Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Ultraviolet photoelectron spectroscopic study of boron adsorption and surface segregation on Si(111)

The adsorption and surface segregation behavior of elemental boron (B) deposited on Si(111) have been studied by ultraviolet photoelectron spectroscopy and accompanying reflection high-energy electron diffraction as a function of the B coverage (c{sub B}) and annealing temperature (T). Our results clearly demonstrate an effective incorporation of B into subsurface sites at T > 800 K and formation of a well-ordered ({radical}(3)x{radical}(3))R30 deg. surface superstructure. Thereby, a critical c{sub B} of about 0.6 monolayers (ML) was determined for different conditions to prevent surface defects resulting from Si dangling bonds, which appear as surface states at 0.4 eV below the Fermi level. Annealing of the defect-free ({radical}(3)x{radical}(3))R30 deg. superstructure covered by several MLs Si at T{>=} 1040 K results in a renewal of the perfect B-induced Si surface structure, even after several deposition and annealing cycles. This indicates a dominance of B surface segregation over bulk diffusion. Significant B bulk diffusion commences only above 1100 K. Differences were found for spectra obtained for the B-induced surface structures formed after deposition and surface segregation, respectively. An additional surface state appeared at 2.1 eV below the Fermi level after deposition of 0.6 ML B. The state could be attributed to boron-boron interaction due to the presence of small clusters at the surface. This surface state did not disappear after high-T annealing and was not observed for lower c{sub B} and after B surface segregation, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physics of laser-driven plasma-based electron accelerators

Laser-driven plasma-based accelerators, which are capable of supporting fields in excess of 100 GV/m, are reviewed. This includes the laser wakefield accelerator, the plasma beat wave accelerator, the self-modulated laser wakefield accelerator, plasma waves driven by multiple laser pulses, and highly nonlinear regimes. The properties of linear and nonlinear plasma waves are discussed, as well as electron acceleration in plasma waves. Methods for injecting and trapping plasma electrons in plasma waves are also discussed. Limits to the electron energy gain are summarized, including laser pulse diffraction, electron dephasing, laser pulse energy depletion, and beam loading limitations. The basic physics of laser pulse evolution in underdense plasmas is also reviewed. This includes the propagation, self-focusing, and guiding of laser pulses in uniform plasmas and with preformed density channels. Instabilities relevant to intense short-pulse laser-plasma interactions, such as Raman, self-modulation, and hose instabilities, are discussed. Experiments demonstrating key physics, such as the production of high-quality electron bunches at energies of 0.1-1 GeV, are summarized.

43 PARTICLE ACCELERATORS↗

Real-time scanning tunneling microscopy observations of the oxidation of a Ti/Pt(111)-(2x2) surface alloy using O{sub 2} and NO{sub 2}

The authors have used scanning tunneling microscopy (STM), low energy electron diffraction (LEED), and Auger electron spectroscopy (AES) to study the nascent oxidation of an ordered Ti/Pt(111)-(2x2) surface alloy exposed to oxygen (O{sub 2}) or nitrogen dioxide (NO{sub 2}) under ultrahigh vacuum conditions. The Ti/Pt(111)-(2x2) surface alloy was formed by depositing an ultrathin Ti film on Pt(111) and annealing to 1050 K. This produces an alloy film in which the surface layer is pure Pt and the second layer contains Ti atoms in a (2x2) structure, which causes the pattern observed by STM and LEED. Real-time imaging of the surface at 300 K was carried out by continuously scanning with the STM while either O{sub 2} or NO{sub 2} was introduced into the chamber. O{sub 2} exposures did not cause any gross structural changes; however oxygen was detected on the surface afterward using AES. Annealing this surface to 950 K resulted in the formation of an ordered TiO{sub x} overlayer as characterized by both LEED and STM. In contrast, NO{sub 2} exposures caused definite changes in the surface morphology at 300 K, and the root-mean-square roughness increased from 3.5 to 7.1 A after a large NO{sub 2} exposure. No ordered structures were produced by this treatment, but annealing the surface to 950 K formed an ordered pattern in LEED and corresponding clear, well-resolved structures in STM images. We account for these observations on the disruption or reconstruction of the Ti/Pt(111)-(2x2) surface alloy by arguments recalling that Ti oxidation is an activated process. The energetic barrier to TiO{sub x} formation cannot be surmounted at room temperature at low oxygen coverages, and annealing the surface was necessary to initiate this reaction. However, the higher oxygen coverages obtained using the more reactive oxidant NO{sub 2} lowered the chemical potential in the system sufficiently to overcome the activation barrier to extract Ti from the alloy at room temperature and form a disordered TiO{sub x} film. These results illustrate the importance of the surface oxygen coverage in nucleating the room temperature oxidation of the Pt-Ti surface alloys and further show the ability of NO{sub 2} in ultrahigh vacuum studies for probing the chemistry that will occur at higher O{sub 2} pressure.

