Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUID DYNAMIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Coarse grained computational fluid dynamic simulation of sands and biomass fluidization with a hybrid drag

We report the bubbling fluidized bed reactor is widely used in fast pyrolysis of biomass. Discrete simulation of this reactor is challenging due to many sand particles and lack of accurate drag corrections accounting for the interaction of two different solid particles with different properties. In this research, the computational cost is reduced by using the coarse-grained computational fluid dynamic-discrete element method, where many sand particles are lumped into a larger numerical parcel. The Syamlal–O'Brien drag model is used for sand, while Ganser correction coupled with Gidaspow model is used for the nonspherical biomass particles. This hybrid approach shows superior behavior over other drag models using pressure drops as a benchmark. The predicted bed height and pressure fluctuating frequencies compare well with experiment. Finally, the mixing of biomass is close to perfect if the superficial velocity is larger than four times the minimum fluidization velocity.

09 BIOMASS FUELS↗

A note on the hard-sphere fluid dynamic universality class

In a recent letter Ramirez-Gonzalez et al. propose the existence of a dynamic universality class associated with generic soft-sphere systems whose static and dynamic properties can be mapped onto those of the hard-sphere fluid using a state and interaction dependent effective hard-sphere diameter, and thus are functions of a single variable, namely the effective packing fraction. The concept is useful for understanding the dynamics of systems from atomic fluids to colloidal suspensions. It is worth noting however that these ideas have a fairly long history, that there may be better criteria than the one adopted by the authors for establishing a connection between the system of interest and the dynamically equivalent hard-sphere one, and that there are also some known limitations.

Bastea, Sorin↗

Adaptive finite difference methods in fluid dynamics

An adaptive method to solve partial differential equations in fluid mechanics is presented. The approach requires internal boundary conditions that must be conservative, data structures for keeping track of several layers of fine grid patches, error estimation, and heuristics for automatic grid generation. In practical calculations gains in computer efficiency up to 10 over nonadaptive methods are observed. The whole procedure takes 3000 lines of FORTRAN code.

Berger, Marsha J.↗

Computational fluid dynamic modelling of cavitation

Models in sheet cavitation in cryogenic fluids are developed for use in Euler and Navier-Stokes codes. The models are based upon earlier potential-flow models but enable the cavity inception point, length, and shape to be determined as part of the computation. In the present paper, numerical solutions are compared with experimental measurements for both pressure distribution and cavity length. Comparisons between models are also presented. The CFD model provides a relatively simple modification to an existing code to enable cavitation performance predictions to be included. The analysis also has the added ability of incorporating thermodynamic effects of cryogenic fluids into the analysis. Extensions of the current two-dimensional steady state analysis to three-dimensions and/or time-dependent flows are, in principle, straightforward although geometrical issues become more complicated. Linearized models, however offer promise of providing effective cavitation modeling in three-dimensions. This analysis presents good potential for improved understanding of many phenomena associated with cavity flows.

Deshpande, Manish↗

Optimized fluid dynamics for heavy ion collisions

The (viscous) anisotropic hydrodynamic approach, especially after perturbative inclusion of all residual viscous terms, has been shown to dramatically outperform viscous hydrodynamics in several simplified situations for which exact solutions exist but which share with realistic expansion scenarios the problem of large dissipative currents. Here we will report on the present status of applying viscous anisotropic hydrodynamics in a highly efficient simulation of the full three-dimensional quark-gluon plasma. Results from accelerated 3+1-dimensional viscous hydrodynamic simulations using graphics processing units will be compared to the anisotropic frameworks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multiphysics Computational Fluid Dynamics for Design and Scale-Up of CO 2 /Syngas Bioreactors [Poster]

What are we trying to do? Develop validated, high fidelity computational models for gas fermentation using CO 2 , CO and H 2 . How is it done today? Microbiological advances are made at the lab scale in well mixed reactors. Process scale-up remains an open question when considering novel microorganisms/reaction systems. Why is this important? Lab-to-production scale transition is required to achieve CO 2 conversion at Mton/Gton scale and computational models can de-risk/accelerate this transition.

