Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRAIN ORIENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

A very promising piezoelectric property of Ta{sub 2}O{sub 5} thin films. II: Birefringence and piezoelectricity

Birefringent and piezoelectric properties of Ta{sub 2}O{sub 5} ceramic thin films of monoclinic and trigonal structures were analyzed. The birefringence, observed by reflected polarized light microscopy, yields information on thin film microstructures, crystal shapes and sizes and on crystallographic orientations of grains of trigonal structure. Such an information was considered for investigating piezoelectric properties by laser Doppler vibrometry and by piezoresponse force microscopy. The vibration velocity was measured by applying an oscillating electric field between electrodes on both sides of a Ta{sub 2}O{sub 5} film deposited on a Si substrate which was pasted on an isolating mica sheet. In this case, it is shown that the vibration velocity results were not only from a converse piezoelectric effect, proportional to the voltage, but also from the Coulomb force, proportional to the square of the voltage. A huge piezoelectric strain effect, up to 7.6%, is found in the case of Ta{sub 2}O{sub 5} of trigonal structure. From an estimation of the electrical field through the Ta{sub 2}O{sub 5} thin film, this strain likely corresponds to a very high longitudinal coefficient d{sub 33} of several thousand picometers. Results obtained by piezoresponse force microscopy show that trigonal grains exhibit a polarization at zero field, which is probably due to stress caused expansion in the transition monoclinic-trigonal, presented in a previous article (part I). - Graphical abstract: Image of cross-polarized optical microscopy showing grains of trigonal structure embedded in the monoclinic phase (on the left); (a) mounting of the sample for Laser Doppler Vibrometry, sample constituted of several layers and its equivalent electrical circuit; (b) longitudinal displacements due to converse piezoelectric and Coulomb effects and corresponding piezoelectric strain-U{sub app.}. hystereses. Highlights: > A new Ta{sub 2}O{sub 5} trigonal phase is shown to be birefringent and piezoelectric. > This phase is related to a reversible transition with a monoclinic phase. > The piezoelectricity of this trigonal phase is of several thousands of pm/V. > It is compared to piezoelectricity of the monoclinic phase of several tens of pm/V.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading

The current work aims at proposing an EBSD-based indicator for fatigue damage of a Fe-3Si steel. At the same time direct observation of dislocation structures is provided by electron channelling contrast imaging (ECCI). The investigation consisted in processing the EBSD data from patterns collected on specimen subjected to low cycle fatigue. It revealed two different regimes depending on the applied total strain variation which is explained by the identification of the dislocations structures and their evolution. At low strain variation, strain accommodation occurs by planar glide of dislocations uniformly distributed throughout the grains. No misorientation evolution is observed. At higher strain variation, the vein-channel structure is observed within the grain and the wall-channel structure in the vicinity of grain boundaries. The misorientation between these two dislocation structures is evaluated at about 0.7° which is detected by the EBSD analyses and explains the increase of the different misorientation based criteria. The EBSD study enables also the prediction of crack initiation mode. Finally, this study points out the limits of the EBSD technique as no misorientation evolution is detected at small strain variation. Indeed, the lattice distortion is too weak to be detected by conventional EBSD. - Highlights: • Microstructure investigation of the fatigue behaviour of an iron-silicon steel • Use of cECCI to investigate the fatigue dislocations structures • Characterisation of local plastic accommodation through EBSD misorientation criteria.