36 MATERIALS SCIENCE↗

Band gap of epitaxial in-plane-dimerized single-phase NbO{sub 2} films

We demonstrate the epitaxial growth of high quality crystalline phase-pure NbO{sub 2} films on various oxide substrates using molecular beam epitaxy. Using a combination of reflection high-energy electron diffraction and x-ray diffraction we show that the films grow with the pseudo-rutile (100) orientation out of plane. The band gap of the NbO{sub 2} films is determined to be at least 1.0 eV using a combination of x-ray photoelectron spectroscopy and inverse photoelectron spectroscopy, in conjunction with hybrid density functional calculations of the density of states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Developing Laser-Induced Re-Collision Electron Self-Diffraction (Brief summary of accomplishments)

Our principal goal was the experimental demonstration of Laser-Induced Electron Diffraction (LIED). Key steps along the development of this experimental technique have been accomplished and reported in the publications listed in this brief report. We started with measuring 3D electron momenta spectra in aligned nitrogen and oxygen molecules. Chakra Maharjan (Ph.D. student of Lew Cocke) was a lead researcher on this project. Although Chakra succeeded in obtaining those spectra, we were scooped by the publication of identical results in Science by the NRC Ottawa group. Our results were never published as a refereed article, but became a part of Chakra's Ph.D. dissertation. That Science paper was the first experimental demonstration of Laser-Induced Electron Diffraction (LIED). Chakra also worked on wavelength dependence of 3D ATI spectra of atoms and molecules using tunable OPA pulses. Another Ph.D. student, Maia Magrakvelidze (her GRA was funded by the grant), started working on COLTRIMS experiments using OPA pulses (1800 nm wavelength). After some initial experiments it became apparent that COLTRIMS did not yield sufficient count rates of electrons in the high-energy part of the spectrum to see diffraction signatures with acceptable statistics (unfavorable scaling of the electron yield with laser wavelength was partly to blame). Nevertheless, Maia managed to use COLTRIMS and OPA to measure the angular dependence of the tunneling ionization rate in D 2 molecules. Following the initial trial experiments, the decision was made to switch from COLTRIMS to VMI in order to increase the count rates by a factor of ~100, which may have given us a chance to see LIED. Research Associate Dr. Sankar De (his salary was funded by the grant), in collaboration with Matthias Kling's group (then at MPQ Garching), proceeded to design a special multi-electrode VMI spectrometer for capturing high-energy ATI electrons and to install it in place of COLTRIMS inside our experimental chamber. That apparatus was later used for the first demonstration of field-free orientation in CO using two-color laser pulses as well as for a series of other experiments, such as pump-probe studies of molecular dynamics with few-cycle laser pulses, control of electron localization in dissociating hydrogen molecules using two-color laser pulses, and ATI spectra of Xe ionized by two-color laser pulses. In parallel, Dipanwita Ray (Ph.D. student of Lew Cocke) worked on measuring angle-resolved ATI spectra of noble gases using a stereo-ATI phasemeter as a TOF electron spectrometer. She observed the angular diffraction structures in 3D ATI spectra of Ar, Kr and Xe, which were interpreted in terms of the Quantitative Rescattering theory newly developed by C.D. Lin. We also attempted to use a much more powerful OPA (five times more energy per pulse than the one we had at JRML) available at the Advanced Laser Light Source (ALLS) in Montreal to observe LIED. Two visits to ALLS by the PI, Igor Litvinyuk, and one visit by the PI's Ph.D. student (Irina Bocharova) were funded by the grant. Though we failed to observe LIED (the repetition rate of the ALLS OPA was too low at only 100 Hz), this international collaboration resulted in several publications on other related subjects, such as the wavelength dependence of laser Coulomb explosion of hydrogen, the wavelength dependence of non-sequential double ionization of neon and argon, the demonstration of charge-resonance enhanced ionization in CO 2 , and the study of non-elastic scattering processes in H 2 }. Theoretical efforts to account for the hydrogen Coulomb explosion experiment resulted in another paper by Maia Magrakvelidze as lead author. Although for various reasons we failed to achieve our main goal of observing LIED, we salute the recent success in this endeavor by Lou DiMauro's group (with theoretical support from our KSU colleague C.D. Lin) published in Nature, which validates our approach.

