Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Elevation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

9-cis-retinoic acid elevates MRP3 expression by inhibiting sumoylation of RXRα to alleviate cholestatic liver injury

Highlights: • 9-cis-retinoic acid alleviates BDL induced liver injury and may be a new strategy to relief cholestasis. • 9-cis-retinoic acid elevates MRP3 expression by the inhibition of RXRα sumoylation in cholestatic disorders. • Inhibition of RXRα sumoylation promotes it cytoplasmic distribution and weakens the interaction of RXRα and RARα. Vitamin A and its metabolites has been found to be protective against cholestatic liver injury, but the exact underlying mechanisms involved in cholestatic liver injury remain unclear. The objective of this study was to determine the function and mechanisms of 9-cis-retinoic acid, the metabolite of vitamin A, in cholestatic liver injury.

60 APPLIED LIFE SCIENCES↗

Lung tissue destruction by proteinase 3 and cathepsin G mediated elastin degradation is elevated in chronic obstructive pulmonary disease

Highlights: • Identification of elastin fragments specifically generated by cathepsin G (CG) and proteinase 3 (PR3) respectively. • Development of the two assays EL-CG and ELP-3 which are specific for the CG or PR3 degraded elastin neo-epitopes. • Significant higher concentrations of EL-CG and ELP-3 in patients diagnosed with COPD compared to healthy subjects. Chronic obstructive pulmonary disease (COPD) is characterized by high levels of protease activity leading to degradation of elastin followed by loss of elasticity of the lung and the development of emphysema. Elastin is an essential structural component of the lung parenchyma to support the expansion and recoil of the alveoli during breathing. The lung extracellular matrix is vulnerable to pathological structural changes upon upregulation of serine proteases, including cathepsin G (CG) and proteinase 3 (PR3). In this study, we explored the diagnostic features of elastin neo-epitopes generated by CG and PR3. Two novel competitive enzyme-linked immunosorbent assays (ELISA) measuring CG and PR3 generated elastin fragments (EL-CG and ELP-3 respectively) were developed for assessment in serum. Both assays were technically robust and biologically validated in serum from patients with COPD. Serological levels of both elastin fragments were significantly elevated in patients with COPD compared to healthy controls. These data suggest that EL-CG and ELP-3 may serve as plausible biologic markers of destructive changes in COPD.

60 APPLIED LIFE SCIENCES↗

Evaluation of pore structures and cracking in cement paste exposed to elevated temperatures by X-ray computed tomography

When cement-based materials are exposed to the high temperatures induced by fire, which can rapidly cause temperatures of over 1000 °C, the changes in pore structure and density prevail. In the present study, mortar specimens were subjected to a series of increasing temperatures to explore the temperature-dependent evolution of internal pore structure. High-performance X-ray computed tomography (CT) was used to observe the evolution of temperature-induced discontinuities at the sub-millimeter level. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to investigate the cause of physical changes in the heated mortar specimens. Results exhibit the changes in pore structure caused by elevated temperatures, and thermally induced fractures. We discuss the progressive formation of thermally induced fracture networks, which is a prerequisite for spalling failure of cement-based materials by fire, based on visual observations of the 3D internal structures revealed by X-ray CT.

36 MATERIALS SCIENCE↗

Effect of curing conditions on the dimensional and thermal stability of calcium phosphate cement for elevated temperature applications

Calcium phosphate cements (CPCs) are attractive materials for elevated temperature applications, like moulds to process thermoplastics up to 300 °C. The CPC resulting from the reaction of wollastonite with phosphoric acid cured at room temperature however contains hydrated phases like brushite, and is thus not stable when exposed to temperatures above 200 °C. A non-contact method based on digital image correlation demonstrated that isothermal curing at 60 °C reduces the thermal shrinkage up to 300 °C by 25%. This curing method results in the direct formation of the more stable monetite in a shorter curing time. The correlated results of TGA, pH of the filtration water, and DSC analysis on partially cured material indicate this. XRD diffractograms and SEM images in combination with EDX show the evolution of the transformation of wollastonite into monetite, and the structure and morphology of the formed material.