36 MATERIALS SCIENCE↗

Selective laser melting of Co-29Cr-6Mo alloy with laser power 180–360 W: Cellular growth, intercellular spacing and the related thermal condition

Highlights: • Increasing laser power increases the track size but not the track shape significantly. • Solidification mode and texture are similar over the range of laser power used. • Intercellular spacing is not affected by laser power but decreases slightly with growth angle. • Thermal gradient and cooling rate have been estimated to be ~ 2 × 10{sup 7} K/m and ~ 2 × 10{sup 6} K/s, respectively. - Abstract: A feature of solidification during selective laser melting (SLM) is cellular growth. Thus, how growth direction and cell size may be affected and possibly be controlled by SLM parameters are important to be understood. Furthermore, intercellular spacing (λ{sub 1}) is suggestive of the thermal condition during solidification which needs to be known for advancing the understanding of SLM. In this work, grain solidification orientation and λ{sub 1} of a Co-Cr-Mo alloy produced by SLM over a range of laser power (P = 180–360 W) with other parameters kept unchanged have been evaluated. It has been found that the overall preferred growth of cellular solidification is not significantly affected by P. This is because, over the range of P values used, the shape of track did not change sufficiently to result in a significant variation of growth direction during epitaxial growth. It has also been found that P does not affect λ{sub 1}. This suggests, since growth rate (R) relates to scan speed (v) which is unchanged, P does not significantly affect the temperature gradient of the solidification front (G). From the measured λ{sub 1} and estimated R, G and thus cooling rate ( T-dot ) can be estimated following the commonly used primary arm spacing model. The estimated G and T-dot which could not be directly measured will be compared with those predicted by simulation and the estimated T-dot will also be compared with those determined by using an emperical relationship from literature.

36 MATERIALS SCIENCE↗

Unprecedented electrical performance of friction-extruded copper-graphene composites

Copper-graphene composites show remarkable electrical performance surpassing traditional copper conductors albeit at a micron scale; there are several challenges in demonstrating similar performance at the bulk scale. In this study, we used shear extrusion to synthesize macro-scale copper-graphene composites with a simultaneously lower temperature coefficient of resistance (TCR) and improved electrical conductivity over copper-only samples. We showed that the addition of 18 ppm of graphene decreased the TCR of C11000 alloy by nearly 11%. A suite of characterization tools involving scanning and transmission electron microscopy along with atom probe tomography were used to characterize the grain size, crystallographic orientation, structure, and composition of copper grains and graphene additives in the feedstock and processed samples. We posit that the shear extrusion process may have transformed some of the feedstock graphene additives into higher defect-density agglomerates while retaining the structure of others as mono-to-trilete flakes with lower defect density. The combination of these additives with heterogeneous structures may have been responsible for the simultaneous decrease in TCR and enhanced electrical conductivity of the copper-graphene ShAPE composites.

36 MATERIALS SCIENCE↗

Efficiency improved by acid texturization for multi-crystalline silicon solar cells

In this paper, we will show that efficiency of multi-crystalline silicon (mc-Si) solar cells may be improved by acid texturization. In order to enhance overall efficiency of mc-Si for solar-cell applications, the surface treatment of texturization with wet etching using appropriate solutions can improve incident light into the cell. Alkali etchant cannot produce uniformly textured surface to generate enough open circuit voltage (V{sub OC}) and high efficiency of the mc-Si due to the unavoidable grain randomly oriented with higher steps formed during etching process. Optimized acid etching conditions can be obtained by decreasing the reflectance (R) for mc-Si substrate below levels generated by alkali etching. Short-circuit current (I{sub SC}) measurements on acid textured cells reveal that current gain can be significantly enhanced by reducing reflection. The optimal acid etching ratio HF:HNO{sub 3}:H{sub 2}O = 15:1:2.5 with etching time of 60 s and lowering 42.7% of the R value can improve 112.4% of the conversion efficiency ({eta}) of the developed solar cell. In order to obtain more detailed information of different defect region, high-resolution light beam induced current (LBIC) is applied to measure the internal quantum efficiency (IQE) and the lifetime of minority carriers. Thus, the acid texturing approach is instrumental to achieve high efficiency in mass production using relatively low-cost mc-Si as starting material with proper optimization of the fabrication steps. (author)

14 SOLAR ENERGY↗

Toward high-throughput defect density quantification: A comparison of techniques for irradiated samples