08 HYDROGEN↗

Emerging hierarchical dislocation structures: Insights from scanning electron microscopy-electron backscatter diffraction in situ tensile testing and multifractal analysis

Understanding the evolution of dislocation structures during plastic deformation is critical for predicting the mechanical performance of metallic materials. In this work, we applied in situ scanning electron microscopy/electron backscatter diffraction tensile testing combined with multifractal (MF) analysis to assess deformation-induced dislocation structure evolution in solution-annealed 304 L stainless steel, both in its as-received and neutron-irradiated states (5.4 displacements per atom). The analysis of kernel average misorientation patterns revealed the formation of hierarchical dislocation arrangements that exhibit clear MF scaling behavior. Despite pronounced visual differences between nonirradiated and irradiated specimens—most notably, the appearance of dislocation channels after irradiation—the singularity spectra suggest that both conditions give rise to similar underlying hierarchical structures. MF analysis provides a quantitative measure of the spatial complexity and self-organization of dislocation patterns, highlighting the accelerated emergence and evolution of the dislocation structures in irradiated polycrystalline materials, as well as the limitation of their spatial extent. The findings indicate that irradiation not only modifies microstructure but also alters correlation-driven dislocation organization. More generally, they demonstrate that MF analysis is a powerful tool for probing mesoscale deformation mechanisms.

Dislocation structures↗

The evolution of precipitate crystal structures in an Al-Mg-Si(-Cu) alloy studied by a combined HAADF-STEM and SPED approach

Highlights: • Scanning electron diffraction and machine learning complement lattice imaging • Developed approach gives increased objectivity in precipitate phase analysis • Precipitate phase fractions and solute content obtained with superior statistics • 0.01 at.% Cu changes the Al-Mg-Si system precipitation during overageing • Q’-phase eventually dominates precipitate structures and shows varying Cu-occupancy - Abstract: This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron microscopy combined with a novel scanning precession electron diffraction approach, which includes machine learning. The combination of techniques enabled evaluation of the atomic arrangement within individual precipitates, as well as an improved estimate of precipitate phase fractions at each ageing condition, through analysis of a statistically significant number of precipitates. Based on the obtained results, the total amount of solute atoms locked inside precipitates could be approximated. It was shown that even with a Cu content close to impurity levels, the Al-Mg-Si system precipitation was significantly affected with overageing. The principal change was due to a gradually increasing phase fraction of the Cu-containing Q′-phase, which eventually was seen to dominate the precipitate structures. The structural overtake could be explained based on a continuous formation of the thermally stable Q′-phase, with Cu atomic columns incorporating less Cu than what could potentially be accommodated.

36 MATERIALS SCIENCE↗

Synthesis and structure of a stuffed derivative of α-quartz, Mg 0.5 AlSiO 4

A structural derivative of quartz with the composition Mg 0.5 AlSiO 4 has been grown from glass and characterized using synchrotron X-ray diffraction (XRD), transmission electron microscopy (TEM), and 29 Si nuclear magnetic resonance (NMR) spectroscopy. Rietveld analysis of the XRD data indicates that the framework of Mg 0.5 AlSiO 4 is isostructural with α-quartz, rather than β-quartz, as is consistent with previous theoretical modeling (Sternitzke and Müller 1991). Al and Si exhibit long-range disorder over the framework tetrahedral sites, indicated by the absence of the superlattice reflections corresponding to the doubling of c relative to that of quartz. Nevertheless, 29 Si NMR measurements show that Al and Si exhibit partial short-range order with an ordering degree of 56%. Electron diffraction reveals superlattice reflections indicative of doubled periodicities along the a-axes. In conclusion, Fourier electron density maps show that Mg occupies channel sites that each are bonded to six O atoms, in contrast to the tetrahedral coordination of Li in the β-quartz-type framework for β-eucryptite, LiAlSiO 4 . Furthermore, the concentrations of Mg in adjacent channels are different, resulting in framework distortions that generate the superstructures along a.

