Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Interband transitions in strained InGaAs/AlAsSb multiple-quantum-well structures

Room temperature photoreflectance (PR) was performed on strained In{sub x}Ga{sub 1-x}As/AlAsSb quantum wells (QWs) grown on InP substrates. We observed clear and well-resolved structures, which could be attributed to the interband optical transitions originating in the QWs. By comparing the transition energies measured from the PR spectra with those theoretically calculated from the confined energy levels in the QWs, we confirmed that the value of the conduction band offset of In{sub 0.8}Ga{sub 0.2}As/AlAsSb was close to 1.7 eV and the nonparabolicity of the conduction band of In{sub 0.8}Ga{sub 0.2}As was between 2.25 and 2.5, which is higher than that obtained using a three-band model.

36 MATERIALS SCIENCE↗

Efficient 2.0 μm emission in Nd3+/Ho3+ co-doped SiO2-Al2O3-Na2CO3-SrF2-CaF2 glasses for mid-infrared laser applications

Highlights: • The Ho{sup 3+} and Nd{sup 3+}/Ho{sup 3+} co-doped glasses were prepared by melt quenching method. • Nd{sup 3+} ions act as a good sensitizer for getting intense emission around at ∼2.0 μm. • The (σ{sup M}{sub emi}) emission cross-section has been found to be 3.85 × 10{sup −21} cm{sup 2}. • The energy transfer efficiency has been reached 50% from Nd{sup 3+} to Ho{sup 3+} ions. • The present glasses could be potential medium for ∼2.0 μm mid-infrared applications. - Abstract: Nd{sup 3+}/Ho{sup 3+} co-doped SiO{sub 2}-Al{sub 2}O{sub 3}-Na{sub 2}CO{sub 3}-SrF{sub 2}-CaF{sub 2}-Ho{sub 2}O{sub 3}-Nd{sub 2}O{sub 3} oxyfluorosilicate glasses have been prepared by high temperature melt-quenching method. The co-doped samples exhibit fluorescence bands centered at 892, 1058, 1330 nm and 2.0 μm under the excitation of 808 nm laser diode (LD). The energy transfer mechanism between Nd{sup 3+} and Ho{sup 3+} was analyzed based on the absorption, emission and the energy level structures of Nd{sup 3+} and Ho{sup 3+} ions. In the present investigation, the energy transfer efficiency from Nd{sup 3+} to Ho{sup 3+} reached ∼50% under the excitation of 808 nm. This result indicates that Nd{sup 3+} ions can be potentially used as sensitizers for Ho{sup 3+} ions to stimulate the NIR emissions. Stimulated emission cross-section was evaluated for the prominent {sup 5}I{sub 7} → {sup 5}I{sub 8} transition of Ho{sup 3+} ion by using the Mc-Cumber theory. The spectroscopic characteristics of Nd{sup 3+}/Ho{sup 3+} co-doped oxyfluorosilicate glasses are found to be suitable as optical medium for mid infrared emission at ∼2.0 μm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Next-Generation Photon Sources for Grand Challenges in Science and Energy

