Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Electronic and Vibrational Coherence in Heterogeneous Electron Transfer (Final Report)

Interfacial electron transfer reactions constitute key physical phenomena central to a variety of energy related transport and conversion processes such as catalysis, photocatalysis, photovoltaics, energy storage, molecular electronics, etc. Heterogeneous material systems like organic/inorganic interfaces are of particular interest because they provide great potential to tailor properties according to application specific requirements. While electron transfer dynamics has been studied intensively in heterogeneous systems many questions remain unanswered. The significance of electronic-vibrational coupling and coherence is one aspect that has yet to be fully explored. The objective of this project is to develop and implement new ultrafast spectroscopic techniques based on pump four-wave mixing spectroscopy (pump-FWM) for studying the dynamics of vibrational coupling and coherence in heterogeneous electron transfer (HET) at molecule/semiconductor interfaces. The implementation of the spectroscopic setup allows to explore different four-wave mixing techniques and thus to identify a suitable approach to study the significance of vibrational as well as electronic coherence in HET.

14 SOLAR ENERGY↗

Electron Scattering from 1-Methyl-5-Nitroimidazole: Cross-Sections for Modeling Electron Transport through Potential Radiosensitizers

In this study, we present a complete set of electron scattering cross-sections from 1-Methyl-5-Nitroimidazole (1M5NI) molecules for impact energies ranging from 0.1 to 1000 eV. This information is relevant to evaluate the potential role of 1M5NI as a molecular radiosensitizers. The total electron scattering cross-sections (TCS) that we previously measured with a magnetically confined electron transmission apparatus were considered as the reference values for the present analysis. Elastic scattering cross-sections were calculated by means of two different schemes: The Schwinger multichannel (SMC) method for the lower energies (below 15 eV) and the independent atom model-based screening-corrected additivity rule with interferences (IAM-SCARI) for higher energies (above 15 eV). The latter was also applied to calculate the total ionization cross-sections, which were complemented with experimental values of the induced cationic fragmentation by electron impact. Double differential ionization cross-sections were measured with a reaction microscope multi-particle coincidence spectrometer. Using a momentum imaging spectrometer, direct measurements of the anion fragment yields and kinetic energies by the dissociative electron attachment are also presented. Cross-sections for the other inelastic channels were derived with a self-consistent procedure by sampling their values at a given energy to ensure that the sum of the cross-sections of all the scattering processes available at that energy coincides with the corresponding TCS. This cross-section data set is ready to be used for modelling electron-induced radiation damage at the molecular level to biologically relevant media containing 1M5NI as a potential radiosensitizer. Nonetheless, a proper evaluation of its radiosensitizing effects would require further radiobiological experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron-driven and thermal chemistry during water-assisted purification of platinum nanomaterials generated by electron beam induced deposition

Focused electron beam induced deposition (FEBID) is a versatile tool for the direct-write fabrication of nanostructures on surfaces. However, FEBID nanostructures are usually highly contaminated by carbon originating from the precursor used in the process. Recently, it was shown that platinum nanostructures produced by FEBID can be efficiently purified by electron irradiation in the presence of water. If such processes can be transferred to FEBID deposits produced from other carbon-containing precursors, a new general approach to the generation of pure metallic nanostructures could be implemented. Therefore this study aims to understand the chemical reactions that are fundamental to the water-assisted purification of platinum FEBID deposits generated from trimethyl(methylcyclopentadienyl)platinum(IV) (MeCpPtMe 3 ). The experiments performed under ultrahigh vacuum conditions apply a combination of different desorption experiments coupled with mass spectrometry to analyse reaction products. Electron-stimulated desorption monitors species that leave the surface during electron exposure while post-irradiation thermal desorption spectrometry reveals products that evolve during subsequent thermal treatment. In addition, desorption of volatile products was also observed when a deposit produced by electron exposure was subsequently brought into contact with water. The results distinguish between contributions of thermal chemistry, direct chemistry between water and the deposit, and electron-induced reactions that all contribute to the purification process. We discuss reaction kinetics for the main volatile products CO and CH 4 to obtain mechanistic information. The results provide novel insights into the chemistry that occurs during purification of FEBID nanostructures with implications also for the stability of the carbonaceous matrix of nanogranular FEBID materials under humid conditions.

