Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GAIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Spectral Filtering Induced by Non-Hermitian Evolution with Balanced Gain and Loss: Enhancing Quantum Chaos

Here, the dynamical signatures of quantum chaos in an isolated system are captured by the spectral form factor, which exhibits as a function of time a dip, a ramp, and a plateau, with the ramp being governed by the correlations in the level spacing distribution. While decoherence generally suppresses these dynamical signatures, the nonlinear non-Hermitian evolution with balanced gain and loss (BGL) in an energy-dephasing scenario can enhance manifestations of quantum chaos. In the Sachdev-Ye-Kitaev model and random matrix Hamiltonians, BGL increases the span of the ramp, lowering the dip as well as the value of the plateau, providing an experimentally realizable physical mechanism for spectral filtering. The chaos enhancement due to BGL is optimal over a family of filter functions that can be engineered with fluctuating Hamiltonians.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Achievement of Target Gain Larger than Unity in an Inertial Fusion Experiment

On December 5, 2022, an indirect drive fusion implosion on the National Ignition Facility (NIF) achieved a target gain G target of 1.5. This is the first laboratory demonstration of exceeding “scientific breakeven” (or G target > 1 ) where 2.05 MJ of 351 nm laser light produced 3.1 MJ of total fusion yield, a result which significantly exceeds the Lawson criterion for fusion ignition as reported in a previous NIF implosion [H. Abu-Shawareb (Indirect Drive ICF Collaboration), ]. This achievement is the culmination of more than five decades of research and gives proof that laboratory fusion, based on fundamental physics principles, is possible. This Letter reports on the target, laser, design, and experimental advancements that led to this result. Published by the American Physical Society 2024

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gain scaling for multirate filter banks

Eliminating two trivial degrees of freedom corresponding to the lowpass DC response and the highpass Nyquist response in a two-channel multirate filter bank seems simple enough. Nonetheless, the ISO/IEC JPEG 2000 image coding standard manages to make this mundane task look totally mysterious. We reveal the true meaning behind JPEG 2000's arcane specifications for filter bank normalization and point out how the seemingly trivial matter of gain scaling leads to highly nontrivial issues concerning uniqueness of lifting factorizations.

42 ENGINEERING↗

Nonideal Effects Limit the Efficiency Gain for Angle-Restricted Solar Cells

We report that performance of a conventional solar cell at 1 sun is limited to ~31%, defined by the Shockley–Queisser (SQ) limit. The thermodynamic limit can be improved to ~41% by reducing the angle mismatch between incident light and emitted rays. This can be achieved either by increasing the range of incident angles (as in a concentrator cell; CPV) or by reducing the emission angle from the device (angle-restricted photovoltaics; APVs). The equivalence is exact in the radiative limit. However, the gains of angle-restricted cells may erode rapidly once nonradiative recombination and other optical losses are accounted for, suggesting the need for quantitative/careful design. Here, we report a detailed self-consistent absorption-emission-transport study to 1) define the limiting efficiency of APV scheme and 2) explain the efficiency loss due to practical constraints, such as Shockley–Read–Hall (SRH) and Auger recombination, and mirror reflectivity. Our analysis reflects a growing consensus in the field that any imperfection of the mirror quickly diminishes the advantages of angle restriction. Finally, we conclude that a 50-nm angle-restricted cell with moderate material quality, but with nearly perfect mirror and Lambertian trapping, may be ~36–37% efficient.

14 SOLAR ENERGY↗

Thermal Stability of the Dot-in-Well Gain Medium for Photonic Crystal Surface Emitting Lasers

Self-assembled quantum dots (QDs) embedded in InGaAs quantum wells (QWs) are used as active regions for photonic-crystal surface-emitting lasers (PCSELs). An epitaxial regrowth method is developed to fabricate the dot-in-well (DWELL) PCSELs. Here, the epitaxial regrowth starts with the growth of a partial laser structure containing bottom cladding, waveguide, active region, and the photonic crystal (PC) layer. The PC layer is patterned to realize the cavity. Subsequently a top cladding layer is regrown to complete the laser structure. During the regrowth of the top cladding layer, the partial laser structure is subjected to high growth temperatures in excess of 600 °C resulting in an unintentional annealing of the active region. This annealing of the active region can alter the QDs by changing their size resulting in a blue shift in photoluminescence (PL) and narrowing PL emission. This effect results in the misaligning of the gain peak and the cavity resonance, resulting in sub-optimal lasing performance. DWELL active regions are known to have better thermal stability compared to both QDs and QWs and could be an ideal candidate for regrown PCSELs. We successfully demonstrate an optically-pumped epitaxially-regrown DWELL PCSEL with an emission wavelength of 1230 nm operating at room temperature. Furthermore, the DWELL active region shows excellent emission wavelength stability and intensity despite the high temperature regrowth process.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A depth-of-interaction PET detector using mutual gain-equalized silicon photomultiplier

