Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FARMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Enabling Renewable Energy While Protecting Wildlife: An Ecological Risk-Based Approach to Wind Energy Development Using Ecosystem-Based Management Values

Acceptance of wind energy development is challenged by stakeholders’ concerns about potential effects on the environment, specifically on wildlife, such as birds, bats, and (for offshore wind) marine animals, and the habitats that support them. Communities near wind energy developments are also concerned with social and economic impacts, as well as impacts on aesthetics, historical sites, and recreation and tourism. Lack of a systematic, widely accepted, and balanced approach for measuring the potential damage to wildlife, habitats, and communities continues to leave wind developers, regulators, and other stakeholders in an uncertain position. This paper explores ecological risk-based management (RBM) in wind energy development for land-based and offshore wind installations. This paper provides a framework for the adaptation of ecosystem-based management to wind energy development and examines that framework through a series of case studies and best management practices for applying risk-based principles to wind energy. Ten case studies indicate that wind farm monitoring is often driven by regulatory requirements that may not be underpinned by scientific questions. While each case applies principles of adaptive management, there is room for improvement in applying scientific principles to the data collection and analysis. Challenges and constraints for wind farm development to meet RBM framework criteria include collecting sufficient baseline and monitoring data year-round, engaging stakeholder facilitators, and bringing together large and diverse scientific teams. The RBM framework approach may provide insights for improved siting and consenting/permitting processes for regulators and their advisors, particularly in those nations where wind energy is still in the early development stages on land or at sea.

17 WIND ENERGY↗
DOE OSTI2023

Airborne flux measurements of ammonia over the southern Great Plains using chemical ionization mass spectrometry

Abstract. Ammonia (NH3) is an abundant trace gas in the atmosphere and an important player in atmospheric chemistry, aerosol formation and the atmosphere–surface exchange of nitrogen. The accurate determination of NH3 emission rates remains a challenge, partly due to the propensity of NH3 to interact with instrument surfaces, leading to high detection limits and slow response times. In this paper, we present a new method for quantifying ambient NH3, using chemical ionization mass spectrometry (CIMS) with deuterated benzene cations as reagents. The setup aimed at limiting sample–surface interactions and achieved a 1σ precision of 10–20 pptv and an immediate 1/e response rate of < 0.4 s, which compares favorably to the existing state of the art. The sensitivity exhibited an inverse humidity dependence, in particular in relatively dry conditions. Background of up to 10 % of the total signal required consideration as well, as it responded on the order of a few minutes. To showcase the method's capabilities, we quantified NH3 mixing ratios from measurements obtained during deployment on a Gulfstream I aircraft during the HI-SCALE (Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems) field campaign in rural Oklahoma during May 2016. Typical mixing ratios were 1–10 parts per billion by volume (ppbv) for the boundary layer and 0.1–1 ppbv in the lower free troposphere. Sharp plumes of up to tens of ppbv of NH3 were encountered as well. We identified two of their sources as a large fertilizer plant and a cattle farm, and our mixing ratio measurements yielded upper bounds of 350 ± 50 and 0.6 kg NH3 h−1 for their respective momentary source rates. The fast response of the CIMS also allowed us to derive vertical NH3 fluxes within the turbulent boundary layer via eddy covariance, for which we chiefly used the continuous wavelet transform technique. As expected for a region dominated by agriculture, we observed predominantly upward fluxes, implying net NH3 emissions from the surface. The corresponding analysis focused on the most suitable flight, which contained two straight-and-level legs at ∼ 300 m above ground. We derived NH3 fluxes between 1 and 11 mol km−2 h−1 for these legs, at an effective spatial resolution of 1–2 km. The analysis demonstrated how flux measurements benefit from suitably arranged flight tracks with sufficiently long straight-and-level legs, and it explores the detrimental effect of measurement discontinuities. Following flux footprint estimations, comparison to the NH3 area emissions inventory provided by the U.S. Environmental Protection Agency indicated overall agreement but also the absence of some sources, for instance the identified cattle farm. Our study concludes that high-precision CIMS measurements are a powerful tool for in situ measurements of ambient NH3 mixing ratios, and even allow for the airborne mapping of the air–surface exchange of NH3.

