Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extreme scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A Quasar Shedding Its Dust Cocoon at Redshift 2

We present the first near-IR spectroscopy and joint analyses of multiwavelength observations for SDSS J082747.14+425241.1, a dust-reddened, weak broad emission-line quasar (WLQ) undergoing a remarkable broad-absorption line (BAL) transformation. The systemic redshift is more precisely measured to be z = 2.070 ± 0.001 using Hβ compared to z = 2.040 ± 0.003 using Mg ιι from the literature, signifying an extreme Mg ιι blueshift of 2140 ± 530 km s –1 relative to Hβ. Using the Hβ-based single-epoch scaling relation with a systematic uncertainty of 0.3 dex, its black hole (BH) mass and Eddington ratio are estimated to be M BH ~ 6.1 × 10 8 M ⊙ and λ Edd ~ 0.71, indicative of being in a rapidly accreting phase. Our investigations confirm the WLQ nature and the LoBAL → HiBAL transformation, along with a factor of 2 increase in the Mg ιι+Fe ιι emission strength and a decrease of 0.1 in E(B – V) over two decades. The kinetic power of this LoBAL wind at R ~ 15 pc from its BH is estimated to be ~43% of the Eddington luminosity, sufficient for quasar feedback upon its host galaxy albeit with an order-of-magnitude uncertainty. This quasar provides a clear example of the long-sought scenario where LoBAL quasars are surrounded by dust cocoons, and wide-angle nuclear winds play a key role in the transition of red quasars evolving into the commonly seen blue quasars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Impacts of wind field characteristics and non-steady deterministic wind events on time-varying main-bearing loads

Abstract. This work considers the characteristics and drivers of the loads experienced by wind turbine main bearings. Simplified load response models of two different hub and main-bearing configurations are presented, representative of both inverting direct-drive and four-point-mounted geared drivetrains. The influences of deterministic wind field characteristics, such as wind speed, shear, yaw offset, and veer, on the bearing load patterns are then investigated for similarity scaled 5, 7.5, and 10 MW reference wind turbine models. Main-bearing load response in cases of deterministic gusts and extreme changes in wind direction are also considered for the 5 MW model. Perhaps surprisingly, veer is identified as an important driver of main-bearing load fluctuations. Upscaling results indicate that similar behaviour holds as turbines become larger, but with mean loads and load fluctuation levels increasing at least cubically with the turbine rotor radius. Strong links between turbine control and main-bearing load response are also observed.

17 WIND ENERGY↗
DOE OSTI2022

Impact of Fill Factor on Electro-slag Remelting Operations

Vacuum induction melting (VIM), electro-slag remelting (ESR) and vacuum arc remelting (VAR) are all techniques used to make high quality ingots of complex chemistries. In some cases, all three are used, e.g., alloys for aerospace applications and increasingly those for fossil power applications under extreme conditions. Electroslag remelting operation is a complicated endeavor, dependent upon several factors including operating current, voltage, and geometry. A research scale 440 lb capacity ESR furnace was used to melt low carbon steel (1018 steel) electrodes of different diameters using various melt rates. This was used to assess melt parameters and sidewall and other quality aspects of the product ingots. These observations were compared to results from ESR modeling using MeltFlow-ESR. It was found that fill factor had a significant impact on operating voltage while current had a significant impact on melt rate. Ultimately, a combination of fill factor and power gave the best prediction of melt rate during steady state.

