the neutral precursor hydroxybiphenyl (C{sub 12}H{sub 10}O). C-C coupling reactions leading to hydrocarbon growth are observed. The most abundant ionic products are C{sub 18}H{sub 15}{sup +}, C{sub 18}H{sub 13}{sup +}, C{sub 17}H{sub 12}{sup +}, and C{sub 8}H{sub 7}{sup +}. The dependence of product ion yields on the kinetic energy of reagent ions, as well as further experiments performed using partial isotopic labelling of reagents, support the idea that the reaction proceeds via a long lived association product, presumably the covalently bound protonated terphenyl C{sub 18}H{sub 15}{sup +}. Its formation is found to be exothermic and barrierless and, therefore, might occur under the low pressure and temperature conditions typical of planetary atmospheres and the interstellar medium. Theoretical calculations have focussed on the channel leading to C{sub 8}H{sub 7}{sup +} plus C{sub 10}H{sub 8}, identifying, as the most probable fragments, the phenylethen-1-ylium cation and naphthalene, thus suggesting that the pathway leading to them might be of particular interest for the synthesis of polycyclic aromatic hydrocarbons. Both experiments and theory agree in finding this channel exoergic but hampered by small barriers of 2.7 and 3.7 kcal mol{sup -1} on the singlet potential energy surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emission Spectroscopy of the 4X Source Discharge With and Without N 2 Gas

This tech note summarizes the December, 1988 emission spectroscopy measurements made on the 4X source discharge with and without N₂ gas added to the H + Cs discharge. This study is motivated by the desire to understand why small amounts of N₂ gas added to the source discharge results in a reduction in the H⁻ beam noise. The beneficial effect of N₂ gas on H⁻ beam noise was first discovered by Bill Ingalls and Stu Orbesen on the ATS SAS source. For the 4X source the observed effect is that when N2 gas is added to the discharge the H⁻ beam noise is reduced about a factor of 2.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Efficient cesiation in RF driven surface plasma negative ion source

Experiments on hydrogen negative ions production in the large radio-frequency negative ion source with cesium seed are described. The system of directed cesium deposition to the plasma grid periphery was used. The small cesium seed (∼0.5 G) provides an enhanced H{sup −} production during a 2 month long experimental cycle. The gradual increase of negative ion yield during the long-term source runs was observed after cesium addition to the source. The degraded H{sup −} production was recorded after air filling to the source or after the cesium washing away from the driver and plasma chamber walls. The following source conditioning by beam shots produces the gradual recovery of H{sup −} yield to the high value. The effect of H{sup −} yield recovery after cesium coverage passivation by air fill was studied. The concept of cesium coverage replenishment and of H{sup −} yield recovery due to sputtering of cesium from the deteriorated layers is discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical Durability of Contemporary PV Encapsulants Through Artificial UV Weathering

Modern c-Si photovoltaic (PV) cells provide high performance but can be vulnerable to ultraviolet light induced degradation (UV-ID). Encapsulants, if chosen correctly, can mitigate UV-ID of the PV cell. Here, we explore performance and durability of 14 commercial encapsulant materials before, during, and after irradiation with UV-containing light. Materials include contemporary, polymer-based encapsulants with a base polymer of poly (ethylene co-vinyl acetate) (EVA), polyethylene-..alpha..-olefin (POE), or their composite (EPE). Polymers contain additives that induce UV-blocking, UV-transmitting, or UV-downshifting properties. We use test coupons to study degradation in a chamber held at 65 degrees C under a xenon light source for up to 4000 h of exposure, corresponding to a cumulative dose of 11.5 MJ/m2 at 340 nm. We examine optical properties including spectral transmittance, yellowness index and spectral fluorescence, considering changes to both the encapsulant and glass as a function of weathering time. Degradation modes identified include discoloration, changes to UV cutoff wavelength, changes to solar-weighted transmittance, and most notably a change to the UV-managing properties of some additives. We propose the use of solar-weighted transmittance in the 300- to 400-nm range to better track performance changes in the UV region associated with the UV-related additive. This is especially relevant for the emerging class of UV-downshifting additives, as metrics like UV-cutoff can understate the degree of degradation or change in these materials. While most encapsulants show very little change after weathering, some show significant changes that directly impact how much UV light would reach an underlying cell.