We developed a prototype high resolution, high efficiency depth-encoding detector for PET applications based on dual-ended readout of LYSO array with two silicon photomultipliers (SiPMs). Flood images, energy resolution, and depth-of-interaction (DOI) resolution were measured for a LYSO array - 0.7 mm in crystal pitch and 10 mm in thickness - with four unpolished parallel sides. Flood images were obtained such that individual crystal element in the array is resolved. The energy resolution of the entire array was measured to be 33%, while individual crystal pixel elements utilizing the signal from both sides ranged from 23.3% to 27%. By applying a mutual-gain equalization method, a DOI resolution of 2 mm for the crystal array was obtained in the experiments while simulations indicate {approx}1 mm DOI resolution could possibly be achieved. The experimental DOI resolution can be further improved by obtaining revised detector supporting electronics with better energy resolutions. This study provides a detailed detector calibration and DOI response characterization of the dual-ended readout SiPM-based PET detectors, which will be important in the design and calibration of a PET scanner in the future.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Analysis of the Impact of Installation Parameters and System Size on Bifacial Gain and Energy Yield of PV Systems

In this work, we present the combined effect of installation parameters (tilt angle, height above ground, and albedo) on the bifacial gain and energy yield of three photovoltaic (PV) system configurations: a single module, a row of five modules, and five rows of five modules utilizing RADIANCE based ray tracing model. We show that optimum tilt angle is dependent on parameters such as height, albedo, size of the system, and time of the year. For a single bifacial module installed in Albuquerque, NM, the optimum tilt angle is lowest (~5 degree) for summer solstice and highest (~65 degree) for winter solstice. For larger systems, optimum tilt angle can be up to 200 more than that for a single module system. We also show that modules in large scale systems, generate lower energy due to large shadowing areas cast by the modules on the ground. For albedo of 21 %, middle module in a large array generates up to 7% less energy than a single bifacial module. To validate our model, we utilize measured data from Sandia's fixed tilt bifacial PV testbed and compare it with our simulations. We find that due to higher non-uniformity, lower tilt angles demonstrate high normalized root mean square deviation (NRMSD) between measured and simulated values than high tilt angles.

14 SOLAR ENERGY↗

Novel Quadratic High Gain Boost Converter With Adaptive Soft-Switching Scheme and Reduced Conduction Loss

In this article, an improved soft-switching quadratic boost converter is proposed. Instead of inserting an additional active clamp or auxiliary zero-voltage transition circuit at the switching node, the proposed topology connects the high-voltage switching node to the input diode node by replacing one of the input diodes with a low-rated switch. The proposed topology can attain soft-switching condition for all the switches and input diode turns- off under zero-current switching (ZCS). The operation of input-side switch not only aids zero-voltage switching (ZVS) turn- on for the main switch but also helps in reducing the conduction loss. Also, the input-side switch operates under ZCS turn- on and ZVS turn- off , making it a loss economical solution. An adaptive timing scheme for driving the input switch is proposed, which can ensure soft-switching condition under varying gain and load range. The detailed operational modes, analysis, and design considerations of the proposed topology are presented. A 250 W hardware prototype is built to validate the performance of the proposed converter operating at 100 kHz switching frequency. Results with adaptive soft-switching scheme shows that the converter is modulated to achieve its best efficiency condition under various system conditions. Furthermore, a peak efficiency of 96.1% at 155 W and efficiencies above 95.75% over a wide load range are achieved using all Si devices.