36 MATERIALS SCIENCE↗

Analysis of electrical charging and discharging kinetics of different glasses under electron irradiation in a scanning electron microscope

This paper presents a comparative study of electrical charging and discharging behavior of different glasses submitted to electron beam irradiation in scanning electron microscope. Charge storage and charge spreading in these glasses have been examined with help of a time resolved current method. Our interest concerns more particularly the dynamic behavior and the amount of the space charge build-up during and after electron irradiation under different experimental conditions of primary beam energy and current density. The precise contributions of different possible self regulation processes (leakage current and secondary electron emission) for charge accumulation are analyzed. Moreover, to characterize the ability of glasses to store charges in a stable way we introduce a relevant parameter that expresses quantitatively the variation in the released charge. The primary beam energy and the current density effects on the evolution of secondary electron emission yield during irradiation are also examined. As expected, the charge storage and spreading processes appear to be extremely dependent on the incident beam energy, current density and on the chemical composition of the studied glasses.

36 MATERIALS SCIENCE↗

Electron source of triode type with radial converging electron flow for irradiation of cylindrical targets

Design of an electron source of triode type is described, which produces a radial converging electron beam employed for modification of the outer surface of fuel element claddings. Experimental investigations of the source showed that beam current magnitude, efficiency of beam focusing to the target, stability of source operation, and beam pulse duration become worse when the target diameter drops below certain values. A method for the calculation of the source operation was developed. Calculations showed that the reason of worse source operation is the initial angular spread of electrons when the target diameter is small. Because of the angular spread a part of electrons passes by the target and oscillates between the target and cathode. The space charge of the oscillating electrons lowers the emission current magnitude and leads to the formation of a virtual cathode in the grid-target gap despite the fact that the emission beam current is less than the limiting one. Formation of a virtual cathode is a reason for the unstable source operation and restriction of the beam pulse duration. Recommendations for the improvement of the source design are suggested.

43 PARTICLE ACCELERATORS↗

Electron Spectroscopy In Heavy-Ion Storage Rings: Resonant and Non-Resonant Electron Transfer Processes

Whereas our understanding of total cross sections for ionization and capture processes in ion-atom collisions is widely viewed as having arrived at a state of adequate maturity, the same cannot be said at all about the dynamics of collisions, multi-electron processes or the electron continua (in target and projectile) which are at the origin of total cross sections. We depict how these processes can be studied favourably in storage ring environments. We present examples of resonant and non-resonant electron transfer processes, radiative and non-radiative. This is elucidated via the relation of the electron nucleus bremsstrahlung at the high energy tip of the bremsstrahlung spectrum to the radiative electron capture cusp (RECC) and a new approach to determining molecular orbital binding energies in superheavy quasi-molecules in resonant KK charge transfer.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effect of electron-electron interaction on cyclotron resonance in high-mobility InAs/AlSb quantum wells

We report observation of electron-electron (e-e) interaction effect on cyclotron resonance (CR) in InAs/AlSb quantum well heterostructures. High mobility values allow us to observe strongly pronounced triple splitting of CR line at noninteger filling factors of Landau levels ν. At magnetic fields, corresponding to ν > 4, experimental values of CR energies are in good agreement with single-electron calculations on the basis of eight-band k ⋅ p Hamiltonian. In the range of filling factors 3 < ν < 4 pronounced, splitting of CR line, exceeding significantly the difference in single-electron CR energies, is discovered. The strength of the splitting increases when occupation of the partially filled Landau level tends to a half, being in qualitative agreement with previous prediction by MacDonald and Kallin [Phys. Rev. B 40, 5795 (1989)]. We demonstrate that such behaviour of CR modes can be quantitatively described if one takes into account both electron correlations and the mixing between conduction and valence bands in the calculations of matrix elements of e-e interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of electron beam parameters on coherent electron cooling