Transmission electron microscopy (TEM) is an established tool used for the investigation of defects in materials. Traditionally, diffraction contrast techniques—two-beam bright-field and weak-beam dark-field—have been used to image defects due to contrast sensitivity from weak lattice strains. Use of these methods entail an intricate tilt series of imaging using different diffracting vectors, g, to verify the g•b invisibility criterion relative to the different defect types and habit planes inherent to the material. Recently, the addition of down-zone imaging and STEM imaging has also proven to be effective imaging techniques for defect density analysis. Interest in nanocrystalline (NC) materials, spurred by their conjectured superior properties compared to their coarse-grain counterparts, has been thriving and the investigation of their defect morphologies is essential. Maneuvering within NC samples in the TEM adds another layer of difficulty making the aforementioned techniques not practical for application to specimens with complex microstructures. For this reason, we have devised a protocol for identifying NC grains optimally oriented for quantitative analysis using NanoMegas ASTAR automated crystal orientation mapping (ACOM) in the TEM. In this work, we conduct a series of experiments assessing the effectiveness of conventional two-beam bright-field, weak-beam dark-field, and down-zone STEM imaging. Here, we also evaluate an ACOM-assisted multibeam imaging method and compare defect density results obtained using each technique in an irradiated nanocrystalline Au sample.

36 MATERIALS SCIENCE↗

Unraveling the Unconventional Order of a High-Mobility Indacenodithiophene-Benzothiadiazole Copolymer

We report a new class of donor–acceptor (D-A) copolymers found to produce high charge carrier mobilities competitive with amorphous silicon (>1 cm 2 V –1 s –1 ) exhibit the puzzling microstructure of substantial local order, however lacking long-range order and crystallinity previously deemed necessary for achieving high mobility. Here, we demonstrate the application of low-dose transmission electron microscopy to image and quantify the nanoscale and mesoscale organization of an archetypal D-A copolymer across areas comparable to electronic devices (≈9 μm 2 ). The local structure is spatially resolved by mapping the backbone (001) spacing reflection, revealing nanocrystallites of aligned polymer chains throughout nearly the entire film. Analysis of the nanoscale structure of its ordered domains suggests significant short- and medium-range order and preferential grain boundary orientations. Moreover, we provide insights into the rich, interconnected mesoscale organization of this new family of D-A copolymers by analysis of the local orientational spatial autocorrelations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-Scale Scanning of Domain Network in the Ferroelectric HfO 2 Thin Film

Ferroelectric HfO 2 -based thin films have attracted much interest in the utilization of ferroelectricity at the nanoscale for next-generation electronic devices. However, the structural origin and stabilization mechanism of the ferroelectric phase are not understood because the film is typically nanocrystalline with active yet stochastic ferroelectric domains. Here, in this study, electron microscopy is used to map the in-plane domain network structures of epitaxially grown ferroelectric Y:HfO 2 films in atomic resolution. The ferroelectricity is confirmed in free-standing Y:HfO 2 films, allowing for investigating the structural origin for their ferroelectricity by 4D-STEM, high-resolution STEM, and iDPC-STEM. At the grain boundaries of <111>-oriented Pca2 1 orthorhombic grains, a high-symmetry mixed-(R3m, Pnm2 1 ) phase is induced, exhibiting enhanced polarization due to in-plane compressive strain. Nanoscale Pca2 1 orthorhombic grains and their grain boundaries with mixed-(R3m, Pnm2 1 ) phases of higher symmetry cooperatively determine the ferroelectricity of the Y:HfO 2 film. It is also found that such ferroelectric domain networks emerge when the film thickness is beyond a finite value. Furthermore, in-plane mapping of oxygen positions overlaid on ferroelectric domains discloses that polarization is suppressed at vertical domain walls, while it is active when domains are aligned horizontally with subangstrom domain walls. In addition, randomly distributed 180° charged domain walls are confined by spacer layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Behavior and Ionic Conductivity of Concentrated Solutions of Polystyrene-Poly(ethylene oxide) Diblock Copolymers in an Ionic Liquid