Jablonski, Paul↗
DOE OSTI2024

Third-integer Resonant Extraction Regulation System for Mu2e

A third-integer resonant slow extraction system is being developed for Fermilab's Delivery Ring to deliver protons to the upcoming Mu2e experiment. The timescale of the extraction (or spill) duration is 43 milliseconds, which is extremely short and unprecedented. Additionally, the experiment's strict and challenging requirements on the quality of the spill at this time scale has led to the development of a new Spill Regulation System (SRS) design. The SRS primarily consists of three components - slow regulation, fast regulation, and harmonic content suppressor. Contributions to the first two components of the SRS, i.e., Slow Regulation and Fast Regulation subsystems, will be presented in which new adaptive learning algorithm schemes for the slow regulation of the spill -- validated using particle tracking simulations -- shall be described. In addition to these novel methods for the enhancement of the spill regulation system, results of employing Machine Learning in enhancing the performance of the resonant extraction are also presented. At the forefront of applying ML techniques to solve non-linear accelerator control problems, this work includes optimizing the PID gains as well as the replacement of the traditional PID controller using Recurrent Neural Networks and Gated Recurrent Unit (GRU) ML models to achieve efficiencies greater than a PID controller. Cutting-edge on-going Reinforcement Learning efforts, including an actor-critic family of learning algorithms, to regulate the spill rate will be reviewed, as well as present analytical calculations pertaining the transit time of particles in a third-integer resonant extraction. Detailed numerical investigations and validations of such calculations, the model of which could be exported and reliably used in future analytical modeling of any resonant extraction, are discussed.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Large-scale Hydrogen Storage – Risk Assessment Seattle City Light and Port of Seattle [Abstract]

This CRADA presents the strategy that Pacific Northwest National Laboratory (PNNL) and Sandia National Laboratories (SNL) will take to support Seattle City Light (SCL), and the Port of Seattle (Port) in performing a risk assessment of large-scale hydrogen storage. Risk assessment is often used to ensure that adequate measures are taken to protect workers and the public, the environment, infrastructure, and assets. A detailed risk assessment can also be used to direct funding and upgrades, to specific components and sub-systems in order to mitigate risks to the larger system. In this way risk assessments are often employed as a part of a larger risk management strategy, with the goal of minimizing the occurrence of hazards and to identify means to limit their consequences. Risk assessment is often used to engage and inform regulators, and to communicate how specific regulations are being met. However, it is important to note that the proposed work is not intended for SCL and the Port to use in order to gain regulatory acceptance for their proposed activities. The work performed as a part of this effort will be a preliminary risk assessment for early-stage component and system designs and should be considered research and development (R&D). As such, the proposed work will be performed to a quality level and design maturity consistent with R&D and is not considered appropriate for final safety analysis and regulatory compliance purposes. Previous and on-going work at SCL and the Port demonstrated the utility of deploying hydrogen systems at the Port. The deployment of hydrogen at the Port is a part of a larger vision of using hydrogen to address a range of issues for SCL and the Port. These include large-scale fueling of MD/HD vehicles, cargo-handling equipment (CHE), and harbor vessels to reduce emissions; support of adjacent LD vehicles; support of critical port operations during extreme events (i.e., resiliency); deferral of more capital- and time-intensive electrical distribution system upgrades while still supporting evolving port operations and decarbonization efforts; facilitating electrification by establishing energy storage as a grid resource, starting at strategic port locations; creation of a flexible market resource that can be used by SCL to generate revenue via arbitrage; support of planned future maritime operations that involve heavy use of hydrogen for ocean-going vessels; and future end-use applications involving natural gas pipeline hydrogen injection. Ultimately, the success of these activities is underpinned by the deployed storage capacity. Large-scale deployment of hydrogen systems will require hydrogen storage at a scale that has not been demonstrated. In addition, the ideal location for such multi-use systems is near the end user which will often necessitate deploying into urban and/or industrial areas. A detailed risk assessment using the Port as a test case is necessary to ensure the deployment of large-scale hydrogen is successful. Many technologies have been proposed for hydrogen storage; however, these technologies need to be analyzed as they apply to an actual site. The physical infrastructure and hydrogen use cases for the Port will be analyzed, and a risk assessment for compressed hydrogen, liquified hydrogen, and Liquid Organic Hydrogen Carrier (LOHC) storage will be performed. These risk assessments will be useful for understanding how each of these technologies would perform in terms of facility and public safety. The operating states of the proposed hydrogen systems at the Port will be analyzed and incorporated into the storage risk assessment. Scalability will also be analyzed to understand how future port uses would affect the overall risk assessment. Finally, using the risk assessment as a tool to inform engagement and to gain stakeholder acceptance will be explored.