Coherent electron cooling (CeC) promises to revolutionize the cooling of high energy hadron beams. The intricate dynamics of the CeC depends both on the local density and energy distribution of the beam. The variations of the local density (beam current) are inevitable in any realistic beam. Hence, in this paper we propose a novel method of beam conditioning. The conditioning provides compensation of effect from such variation by a correlated energy modulation. We use our analytical FEL model for an electron bunch with Gaussian line charge density and cosine-type energy variation along bunch. We analyze the phase variation between the electron density modulation at the exit of the FEL-amplifier and the ions inducing it in the modulator as a function of the peak current and the electron beam energy. Based on this analysis, electron bunch parameters for optimal CeC cooling are found numerically.

43 PARTICLE ACCELERATORS↗

3D Simulations of Secondary Electron Generation and Transport in a Diamond Electron Beam Amplifier

The Relativistic Heavy Ion Collider (RHIC) contributes fundamental advances to nuclear physics by colliding a wide range of ions. A novel electron cooling section, which is a key component of the proposed luminosity upgrade for RHIC, requires the acceleration of high-charge electron bunches with low emittance and energy spread. A promising candidate for the electron source is the recently developed concept of a high quantum efficiency photoinjector with a diamond amplifier. To assist in the development of such an electron source, we have implemented algorithms within the VORPAL particle-in-cell framework for modeling secondary electron and hole generation, and for charge transport in diamond. The algorithms include elastic, phonon, and impurity scattering processes over a wide range of charge carrier energies. Results from simulations using the implemented capabilities will be presented and discussed.

18-FDG↗

Temperature Dependent n-Type Self Doping in Nominally 19-Electron Half-Heusler Thermoelectric Materials

The discovery of a semiconducting ground state X y YZ (y = 0.8 or 0.75) in nominally 19-electron half-Heusler materials warrants a closer look at their apparently metallic properties that often make them good thermoelectric (TE) materials. Here, by systematically investigating the temperature dependence of off-stoichiometry (x) in V 0.8+x CoSb, Nb 0.8+x CoSb, and Ti 0.75+x NiSb it is found that x invariably increases with increasing temperature, leading to an n-type self-doping behavior. In addition, there is also a large phase width (range of x) associated with each phase that is temperature dependent. Thus, unlike in typical 18-electron half-Heuslers (e,g, TiNiSn), the temperature dependence of vacancy and carrier concentration (n) in nominally 19-electron half-Heuslers links its transport properties to synthesis conditions. The temperature dependence of x and n are understood using density functional theory based defect energies (E d ) and phase diagrams. E d are calculated for 21 systems which can be used in predicting solubility in this family of compounds. Using this simple strategy, suitable composition and temperature synthesis conditions are devised for obtaining an optimized n to engineer TE properties in phase-pure V 0.8+x CoSb, and the previously unexplored Ta 0.8+x CoSb.

19-electron half-Heuslers↗

Electron-acoustic rogue waves in a plasma with Tribeche–Tsallis–Cairns distributed electrons

The problem of electron-acoustic (EA) rogue waves in a plasma consisting of fluid cold electrons, nonthermal nonextensive electrons and stationary ions, is addressed. A standard multiple scale method has been carried out to derive a nonlinear Schrödinger-like equation. The coefficients of dispersion and nonlinearity depend on the nonextensive and nonthermal parameters. The EA wave stability is analyzed. Interestingly, it is found that the wave number threshold, above which the EA wave modulational instability (MI) sets in, increases as the nonextensive parameter increases. As the nonthermal character of the electrons increases, the MI occurs at large wavelength. Moreover, it is shown that as the nonextensive parameter increases, the EA rogue wave pulse grows while its width is narrowed. The amplitude of the EA rogue wave decreases with an increase of the number of energetic electrons. In the absence of nonthermal electrons, the nonextensive effects are more perceptible and more noticeable. In view of the crucial importance of rogue waves, our results can contribute to the understanding of localized electrostatic envelope excitations and underlying physical processes, that may occur in space as well as in laboratory plasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ti 3p electrons: core or valence?