36 MATERIALS SCIENCE↗

Nano-chemo-mechanical signature of conventional oil-well cement systems: Effects of elevated temperature and curing time

With ever more challenging (T,p) environments for cementing applications in oil and gas wells, there is a need to identify the fundamental mechanisms of fracture resistant oil well cements. We report results from a multi-technique investigation of behavior and properties of API class G cement and silica-enriched cement systems subjected to hydrothermal curing from 30 °C to 200 °C; including electron probe microanalysis, X-ray diffraction, thermogravimetry analysis, electron microscopy, neutron scattering (SANS), and fracture scratch testing. The results provide a new insight into the link between system chemistry, micro-texture and micro-fracture toughness. We suggest that the strong correlation found between chemically modulated specific surface and fracture resistance can explain the drop in fracture properties of neat oil-well cements at elevated temperatures; the fracture property enhancement in silica-rich cement systems, between 110° and 175 °C; and the drop in fracture properties of such systems through prolonged curing over 1 year at 200 °C.

36 MATERIALS SCIENCE↗

Modelling of transport processes in concrete exposed to elevated temperatures – An alternative formulation for sorption isotherms

There is a significant need to understand, analyse and assess moisture transport in cementitious materials exposed to elevated temperatures in order to confidently predict the behaviour and ultimately the development of damage in safety critical applications such as nuclear reactor vessels, structures exposed to fire and well bore grouts. In view of this need a rigorous and robust formulation to describe water retention curves (sorption isotherms) as a function of temperature based on the evolution of physical parameters is presented. The model formulation is successfully validated against independent sets of experimental data up to temperatures of 80 °C. It is then further validated under isothermal drying conditions and then high temperature conditions through the numerical reproduction of laboratory experiments following implementation in a fully coupled hygro-thermo-mechanical finite element model. The new formulation is found to work well under a variety of conditions in a variety of cementitious material types.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Thermal energy storage in concrete: Review, testing, and simulation of thermal properties at relevant ranges of elevated temperature

This study examines the thermal performance of concrete used for thermal energy storage (TES) applications. The influence of concrete constituents (aggregates, cementitious materials, and fibers) on the thermal conductivity and specific heat are summarized based on literature and via experimentation at elevated temperatures. It is indicated that concrete with siliceous aggregate, low water/cement ratios, and steel fibers produces better overall thermal properties. The results of literature review and laboratory testing are used for numerical simulation to evaluate the impact of concrete thermal property variability on TES capabilities. The TES module consists of the heat exchanger and surrounding concrete as the storage media. Both idealized cases without heat loss and realistic cases with insulation and heat losses are considered. Furthermore, the result shows that conventional concrete mixes can be tailored to decrease the module charge/discharge durations and increase the amount of thermal energy storage.

25 ENERGY STORAGE↗

Modeling char oxidation behavior under Zone II burning conditions at elevated pressures

For accurate modeling of the coal combustion process at elevated pressures, account must be made for variations in char-particle structure. As pressure is increased, particle swelling increases during the devolatilization of certain bituminous coals, yielding a variety of char-particle structures, from uniform high-density particles to thin-walled non-uniform low-density particles having large internal void volumes. Since under Zone II burning conditions the char conversion rate depends upon the accessibility of the internal surfaces, the char structure plays a key role in determining particle burnout times. In our approach to characterize the impact of char structure on particle burning rates, effectiveness factors appropriate for thin-walled cenospherical particles and thick-walled particles having a few large cavities are defined and related to the effectiveness factor for uniform high-density particles that have no large voids, only a random distribution of pores having a mean pore size in the sub-micron range. For the uniform case, the Thiele modulus approach is used to account for Zone 11 type burning in which internal burning is limited by the combined effects of pore diffusion and the intrinsic chemical reactivity of the carbonaceous material. In the paper, the impact of having a variety of char structures in a mix of particles burning under Zone II burning conditions is demonstrated.