08 HYDROGEN↗
DOE OSTI2021

Climate Extremes and Variability Surrounding Chesapeake Bay: Past, Present, and Future

Measures of extreme climate variability around Chesapeake Bay have changed over the past century (1895–2014), resulting in the need to establish new baselines for understanding future change. Here, observed climate variability is compared with Coupled Model Intercomparison Project fifth assessment climate models to evaluate ensemble model skill in this region. Observed trends include annual and seasonal declines in the percentage of cold days. Similarly, increases in the annual and seasonal percentages of warm days occurred in all seasons of the North Chesapeake (>38.2°N) but were only significant in spring and summer in the South (<38.2°N) demonstrating regional differences even at local scales. Precipitation intensity increased over the past century. Models using emissions scenarios RCP4.5 and 8.5 project these trends will continue, though they have little skill in precipitation extremes. Pacific and Atlantic climate modes are generally more correlated with climate extremes than mean temperature and precipitation suggesting potential predictability in the synoptic patterns underlying the extremes. However, they also drive the need for time series at least 60-years long for establishing climate trends. This local analysis differs from regional, state level, and local 2.5° × 3.75° grid analyses, highlighting the importance of local climate assessments that consider topographic and regional weather patterns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Leveraging ARM Data to Improve Models for Predictive Understanding of Energy and Security Challenges

Extreme weather and natural hazards can disrupt the energy sector, affecting demand, generation, transmission, distribution, consumption and operational planning at regional and national scales. These disruptions stem from a broad range of atmospheric phenomena, including winter storms, freezing rain, wet snow loading, severe convection, flooding and landslides, wildfires, prolonged heat, and drought. Many of these same phenomena can also affect national security through impacts to transportation and infrastructure. To support the U.S. Department of Energy (DOE) focus on energy resilience and national security, the Atmospheric Radiation Measurement (ARM) User Facility is uniquely positioned to contribute measurement data, analyses, and modeling frameworks that can significantly improve predictive understanding of these hazards to mitigate their effects. To explore this opportunity, ARM convened a two-part virtual workshop in November 2025. The workshop engaged interdisciplinary experts in atmospheric science, energy systems, modeling, and operations. The goal of the meeting was to engage with these interdisciplinary experts to address three questions: • What are examples of atmospheric processes that represent significant risks to energy security or national security and where are those risks greatest? • What measurements or measurement strategies would improve ARM’s capacity to address these issues? • How can ARM and users of the ARM facility better work with the Energy Exascale Earth System Model (E3SM) and multi-sector modeling communities to apply ARM data to improving E3SM simulations of these phenomena? Participants were asked to submit white papers ahead of the meeting to initiate thinking on these themes and to help organize discussions. Workshop sessions were then organized around themes identified in the white papers. First from the white papers and then through subsequent discussions, workshop participants identified many examples that address the three questions listed above. Participants called out energy system vulnerabilities to weather phenomena such as the impact of freezing rain, strong winds, and excessive heat on power grids. They also noted the effects that weather phenomena could have on energy demand or supply (e.g., through effects of extreme temperatures). They called out security vulnerabilities such as impacts to crops from aerosol-borne pathogens and risks to industry due to melting permafrost in the Arctic. In all, over a dozen meteorological phenomena were linked to energy or security vulnerabilities. For many of the identified phenomena, participants pointed out where ARM was well poised to address issues (e.g., through measurements of cloud microphysics to inform studies of freezing rain) but also noted needs for additional measurements or modified measurement strategies. For example, adaptive scanning of severe weather would be valuable for probing winter storms or severe convection. Participants pointed out the value in integrating external observations with ARM measurements and with applying artificial intelligence (AI) to ARM observation analysis and they advocated for using model simulations to help optimize measurement strategies through Observing System Simulation Experiments (OSSEs). It was clear from the workshop that there are many ways that ARM observations can be used to mitigate energy and security concerns, but meeting participants were also asked to identify what they considered to be the greatest opportunities by ranking issues pertaining to the three workshop questions. This was accomplished through a survey administered to participants between the two virtual sessions. The highest-priority phenomena identified were winter storms, severe convection, and arctic processes. Discussion in the second session, therefore, focused primarily on these three areas, which were most fully developed in exploring ARM opportunities. Nevertheless, it was also clear that ARM has opportunities to contribute to all the identified topics. This report describes the workshop, including input from discussion and white papers (Sections 2 and 3) and a list of priority recommendations (section 4). Many other ideas for ARM contributions are discussed in individual white papers (Appendix D).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Coordination and control – limits in standard representations of multi-reservoir operations in hydrological modeling