58 GEOSCIENCES↗
DOE OSTI2024

Toward on-demand measurements of greenhouse gas emissions using an uncrewed aircraft AirCore system

This paper evaluates the performance of a multirotor uncrewed aircraft and AirCore system (UAAS) for measuring vertical profiles of wind velocity (speed and direction) and the mole fractions of methane (CH 4 ) and carbon dioxide (CO 2 ), and it presents a use case that combines UAAS measurements and dispersion modeling to quantify CH 4 emissions from a dairy farm. To evaluate the atmospheric sensing performance of the UAAS, four field deployments were performed at three locations in the San Joaquin Valley of California where CH 4 hotspots were observed downwind of dairy farms. A comparison of the observations collected on board the UAAS and an 11 m meteorological tower show that the UAAS can measure wind velocity trends with a root mean squared error varying between 0.4 and 1.1 m s -1 when the wind magnitude is less than 3.5 m s -1 . Findings from UAAS flight deployments and a calibration experiment also show that the UAAS can reliably resolve temporal variations in the mole fractions of CH 4 and CO 2 occurring over periods of 10 s or longer. Results from the UAAS and dispersion modeling use case further demonstrate that UAASs have great potential as low-cost tools for detecting and quantifying CH 4 emissions in near real time.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Spectral proper orthogonal decomposition of active wake mixing dynamics in a stable atmospheric boundary layer

Recent advancements in the use of active wake mixing (AWM) to reduce wake effects on downstream turbines open new avenues for increasing power generation in wind farms. However, a better understanding of the fluid dynamics underlying AWM is still needed to make wake mixing a reliable strategy for wind farm flow control. In this work, a spectral proper orthogonal decomposition (SPOD) is used to analyze the dynamics of coherent flow structures that are induced in the wake through blade pitch actuation. The data are generated using the ExaWind software suite to perform large eddy simulations of an NREL 2.8 MW turbine operating in a stable atmospheric boundary layer. SPOD tracks the modal behavior of flow structures from their generation in the turbine induction field through their growth in the near-wake region and to their subsequent evolution and energy transfers in the far wake. SPOD is shown to be a useful tool in the context of AWM because it translates the wavenumber and frequency inputs to the turbine controller to structures in the wake. A decomposition of the radial shear stress flux in the wake is also developed using SPOD to measure the contribution of coherent flow structures to mean flow turbulent entrainment and wake recovery. The effectiveness of AWM is connected to its ability to excite inherent structures in the wake of the turbine that arise using baseline controls. The effects of AWM on blade loading are also analyzed by connecting the axial force along the blade to the SPOD analysis of the turbine induction field. Lastly, the performance of different AWM strategies is demonstrated in a two-turbine array.

17 WIND ENERGY↗
DOE OSTI2025

Characterization of HRRR-simulated rotor layer wind speeds and clouds along the coast of California

Stratocumulus clouds, with their low cloud base and top, affect the atmospheric boundary layer wind and turbulence profile, thereby modulating wind energy resources. GOES satellite data reveal an abundance of stratocumulus clouds in the late spring and summer months off the coast of northern and central California, where there are active plans to deploy floating offshore wind farms at two lease areas (near Morro Bay and Humboldt). Since the fall of 2020, two buoys equipped with multiple instruments, including Doppler lidar, have been deployed for about 1 year in these wind farm lease areas to assess the rotor layer wind conditions in these locations. The objective of this study is to evaluate how well the High-Resolution Rapid Refresh (HRRR) model represents stratocumulus cloud characteristics and turbine-relevant rotor layer winds (surface to 300 m) by comparing HRRR simulations with buoy and satellite observations. We first find that the HRRR model reproduces the seasonal cycle of cloud top height reasonably well in these regions. However, during the warm season – especially at Morro Bay – the HRRR-simulated stratocumulus clouds tend to have lower tops by about 150 m and exhibit weaker diurnal cycles than satellite observations. Our analysis also shows that rotor layer wind speeds and vertical shear are stronger at Humboldt than at Morro Bay, and both are generally stronger under clear-sky conditions. Finally, the HRRR model bias in rotor layer wind speed is small under cloudy conditions but larger and dependent on observed wind speed under clear skies. Specifically, HRRR underestimates wind speeds at Morro Bay and overestimates them at Humboldt under clear-sky conditions.