09 BIOMASS FUELS↗

Thermodynamic and fluid-dynamic concepts

Some of the fundamental concepts of thermodynamics and compressible fluid mechanics are reviewed. The concepts treated are those that are considered necessary to analyze the flow and energy transfer processes occurring in a turbine.

Glassman, A. J.↗

Incorporating Oxygen Uncoupling Kinetics into Computational Fluid Dynamic Simulations of a Chemical Looping System

Chemical looping with oxygen uncoupling (CLOU) is a carbon-capture technology that utilizes a metal oxide as an oxygen carrier to separate oxygen from air and releases gaseous O 2 into a reactor where fuel is fed. Earlier experimental and simulated work has been performed on systems less than 1 MW. Previous work has been limited to one-dimensional kinetic simulations. Literature kinetics were modified to work in a Barracuda-VR simulation package. A simplified spreadsheet model was used to verify the Barracuda-VR simulation adaption of the kinetics to previously published results. The simulated kinetics, literature models, and raw data matched well. The adapted kinetics were then incorporated into a 10 kW dual bubbling bed CLOU system three-dimensional simulation. The simulations predicted carbon capture efficiency similar to that reported previously for similar systems. The solid circulation rate, temperature profile, and gas concentration profiles followed the expected trends. The overall three-dimensional simulation of kinetics showed reasonable results for what has been previously reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interpretation of waverider performance data using computational fluid dynamics

A computational study was conducted to better understand experimental results obtained from wind-tunnel tests of a Mach 4 conical-flow-derived waverider and a comparative reference configuration, which showed that the aerodynamic performance of the reference configuration was slightly better than that of the waverider. The computational results showed that the predicted surface pressure values and the integrated lift and drag coefficients were much lower for the reference model because the reference model bottom is an expansion surface. However, the lift-drag ratios for the reference model were higher due to a relatively low drag for a comparable amount of lift. The results also showed that the reference model exhibited the same shock attachment characteristics as the conical-flow-derived waverider, and is therefore also a waverider. The shock attachment characteristic gives the waverider a performance advantage over conventional hypersonic vehicles, and the results suggest that altering the bottom surface does not cause significant performance degradation. Flowfield solutions also show that the conical-flow waverider model has better propulsion/airframe integration characteristics than the reference configuration. The results also suggest that generating flowfields other than conical ones may be used to design waveriders with improved aerodynamic performance.

COMPUTATIONAL FLUID DYNAMICS↗

ECAR-6330 Rev 0 Computational Fluid Dynamics Evaluation of Core Pressure Drop for the Primary Coolant Apparatus Test

PCAT is a thermal-hydraulic test loop for MARVEL reactor. The design gap thickness between the heater rods of PCAT core is 1.0 mm. The heater elements were manufactured within a straightness tolerance for the designed gap thickness, but several elements have been distorted out of tolerance during the welding process. The distortion of heater rods could lead to flow maldistribution and excessive hotspot temperature when the gap between two heater rods is too narrow. Wire-wraps are the spacer devices widely used in the sodium cooled fast reactor system to maintain the design fuel pitch. Generally, a wire spacer can enhance the turbulent heat transfer, but it increases the pressure drop, which is not desirable for a natural-circulation system like PCAT. Therefore, three short wire-wrap spacers per heater have been proposed to contain the core pressure drops and keep the heater-to-heater gap in an acceptable range. The objectives of this ECAR is to evaluate the PCAR core pressure drop with short wire spacers to confirm that the additional pressure drop due to the wire spacer will not disturb the natural circulation of the PCAT.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