Abstract. Major multi-reservoir cascades represent a primary mechanism for dealing with hydrologic variability and extremes within institutionally complex river basins worldwide. These coordinated management processes fundamentally reshape water balance dynamics. Yet, multi-reservoir coordination processes have been largely ignored in the increasingly sophisticated representations of reservoir operations within large-scale hydrological models. The aim of this paper is twofold, namely (i) to provide evidence that the common modeling practice of parameterizing each reservoir in a cascade independently from the others is a significant approximation and (ii) to demonstrate potential unintended consequences of this independence approximation when simulating the dynamics of hydrological extremes in complex reservoir cascades. We explore these questions using the Water Balance Model, which features detailed representations of the human infrastructure coupled to the natural processes that shape water balance dynamics. It is applied to the Upper Snake River basin in the western US and its heavily regulated multi-reservoir cascade. We employ a time-varying sensitivity analysis that utilizes the method of Morris factor screening to explicitly track how the dominant release rule parameters evolve both along the cascade and in time according to seasonal high- and low-flow events. This enables us to address aim (i) by demonstrating how the progressive and cumulative dominance of upstream releases significantly dampens the ability of downstream reservoir rules' parameters to influence flow conditions. We address aim (ii) by comparing simulation results with observed reservoir operations during critical low-flow and high-flow events in the basin. Our time-varying parameter sensitivity analysis with the method of Morris clarifies how independent single-reservoir parameterizations and their tacit assumption of independence leads to reservoir release behaviors that generate artificial water shortages and flooding, whereas the observed coordinated cascade operations avoided these outcomes for the same events. To further explore the role of (non-)coordination in the large deviations from the observed operations, we use an offline multi-reservoir water balance model in which adding basic coordination mechanisms drawn from the observed emergency operations is sufficient to correct the deficiencies of the independently parameterized reservoir rules from the hydrological model. These results demonstrate the importance of understanding the state–space context in which reservoir releases occur and where operational coordination plays a crucial role in avoiding or mitigating water-related extremes. Understanding how major infrastructure is coordinated and controlled in major river basins is essential for properly assessing future flood and drought hazards in a changing world.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The mechanics of brittle granular materials with coevolving grain size and shape

The influence of particle shape on the mechanics of sand is widely recognized, especially in mineral processing and geomechanics. However, most existing continuum theories for engineering applications do not encompass the morphology of the grains and its evolution during comminution. Similarly, the relatively few engineering models accounting for grain-scale processes tend to idealize particles as spheres, with their diameters considered as the primary and sole geometric descriptor. This paper inspires a new generation of constitutive laws for crushable granular continua with arbitrary, yet evolving, particle morphology. We explore the idea of introducing multiple grain shape descriptors into Continuum Breakage Mechanics (CBM), a theory originally designed to track changes in particle size distributions during confined comminution. We incorporate the influence of these descriptors on the elastic strain energy potential and treat them as dissipative state variables. In analogy with the original CBM, and in light of evidence from extreme fragmentation in nature, the evolution of the additional shape descriptors is postulated to converge towards an attractor. Comparisons with laboratory experiments, discrete element analyses and particle-scale fracture models illustrate the encouraging performance of the theory. The theory provides insights into the feedback among particle shape, compressive yielding and inelastic deformation in crushable granular continua. These results inspire new questions that should guide future research into crushable granular systems using particle-scale imaging and computations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Precision bootstrap for the $\mathcal{N}$ = 1 super-Ising model