14 SOLAR ENERGY↗

Effect of HCO 3 - on electrochemical kinetics of carbon steel corrosion in CO 2 -saturated brines

The effect of HCO 3 – (aq) on CO 2 corrosion of carbon steel was investigated in deaerated 3.5 wt% NaCl solutions at 30 °C from pH 3.96 to 7.15. In the CO 2 -saturated solutions, the pH was adjusted with different HCO 3 – (aq) concentrations, c[HCO 3 – (aq)]. The corrosion rate decreased by a factor of 2 as the pH and c[HCO 3 – (aq)] increased. The cathodic current density during polarization increased at higher pH with higher c[HCO 3 – (aq)], indicating that HCO 3 – (aq) acted as an additional hydrogen source for the hydrogen evolution reaction. As the pH increased, the active dissolution regions displayed similar anodic Tafel slopes and suggested a modified Bockris mechanism for the Fe oxidation reaction. The exchange current densities for the half reactions were calculated to study kinetics of the anodic and cathodic half reactions independently. The anodic exchange current density ( j 0,a ) increased by one order of magnitude in the presence of CO 2 , indicating the involvement of CO 2 (aq) in the Fe oxidation reaction. As the pH and c[HCO 3 – (aq)] increased, the cathodic exchange current density ( j 0,c ) decreased by a factor of 50 because the increase in j 0,c [HCO 3 – (aq)] was not high enough to compensate the decline from the other hydrogen sources, especially j 0,c [H + (aq)]; and j 0,a decreased by a factor of 2.4 because HCO 3 – (aq) may have competed with CO 2 (aq) for the surface coverage and the increase in j 0,a [CO 2 (aq)] could not compensate the decrease in j 0,a [CO 2 (aq)]. It suggests that the reaction rate constant of HCO 3 – (aq) was smaller than CO 2 (aq) for the anodic half reaction and was smaller than H + (aq) for the cathodic half reaction. The XPS results verified that the corrosion products transitioned from iron carbonate to hydroxide as the pH increased while iron carbonate remained the major product. As the pH increased with HCO 3 – (aq), a second time constant was observed at lower frequencies of the electrochemical impedance spectroscopy (EIS) results.

36 MATERIALS SCIENCE↗

Leaf isoprene and monoterpene emission distribution across hyperdominant tree genera in the Amazon basin

Tropical forests are acknowledged to be the largest global source of isoprene (C 5 H 8 ) and monoterpenes (C 10 H 16 ) emissions, with current synthesis studies suggesting few tropical species emit isoprenoids (20-38%) and do so with highly variable emission capacities, including within the same genera. This apparent lack of a clear phylogenetic thread has created difficulties both in linking isoprenoid function with evolution and for the development of accurate biosphere-atmosphere models. In this work, we present a systematic emission study of "hyperdominant" tree species in the Amazon Basin. Across 162 individuals, distributed among 25 botanical families and 113 species, isoprenoid emissions were widespread among both early and late successional species (isoprene: 61.9% of the species; monoterpenes: 15.0%; both isoprene and monoterpenes: 9.7%). The hyperdominant species (69) across the top five most abundant genera, which make up about 50% of all individuals in the Basin, had a similar abundance of isoprenoid emitters (isoprene: 63.8%; monoterpenes: 17.4%; both 11.6%). Among the abundant genera, only Pouteria had a low frequency of isoprene emitting species (15.8% of 19 species). In contrast, Protium, Licania, Inga, and Eschweilera were rich in isoprene emitting species (83.3% of 12 species, 61.1% of 18 species, 100% of 8 species, and 100% of 12 species, respectively). Light response curves of individuals in each of the five genera showed light-dependent, photosynthesis-linked emission rates of isoprene and monoterpenes. Importantly, in every genus, we observed species with light-dependent isoprene emissions together with monoterpenes including β-ocimene. These observations support the emerging view of the evolution of isoprene synthases from β-ocimene synthases. Our results have important implications for understanding isoprenoid function-evolution relationships and the development of more accurate Earth System Models.

59 BASIC BIOLOGICAL SCIENCES↗

A buffering heat exchanger/thermal energy storage system for desalination applications

A buffering heat exchanger/thermal energy storage (BHXTES) system was designed using a fast-response phase-change material/graphite foam (PCM/GF) medium for desalination and potentially other industrial applications. Unlike a store-now-and-use-later TES system, this study focused on developing a dynamically balanced, continuously used, system that optimized three functions. A lab-scale prototype was designed and fabricated with a PureTemp 151/GF storage medium. The experimental data showed excellent thermal performance repeatability indicating minimal effects of PCM expansion and contraction on the GF as well as negligible PCM redistribution effects. The experimental data also served as a validation of the numerical model of the BHXTES system, after which optimization of the BHXTES system was conducted through numerical simulations for both PureTemp 151/GF and solar salt/GF as the storage medium. The results show that, with a Therminol 55 heat transfer fluid, continuous operation of the system can be realized with a solar energy source through cycles of 8-h changing for desalination and energy storage with the supplied heat followed by 16-h discharging for desalination with the stored energy. As a result, the working fluid outlet temperatures are generally in the ranges of approximately 128–160 °C for a PureTemp 151/GF medium and 198–220 °C for a solar salt/GF medium.

