Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrical circuits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Ripple canceling in power conversions circuits

A power circuit substantially canceling ripples at the source. The power circuit includes a switching circuit configured to control a power flow between an input and an output, a main storage element electrically connected in series with the switching circuit, and a resonant tank electrically coupled to the switching circuit and configured to compensate for switching ripples in the main storage element. Aspects of the invention can be applied to a converter circuit or to an inverter circuit.

Shamsi, Pourya↗

Finite Ground Coplanar (FGC) Waveguide: Characteristics and Advantages Evaluated for Radiofrequency and Wireless Communication Circuits

Researchers in NASA Lewis Research Center s Electron Device Technology Branch are developing transmission lines for radiofrequency and wireless circuits that are more efficient, smaller, and make lower cost circuits possible. Traditionally, radiofrequency and wireless circuits have employed a microstrip or coplanar waveguide to interconnect the various electrical elements that comprise a circuit. Although a coplanar waveguide (CPW) is widely viewed as better than a microstrip for most applications, it too has problems. To solve these problems, NASA Lewis and the University of Michigan developed a new version of a coplanar waveguide with electrically narrow ground planes. Through extensive numerical modeling and experimental measurements, we have characterized the propagation constant of the FGC waveguide, the lumped and distributed circuit elements integrated in the FGC waveguide, and the coupling between parallel transmission lines. Although the attenuation per unit length is higher for the FGC waveguide because of higher conductor loss, the attenuation is comparable when the ground plane width is twice the center conductor width as shown in the following graph. An upper limit to the line width is derived from observations that when the total line width is greater than ld/2, spurious resonances due to the parallel plate waveguide mode are established. Thus, the ground plane width must be less than ld/4 where ld is the wavelength in the dielectric. Since the center conductor width S is typically less than l/10 to maintain good transverse electromagnetic mode characteristics, it follows that a ground plane width of B = 2S would also be electrically narrow. Thus, we can now treat the ground strips of the FGC waveguide the same way that the center conductor is treated.

Ponchak, George E.↗

Sequential Polarity-Reversing Circuit

Proposed circuit reverses polarity of electric power supplied to bidirectional dc motor, reversible electro-mechanical actuator, or other device operating in direction depending on polarity. Circuit reverses polarity each time power turned on, without need for additional polarity-reversing or direction signals and circuitry to process them.

Labaw, Clayton C.↗

Lighting fixture

A lighting fixture can comprise a substantially flat sheet of metal supporting a circuit that comprises one or more light emitting diodes with one or more associated optics for manipulating emitted light. The circuit can be attached to, mounted next to, or integrated with the sheet of metal. In some examples, a layer of dielectric material adheres to the sheet of metal, and circuit elements adhere to the layer of dielectric material. Such circuit elements may comprise electrical traces, light emitting diodes, and/or a light emitting diode driver. The sheet of metal can provide a substrate for the circuit or a support for a freestanding circuit board that may be rigid or flexible.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Lighting fixture

A lighting fixture can comprise a substantially flat sheet of metal supporting a circuit that comprises one or more light emitting diodes with one or more associated optics for manipulating emitted light. The circuit can be attached to, mounted next to, or integrated with the sheet of metal. In some examples, a layer of dielectric material adheres to the sheet of metal, and circuit elements adhere to the layer of dielectric material. Such circuit elements may comprise electrical traces, light emitting diodes, and/or a light emitting diode driver. The sheet of metal can provide a substrate for the circuit or a support for a freestanding circuit board that may be rigid or flexible.

Nimma, Sridhar Reddy↗

Dielectric breakdown properties of hot SF{sub 6}/He mixtures predicted from basic data

Sulfur hexafluoride (SF{sub 6}) gas has a quite high global warming potential and hence it is required that applying any substitute for SF{sub 6} gas. Much interest in the use of a mixture of helium and SF{sub 6} as arc quenching medium was investigated indicating a higher recovery performance of arc interruption than that of pure SF{sub 6}. It is known that the electrical breakdown in a circuit breaker after arc interruption occurs in a hot gas environment, with a complicated species composition because of the occurrence of dissociation and other reactions. The likelihood of breakdown relies on the electron interactions with all these species. The critical reduced electric field strength (the field at which breakdown can occur, relative to the number density) of hot SF{sub 6}/He mixtures related to the dielectric recovery phase of a high voltage circuit breaker is calculated in the temperature range from 300 K to 3500 K. The critically reduced electric field strength of these mixtures was obtained by balancing electron generation and loss mechanisms. These were evaluated using the electron energy distribution function derived from the Boltzmann transport equation under the two-term approximation. Good agreement was found between calculations for pure hot SF{sub 6} and pure hot He and experimental results and previous calculations. The addition of He to SF{sub 6} was found to decrease the critical reduced electric field strength in the whole temperature range due to a lack of electron impact attachment process for helium regardless its high ionization potential. This indicates that not the behaviour of dielectric strength but possibly the higher energy dissipation capability caused mainly by light mass and high specific heat as well as thermal conductivity of atomic helium contributes most to a higher dielectric recovery performance of arc interruption for SF{sub 6}/He mixtures.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evaluation of Contact Separation Force Testing as a Screening Methodology for Electrical Socket Contacts