In this note we report an improved determination of the scaling dimensions and OPE coefficients of the minimal supersymmetric extension of the 3d Ising model using the conformal bootstrap. We also show how this data can be used as input to the Lorentzian inversion formula, finding good agreement between analytic calculations and numerical extremal spectra once mixing effects are resolved.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

BPS fivebrane stars. Part I. Expectation values of observables

We study ensembles of 1/2-BPS bound states of fundamental strings and NS-fivebranes (NS5-F1 states) in the AdS decoupling limit. We revisit a solution corresponding to an ensemble average of these bound states, and find that the appropriate duality frame for describing the near-source structure is the T-dual NS5-P frame, where the bound state is a collection of momentum waves on the fivebranes. We find that the fivebranes are generically well-separated; this property results in the applicability of perturbative string theory. The geometry sourced by the typical microstate is not close to that of an extremal non-rotating black hole; instead the fivebranes occupy a ball whose radius is parametrically much larger than the “stretched horizon” scale of the corresponding black hole. These microstates are thus better characterized as BPS fivebrane stars than as small black holes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Gas hydrate deposit formation in transient flowloop tests and mitigation with a surface treatment

Thermodynamic and thermal mitigation strategies are traditionally utilized to prevent gas hydrate formation but may be rendered ineffective for certain unplanned, extended shut-in scenarios. Unfortunately, the current knowledge regarding transient gas hydrate formation has been extremely limited to only a few studies and unable to address this complex issue adequately. This work, conducted in a lab-scale flowloop, aims to add to the understanding of this area by delving into the implications of transient conditions on gas hydrate formation mechanisms, while also exploring a possible mitigation strategy of a surface treatment. Specifically, the effects of phase separation on gas hydrate formation locations, transportability, and plugging are presented for an oil-dominated system. An omniphobic surface treatment is shown to affect initial gas hydrate deposition and its wall adherence strength, as well as the overall plugging outcome. Overall, this work combines observational information with process data measurements to provide a better understanding of phase separated gas hydrate systems and passive deposition mitigation strategies. This can further aid advanced gas hydrate modeling efforts, which currently do not adequately address transient flow effects on phase separation/dispersion. Here, it offers representative gas hydrate testing for coatings, which have exclusively been limited to non-flowing and/or bench-scale analysis, to give confidence in their potential application as advanced deposition prevention tools.

03 NATURAL GAS↗
DOE OSTI2024

Alkali cation stabilization of defects in 2D MXenes at ambient and elevated temperatures

Transition metal carbides have been adopted in energy storage, conversion, and extreme environment applications. Advancements in their 2D counterparts, known as MXenes, enable the design of unique structures at the ~1 nm thickness scale. Alkali cations have been essential in MXenes manufacturing processing, storage, and applications, however, exact interactions of these cations with MXenes are not fully understood. In this study, using Ti 3 C 2 T x , Mo 2 TiC 2 T x , and Mo 2 Ti 2 C 3 T x MXenes, we present how transition metal vacancy sites are occupied by alkali cations, and their effect on MXene structure stabilization to control MXene’s phase transition. We examine this behavior using in situ high-temperature x-ray diffraction and scanning transmission electron microscopy, ex situ techniques such as atomic-layer resolution secondary ion mass spectrometry, and density functional theory simulations. In MXenes, this represents an advance in fundamentals of cation interactions on their 2D basal planes for MXenes stabilization and applications. Broadly, this study demonstrates a potential new tool for ideal phase-property relationships of ceramics at the atomic scale.

42 ENGINEERING↗
DOE OSTI2023

MArVD2: a machine learning enhanced tool to discriminate between archaeal and bacterial viruses in viral datasets

Abstract Our knowledge of viral sequence space has exploded with advancing sequencing technologies and large-scale sampling and analytical efforts. Though archaea are important and abundant prokaryotes in many systems, our knowledge of archaeal viruses outside of extreme environments is limited. This largely stems from the lack of a robust, high-throughput, and systematic way to distinguish between bacterial and archaeal viruses in datasets of curated viruses. Here we upgrade our prior text-based tool (MArVD) via training and testing a random forest machine learning algorithm against a newly curated dataset of archaeal viruses. After optimization, MArVD2 presented a significant improvement over its predecessor in terms of scalability, usability, and flexibility, and will allow user-defined custom training datasets as archaeal virus discovery progresses. Benchmarking showed that a model trained with viral sequences from the hypersaline, marine, and hot spring environments correctly classified 85% of the archaeal viruses with a false detection rate below 2% using a random forest prediction threshold of 80% in a separate benchmarking dataset from the same habitats.