17 WIND ENERGY↗
DOE OSTI2026

Added value of site load measurements in probabilistic lifetime extension: a Lillgrund case study

Site-specific fatigue estimation is an essential part of wind turbine lifetime extension, with various methods depending on data availability. The present study compares probabilistic lifetime extension assessment results for rotor blades with and without load measurements. It also addresses two key questions in such assessments: the applicability of the Frandsen model for estimating waked turbulence under complex and mixed wake conditions and the extrapolation of mid-term data over longer time periods. The case study wind turbine is SWT-2.3-93, located at the edge of the Lillgrund wind farm, situated in the Øresund Strait between Denmark and Sweden. The turbine is extensively instrumented, with 5 years of data available from its supervisory control and data acquisition (SCADA) system. Although the Frandsen turbulence estimates deviate in a different manner from measurements at below- and above-rated mean wind speeds, the model remains a conservative approach for fatigue load prediction and reliability. In the current case study, the site-specific assessment using strain gauge measurements yields a 33 % higher annual fatigue reliability index after 35 years compared to a scenario based on the Frandsen estimation combined with ambient environmental data and a generic aeroelastic model. The results also demonstrate that the sensitivity of fatigue reliability to load uncertainty is negligible when load measurements are used directly but relatively high when relying on the Frandsen model in combination with a generic aeroelastic model. Overall, the high variability of the lifetime extension in different scenarios of data availability and accuracy shows the importance and added value of high-quality measurements combined with wind-farm-level SCADA and a model updated in real time (digital twins).

17 WIND ENERGY↗
DOE OSTI2020

The importance of round-robin validation when assessing machine-learning-based vertical extrapolation of wind speeds

The extrapolation of wind speeds measured at a meteorological mast to wind turbine rotor heights is a key component in a bankable wind farm energy assessment and a significant source of uncertainty. Industry-standard methods for extrapolation include the power-law and logarithmic profiles. The emergence of machine-learning applications in wind energy has led to several studies demonstrating substantial improvements in vertical extrapolation accuracy in machine-learning methods over these conventional power-law and logarithmic profile methods. In all cases, these studies assess relative model performance at a measurement site where, critically, the machine-learning algorithm requires knowledge of the rotor-height wind speeds in order to train the model. This prior knowledge provides fundamental advantages to the site-specific machine-learning model over the power-law and log profiles, which, by contrast, are not highly tuned to rotor-height measurements but rather can generalize to any site. Furthermore, there is no practical benefit in applying a machine-learning model at a site where winds at the heights relevant for wind energy production are known; rather, its performance at nearby locations (i.e., across a wind farm site) without rotor-height measurements is of most practical interest. To more fairly and practically compare machine-learning-based extrapolation to standard approaches, we implemented a round-robin extrapolation model comparison, in which a random-forest machine-learning model is trained and evaluated at different sites and then compared against the power-law and logarithmic profiles. We consider 20 months of lidar and sonic anemometer data collected at four sites between 50 and 100 km apart in the central United States. We find that the random forest outperforms the standard extrapolation approaches, especially when incorporating surface measurements as inputs to include the influence of atmospheric stability. When compared at a single site (the traditional comparison approach), the machine-learning improvement in mean absolute error was 28 % and 23 % over the power-law and logarithmic profiles, respectively. Using the round-robin approach proposed here, this improvement drops to 20 % and 14 %, respectively. These latter values better represent practical model performance, and we conclude that round-robin validation should be the standard for machine-learning-based wind speed extrapolation methods.

17 WIND ENERGY↗
DOE OSTI2022

FLOW Estimation and Rose Superposition (FLOWERS): an integral approach to engineering wake models

Abstract. Annual energy production (AEP) is often the objective function in wind plant layout optimization studies. The conventional method to compute AEP for a wind farm is to first evaluate power production for each discrete wind direction and speed using either computational fluid dynamics simulations or engineering wake models. The AEP is then calculated by weighted-averaging (based on the wind rose at the wind farm site) the power produced across all wind directions and speeds. We propose a novel formulation for time-averaged wake velocity that incorporates an analytical integral of a wake deficit model across every wind direction. This approach computes the average flow field more efficiently, and layout optimization is an obvious application to exploit this benefit. The clear advantage of this new approach is that the layout optimization produces solutions with comparable AEP performance yet is completed 2 orders of magnitude faster. The analytical integral and the use of a Fourier expansion to express the wind speed and wind direction frequency create a relatively smooth solution space for the gradient-based optimizer to excel in comparison to the existing weighted-averaging power calculation.