36 MATERIALS SCIENCE↗

Sub-Ångström-resolution MicroED Using a Direct Detection Camera

The recent development of microcrystal electron diffraction (MicroED) in electron cryo-microscopy (cryo-EM) has addressed many of the challenges of X-ray crystallography [1], filling a long-standing need in organic chemistry for rapid and accurate high-resolution structural characterization [2]. Like X-ray crystallography, this is also a diffraction technique requiring crystalline specimens, but because high energy electrons have a more favorable ration of elastic to inelastic scattering [3], MicroED can acquire data using crystals that are orders of magnitude smaller than those needed for X-ray crystallography—even as small as 50 nm in length [4]. Additionally, the instrumentation required for MicroED is readily available, as many chemistry and biology labs already have access to cryo-capable transmission electron microscopes (TEM).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic inactivation of Vibrio fischeri using Fe2O3-TiO2-based nanoparticles

Highlights: • A marine bacterium (Vibrio fisheri) was examined as biofilm forming microorganism. • The inactivation of bacteria was performed in saline and nutrient growth media. • The performance of five TiO{sub 2} based photocatalysts was investigated. • Effective inactivation of bacteria was achieved by visible light driven photocatalysts. Biofouling is a major problem in water membrane processes, especially in seawater reverse osmosis plants. Inactivation of Vibrio fischeri (a well-known marine bacterium forming biofilm) through photocatalysis via visible light was investigated in this work using active Fe{sub 2}O{sub 3}-TiO{sub 2} nanoparticles. Five Fe{sub 2}O{sub 3}-TiO{sub 2} photocatalysts with different weight percentage of Fe{sub 2}O{sub 3} (0–5 wt%) were synthesized using an ultrasonic-assisted co-precipitation method. The photocatalysts were characterized by powder X-ray diffraction (XRD), BET surface area, transmission electron Æ (TEM) plus selected area electron diffraction (SAED) patterns, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and diffuse-reflectance spectroscopy (DRS). Based on the design of experiments, the synthesized photocatalysts were tested for inactivation of V. fischeri under visible light irradiation at different temperatures (25–35 °C) and different photocatalyst dosage (0.1–2 g/L). The photocatalytic microbial inactivation experiments were performed in artificial seawater appropriate for growth of the marine bacterium. The results revealed that the highest inactivation efficiency of V. fischeri was achieved when 1 g/L of 2.5 wt% Fe{sub 2}O{sub 3}-TiO{sub 2} were used, at 35 °C. Photocatalytic inactivation of microorganisms using visible light-driven Fe{sub 2}O{sub 3}-TiO{sub 2} photocatalysts, could introduce an innovative green method in pretreatment units of reverse osmosis plants to control the membrane biofouling.

54 ENVIRONMENTAL SCIENCES↗

New perovskite-based manganite Pb{sub 2}Mn{sub 2}O{sub 5}

A new perovskite based compound Pb{sub 2}Mn{sub 2}O{sub 5} has been synthesized using a high pressure high temperature technique. The structure model of Pb{sub 2}Mn{sub 2}O{sub 5} is proposed based on electron diffraction, high angle annular dark field scanning transmission electron microscopy and high resolution transmission electron microscopy. The compound crystallizes in an orthorhombic unit cell with parameters a=5.736(1) A{approx}{radical}2a{sub p}, b=3.800(1) A{approx}a{sub p}, c=21.562(6) A{approx}4{radical}2a{sub p} (a{sub p}-the parameter of the perovskite subcell) and space group Pnma. The Pb{sub 2}Mn{sub 2}O{sub 5} structure consists of quasi two-dimensional perovskite blocks separated by 1/2[110]{sub p}(101){sub p} crystallographic shear planes. The blocks are connected to each other by chains of edge-sharing MnO{sub 5} distorted tetragonal pyramids. The chains of MnO{sub 5} pyramids and the MnO{sub 6} octahedra of the perovskite blocks delimit six-sided tunnels accommodating double chains of Pb atoms. The tunnels and pyramidal chains adopt two mirror-related configurations ('left' L and 'right' R) and layers consisting of chains and tunnels of the same configuration alternate in the structure according to an -L-R-L-R-sequence. The sequence is sometimes locally violated by the appearance of -L-L- or -R-R-fragments. A scheme is proposed with a Jahn-Teller distortion of the MnO{sub 6} octahedra with two long and two short bonds lying in the a-c plane, along two perpendicular orientations within this plane, forming a d-type pattern. - Graphical abstract: Order of the Jahn-Teller distorted MnO{sub 6} octahedra in Pb{sub 2}Mn{sub 2}O{sub 5}. Two long and two short bonds lie in the a-c plane, along two perpendicular orientations within this plane, forming a d-type pattern.