The debate over where Ti 3p electrons should be placed (in the core or valence) has been addressed using pseudopotential-based density functional theory. This work has focused on the TiO2 rutile phase using two different Ti pseudopotentials with 4 or 10 valence electrons, depending on how the Ti 3p electrons are treated. The electronic structure of bulk TiO2 are very similar for the two potentials, and both potentials show similar bulk properties (lattice parameters, bulk modulus). Adsorption of several different types of molecules on a (110) surface gives similar results for organic and inorganic molecules, while adsorption of metal atoms leads to noticeable differences in adsorption energies (26% difference between the two pseudopotentials). This discrepancy is attributed to a larger change in the electronic state of Ti upon metal adsorption, compared to organic or inorganic molecule adsorption. The results also show that the two pseudopotential methods describe oxygen vacancies slightly differently, with a difference in vacancy formation energy being 0.32 eV. Ti in other oxidation states was modeled and both pseudopotentials work reasonably well. This study shows that the 3p electrons can often be treated as core states, but care must be taken to verify that this does not affect the simulation accuracy. Funding was provided by the Department of Energy, Office of Basic Energy Sciences. Computational resources were provided by the Molecular Science Computing Facility located at the Environmental Molecular Science Laboratory in Richland, WA and the National Energy Research Scientific Computing Center at Lawrence Berkeley National Laboratory. All work was performed at Pacific Northwest National Laboratory (PNNL). Battelle operates PNNL for the U.S. Department of Energy.

36 MATERIALS SCIENCE↗

Electron postmastectomy chest wall plus comprehensive nodal irradiation technique using Electron Monte Carlo dose algorithm

For left-sided postmastectomy patients requiring chest wall plus comprehensive nodal irradiation, sometimes traditional techniques such as partial wide tangents or electron/tangents combination are not feasible due to abnormal chest wall contour or heart position or unusually wide excision scar. We developed electron chest wall irradiation technique using Electron Monte Carlo (EMC) dose algorithm that will achieve heart sparing with acceptable ipsilateral lung dose, minimal contralateral lung, and breast dose. Ten left-sided postmastectomy patients with very challenging anatomy were selected for this dosimetry study. The en face electron fields were designed from a single isocenter and gantry angle with different energy beams using different cutouts that matched on the skin. Smaller energy was used in the central thin chest wall part and higher energy in the medial internal mammary nodes (IMN) area, superior part of the thick chest wall, and/or axillary nodal area. The electron fields were matched to the photon supraclavicular field in the superior region. Daily field junctions were used to feather the match lines between all the fields. Electron field dose calculations were done with Monte Carlo. Five patients' chest wall fields were planned with 6/9MeVcombination, 1 with 6/12 MeV, 2 with 9/12 MeV, 1 with 9/16 MeV, and 1 with 6/9/12 MeV. Institutional criteria of prescription dose of 50 Gy for target volumes and normal tissue dose were met with this technique in spite of the challenging anatomy. Mean heart dose averaged 3.0 Gy ± 0.8 Gy. For ipsilateral lung, V20Gy and V5Gy averaged 33.2% ± 4.5% and 64.6% ± 9.6%, respectively. For contralateral lung, V5Gy averaged 5.1% ± 5.0%. For contralateral breast, V5Gy averaged 3.3% ± 3.1%. The electron chest wall irradiation technique using EMC dose algorithm can provide adequate dose coverage to the chest wall, IMNs, and/or axillary nodes while achieving heart sparing with acceptable ipsilateral lung dose, minimal contralateral lung, and breast dose.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Experimental Measurements of the Secondary Electron Yield in the Experimental Measurement of the Secondary Electron Yield in the PEP-II Particle Accelerator Beam Line

Beam instability caused by the electron cloud has been observed in positron and proton storage rings and it is expected to be a limiting factor in the performance of the positron Damping Ring (DR) of future Linear Colliders (LC) such as ILC and CLIC. To test a series of promising possible electron cloud mitigation techniques as surface coatings and grooves, in the Positron Low Energy Ring (LER) of the PEP-II accelerator, we have installed several test vacuum chambers including (i) a special chamber to monitor the variation of the secondary electron yield of technical surface materials and coatings under the effect of ion, electron and photon conditioning in situ in the beam line; (ii) chambers with grooves in a straight magnetic-free section; and (iii) coated chambers in a dedicated newly installed 4-magnet chicane to study mitigations in a magnetic field region. In this paper, we describe the ongoing R&D effort to mitigate the electron cloud effect for the LC damping ring, focusing on the first experimental area and on results of the reduction of the secondary electron yield due to in situ conditioning.