The next generation of sustainable energy technologies will revolve around transformational new materials and chemical processes that convert energy efficiently among photons, electrons, and chemical bonds. New materials that tap sunlight, store electricity, or make fuel from splitting water or recycling carbon dioxide will need to be much smarter and more functional than today's commodity-based energy materials. To control and catalyze chemical reactions or to convert a solar photon to an electron requires coordination of multiple steps, each carried out by customized materials and interfaces with designed nanoscale structures. Such advanced materials are not found in nature the way we find fossil fuels; they must be designed and fabricated to exacting standards, using principles revealed by basic science. Success in this endeavor requires probing, and ultimately controlling, the interactions among photons, electrons, and chemical bonds on their natural length and time scales. Control science - the application of knowledge at the frontier of science to control phenomena and create new functionality - realized through the next generation of ultraviolet and X-ray photon sources, has the potential to be transformational for the life sciences and information technology, as well as for sustainable energy. Current synchrotron-based light sources have revolutionized macromolecular crystallography. The insights thus obtained are largely in the domain of static structure. The opportunity is for next generation light sources to extend these insights to the control of dynamic phenomena through ultrafast pump-probe experiments, time-resolved coherent imaging, and high-resolution spectroscopic imaging. Similarly, control of spin and charge degrees of freedom in complex functional materials has the potential not only to reveal the fundamental mechanisms of high-temperature superconductivity, but also to lay the foundation for future generations of information science. This report identifies two aspects of energy science in which next-generation ultraviolet and X-ray light sources will have the deepest and broadest impact: (1) The temporal evolution of electrons, spins, atoms, and chemical reactions, down to the femtosecond time scale. (2) Spectroscopic and structural imaging of nano objects (or nanoscale regions of inhomogeneous materials) with nanometer spatial resolution and ultimate spectral resolution. The dual advances of temporal and spatial resolution promised by fourth-generation light sources ideally match the challenges of control science. Femtosecond time resolution has opened completely new territory where atomic motion can be followed in real time and electronic excitations and decay processes can be followed over time. Coherent imaging with short-wavelength radiation will make it possible to access the nanometer length scale, where intrinsic quantum behavior becomes dominant. Performing spectroscopy on individual nanometer-scale objects rather than on conglomerates will eliminate the blurring of the energy levels induced by particle size and shape distributions and reveal the energetics of single functional units. Energy resolution limited only by the uncertainty relation is enabled by these advances. Current storage-ring-based light sources and their incremental enhancements cannot meet the need for femtosecond time resolution, nanometer spatial resolution, intrinsic energy resolution, full coherence over energy ranges up to hard X-rays, and peak brilliance required to enable the new science outlined in this report. In fact, the new, unexplored territory is so expansive that no single currently imagined light source technology can fulfill the whole potential. Both technological and economic challenges require resolution as we move forward. For example, femtosecond time resolution and high peak brilliance are required for following chemical reactions in real time, but lower peak brilliance and high repetition rate are needed to avoid radiation damage in high-resolution spatial imaging and to avoid space-charge broadening in photoelectron spectroscopy and microscopy. But light sources alone are not enough. The photons produced by next-generation light sources must be measured by state-of-the-art experiments installed at fully equipped end stations. Sophisticated detectors with unprecedented spatial, temporal, and spectral resolution must be designed and created. The theory of ultrafast phenomena that have never before been observed must be developed and implemented. Enormous data sets of diffracted signals in reciprocal space and across wide energy ranges must be collected and analyzed in real time so that they can guide the ongoing experiments. These experimental challenges - end stations, detectors, sophisticated experiments, theory, and data handling - must be planned and provided for as part of the photon source.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Personalized Energy Reduction Cyber-Physical System (PERCS): A gamified end-user platform for energy efficiency and demand response.

The mission of the Personalized Energy Reduction Cyber-physical System (PERCS) is to create new possibilities for improving building operating efficiency, enhancing grid reliability, avoiding costly power interruptions, and mitigating greenhouse gas emissions. PERCS proposes to achieve these outcomes by engaging building occupants as partners in a user-centered smart service platform. Using a non-intrusive load monitoring approach, PERCS uses a single sensing point in each home to capture smart electric meter data in real time. The household energy signal is disaggregated into individual load signatures of common appliances (e.g., air conditioners), yielding near real-time appliance-level energy information. Users interact with PERCS via a mobile phone platform that provides household- and appliance-level energy feedback, tailored recommendations, and a competitive game tied to energy use and behavioral changes. PERCS challenges traditional energy management approaches by directly engaging occupant as key elements in a technological system.

Sintov, Nicole↗

Avoided level crossings in very highly charged ions

In this paper, we report a systematic measurement of the (2p$-1\atop{1/2}$3d 3/2 ) J=1 and (2s$-1\atop{1/2}$3p 1/2 ) J=1 levels in 14 neonlike ions between Ba 46+ and Pb 72+ and document the effects of their avoided crossing near Z = 68. Strong mixing affects the oscillator strengths over a surprisingly wide range of atomic numbers and leads to the vanishing of one transition two atomic numbers below the crossing. The crossing voids the otherwise correct expectation that the (2p$-1\atop{1/2}$3d 3/2 ) J=1 level energy is only weakly affected by quantum electrodynamics (QED). For about 10 atomic numbers surrounding the crossing, its QED contributions are anomalously large, attaining almost equality to those affecting the (2s$-1\atop{1/2}$3p 1/2 ) J=1 level. As a result, the accuracy of energy level calculations appears compromised near the crossing.