17 WIND ENERGY↗
DOE OSTI2024

Measurement-driven large-eddy simulations of a diurnal cycle during a wake-steering field campaign

Abstract. High-fidelity flow modeling with data assimilation enables accurate representation of the wind farm operating environment under realistic, nonstationary atmospheric conditions. Capturing the temporal evolution of the turbulent atmospheric boundary layer is critical to understanding the behavior of wind turbines under operating conditions with simultaneously varying inflow and control inputs. This paper has three parts: the identification of a case study during a field evaluation of wake steering; the development of a tailored mesoscale-to-microscale coupling strategy that resolved local flow conditions within a large-eddy simulation (LES), using observations that did not completely capture the wind and temperature fields throughout the simulation domain; and the application of this coupling strategy to validate high-fidelity aeroelastic predictions of turbine performance and wake interactions with and without wake steering. The case study spans 4.5 h after midnight local time, during which wake steering was toggled on and off five times, achieving yaw offset angles ranging from 0 to 17°. To resolve nonstationary nighttime conditions that exhibited shear instabilities, the turbulence field was evolved starting from the diurnal cycle of the previous day. These background conditions were then used to drive wind farm simulations with two different models: an LES with actuator disk turbines and a steady-state engineering wake model. Subsequent analysis identified two representative periods during which the up- and downstream turbines were most nearly aligned with the mean wind direction and had observed yaw offsets of 0 and 15°. Both periods corresponded to partial waking on the downstream turbine, which had errors in the LES-predicted power of 4 % and 6 %, with and without wake steering. The LES was also able to capture conditions during which an upstream turbine wake induced a speedup at a downstream turbine and increased power production by up to 13 %.

17 WIND ENERGY↗
DOE OSTI2023

FUN-BioCROP model with litter decomposition parameters derived from the LIDET dataset