Buffering↗

Crystallization of synthetic coal-petcoke slag mixtures simulating those encountered in entrained bed slagging gasifiers

Commercial entrained bed slagging gasifiers use a carbon feedstock of coal, petcoke, or combinations of them to produce CO and H{sub 2}. These carbon sources contain mineral impurities that liquefy during gasification and flow down the gasification sidewall, interacting with the refractory linear and solidifying in the cooler zones of the gasifier. Proper slag flow is critical to good gasifier operation. A hot-stage confocal scanning laser microscope (CSLM) was used to analyze the kinetic behavior of slag crystallization for a range of synthetic coal-petcoke mixtures. On the basis of the observed precipitation during cool down studies in the 1200-1700{sup o}C temperature range, a time-temperature-transformation (TTT) diagram was created. The crystallization studies were conducted with a CO/CO{sub 2} (=1.8) corresponding to a gasification PO{sub 2} of approximately 10-8 atm at 1500{sup o}C. Ash chemistries were chosen such that they correspond to coal-petcoke feedstock mixtures with coal ash amounts of 0, 10, 30, 50, 70, and 100% (by weight), with the balance being petcoke ash. The TTT diagram exhibited two crystallization areas, one above and one below 1350{sup o}C. At the nose of the higher temperature curves, karelianite (V{sub 2}O{sub 3}) crystallization occurred and was fastest for a 30% coal-petcoke ash mixture. The second nose was located below 1350{sup o}C and had spinel-type phases that formed at 1200{sup o}C, in which preferred atomic occupation at the octahedral and tetrahedral sites varied depending upon the ash composition. At 1200{sup o}C, an Al-rich spinel formed for 100% coal slag and a Fe-rich spinel formed in petcoke-enriched slags. The addition of petcoke ash to coal ash promoted crystallization in the slag, with additional crystalline phases, such as V-rich spinel, forming at the lower temperatures. These phases were not predicted using commercially available databases. 30 refs., 18 figs.

01 COAL, LIGNITE, AND PEAT↗

Envelope equations for cylindrically symmetric space charge dominated multi species beam

We have derived differential equations for the beam envelope of a cylindrically symmetric space charge dominated multi-species beam. The major contribution here is the inclusion of the emittance growth of each species of the beam resulting from the nonlinear space charge effect of the other species which arises if the beam radius of that particular species is greater than the other species. In addition, we have also discussed the beam selection using slits and considered only the effective values of the current and emittance of each species after the slit for further transport in case the beam size of any species is larger than the slit size or the finite aperture of the beam pipe. Finally, we have studied the transport of proton from 2.45 GHz microwave ion source in the presence of H{sub 2}{sup +}, H{sub 3}{sup +} species to demonstrate the application of these results. Numerical results are presented for various values of the total beam current and different fractions of p, H{sub 2}{sup +}, and H{sub 3}{sup +} species.

43 PARTICLE ACCELERATORS↗

Novel, band-controlled metal oxide compositions for semiconductor-mediated photocatalytic splitting of water to produce H{sub 2}

Semiconductor-mediated photo-catalytic dissociation of water offers a unique opportunity for the production of H{sub 2}, a sustainable source of energy. More efficient and chemically stable photo-catalysts, however, remain a vital requirement for commercial viability of this process. The recent research in my group has focused on the synthesis of several new metal oxide (MO) photo-catalysts, such as: LaInO{sub 3}, GaFeO{sub 3}, InVO{sub 4}, In{sub 2}TiO{sub 5} and nanotubular TiO{sub 2}. These samples of controlled grain morphology have been synthesized by using different synthesis protocols and with and without coating of a noble metal co-catalyst. The doping of an impurity, either at cationic or at anionic lattice site, has helped in the tailoring of band structure and making these oxides visible-light-sensitive. Our study has revealed that the surface characteristics, grain morphology, band structure, and doping-induced lattice imperfections control the photo-physical properties and overall photo-catalytic water splitting activity of these metal/MO composites [1-6]. We have demonstrated that, besides promoting certain charge-transfer steps, metal-semiconductor interfaces influence the adsorption of water molecules and their subsequent interaction with photo-generated electron-hole pair at the catalyst surface. The role played by the above-mentioned micro-structural properties in photo-catalytic water splitting process will be discussed.

36 MATERIALS SCIENCE↗