36 MATERIALS SCIENCE↗

Formation of magnetic grains in ferroelectric Pb[Zr{sub 0.6}Ti{sub 0.4}]O{sub 3} ceramics doped with Fe{sup 3+} above the solubility limit

The effect of excess iron-doping in piezoelectric lead-zirconate-titanate (PZT) on the microstructure was investigated by means of transmission electron microscopy in conjunction with electron diffraction and energy dispersive x-ray spectroscopy analysis. Electron paramagnetic resonance (EPR) spectroscopy has been used to characterize the site of the iron functional centers. A crystalline secondary magnetic phase formed upon sintering, magnetoplumbite (PbFe{sub 12}O{sub 19}), has been unequivocally identified. Furthermore, the phase assemblage observed in the Fe{sup 3+}-doped PZT 60/40 sample could be correlated with an exchange-coupled resonance in the EPR spectra.

36 MATERIALS SCIENCE↗

Surface Conversion of Single-Crystal Bi 2 Se 3 to β-In 2 Se 3

In this work, we demonstrate that the surface layers of single-crystal layered-2D Bi 2 Se 3 can be converted to layered-2D rhombohedral ß-In 2 Se 3 by annealing under a trimethylindium (TMIn) flux. Samples were prepared in a metalorganic chemical vapor deposition (MOCVD) chamber, then transferred under vacuum to a surface analysis chamber for analysis with low-energy electron diffraction (LEED) and Auger electron spectroscopy. Additional ex situ characterization included x-ray diffraction, transmission-electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS) elemental mapping, and Raman spectroscopy. The resulting single-crystal ß-In 2 Se 3 adopts the rhombohedral crystal structure (space group R-3m) and orientation of the underlying Bi 2 Se 3 , and the excess Bi atoms generated by this process create an underlying region of Bi-rich Bi x Se y . Due to the difference in bandgap between Bi 2 Se 3 and In 2 Se 3 , this conversion reaction presents a pathway to lateral heterojunctions if only selected regions are converted by masking the surface to spatially define the TMIn exposure. The conversion may also have implications for heteroepitaxy, because the in-plane lattice constants of Bi 2 Se 3 and In 2 Se 3 (0001) surfaces match those of InP and GaAs (111), respectively, and the natural cleavage planes of a layered-2D crystal facilitate substrate removal and reuse.

14 SOLAR ENERGY↗

Charge density measurement and bonding character in LiNiO{sub 2}

Accurate low-order structure factors of LiNiO{sub 2} were measured by quantitative convergent-beam electron diffraction (QCBED), and then transformed into X-ray structure factors with Mott formula. Combining the structure factors measured by electron diffraction with the structure factors from X-ray diffraction measurements, accurate charge density maps based on a multipole model were obtained. The parameters of the bond critical points (BCP) were calculated for topological analyses. It shows that closed-shell interactions exist between Ni and O atoms, and that the Ni-O and Ni-Ni bonds exhibit some covalent character. The calculated d-orbital occupancies show the charge deficiency at e{sub g}(e{sub g}) orbital and charge surplus at e{sub g}(t{sub 2g}) orbital. The remaining 29.12% population of e{sub g}(e{sub g}) is also an indication of covalent component in the Ni-O bond. The unusual small {kappa}{sub defv} value of the O atom is also discussed. - Graphical Abstract: Combining electron and X-ray diffraction data of LiNiO{sub 2} in multipole refinement, charge density distribution, topological properties at bond critical points and 3d orbital populations of Ni atoms were obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decomposition of L a 2 – x S r x Cu O 4 into several L a 2 O 3 phases at elevated temperatures in ultrahigh vacuum inside a transmission electron microscope

Here, we report the decomposition of La 2–x Sr x CuO 4 into La 2 O 3 and Cu nanoparticles in ultrahigh vacuum, observed by in situ heating experiments in a transmission electron microscope. The analysis of electron diffraction data reveals that the phase decomposition process starts at about 150°C and is considerably expedited in the temperature range of 350°C–450°C. Two major resultant solid phases are identified as metallic Cu and La 2 O 3 by electron diffraction, simulation, and electron energy-loss spectroscopy (EELS) analyses. With the aid of calculations, La 2 O 3 phases are further identified to be derivatives of a fluorite structure—fluorite, pyrochlore, and (distorted) bixbyite—characterized by different oxygen-vacancy order. Additionally, the bulk plasmon energy and the fine structures of the O K and LaM 4,5 EELS edges are reported for these structures, along with simulated O K x-ray absorption near-edge structure. The resultant Cu nanoparticles and La 2 O 3 phases remain unchanged after cooling to room temperature.