01 COAL, LIGNITE, AND PEAT↗

The autoignition of C{sub 8}H{sub 10} aromatics at moderate temperatures and elevated pressures

The autoignition of C{sub 8}H{sub 10} aromatic/air mixtures (ortho-xylene, meta-xylene, para-xylene, and ethylbenzene in air) has been studied in a shock tube at temperatures of 941-1408 K, pressures of 9-45 atm, and equivalence ratios of {phi}=1.0 and 0.5. Ignition times were determined using electronically excited OH emission and pressure measurements. The measurements illustrate the differences in reactivity for the C{sub 8}H{sub 10} aromatics under the studied conditions. Ethylbenzene was by far the most reactive C{sub 8}H{sub 10} aromatic with ignition times a factor of two to three shorter than the xylenes. The xylene isomers exhibited ignition times that were similar, with o-xylene the most reactive, p-xylene the least reactive, and m-xylene just slightly more reactive than p-xylene. The p-xylene ignition times are almost identical to previous measurements for toluene at the same conditions. The differences in reactivity can be attributed to the C-H and C-C bond strengths in the alkyl side chains and the proximity of the methyl groups in the xylenes. These results represent the first ignition measurements for C{sub 8}H{sub 10} aromatics at the elevated-pressure moderate-temperature conditions studied, providing needed targets for kinetic modeling at engine-relevant conditions. Kinetic modeling illustrates the importance of the methylbenzyl + HO{sub 2} reaction and indicates further study of this reaction is warranted. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Autoignition of n-decane under elevated pressure and low-to-intermediate temperature conditions

An experimental investigation of the autoignition for various n-decane/oxidizer mixtures is conducted using a rapid compression machine, in the range of equivalence ratios of {phi}=0.5-2.2, dilution molar ratios of N{sub 2}/(O{sub 2} + N{sub 2}) = 0.79-0.95, compressed gas pressures of P{sub C}=7-30 bar, and compressed gas temperatures of T{sub C}=635-770 K. The current experiments span a temperature range not fully investigated in previous autoignition studies on n-decane. Two-stage ignition, characteristic of large hydrocarbons, is observed over the entire range of conditions investigated, as demonstrated in the plots of raw experimental pressure traces. In addition, experimental results reveal the sensitivity of the first-stage and total ignition delays to variations in fuel and oxygen mole fractions, pressure, and temperature. Predictability of two kinetic mechanisms is compared against the present data. Discrepancies are noted and discussed, which are of direct relevance for further improvement of kinetic models of n-decane at conditions of elevated pressures and low-to-intermediate temperatures. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The autoignition of iso-cetane at high to moderate temperatures and elevated pressures: Shock tube experiments and kinetic modeling

Iso-cetane (2,2,4,4,6,8,8-heptamethylnonane, C{sub 16}H{sub 34}) is a highly branched alkane reference compound for determining cetane ratings. It is also a candidate branched alkane representative in surrogate mixtures for diesel and jet fuels. Here new experiments and kinetic modeling results are presented for the autoignition of iso-cetane at elevated temperatures and pressures relevant to combustion in internal combustion engines. Ignition delay time measurements were made in reflected shock experiments in a heated shock tube for {phi} = 0.5, 1.0, and 1.5 iso-cetane/air mixtures at temperatures ranging from 879 to 1347 K and pressures from 8 to 47 atm. Ignition delay times were measured using electronically excited OH emission, monitored through the shock tube end wall, and piezoelectric pressure transducer measurements, made at side wall locations. A new kinetic mechanism for the description of the oxidation of iso-cetane is presented that is developed based on a previous mechanism for iso-octane. Computed results from the mechanism are found in good agreement with the experimental measurements. To our knowledge, the ignition time measurements for iso-cetane presented here are the first of their kind. (author)

33 ADVANCED PROPULSION SYSTEMS↗

An experimental and kinetic modeling study of the autoignition of {alpha}-methylnaphthalene/air and {alpha}-methylnaphthalene/n-decane/air mixtures at elevated pressures