Concentrated solutions of poly(styrene-b-ethylene oxide) (PS-PEO) diblock copolymers were prepared using the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMI][TFSI] as the solvent. The self-assembled microstructures adopted by the copolymer solutions have been characterized using small-angle X-ray scattering. Lyotropic mesophase transitions were observed, with a progression from hexagonally packed cylinders of PEO, to lamellae, to hexagonally packed cylinders of PS upon increasing [EMI][TFSI] content. The change in lamellar domain spacing with ionic liquid concentration was found to be comparable to that reported for other block copolymers in strongly selective solvents. The ionic conductivity of the concentrated PS-PEO/[EMI][TFSI] solutions was measured via impedance spectroscopy, and ranged from 1 x 10{sup -7} to 1 x 10{sup -3} S/cm at temperatures from 25-100 C. Additionally, the ionic conductivity of the solutions was found to increase with both ionic liquid concentration and molecular weight of the PEO blocks. The ionic conductivity of PEO homopolymer/[EMI][TFSI] solutions was also measured in order to compare the conductivity of the PS-PEO solutions to the expected limit for a lamellar sample with randomly oriented microstructure grains.

36 MATERIALS SCIENCE↗

Structural and Morphological Evolution of Lead Dendrites during Electrochemical Migration

The electrochemical deposition and dissolution of lead on gold electrodes immersed in an aqueous solution of lead nitrate were studied in situ using a biasing liquid cell by transmission electron microscopy (TEM). We investigate in real time the growth mechanisms of lead dendrites as deposited on the electrodes under an applied potential. TEM images reveal that lead dendrites are developed by the fast protrusion of lead branches in the electrolyte and tip splitting. And, the fast growing tip of the dendritic branch is composed of polycrystalline nanograins and it develops into a single crystalline branch eventually. This study demonstrated unique electrochemical growth of single crystal dendrites through nucleation, aggregation, alignment and attachment of randomly oriented small grains. Additionally, we found the lead concentration in the electrolyte drastically influences the morphology of dendritic formation.

25 ENERGY STORAGE↗

Twin-mediated crystal growth: an enigma resolved

During crystal growth, faceted interfaces may be perturbed by defects, leading to a rich variety of polycrystalline growth forms. One such defect is the coherent Σ3 {111} twin boundary, which is widely known to catalyze crystal growth. These defects have a profound effect on the properties of many materials: for example, electron-hole recombination rates strongly depend on the character of the twin boundaries in polycrystalline Si photovoltaic cells. However, the morphology of the twinned interface during growth has long been a mystery due to the lack of four-dimensional (i.e., space and time resolved) experiments. Many controversial mechanisms have been proposed for this process, most of which lack experimental verification. Here, we probe the real-time interfacial dynamics of polycrystalline Si particles growing from an Al-Si-Cu liquid via synchrotron-based X-ray tomography. Our novel analysis of the time evolution of the interfacial normals allows us to quantify unambiguously the habit plane and grain boundary orientations during growth. This, when combined with direct measurements of the interfacial morphology provide the first confirmation of twin-mediated growth, proposed over 50 years ago. Using the insights provided by these experiments, we have developed a unified picture of the phenomena responsible for the dynamics of faceted Si growth.

Science & Technology - Other Topics↗

Raman and dielectric study of Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3}-MgAl{sub 2}O{sub 4} tunable microwave composite

(1-x)Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3}-xMgAl{sub 2}O{sub 4} (x=0.00, 0.05, 0.10, 0.20, and 0.30) composite ceramics have been synthesized by the solid-state reaction, and its structural and dielectric properties have been systematically characterized. Two crystalline phases, a cubic perovskite structure Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3} (BST) and a face-centered-cubic spinel structure MgAl{sub 2}O{sub 4} (MA), are clearly visible for x{>=}0.05. As the MA content increases, the composite ceramics show an increased degree of deviation from the Curie-Weiss law and an increased diffuseness of the dielectric peak. Meanwhile, the tunability of composite ceramics increases. Raman analysis clearly indicates that the incorporation of MA lowers the permittivity and degrades the quality factor of BST composites, which is ascribed to the deterioration on B-site ordering of ABO{sub 3} perovskite structure.