74 ATOMIC AND MOLECULAR PHYSICS↗

EBSD of Rough Native CuInGaSe2 Thin-Films

The polycrystalline Cu (In, Ga) Se2, or CIGS, based thin-film materials system has long been studied for use in photovoltaic technologies, where its bandgap tunability, mechanical flexibility, and relatively low production costs are all appealing. Nonetheless, significant defect populations, which serve to reduce efficiency, create performance instabilities, and increase concerns about long-term reliability, have hindered wide-scale adoption. Prior work, including application of a scanning probe based deep level trap spectroscopy (SP-DLTS) defect mapping technique and scanning transmission electron microscope (STEM) based electron energy loss spectroscopy (EELS), has shown that the most detrimental defects, with energy level near mid-gap (thus serving as a carrier recombination center), are most likely caused by CuIn/Ga antisites and tend to cluster at or around certain grain boundaries [1,2]. However, the exact nature of these particular boundaries — their structures, chemistries, or even the relative misorientation of their associated grains — and their relation to this defect clustering and/or its formation is yet unknown. As such, electron backscatter diffraction (EBSD) orientation mapping, directly correlated with defect-sensitive techniques like SP-DLTS and/or STEM-EELS, could prove critical for providing the final missing links toward understanding the mechanisms behind these defects. Indeed, recent studies using correlative electron beam induced current (EBIC) with EBSD have been able to identify boundaries, and their relative misorientations, that possess detrimental electronic properties [3]. However, because EBIC is unable to resolve the defect energy levels, many questions are left unanswered. Furthermore, this study, and others like it, employed focused ion beam (FIB) milling to flatten the natively-rough CIGS [3-5], which may run the risk of changing the nature of any near-surface defect structures.

14 SOLAR ENERGY↗

Some Thermodynamic Considerations on the Physical and Quantum Nature of Space and Time

It is suggested that the Planck h = m(sub k)c Lambda(sub k) and the Boltzmann k = m(sub k)c nu(sub k)Constants have stochastic foundation. It is further suggested that a body of fluid at equilibrium is composed of a spectrum of molecular clusters (energy levels) the size of which are governed by the Maxwell-Boltzmann distribution function. Brownian motions are attributed to equilibrium between suspensions and molecular clusters. Atomic (molecular) transition between different size atomic- (molecular-) clusters (energy levels) is shown to result in emission/absorption of energy in accordance with Bohr's theory of atomic spectra. Physical space is identified as a tachyonic fluid that is Dirac's stochastic ether or de Broglie's hidden thermostat. Compressibility of physical space, in accordance with Planck's compressible ether, is shown to result in the Lorentz-Fitzgerald contraction, thus providing a causal explanation of relativistic effect in accordance with the perceptions of Poincare and Lorentz. The invariant Schrodinger equation is derived from the invariant Bernoulli equation for incompressible potential flow. Following Heisenberg a temporal uncertainty relation is introduced as Delta(nu(sub Beta)) Delta(Rho(sub Beta)) > = k.

Sohrab, Siavash H.↗

Nonlinear development of the two-plasmon decay instability in three dimensions

Most recent experiments on the excitation of the two plasmon-decay (TPD) instability involve a three-dimensional (3D) array of overlapping laser beams. Our recent two dimensional (2D) simulations suggested that Langmuir cavitation and collapse are important nonlinear saturation mechanisms for TPD. There are important quantitative differences in the Langmuir collapse process in 2D and 3D. To address these and other issues, we have developed a 3D Zakharov code. It has been applied to study the evolution of TPD from absolute instabilities (arising from 3D laser geometries) to the nonlinear state (J. Zhang et al., Phys. Rev. Lett. (submitted)). The present paper concentrates on the nonlinear saturated state excited by the collective action of two crossed laser beams with arbitrary polarizations. Remarkable agreement between 3D and 2D simulations is found for several averaged physical quantities when the beams are polarized in their common plane. As in the previous 2D simulations, we find: (a) the collective, initially convectively unstable triad modes dominate after a sub-picosecond burst, (b) Langmuir cavitation and collapse are important nonlinearities, and (c) that the statistics of intense cavitons are characteristic of a Gaussian random process. The 3D steady-state saturated Langmuir energy level is about 30% higher than in 2D. The auto-correlation functions of the Langmuir envelope field and of the low-frequency electron density field yield the spatial shape of the strongest collapsing cavitons which are 3D ellipsoids whose orientation depends on the laser polarizations. This tilting of the caviton's strongest electric field direction away from the normal to the target surface is a major new 3D result. This tilting may deflect the hot electron flux and thereby mitigate target preheat.

Vu, H. X.↗

A simple data-driven level finding method of many-electron atoms and heavy nuclei based on statistical outlier detection

Here, we report a simple and pure data-driven method to find new energy levels of quantum many-body systems only from observed line wavelengths. In our method, all the possible combinations are computed from known energy levels and wavelengths of unidentified lines. As each excited state exhibits many transition lines to different lower levels, the true levels should be reconstructed coincidentally from many level-line combinations, while the wrong combinations distribute randomly. Such a coincidence can be easily detected statistically. We demonstrate this statistical method by finding new levels for various atomic and nuclear systems from unidentified line lists available online.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