The autoignition of {alpha}-methylnaphthalene (AMN), the bicyclic aromatic reference compound for the cetane number (CN), and AMN/n-decane blends, potential diesel surrogate mixtures, was studied at elevated pressures for fuel/air mixtures in a heated high-pressure shock tube. Additionally, a comprehensive kinetic mechanism was developed to describe the oxidation of AMN and AMN/n-decane blends. Ignition delay times were measured in reflected shock experiments for {phi} = 0.5, 1.0, and 1.5 AMN/air mixtures (CN = 0) for 1032-1445 K and 8-45 bar and for {phi} = 1.0 30%-molar AMN/70%-molar n-decane/air (CN = 58) and 70%-molar AMN/30%-molar n-decane/air mixtures (CN = 28) for 848-1349 K and 14-62 bar. Kinetic simulations, based on the comprehensive AMN/n-decane mechanism, are in good agreement with measured ignition times, illustrating the emerging capability of comprehensive mechanisms for describing high molecular weight transportation fuels. Sensitivity and reaction flux analysis indicate the importance of reactions involving resonance stabilized phenylbenzyl radicals, the formation of which by H-atom abstractions with OH radicals has an important inhibiting effect on ignition. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Autoignited laminar lifted flames of methane, ethylene, ethane, and n-butane jets in coflow air with elevated temperature

The autoignition characteristics of laminar lifted flames of methane, ethylene, ethane, and n-butane fuels have been investigated experimentally in coflow air with elevated temperature over 800 K. The lifted flames were categorized into three regimes depending on the initial temperature and fuel mole fraction: (1) non-autoignited lifted flame, (2) autoignited lifted flame with tribrachial (or triple) edge, and (3) autoignited lifted flame with mild combustion. For the non-autoignited lifted flames at relatively low temperature, the existence of lifted flame depended on the Schmidt number of fuel, such that only the fuels with Sc > 1 exhibited stationary lifted flames. The balance mechanism between the propagation speed of tribrachial flame and local flow velocity stabilized the lifted flames. At relatively high initial temperatures, either autoignited lifted flames having tribrachial edge or autoignited lifted flames with mild combustion existed regardless of the Schmidt number of fuel. The adiabatic ignition delay time played a crucial role for the stabilization of autoignited flames. Especially, heat loss during the ignition process should be accounted for, such that the characteristic convection time, defined by the autoignition height divided by jet velocity was correlated well with the square of the adiabatic ignition delay time for the critical autoignition conditions. The liftoff height was also correlated well with the square of the adiabatic ignition delay time. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Agglomeration and reactivity of nanoparticles of SiO 2 , TiO 2 , Al 2 O 3 , Fe 2 O 3 , and clays in cement pastes and effects on compressive strength at ambient and elevated temperatures

We report the agglomeration state of SiO 2 , TiO 2 , Al 2 O 3 , Fe 2 O 3 , bentonite, and halloysite nanoparticles (NPs) in solutions, including simulated cement environments, and their agglomeration and reactivity within the cement paste were evaluated. In water, all NPs formed agglomerates, while sonication and addition of polycarboxylate-based, high range water reducer generally decreased the agglomerate size. Agglomeration of NPs was observed in the chemical environment of hydrating cement paste. The bridging role of Ca 2+ , charge balancing, screening by K + , and pH were identified as factors controlling agglomeration. TiO 2 , bentonite, and halloysite NPs enhanced the cement paste residual compressive strength after exposure to elevated temperature.

36 MATERIALS SCIENCE↗

Elevated carbon dioxide does not offset loss of soil carbon from a corn-soybean agroecosystem.

The potential for storing additional C in U.S. Corn Belt soils - to offset rising atmospheric [CO{sub 2}] - is large. Long-term cultivation has depleted substantial soil organic matter (SOM) stocks that once existed in the region's native ecosystems. In central Illinois, free-air CO{sub 2} enrichment technology was used to investigate the effects of elevated [CO{sub 2}] on SOM pools in a conservation tilled corn-soybean rotation. After 5 and 6 y of CO{sub 2} enrichment, we investigated the distribution of C and N among soil fractions with varying ability to protect SOM from rapid decomposition. None of the isolated C or N pools, or bulk-soil C or N, was affected by CO{sub 2} treatment. However, the site has lost soil C and N, largely from unprotected pools, regardless of CO{sub 2} treatment since the experiment began. These findings suggest management practices have affected soil C and N stocks and dynamics more than the increased inputs from CO{sub 2}-stimulated photosynthesis. Soil carbon from microaggregate-protected and unprotected fractions decreased in a conservation tilled corn-soybean rotation despite increases in primary production from exposure to atmospheric CO{sub 2} enrichment.