Vik, Dean (ORCID:000000027546899X)↗
DOE OSTI2020

GentenMPI: Distributed Memory Sparse Tensor Decomposition

GentenMPl is a toolkit of sparse canonical polyadic (CP) tensor decomposition algorithms that is designed to run effectively on distributed-memory high-performance computers. Its use of distributed-memory parallelism enables it to efficiently decompose tensors that are too large for a single compute node's memory. GentenMPl leverages Sandia's decades-long investment in the Trilinos solver framework for much of its parallel-computation capability. Trilinos contains numerical algorithms and linear algebra classes that have been optimized for parallel simulation of complex physical phenomena. This work applies these tools to the data science problem of sparse tensor decomposition. In this report, we describe the use of Trilinos in GentenMPl, extensions needed for sparse tensor decomposition, and implementations of the CP-ALS (CP via alternating least squares) and GCP-SGD (generalized CP via stochastic gradient descent) sparse tensor decomposition algorithms. We show that GentenMPl can decompose sparse tensors of extreme size, e.g., a 12.6-terabyte tensor on 8192 computer cores. We demonstrate that the Trilinos backbone provides good strong and weak scaling of the tensor decomposition algorithms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Systems Engineering of Rhodococcus opacus to Enable Production of Drop-in Fuels from Lignocellulose

Production of drop-in fuels from lignocellulose using Rhodococcus opacus PD630 (hereafter R. opacus) is a challenging goal. During the grant period we have pushed the field forward significantly in several areas of research. Towards the end goal of accelerating the adoption of R. opacus in biofuel production, during the grant period we have expanded the phenotypic characterization of R. opacus grown in single aromatic (model lignocellulosic) compounds or their mixtures, modeling the growth conditions in lignocellulosic biomass. Harnessing the power of adaptive evolution, we produced evolved R. opacus isolates with superior lignin valorization capabilities and identified differentially expressed genes and pathways after adaptation. We used next generation multi-omic techniques such as genomic, transcriptomic, and metabolomic analyses, to identify the catabolic pathways used by R. opacus to degrade aromatic compounds and funnel these degradation products into central metabolism, as well as the aromatic transport genes required for increased tolerance and utilization. Taking this information one step further, we identified endogenous transcription factors and regulatory mechanisms important for degradation of five model aromatic compounds. To accurately estimate R. opacus growth and consumption on model lignin compounds we pioneered the use of novel extraction procedures prior to GC-MS analysis. Alongside 13 C-metabolic flux analysis, we have elucidated the metabolic routes preferred by Rhodococcus opacus during aromatic compound degradation. Finally, we used in tandem lipidomics and high-resolution mass spectrometry to identify the modulation of mycolic acids and phospholipid membrane composition modification as a strategy for aromatic tolerance in R. opacus. Being a non-model organism, R. opacus lacks the breadth of tools and technical foundation which drive biofuel research in more well-understood microbes such as Escherichia coli. To reduce this burden for use, we designed and produced new tools for genomic manipulation and engineering in R. opacus. These engineering breakthroughs support efficient genomic editing, enabling gene overexpression, repression, and genetic alteration. Using these tools, we have generated synthetically engineered strains with increased lipogenesis and growth, both positive traits required for increased lignin valorization. Optimizing engineered strains for biofuel production from lignocellulose requires extremely sophisticated synthetic rewiring of metabolism. To facilitate systems-level reorganization of metabolism in R. opacus, we created a genome-scale model that accurately predicts metabolic flux and growth rates on the aromatic compound phenol. Lignin requires extensive pre-treatment before biological degradation by R. opacus. Towards an eventual goal of degrading real-world lignin, we developed new depolymerization processes to generate lignin breakdown products (LBP). We optimized LBP storage and composition analysis techniques, enabling accurate prediction of specific LBP compound integration into cell wall components. Overall, through the work funded by this grant we generated 20 manuscripts (17 published, 3 in review/preparation), methods for increased accuracy in metabolomics of aromatic compounds, multiple genetic tools for altering the R. opacus genome, genome scale models for predicting flux through metabolic pathways, as well as multi-omic data for community use. The work funded by this grant has increased the knowledge of aromatic degradation in bacteria and advanced our efforts to optimize R. opacus for lignin valorization.