$\gamma$-Unstable Bohr Hamiltonian with sextic potential for odd-A nuclei

We report in this paper, odd-A nuclei in the vibrational to γ-soft transitional region are studied in the collective model, in which the odd-A system is described by the Bohr Hamiltonian with the quasi exactly solvable sextic β-part potential for the even-even core coupled with a single nucleon in a j = 3/2 orbit via the β-independent five-dimensional spin-orbit interaction and the total angular momentum degeneracy breaking term. To test the validity of the coupling scheme, we use the model to reproduce experimentally available level energies and B(E2) values of 187,189,191,193,195 Ir. It is clearly shown from both the level energies and the known B(E2) values for 191,193I r fitted that the model with the β-independent five-dimensional spin-orbit interaction and the total angular momentum degeneracy breaking term seems adequate to describe the low-lying level pattern and the structure of these odd-A nuclei.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charge Transport at Ti-Doped Hematite (001)/Aqueous Interfaces

Solid-state transport and electrochemical properties of Ti-doped hematite (001) epitaxial thin films (6.0, 8.3, and 16.6 at% Ti) were probed to achieve a better understanding of doped hematite for photoelectrochemical (PEC) applications. Room temperature resistivity measurements predict a resistivity minimum near 10 at% Ti doping, which can be rationalized as maximizing charge compensating Fe2+ concentration and Fe3+ electron accepting percolation pathways simultaneously. Temperature dependent resistivity data are consistent with small polaron hopping, revealing an activation energy that is Ti concentration dependent and commensurate with previously reported values (≈ 0.11 eV). In contact with inert electrolyte, linear Mott-Schottky data at various pH values indicate that there is predominantly a single donor for Ti-doped hematite at 6.0 at% Ti and 16.6 at% Ti concentrations. Two slope Mott-Schottky data at pH extremes indicate the presence of a second donor or surface state in the 8.3 at% Ti-doped film, with an energy level ≈ 0.7 eV below the Fermi level. Mott-Schottky plots indicate pH and Ti concentration dependent flatband potentials of -0.4 to -1.1 V vs. Ag/AgCl, commensurate with previously reported data. Flatband potentials exhibited super-Nernstian pH dependence ranging from -69.1 to -101.0 mV/pH. Carrier concentration data indicate that the Fermi energy of the Ti-doped system is Ti concentration dependent, with a minimum of 0.15 eV near 10 at% Ti. These energy level data allow us to construct an energy band diagram for Ti-doped hematite electrode/electrolyte interfaces, and to determine a Ti-doping concentration t

Environmental Molecular Sciences Laboratory↗

Bound-state solutions of the Dirac oscillator in an Aharonov-Bohm-Coulomb system

In this work, we study the (2+1)-dimensional Dirac oscillator in the presence of a homogeneous magnetic field in an Aharonov-Bohm-Coulomb system. To solve our system, we apply the left-handed and right-handed projection operators in the Dirac oscillator to obtain a biconfluent Heun equation. Next, we explicitly determine the energy spectrum for the bound states of the system and their exact dependence on the cyclotron frequency ω{sub c} and on the parameters Z and Φ{sub AB} that characterize the Aharonov-Bohm-Coulomb system. As a result, we observe that by adjusting the frequency of the Dirac oscillator to resonate with the cyclotron half-frequency the energy spectrum reduces to the rest energy of the particle. Also, we determine the exact eigenfunctions, angular frequencies, and energy levels of the Dirac oscillator for the ground state (n=1) and the first excited state (n=2). In this case, the energy levels do not depend on the homogeneous magnetic field, and the angular frequencies are real and positive quantities, increase quadratically with the energy and linearly with ω{sub c}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and photovoltaic properties of 2,6-bis(2-thienyl) benzobisazole and 4,8-bis(thienyl)-benzo[1,2- B :4,5- B' ]dithiophene copolymers

In an effort to design efficient low-cost polymers for use in organic photovoltaic cells the easily prepared donor–acceptor–donor triad of a either cis-benzobisoxazole, trans-benzobisoxazole or trans-benzobisthiazole flanked by two thiophene rings was combined with the electron-rich 4,8-bis(5-(2-ethylhexyl)-thien-2-yl)-benzo[1,2-b:4,5-b']dithiophene. The electrochemical, optical, morphological, charge transport, and photovoltaic properties of the resulting terpolymers were investigated. Although the polymers differed in the arrangement and/or nature of the chalcogens, they all had similar highest occupied molecular orbital energy levels (-5.2 to -5.3 eV) and optical band gaps (2.1–2.2 eV). However, the lowest unoccupied molecular orbital energy levels ranged from -3.1 to -3.5 eV. When the polymers were used as electron donors in bulk heterojunction photovoltaic devices with PC71BM ([6,6]-phenyl C71-butyric acid methyl ester) as the acceptor, the trans-benzobisoxazole polymer had the best performance with a power conversion efficiency of 2.8%.