54 ENVIRONMENTAL SCIENCES↗

Elevated manganese and cognitive performance in school-aged children and their mothers

Background: Growing evidence suggests that excess manganese (Mn) in children is associated with neurobehavioral impairments. In Brazil, elevated hair Mn concentrations were reported in children living near a ferro-manganese alloy plant. Objectives: We investigated these children's and caregivers' cognitive function in relation to bioindicators of Mn exposure. Methods: In this cross-sectional study, the WISC-III was administered to 83 children aged between 6 and 12 years; the Raven Progressive Matrix was administered to the primary caregivers (94% mothers), who likewise responded to a questionnaire on socio demographics and birth history. Mn in hair (MnH) and blood (MnB) and blood lead (PbB) were measured by graphite furnace atomic absorption spectrometry (GFAAS). Results: Children's mean MnB and MnH were 8.2 {mu}g/L (2.7-23.4) and 5.83 {mu}g/g (0.1-86.68), respectively. Mean maternal MnH was 3.50 {mu}g/g (0.10-77.45) and correlated to children's MnH (rho=0.294, p=0.010). Children's MnH was negatively related to Full-Scale Intelligence Quotient (IQ) and Verbal IQ; {beta} coefficients for MnH were -5.78 (95% CI -10.71 to -0.21) and -6.72 (-11.81 to -0.63), adjusted for maternal education and nutritional status. Maternal MnH was negatively associated with performance on the Raven's ({beta}=-2.69, 95% CI -5.43 to 0.05), adjusted for education years, family income and age. Conclusions: These findings confirm that high MnH in children is associated with poorer cognitive performance, especially in the verbal domain. Primary caregiver's IQ is likewise associated to Mn exposure, suggesting that, in this situation, children's cognition may be affected directly and indirectly by Mn exposure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elevated blood pressure and household solid fuel use in premenopausal women: Analysis of 12 Demographic and Health Surveys (DHS) from 10 countries

Highlights: • We obtained data from 12 standard DHS conducted in ten countries. • Data were nationally representative and internationally comparable. • We assessed the link between household cooking fuel and BP in women aged 15-49 years. • Dirty fuel use was linked with raised BP and hypertension, mainly in rural women. • Using cleaner fuels may reduce hypertension related morbidity and mortality in L/MIC. Approximately three billion people are exposed to household air pollution (HAP) from solid fuel cookstoves. Studies from single settings have linked HAP with elevated blood pressure (BP), but no evidence exists from multi-country analyses.

54 ENVIRONMENTAL SCIENCES↗

Laboratory scale studies of Pd/{gamma}-Al{sub 2}O{sub 3} sorbents for the removal of trace contaminants from coal-derived fuel gas at elevated temperatures

The Integrated Gasification Combined Cycle (IGCC) is a promising technology for the use of coal in a clean and efficient manner. In order to maintain the overall efficiency of the IGCC process, it is necessary to clean the fuel gas of contaminants (sulfur, trace compounds) at warm (150–540 °C) to hot (>540 °C) temperatures. Current technologies for trace contaminant (such as mercury) removal, primarily activated carbon based sorbents, begin to lose effectiveness above 100 °C, creating the need to develop sorbents effective at elevated temperatures. As trace elements are of particular environmental concern, previous work by this group has focused on the development of a Pd/γ-Al{sub 2}O{sub 3} sorbent for Hg removal. This paper extends the research to Se (as hydrogen selenide, H{sub 2}Se), As (as arsine, AsH{sub 3}), and P (as phosphine, PH{sub 3}) which thermodynamic studies indicate are present as gaseous species under gasification conditions. Experiments performed under ambient conditions in He on 20 wt.% Pd/γ-Al{sub 2}O{sub 3} indicate the sorbent can remove the target contaminants. Further work is performed using a 5 wt.% Pd/γ-Al{sub 2}O{sub 3} sorbent in a simulated fuel gas (H{sub 2}, CO, CO{sub 2}, N{sub 2} and H{sub 2}S) in both single and multiple contaminant atmospheres to gauge sorbent performance characteristics. The impact of H{sub 2}O, Hg and temperature on sorbent performance is explored.

Arsine↗