This repository contains the code and data necessary to run the FUN-BioCROP (Fixation and Uptake of Nitrogen-Bioenergy Carbon, Rhizosphere, Organisms, and Protection) model with litter decomposition parameters derived from a modified Monte Carlo simulation that used the Long-term Intersite Decomposition Experiment Team dataset. Related publication:Juice, S.M., Ridgeway, J.R., Hartman, M.D., Parton, W.J., Berardi, D.M., Sulman, B.N., Allen, K.E., & Brzostek, E.R. Reparameterizing litter decomposition using a simplified Monte Carlo method improves litter decay simulated by a microbial model and alters bioenergy soil carbon estimates. Description of Files: FUNBioCROP_LIDET Study.Rmd R code with FUN-BioCROP model that can be run with 10 different sets of parameters for litter decomposition (Baseline, LIDET, or eight other best parameter sets identified in the modified Monte Carlo simulation. CORPSE Functions_Bioenergy_V2.R Code with CORPSE model functions, called by FUNBioCROP_LIDET Study.Rmd Model Input Data: bulk.csv, bulk_till.csv, rhizo.csv, rhizo_till.csv, litter.csv Initial C and N (kg C or N/m2) pool values for each soil compartment, final values from spin up. All five files have the same columns: (Column - Description - Units) uFastC - Unprotected fast decomposing carbon - kg carbon/m2 uSlowC - Unprotected slow decomposing carbon - kg carbon/m2 uNecroC - Unprotected necromass carbon - kg carbon/m2 pFastC - Protected fast decomposing carbon - kg carbon/m2 pSlowC - Protected slow decomposing carbon - kg carbon/m2 pNecroC - Protected necromass carbon - kg carbon/m2 livingMicrobeC - Carbon in living microbial biomass - kg carbon/m2 uFastN - Unprotected fast decomposing nitrogen - kg nitrogen/m2 uSlowN - Unprotected slow decomposing nitrogen - kg nitrogen/m2 uNecroN - Unprotected necromass nitrogen - kg nitrogen/m2 pFastN - Protected fast decomposing nitrogen - kg nitrogen/m2 pSlowN - Protected slow decomposing nitrogen - kg nitrogen/m2 pNecroN - Protected necromass nitrogen - kg nitrogen/m2 inorganicN - Inorganic nitrogen - kg nitrogen/m2 CO2 - Carbon in carbon dioxide - kg carbon/m2 livingMicrobeN - Nitrogen in living microbial biomass - kg nitrogen/m2 Model Input Data: FluxTower_AvgSoilT.csv: Average daily soil temperature (oC) at 10 cm depth at University of Illinois Urbana-Champaign (UIUC) Energy Farm flux tower from 7/2008-3/2016. (One year of averaged data) Model Input Data: FluxTower_AvgSoilVWC.csv: Average daily soil volumetric water content (VWC) at 10 cm depth at UIUC Energy Farm flux tower from 7/2008-3/2016. (One year of averaged data) Model Input Data: input_CCS_LIDET Study.csv: This file has daily data to run FUN-BioCROP (Column - Description - Units): yr - calendar year - year doy - day of year (1 to 365) (no leap year) - day anpp - aboveground NPP (DayCent) - kg C/m2/day bnpp - belowground NPP (DayCent) - kg C/m2/day aglivc - live aboveground biomass carbon (DayCent) - kg C/m2 bglivcj - live juvenile fine root biomass carbon (DayCent) - kg C/m2 bglivcm - live mature fine root biomass carbon (DayCent) - kg C/m2 aglivn - live aboveground biomass nitrogen (DayCent) - kg N/m2 bglivnj - live juvenile fine root biomass nitrogen (DayCent) - kg N/m2 bglivnm - live mature fine root biomass nitrogen (DayCent) - kg N/m2 nyr - simulation year - year cult - indicates a cultivation event (0 or 1) crop - indicates a new crop (0 or 1) fert - indicates a fertilizer event (0 or 1) frst - indicates the first day of the growing season (0 or 1) harv - indicates a harvest event (0 or 1) last - indicates the end of the growing season (0 or 1) croptype - crop type (0=none; 1=alfalfa; 2=corn; 3=grass clover pasture; 4=soybean; 5=wheat) cropsrl - crop specific root length - mm/g root cultrhizmix - fraction of rhizosphere mixed with bulk soil during cultivation (0.0-1.0) - fraction cultlitmix - fraction of litter mixed with bulk soil during cultivation (0.0-1.0) - fraction harvremov - fraction of above ground biomass removed during harvest (0.0-1.0) - fraction fertamt - fertilization amount - g N/m2 lifehist - plant life history (0 = annual, 1 = perennial) froot_turnover_c - amount of C in fine root turnover - kg C/m2 froot_turnover_n - amount of N in fine root turnover - kg N/m2 agrd_turnover_c - amount of C in aboveground biomass turnover - kg C/m2 agrd_turnover_n - amount of N in aboveground biomass turnover - kg N/m2 leaf_litter_fastfrac - Fast decomposing fraction of leaf litter (0.0-1.0) - fraction root_litter_fastfrac - Fast decomposing fraction of root litter (0.0-1.0) - fraction root_diameter - root diameter - mm root_length - root length - mm root/m2 rhizo_frac - fraction of total soil volume that is rhizosphere (0.0 - 1.0) - fraction date - date in format YYYY-MM-DD Instructions: Save the model code ("FUN-BioCROP_LIDET Study.Rmd") and accompanything files (data streams and CORPSE function code) in the same folder. In model code "Chunk 3: Load CORPSE Data Streams" set the working directory (setwd) to the folder with the files saved in step #1. In "Chunk 5: Define LIDET parameter sets" select the litter decomposition parameter set to be used in the run, and comment out all other sets. If changing any parameter values, edit them in "Chunk 6: Load parameters." Run all chunks up to and including "Chunk 10: Prepare Data for Export." In "Chunk 11: Export Output Data" edit data frames for export and filenames, as necessary. "Chunk 12: Graph Total Soil C" makes a figure of C remaining over the model run period. Description of each model chunk (in file FUN-BioCROP_LIDET Study.Rmd): Chunk 1: Remove all functions, clear memory. Removes all functions from R environment, clears the memory. Chunk 2: Load Packages. Loads packages necessary to run the code. Chunk 3: Load CORPSE Data Streams. Sets the working directory and loads the data files necessary to run CORPSE. Chunk 4: Load CORPSE Functions. Loads the R script with CORPSE functions from the working directory, "CORPSE Functions_Bioenergy_V2.R". Chunk 5: Define LIDET parameter sets. Has ten different parameter sets for litter decomposition tested in this study: Baseline parameters, LIDET parameters, and the other 8 best performing parameter sets identified in the modified Monte Carlo. To run the model, all but one parameter set must be commented out. Chunk 6: Load Parameters. Loads all fixed parameters to run the model. Data frame with definitions of parameters is in the CORPSE function script "CORPSE Functions_Bioenergy_V2.R" Chunk 7: Prepare Data Streams. Takes data streams loaded in Chunk 3 and puts them in the format necessary to run the model. The model is coded to run at least two sites at a time, so if only one site is being run it must be run in duplicate. Individual data tables of daily values are created in this chunk from the input data file. Chunk 8: Set Initial Conditions. Creates data tables of soil C and N pools for each soil compartment (rhizo_till, rhizo, bulk_till, bulk, litter) and loads initial values into the data tables. Creates lists for each soil compartment to hold model output. Chunk 9: Load FUN Data and Set Up Matrices. Uses DayCent data to calculate FUN input data: root and leaf N demand, total N demand, plant CN, leaf N available for retranslocation, and litter production. Creates matrices for FUN model outputs. Chunk 10: Run Model. Runs the model. Chunk 11: Prepare Data for Export. Combines data from each day saved as lists into data frames for each soil compartment. Adds values from all soil compartments together to calculate total soil values, creates separate data frames for each soil C and N pool (e.g., protected slow C) for the total soil value. Adds different C and N pools together to calculate total soil C and N for all layers. Creates data frame of ratio of protected to unprotected SOC. Organizes FUN data for export. Chunk 12: Export Results. Exports CSV files of model results to the working directory. Chunk 13: Graph Total Soil C. Makes figure of C remaining over time. Related Links: Original FUN-BioCROP model: https://github.com/BrzostekEcologyLab/FUN-BioCROP LIDET dataset: https://andlter.forestry.oregonstate.edu/data/abstract.aspx?dbcode=TD023