36 MATERIALS SCIENCE↗

Characterization of the local crystallinity via reflectance of very slow electrons

The reflectance of very slow electrons from solids and its electron energy dependence are shown as characteristic for the crystal system and its spatial orientation so they can serve, e.g., to fingerprinting the orientation of grains in polycrystals. Measurements on single crystals and polycrystals are validated via electron backscatter diffraction analyses. Sensitivity of the method to fine details of crystallinity is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of cellular microstructure and enhanced coercivity in sputtered Sm{sub 2}(CoCuFeZr){sub 17} film

We have investigated the effect of annealing temperature on the microstructure and magnetic properties of Sm{sub 2}(CoCuFeZr){sub 17} films prepared using ion beam sputtering at room temperature. The as-deposited film shows randomly oriented polycrystalline grains and exhibits small coercivity (H{sub C}) of 0.04 T at room temperature. Post annealing of these films at 700 °C under Ar atmosphere shows significant changes in the microstructure transforming it to the development of cellular growth, concomitant with enhanced coercivity up to 1.3 T. The enhanced coercivity is explained using the domain wall pinning mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Aligned Crystallite Powder of NdFeAsO 0.86 F 0.14 : Magnetic Hysteresis and Penetration Depth

We report the basal-plane superfluid density and critical current of magnetically aligned NdFeAsO 0.86 F 0.14 powder. This sample has individual crystallite grains permanently oriented with their c axis along the external field. The small particles provide a sensitive indicator of dc flux penetration, and allow analysis of the temperature dependence that suggests two-gap characteristics. A quantitative determination of the absolute magnitude is hindered by the need for accurate knowledge of the particle size distribution. Magnetic irreversibilities at high field suggest strong flux pinning of basal-plane critical currents, with monotonic field dependence and no evidence of the fishtail effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth direction and morphology of ZnO nanobelts revealed by combining in situ atomic force microscopy and polarized Raman spectroscopy

Control over the morphology and structure of nanostructures is essential for their technological applications, since their physical properties depend significantly on their dimensions, crystallographic structure, and growth direction. A combination of polarized Raman (PR) spectroscopy and atomic force microscopy (AFM) is used to characterize the growth direction, the presence of point defects and the morphology of individual ZnO nanobelts. PR-AFM data reveal two growth modes during the synthesis of ZnO nanobelts by physical vapor deposition. In the thermodynamics-controlled growth mode, nanobelts grow along a direction close to [0001], their morphology is growth-direction dependent, and they exhibit no point defects. In the kinetics-controlled growth mode, nanobelts grow along directions almost perpendicular to [0001], and they exhibit point defects.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Mn content on the deformation behavior of Fe-Mn-Al-C TWIP steels — A computational study

This paper presents a double-slip/double-twin polycrystal plasticity model using finite element solution to investigate the kinetics of deformation twinning of low-to-medium manganese (Mn) twinning-induced plasticity (TWIP) steels. Empirical equations are employed to estimate the stacking fault energy (SFE) of TWIP steels and the critical resolved shear stress (CRSS) for dislocation slip and deformation twinning, respectively. The results suggest that the evolution of twinning in Fe-xMn-1.4Al-0.6C (x=11.5, 13.5, 15.5, 17.5 and 19.5) TWIP steels, and its relation to the Mn content, can explain the effect of Mn on mechanical properties.the stress-strain. By comparing the double-slip/double-twin model to a double-slip model, the predicted results essentially reveal that the interaction behavior between dislocation slip and deformation twinning can lead to an additional work hardening. Also, numerical simulations are carried out to study the influence of boundary conditions on deformation behavior and twin formation. The nucleation and growth of twinning are found to depend on internal properties (e.g., mismatch orientation of grains and stress redistribution) as well as on external constraints (e.g., the applied boundary conditions) of the material.

Wang, Yuan↗