36 MATERIALS SCIENCE↗

Materials genome innovation for computational software (magics) center

Functional layered material (LM) architectures will dominate nanomaterials science in this century. We have developed theory, modeling, simulation, and software and data tools that enhance understanding and AI guide synthesis, enable characterization of complex structures, and improve capabilities in the predictive design and growth of LMs. Research at the Center has focused on: Computational synthesis and characterization: AI guided synthesis and experimental synthesis of stacked LMs with tailored properties via optimized chemical vapor deposition (CVD) growth and liquid-phase exfoliation; study defects, edges, grain boundaries, wrinkling of atomic layers and their effects on chemical, mechanical, electrical, and optical properties. Far-from-equilibrium processes: Joint experimental and simulation based probe of electronic processes with NAQMD and ultrafast X-ray free-electron laser (XFEL) and ultrafast electron diffraction (UED) facilities at Stanford. Experimentally validate NAQMD by ultrafast electron diffraction and X-ray spectroscopy studies of structural and excited state dynamics, shape fluctuations, and phonon dynamics. Scalable software: Simulation engines for desktop-to-exascale platforms using low-overhead, linear-scaling QMD algorithms; divide-conquer-recombine NAQMD with electronic excitations; extended-Lagrangian reactive molecular dynamics (RMD), machine learning (ML) based neural-network quantum molecular dynamics (NNQMD), and super-state accelerated molecular dynamics (AMD) and kinetic Monte Carlo codes; thermal and electrical transport software; and design 3D architectures of LMs with desired functionality using scalable software. Distribution of software and data, and training: Software and simulation-experimental data generated within the Center are distributed to the materials science community via Berkeley Materials Project (MP) framework. We have also organized three workshops for software distribution and training at USC (Nov. 2017, Mar. 2018) and Gaithersburg, MD (Nov. 2018) to train researchers, with the last one in focused on underrepresented groups, in collaboration with Howard University which is one of the largest HBCUs. The Center supported a total of 46 personnel and 6 undergraduate students. These include 14 faculty, 11 postdoctoral research associates, 20 graduate research assistants, and mentored 6 undergraduate students. This resulted in the publications of 63 research papers that include 46 publications on Reactive and Quantum Dynamics Simulations, 13 publications on Machine Learning for Quantum Materials, and 4 publications on Quantum Computing.

2D Materials↗

SEM and TEM characterization of microstructure of stainless steel composites reinforced with TiB{sub 2}

Steel-8TiB{sub 2} composites were produced by two new sintering techniques, i.e. Spark Plasma Sintering (SPS) and High Pressure-High Temperature (HP-HT) sintering. This study discusses the impact of these sintering methods on the microstructure of steel composites reinforced with TiB{sub 2} particles. Scanning electron microscopy (SEM), wavelength dispersive spectroscopy (WDS), X-ray diffraction, electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM) were used to analyze the microstructure evolution in steel matrix composites. The results of microscopic examinations revealed a close relationship between the composite microstructure and the methods and conditions of sintering. Substantial differences were observed in the grain size of materials sintered by HP-HT and SPS. It has been demonstrated that the composites sintered by HP-HT tend to form a chromium-iron-nickel phase in the steel matrix. In contrast, the microstructure of the composites sintered by SPS is characterized by the presence of complex borides and chromium-iron phase. - Highlights: •The steel-8TiB{sub 2} composites were fabricated by Spark Plasma Sintering (SPS) and High Pressure-High Temperature (HP-HT). •Sintering techniques has an important effect on changes in the microstructure of steel-8TiB{sub 2} composites. •New phases of different size and morphology were identified.

36 MATERIALS SCIENCE↗

Determination of 60° polarization nanodomains in a relaxor-based ferroelectric single crystal

We report a determination of monoclinic nanodomains in PMN-xPT with x = 31%PT by using scanning convergent beam electron diffraction (SCBED). We show the presence of 60 ± α degree nanodomains with C m -like symmetry as well as significant variations (α) in local polarization directions across lengths of ~10 nm. The principle of our technique is general and can be applied for the determination of polarization domains in other ferroelectric materials of different symmetry.

36 MATERIALS SCIENCE↗