Juice, Stephanie↗
NASA NTRS1974

Automated thematic mapping and change detection of ERTS-A images

The author has identified the following significant results. A diffraction pattern analysis of MSS images led to the development of spatial signatures for farm land, urban areas and mountains. Four spatial features are employed to describe the spatial characteristics of image cells in the digital data. Three spectral features are combined with the spatial features to form a seven dimensional vector describing each cell. Then, the classification of the feature vectors is accomplished by using the maximum likelihood criterion. It was determined that the recognition accuracy with the maximum likelihood criterion depends on the statistics of the feature vectors. It was also determined that for a given geographic area the statistics of the classes remain invariable for a period of a month, but vary substantially between seasons. Three ERTS-1 images from the Phoenix, Arizona area were processed, and recognition rates between 85% and 100% were obtained for the terrain classes of desert, farms, mountains, and urban areas. To eliminate the need for training data, a new clustering algorithm has been developed. Seven ERTS-1 images from four test sites have been processed through the clustering algorithm, and high recognition rates have been achieved for all terrain classes.

Gramenopoulos, N.↗
NASA NTRS1974

Automated thematic mapping and change detection of ERTS-1 images

Results of an automated thematic mapping investigation using ERTS-1 MSS images are presented. A diffraction pattern analysis of MSS images led to the development of spatial signatures for farm land, urban areas, and mountains. Four spatial features are employed to describe the spatial characteristics of image cells in the digital data. Three spectral features are combined with the spatial features to form a seven dimensional vector describing each cell. Then, the classification of the feature vectors is accomplished by using the maximum likelihood criterion. Three ERTS-1 images from the Phoenix, Arizona area were processed, and recognition rates between 85% and 100% were obtained for the terrain classes of desert, farms, mountains and urban areas. To eliminate the need for training data, a new clustering algorithm has also been developed.

Gramenopoulos, N.↗
NASA NTRS1980

Coolidge solar powered irrigation pumping project

A 150 kW solar thermal electric power plant which includes over 2100 square meters of parabolic trough type collectors and an organic Rankine cycle turbine engine was constructed on an irrigated farm. The plant is interconnected with the electrical utility grid. Operation is providing an evaluation of equipment performance and operating and maintenance requirements as well as the desirability of an on farm location.