14 SOLAR ENERGY↗

Versatile High-Gain Low-Noise Readout ASIC for Silicon Microstrip Tracking Detectors

This work presents Turpial, a custom-designed low- power front-end readout ASIC for microstrip silicon sensors. Implemented in 130 nm CMOS technology, the chip integrates 64 identical readout channels, each including a configurable charge-sensitive amplifier, a bipolar pulse shaper, a 32-sample 50 Msps analog memory, and a 12-bit RC-hybrid SAR ADC operating at 1 Msps. To satisfy the target power budget of 5 mW per channel, the architecture employs a time-decoupled readout scheme in which fast transient signals are first captured in the analog memory and subsequently digitized at a lower rate. Turpial supports a wide dynamic range from 1 kℎ+ to 1 Mℎ+ while maintaining low noise performance, targeting an equivalent noise charge (ENC) below 200 𝑒−including the sensor, and providing a maximum gain of 1500 mV/fC. A digital block manages slow control, data acquisition, and data serialization through dual CML 300 Mb/s serializers. In addition, an on-chip reference circuit, based on a sub-1 V bandgap reference and an integrated LDO regulator, eliminates the need for external reference circuitry. Experimental results demonstrate that both the individual building blocks and the fully integrated ASIC meet the design specifications.

Hernandez, Hugo [Stanford University] (ORCID:00000↗

From Depletion to Restoration: Lessons From Long‐Term Monitoring of Carbon Gains and Losses in Cropping Systems

As global atmospheric CO 2 rapidly approaches a key tipping point, there is an urgent need to implement strategies to reverse this pattern. A generally accepted understanding of carbon (C) in agricultural fields includes: (H1) substantial C loss occurs when natural vegetation is converted to crops, (H2) soils typically reach a steady-state C concentration under contemporary practices, and (H3) improved management or crop selection can enhance soil C stocks over time. Significant variability exists, but studies consistently show large C losses from agricultural ecosystems, supporting H1. Although steady-state C levels (H2) are commonly assumed, measuring C gains or losses in mature agroecosystems is challenging. Efforts to increase soil C storage (H3) have limited data due to the diversity of potential practices, compounded by substantial variability in soil C measurements. Here, long-term (7–17 year) ecosystem C flux data from diverse cropping systems revealed that conventionally tilled annual row crops (maize and soybean) act as significant long-term atmospheric C sources, challenging H2. Furthermore, conservation tillage practices reduced C losses compared with conventional tillage but showed minimal evidence for long-term ecosystem C storage, even after 20+ years. This indicates that no-till practices reduce C losses but imply that no soil C is added, challenging H3. By contrast, perennial Miscanthus × giganteus, Panicum virgatum, and restored tallgrass prairie systems store C at the ecosystem scale more effectively than minimally tilled annual row crops. Analysis over multiple years demonstrates significant ecosystem C storage with perennial crops, varying by species, starting in the first year of transition. These findings, although focused on one region, suggest that the assumptions of steady-state C levels and increased storage from conservation practices do not universally apply and that significant changes to agroecosystems are required to increase C storage.

59 BASIC BIOLOGICAL SCIENCES↗

Accumulated distribution of material gain at dislocation crystal growth

A model for slowing down the tangential growth rate of an elementary step at dislocation crystal growth is proposed based on the exponential law of impurity particle distribution over adsorption energy. It is established that the statistical distribution of material gain on structurally equivalent faces obeys the Erlang law. The Erlang distribution is proposed to be used to calculate the occurrence rates of morphological combinatorial types of polyhedra, presenting real simple crystallographic forms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Capacity Gain in Li-Ion Cells with Silicon-Containing Electrodes

Silicon-containing lithium-ion batteries can exhibit capacity gain early in life, which makes forecasting future cell behavior difficult. We have observed these anomalous trends even in conditions where known mechanisms, such as overhang equalization and excessive electrolyte oxidation, are unlikely to be significant. Here, we combine simulations and experiments to analyze four cases that can produce increased capacity in Si cells. Three of these pathways relate to “break-in” processes, where improved mass and charge transport can lead to increased access to active electrode domains and decreased cell impedance. The fourth case occurs at high levels of prelithiation, when the positive electrode (PE) is completely replenished with Li + at the end of cell discharge. We show that the commonality among these mechanisms is that the underlying transformations change the potentials experienced by electrodes at the end of half-cycles, increasing the Li + inventory available to the cell. A quantitative framework to describe these effects is presented, enabling these ideas to be extended to other battery systems.

25 ENERGY STORAGE↗

Injection Locking Dynamics of Oscillation Loop with Saturable Gain

We analytically derive and experimentally verified the injection-locking range and phase-noise suppression ratio of an oscillation loop with saturable gain, establishing a general and straightforward approach for analyzing injection locking dynamics.