09 BIOMASS FUELS↗
DOE OSTI2023

Metaoptics Enabled Multifunctional Imaging

Despite the fact that most microorganisms occupy two- and three-dimensional space in heterogeneous arrangements and in proximity to other microorganisms of different species, much of our current knowledge about their metabolic processes is derived from homogenizing, then analyzing, the chemical content of cultures containing a single microbial species. This project addressed this fundamental dichotomy by developing a set of optical imaging principles combining multiple new technologies. The imaging strategies developed in this project combine metaoptics structures with active in situ nanoscale control of the chemical environment and applied them to a microbial system, Myxococcus xanthus, with particular relevance to the DoE mission. The combination of metaoptical architectures and nanoscale control over the molecular environment enables: (a) precise control over the electromagnetic (EM) field at length scales smaller than the wavelength of light; (b) control of the interaction of the EM field with critical molecular systems in DOE relevant microbes; (c) control over the chemical environment – especially the presence and quantity of reactive oxygen species (ROS) that can affect redox homeostasis; and (d) the ability to ask new kinds of questions not accessible to ‘omics’ approaches or standard methods of biological imaging. These capabilities are applicable to detailed studies of metabolic pathways in microbes and to lignocellulosic biomass deconstruction. To accomplish these objectives, we pursued two over-arching technical goals: (1) the development of new metaoptics-enabled approaches to imaging and spectroscopic characterization; and (2) the development of tools to control the chemical environment of a microbial sample with nanometer-scale precision. Goal 1 was addressed through the design, fabrication, and characterization of new metasurfaces capable of super-resolution imaging through extreme confinement of the optical field. Goal 2 was addressed by controlling the redox potential on the nanoscale in microbial communities and characterizing their effect on intrinsic bacterial fluorophores which act as molecular sentinels and through characterization of soluble factors secreted by Myxococcus xanthus by confocal Raman imaging. The optical imaging/sensing approaches developed here make it possible to use these powerful new imaging and sensing modalities in metabolic studies by making it possible to visualize and track the spatial and temporal expression patterns of natural or engineered pathways in microorganisms.

09 BIOMASS FUELS↗
DOE OSTI2025

Looking at extremal black holes from very far away

Near-extremal black holes are subject to large quantum effects, which modify their low-temperature thermodynamic behavior. Hitherto, these quantum effects were analyzed by separating the geometry into the near-horizon region and its exterior. It is desirable to understand and reproduce such corrections from the full higher-dimensional asymptotically flat or AdS geometry’s perspective. We address this question in this article and fill this gap. Specifically, we find off-shell eigenmodes of the quadratic fluctuation operator of the Euclidean gravitational dynamics, with eigenvalues that vanish linearly with temperature. We illustrate this for BTZ and neutral black holes with hyperbolic horizons in AdS in Einstein-Hilbert theory, and for the charged black holes in Einstein-Maxwell theory. The linear scaling with Matsubara frequency, which is a distinctive feature of the modes, together with the fact that their wavefunctions localize close to the horizon as we approach extremality, identifies them as responsible for the aforementioned quantum effects. We provide a contour prescription to deal with the sign indefiniteness of the Euclidean Einstein-Maxwell action, which we derive to aid our analysis. We also resolve a technical puzzle regarding modes associated with rotational isometries in stationary black hole spacetimes.

AdS-CFT Correspondence↗