36 MATERIALS SCIENCE↗

∼2 μm emission properties and non-radiative processes of Tm{sup 3+} in germanate glass

In this paper, 80GeO{sub 2}-8Ga{sub 2}O{sub 3}-10BaO-2Nb{sub 2}O{sub 5}-6PbO (in mol%) glass samples with different Tm{sub 2}O{sub 3} concentrations (0, 0.5, 0.75, 1, 1.25, and 1.5 mol. %) were prepared by traditional melt-quenching method. According to the measurement of thermal properties of the host glass, the glass transition temperature is 596.7 °C and no crystallization peak is observed. Judd–Ofelt parameters Ω{sub t} (t = 2, 4, 6) and fluorescent lifetimes were obtained by Judd-Ofelt theory. The similar values of Judd–Ofelt parameters and the full-width at half-maximums of ∼1800 nm indicate the local environment of Tm{sup 3+} changes little with increment of Tm{sub 2}O{sub 3} concentrations. Maximum stimulated emission cross-section of ∼1800 nm is 6.22 × 10{sup −21} cm{sup 2} as calculated by Fuchtbauer–Ladenburg formula. Energy migration among Tm{sup 3+} ions was analyzed by the extended overlap integral method. The non-radiative transition rates between mainly energy levels of Tm{sup 3+} were calculated. Non-radiative transition rate of {sup 3}F{sub 4} energy level caused by OH was analyzed by rate equation and deduced by fitting the fluorescence decay curve.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A quantum model for bending vibrations and thermodynamic properties of C3.

The investigation reported was conducted to clarify the thermodynamic properties of C3 by further developing the limit to the partition function suggested by Strauss and Thiele (1967). A quantum solution for the energy levels of a quadratically perturbed square well potential is presented and the consistency of this limit with observed energy levels is established. In the process a more complete physical picture of the bending C3 molecules emerges. The values of entropy deduced from various measurements of graphite pressure are compared with this limit, and the thermodynamic properties predicted for the limiting case are evaluated.

Hansen, C. F.↗

Ames S-32 O-16 O-18 Line List for High-Resolution Experimental IR Analysis

By comparing to the most recent experimental data and spectra of the SO2 628 ν1/ν3 bands (see Ulenikov et al., JQSRT 168 (2016) 29-39), this study illustrates the reliability and accuracy of the Ames-296K SO2 line list, which is accurate enough to facilitate such high-resolution spectroscopic analysis. The SO2 628 IR line list is computed on a recently improved potential energy surface (PES) refinement, denoted Ames-Pre2, and the published purely ab initio CCSD(T)/aug-cc-pVQZ dipole moment surface. Progress has been made in both energy level convergence and rovibrational quantum number assignments agreeing with laboratory analysis models. The accuracy of the computed 628 energy levels and line list is similar to what has been achieved and reported for SO2 626 and 646, i.e. 0.01-0.03 cm(exp −1) for bands up to 5500 cm(exp −1). During the comparison, we found some discrepancies in addition to overall good agreements. The three-IR-list based feature-by-feature analysis in a 0.25 cm(exp −1) spectral window clearly demonstrates the power of the current Ames line lists with new assignments, correction of some errors, and intensity contributions from varied sources including other isotopologues. We are inclined to attribute part of detected discrepancies to an incomplete experimental analysis and missing intensity in the model. With complete line position, intensity, and rovibrational quantum numbers determined at 296 K, spectroscopic analysis is significantly facilitated especially for a spectral range exhibiting such an unusually high density of lines. The computed 628 rovibrational levels and line list are accurate enough to provide alternatives for the missing bands or suspicious assignments, as well as helpful to identify these isotopologues in various celestial environments. The next step will be to revisit the SO2 828 and 646 spectral analyses.

Sulfur dioxide↗

Study of electronic properties in proton- and electron-irradiated GaAlAs and GaAs solar cell materials

Diagnostical measurement techniques such as dark I-V, C-V, the thermally insulated capacitance, and the deep level transient spectroscopy methods were employed to study defect properties in the proton-irradiated n-GaAs materials. Defect energy levels, thermal emission rates, and capture cross sections of electrons as well as trap densities were deduced from these measurements and the results are presented. Correlations between the measured defect parameters and the dark I-V characteristics of the n-GaAs Schottky barrier diodes are also discussed. Defect energy levels (i.e., electron traps) determined are also compared with published data in order to identify their physical origins.

Li, S. S.↗