43 PARTICLE ACCELERATORS↗

X-Ray Radar Imaging Technique Using a 2 Mev Linear Electron Accelerator

X-ray radar imaging, patented in 2013 by James R. Wood, combines standard radar techniques with the penetration power of x-rays to image scenes. Our project strives to demonstrate the technique using a 2 MeV linear electron accelerator (linac) to generate the S-band–modulated x-ray signals. X-ray detectors such as photodiodes and scintillators are used to detect the signals in backscatter and transmission detection schemes. The S-band microstructure is imposed on the variable-width electron pulse, and this modulation carries over to the bremsstrahlung x-rays after the electron beam is incident upon a copper-tungsten alloy target. Using phase/distance calculations and a low-jitter timing system, we expect to detect different object distances by comparing the measured phase differences. The experimental setup, which meets strict jitter requirements, and preliminary experimental results are presented.

43 PARTICLE ACCELERATORS↗

Methods for Conducting Electron Backscattered Diffraction (EBSD) on Polycrystalline Organic Molecular Thin Films

Electron backscattered diffraction (EBSD) is a technique regularly used to obtain crystallographic information from inorganic samples. When EBSD is acquired simultaneously with emitting diodes data, a sample can be thoroughly characterized both structurally and compositionally. For organic materials, coherent Kikuchi patterns do form when the electron beam interacts with crystalline material. However, such patterns tend to be weak due to the low average atomic number of organic materials. This is compounded by the fact that the patterns fade quickly and disappear completely once a critical electron dose is exceeded, inhibiting successful collection of EBSD maps from them. In this paper, a new approach is presented that allows successful collection of EBSD maps from organic materials, here the extreme example of a hydrocarbon organic molecular thin film, and opens new avenues of characterization for crystalline organic materials.

42 ENGINEERING↗

Intrinsic Li Distribution in Layered Transition-Metal Oxides Using Low-Dose Scanning Transmission Electron Microscopy and Spectroscopy

Understanding Li distribution in layered lithium transition-metal oxide (LiTMO) cathodes in Li-ion batteries has been a major challenge at the atomic scale and nanoscale. Li is extremely difficult to study by transmission electron microscopy (TEM) because the high-energy electrons impart significant energy and cause massive migration. Here, we directly map the intrinsic spatial distribution and bonding of Li in LiNiO 2 -layered cathode materials using low-dose and low-loss electron energy loss spectroscopy (EELS). EELS spectra of the Li–K edge are measured simultaneously with O–K and Ni–L, M 3,2 edges from layered, cation-mixed, and rock-salt phases and directly matched with atomic-resolution scanning TEM images to correlate the changes in peak intensities and positions to the stoichiometry changes with continual loss of Li and O. Changes in the Li content in the LiNiO 2 particles as a function of electron beam dose are studied by sequential Li spectroscopic mapping. We show that the “intrinsic” Li distribution can be observed using a total dose of less than ~1.5 × 10 8 e – nm –2 at an accelerating voltage of 80 kV. The method of nanoscale mapping of Li distribution introduced in this study is applicable to high-Ni LiTMO cathode materials (>89% of Ni) as well as LiNiO 2 . Further study on the extra peaks of the Li–K edge reveals that the peak at ~59 eV is from the Li ions intercalated in between NiO 2 layers barely interacting with each other with less Li K shell electrons pulled to the L shell electrons in NiO 2 . Furthermore, the results shown here provide improved low-loss TEM characterization approaches that can be used to understand the intrinsic fundamental behaviors in Li-ion batteries.

25 ENERGY STORAGE↗