Larson, D. L.↗
NASA NTRS1980

Dryland pasture and crop conditions as seen by HCMM

Ground truth, aircraft, and satellite data were examined in order to: (1) assess the capability for determining wheat and pasture canopy temperatures in a dryland farming region from HCMM data; (2) assess the capability for determining soil moisture from HCMM data in dryland crops (winter wheat) from adjacent range lands; and (3) determine the relationship of HCMM-derived soil moisture and canopy temperature values with the condition of winter wheat and dryland farming areas during the principal growth stages. The IR data were screened to include areas having greater than 60% pasture and surface temperatures were recalculated using the atmospheric correction factor calculated by the modified RADTRA model, and the July 29, 1978 IR data were analyzed. Screening the IR data improved the relationship for July 24/July 13 and October 7/August 31 temperature/API relationship. However the coefficient of determination was not improved in the July 29/July 13 relationship.

Rosenthal, W. D.↗
NASA NTRS1977

Applications of remote-sensing data in Alaska

Public and private agencies were introduced to the use of remotely sensed data obtained by both satellite and aircraft, and benefitted from facilities for data processing enhancement and interpretation as well as from the institute's data library. Cooperative ventures involving the performance of operational activities included assistance to the Bureau of Land Management in the suppression of wildfires; the selection of sites for power line right-of-way; the mapping of leads in sea ice; determination of portions of public lands to be allocated for small scale farming; the identification of areas for large scale farming of barley; the observation of coastal processes and sediment transport near Prudhoe Bay; the establishment of a colar infrared file of the entire state; and photomapping for geological surveys. Monitoring of the outer continental shelf environment and reindeer herds was also conducted. Institutional constraints to full utilization of satellite remote sensing in the state are explored and plans for future activites include the generation of awareness by government agencies, the training of state personnel, and improving coordination and communication with users.

Miller, J. M.↗
NASA NTRS1982

Potential errors in using one anemometer to characterize the wind power over an entire rotor disk

Wind data collected at four levels on a 90-m tower in a prospective wind farm area are used to evaluate how well the 10-m wind speed data with and without intermittent vertical profile measurements compare with the 90-m tower data. If a standard, or even predictable, wind speed profile existed, there would be no need for a large, expensive tower. This cost differential becomes even more significant if several towers are needed to study a prospective wind farm.

Simon, R. L.↗
NASA NTRS1984

Meteorological models for estimating phenology of corn

Knowledge of when critical crop stages occur and how the environment affects them should provide useful information for crop management decisions and crop production models. Two sources of data were evaluated for predicting dates of silking and physiological maturity of corn (Zea mays L.). Initial evaluations were conducted using data of an adapted corn hybrid grown on a Typic Agriaquoll at the Purdue University Agronomy Farm. The second phase extended the analyses to large areas using data acquired by the Statistical Reporting Service of USDA for crop reporting districts (CRD) in Indiana and Iowa. Several thermal models were compared to calendar days for predicting dates of silking and physiological maturity. Mixed models which used a combination of thermal units to predict silking and days after silking to predict physiological maturity were also evaluated. At the Agronomy Farm the models were calibrated and tested on the same data. The thermal models were significantly less biased and more accurate than calendar days for predicting dates of silking. Differences among the thermal models were small. Significant improvements in both bias and accuracy were observed when the mixed models were used to predict dates of physiological maturity. The results indicate that statistical data for CRD can be used to evaluate models developed at agricultural experiment stations.

Daughtry, C. S. T.↗
NASA NTRS1985

An evaluation of oxygen-hydrogen propulsion systems for the Space Station

Conceptual designs for O2/H2 chemical and resistojet propulsion systems for the space station was developed and evaluated. The evolution of propulsion requirements was considered as the space station configuration and its utilization as a space transportation node change over the first decade of operation. The characteristics of candidate O2/H2 auxiliary propulsion systems are determined, and opportunities for integration with the OTV tank farm and the space station life support, power and thermal control subsystems are investigated. OTV tank farm boiloff can provide a major portion of the growth station impulse requirements and CO2 from the life support system can be a significant propellant resource, provided it is not denied by closure of that subsystem. Waste heat from the thermal control system is sufficient for many propellant conditioning requirements. It is concluded that the optimum level of subsystem integration must be based on higher level space station studies.

Klemetson, R. W.↗