Xi, Zichen [ORNL]↗

Lasing threshold control in two-dimensional photonic crystals with gain

We demonstrate how the lasing threshold of a two dimensional photonic crystal containing a four-level gain medium is modified, as a result of the interplay between the group velocity and the modal reflectivity at the interface between the cavity and the exterior. Depending on their relative strength and the optical density of states, we show how the lasing threshold may be dramatically altered inside a band or, most importantly, close to the band edge. The idea is realized via self-consistent calculations based on a finite-difference time-domain method. The simulations are in good agreement with theoretical predictions.

36 MATERIALS SCIENCE↗

Raman gain control in optical fibers with orbital-angular-momentum-induced chirality of light

Stimulated Raman scattering is a particularly robust nonlinearity, occurring in virtually every material because its spectral linewidth and associated frequency shift do not typically depend on phases or directions (i.e. wavevectors) of the interacting light beams. In amorphous materials such as glass fibers, Raman bandwidths are large, enabling its use as a broadband gain element. This ubiquity makes it a versatile means for achieving optical amplification or realizing lasers over a large range of pulsewidths at user-defined colors. However, this ease of deploying the effect also presents itself as a stubborn source of noise in fiber-based quantum sources or parasitic emission in fiber lasers. Here, we show that orbital angular momentum carrying light beams experiencing spin-orbit interactions yield novel phase-matching criteria for Raman scattering. This enables tailoring its spectral shape (by over half the Raman shift in a given material) as well as strength (by ∼ 100×) simply by controlling light’s topological charge – a capability of utility across the multitude of applications where modulating Raman scattering is desired.

Liu, Xiao (ORCID:000000032239762X)↗

Interplay between gain and loss in arrays of nonlinear plasmonic nanoparticles: toward parametric downconversion and amplification

With the help of a theoretical model and finite-difference time-domain (FDTD) simulations based on the hydrodynamic–Maxwell model, we examine the effect of difference-frequency generation (DFG) in an array of L-shaped metal nanoparticles (MNPs) characterized by intrinsic plasmonic nonlinearity. The outcomes of the calculations reveal the spectral interplay between gain and loss in the vicinity of the fundamental frequency of the localized surface plasmon resonances. Subsequently, we identify different array thicknesses and pumping regimes facilitating parametric amplification and spontaneous parametric downconversion. Our results suggest that the parametric amplification regime becomes feasible on a scale of hundreds of nanometers and spontaneous parametric downconversion on the scale of tens of nanometers, opening up new exciting opportunities for developing building blocks of photonic metasurfaces.

Shah, Syed A.↗

Hot-pressed ceramic Fe:ZnSe gain-switched laser

We report the first room temperature gain-switched Fe:ZnSe hot-pressed ceramic laser pumped by 2.94 µm radiation of mechanically Q-switched Er:YAG laser. The maximum output energy at 4.2 µm was 41 mJ at 3 Hz repetition rate and 120 ns pulse duration. The measured slope efficiency was 25% with respect to the absorbed energy. This technique could be attractive for the future development of high-energy short-pulse solid-state mid-IR systems.

36 MATERIALS SCIENCE↗

Optical, electrical, and EPR studies of polycrystalline Al:Cr:ZnSe gain elements

Transition metal-doped II-VI (TM:II-VI) chalcogenides are well-known laser materials for optically pumped middle-infrared lasers. Cr:ZnSe is a key representative of this class of transition metal doped II-VI gain media and is arguably considered the material of choice for optically pumped middle-infrared lasers. In addition to effective mid-IR lasing under optical excitation, these crystals, being wide-band semiconductors, hold the potential for direct electrical excitation. One way to form n-type conductivity in ZnSe crystals is by annealing them in a melt of Zn-Al alloy. However, this annealing of Cr:ZnSe crystals results in their purification and transfer of chromium to the melt of Zn-Al alloy. In this article, we report on optimizing the doping technique for providing n-type conductivity in Al:Cr:ZnSe crystals while preserving the chromium concentration. Al:Cr:ZnSe samples with resistivities ranging from 10.8 to 992 Ω-cm were fabricated. While the 2 + valence state of Cr is typically dominant in Cr:ZnSe, both Cr 2+ and Cr + were detected in Al:Cr:ZnSe samples. The maximum level of Cr + concentration was measured to be 4 × 10 18 cm -3 .

36 MATERIALS SCIENCE↗