The influence of particle size on the fluid dynamics of a laser-induced plasma

The interaction of a laser-induced shock wave with nanoparticles and microparticles of aluminum oxide is investigated through experiments and modeling. The chemistry and physics of the interaction between the particles and plasma generated from laser ablation shows similarities and discrete differences for the two particle sizes. For both particle sizes, early stage (< 10 μs) ionization was dominant and evidenced by higher concentrations of Al II. While both sizes exhibit ionization over the same duration, the intensity of emission was greater for nanoparticles indicating greater concentrations of ionized species. Moreover, the dispersion of species was notably more elongated for microparticles while radial dispersion was more pronounced for nanoparticles with elevated drag forces. At later stages (i.e., > 10 μs), oxidation reactions were dominant for both particle sizes, but the same distinctions in flow field were observed and attributed to particle drag. In all stages of interaction, microparticles expand axially with less drag that suppresses their radial expansion. As a result, the dispersion of reactive species was mapped over an up to 80% larger area for nanoparticles relative to microparticles. Results shown here can be applied toward advancing experimental diagnostics and particle-shock wave modeling and simulation efforts for energetic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Liquid microjunction surface sampling probe fluid dynamics: Characterization and application of an analyte plug formation operational mode

The recently discovered sample plug formation and injection operational mode of a continuous flow, coaxial tube geometry, liquid microjunction surface sampling probe (LMJ-SSP) (J. Am. Soc. Mass Spectrom, 2011) was further characterized and applied for concentration and mixing of analyte extracted from multiple areas on a surface and for nanoliter-scale chemical reactions of sampled material. A transparent LMJ-SSP was constructed and colored analytes were used so that the surface sampling process, plug formation, and the chemical reactions could be visually monitored at the sampling end of the probe before being analyzed by mass spectrometry of the injected sample plug. Injection plug peak widths were consistent for plug hold times as long as the 8 minute maximum attempted (RSD below 1.5%). Furthermore, integrated injection peak signals were not significantly different for the range of hold times investigated. The ability to extract and completely mix individual samples within a fixed volume at the sampling end of the probe was demonstrated and a linear mass spectral response to the number of equivalent analyte spots sampled was observed. Lastly, using the color and mass changing chemical reduction of the redox dye 2,6-dichlorophenol-indophenol with ascorbic acid, the ability to sample, concentrate, and efficiently run reactions within the same plug volume within the probe was demonstrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Steady-State Calibration of a Diesel Engine in Computational Fluid Dynamics Using a Graphical Processing Unit-Based Chemistry Solver

The prospect of analysis-driven precalibration of a modern diesel engine is extremely valuable in order to significantly reduce hardware investments and accelerate engine designs compliant with stricter fuel economy regulations. Advanced modeling tools, such as CFD, are often used with the goal of streamlining significant portions of the calibration process. The success of the methodology largely relies on the accuracy of analytical predictions, especially engine-out emissions. However, the effectiveness of CFD simulation tools for in-cylinder engine combustion is often compromised by the complexity, accuracy, and computational overhead of detailed chemical kinetics necessary for combustion calculations. The standard approach has been to use skeletal kinetic mechanisms (~50 species), which consume acceptable computational time but with degraded accuracy. In this work, a comprehensive demonstration and validation of the analytical precalibration process is presented for a passenger car diesel engine using CFD simulations and a graphical processing unit (GPU)-based chemical kinetics solver (Zero-RK, developed at Lawrence Livermore National Laboratory, Livermore, CA) on high performance computing resources to enable the use of detailed kinetic mechanisms. Diesel engine combustion computations have been conducted over 600 operating points spanning in-vehicle speed-load map, using massively parallel ensemble simulation sets on the Titan supercomputer located at the Oak Ridge Leadership Computing Facility. The results with different mesh resolutions have been analyzed to compare differences in combustion and emissions (NOx, carbon monoxide CO, unburned hydrocarbons (UHC), and smoke) with actual engine measurements. The results show improved agreement in combustion and NOx predictions with a large n-heptane mechanism consisting of 144 species and 900 reactions with refined mesh resolution; however, agreement in CO, UHC, and smoke remains a challenge.

42 ENGINEERING↗