During system level testing intermittent and permanent open circuit failures of mated, crimp removable, electrical contact pairs were experienced. The root cause of the failures was determined to be low (but not zero) contact forces applied by the socket contact tines against the engaging pin. The low contact force reduces the effectiveness of the wiping action of the socket tines against the pin. The observed failure mode may be produced when insufficient wiping during mate, demate and small relative movement in use allows for the accumulation of debris or insulating films that electrically separate the contact pair. The investigation identified at least three manufacturing process control problems associated with the socket contacts that enabled shipment of contacts susceptible to developing low contact forces: (1) Improper heat treatment of the socket tines resulting in plastic rather than elastic behavior; (2) Overly thinned socket tines at their base resulting in reduced pin retention forces; (3) Insufficient screening tests to identify parts susceptible to the aforementioned failure mechanisms. The results from an extensive screening program of socket contacts utilizing the industry standard contact separation force test procedures are described herein. The investigation shows this method to be capable of identifying initially weak sockets. However, sockets whose contact retention forces may degrade during use may not be screened out by pin retention testing alone. Further investigations are required to correlate low contact retention forces with increased electrical contact resistance in the presence of insulating films that may accumulate in the use environment.

Christopher Green↗

OLED panel with fuses

Embodiments may provide a first device that may comprise a substrate, a plurality of conductive bus lines disposed over the substrate, and a plurality of OLED circuit elements disposed on the substrate, where each of the OLED circuit elements comprises one and only one pixel electrically connected in series with a fuse. Each pixel may further comprise a first electrode, a second electrode, and an organic electroluminescent (EL) material disposed between the first and the second electrodes. The fuse of each of the plurality of OLED circuit elements may electrically connect each of the OLED circuit elements to at least one of the plurality of bus lines. Each of the plurality of bus lines may be electrically connected to a plurality of OLED circuit elements that are commonly addressable and at least two of the bus lines may be separately addressable.

42 ENGINEERING↗

X-Ray-Diffraction Tests Of Irradiated Electronic Devices: I

X-ray-diffraction tests performed on aluminum conductors in commercial HI1-507A complementary metal oxide/semiconductor (CMOS) integrated-circuit analog multiplexers, both before and after circuits exposed to ionizing radiation from Co(60) source, and after postirradiation annealing at ambient and elevated temperatures. Tests in addition to electrical tests performed to determine effects of irradiation and of postirradiation annealing on electrical operating characteristics of circuits. Investigators sought to determine whether relationship between effects of irradiation on devices and physical stresses within devices. X-ray diffraction potentially useful for nondestructive measurement of stresses.

Shaw, David C.↗

Compact chromium oxide thin film resistors for use in nanoscale quantum circuits

We report on the electrical characterisation of a series of thin amorphous chromium oxide (CrO{sub x}) films, grown by dc sputtering, to evaluate their suitability for use as on-chip resistors in nanoelectronics. By increasing the level of oxygen doping, the room-temperature sheet resistance of the CrO{sub x} films was varied from 28 Ω/◻ to 32.6 kΩ/◻. The variation in resistance with cooling to 4.2 K in liquid helium was investigated; the sheet resistance at 4.2 K varied with composition from 65 Ω/◻ to above 20 GΩ/◻. All of the films measured displayed linear current–voltage characteristics at all measured temperatures. For on-chip devices for quantum phase-slip measurements using niobium–silicon nanowires, interfaces between niobium–silicon and chromium oxide are required. We also characterised the contact resistance for one CrO{sub x} composition at an interface with niobium–silicon. We found that a gold intermediate layer is favourable: the specific contact resistivity of chromium-oxide-to-gold interfaces was 0.14 mΩcm{sup 2}, much lower than the value for direct CrO{sub x} to niobium–silicon contact. We conclude that these chromium oxide films are suitable for use in nanoscale circuits as high-value resistors, with resistivity tunable by oxygen content.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ground-referenced single-ended signaling connected graphics processing unit multi-chip module

A system of interconnected chips comprising a multi-chip module (MCM) includes a first processor chip, a graphics processing cluster (GPC) chip, and an MCM package configured to include the first processor chip, the GPC chip, and an interconnect circuit. The first processor chip is configured to include a first ground-referenced single-ended signaling interface circuit. A first set of electrical traces fabricated within the MCM package and configured to couple the first single-ended signaling interface circuit to the interconnect circuit. The GPC chip is configured to include a second single-ended signaling interface circuit and to execute shader programs. A second set of electrical traces fabricated within the MCM package and configured to couple the second single-ended signaling interface circuit to the interconnect circuit. In one embodiment, each single-ended signaling interface advantageously implements ground-referenced single-ended signaling.

Dally, William J.↗

Contact assembly

An electrical contact assembly includes an electrically nonconductive base, a first electrical contact supported by the base and a second electrical contact supported by the base such that the first contact and the second contact are separated by a space. The first electrical contact is configured to engage a first external conductive circuit element and the a second electrical contact is configured to engage a second external conductive circuit element. The first contact and the second contact are configured such that a portion of the first contact and a portion of the second contact converge as the base moves in a first direction relative to the first and second external conductive circuit elements and diverge as the base moves in a second direction relative to the first and second external conductive circuit elements.

42 ENGINEERING↗

Contact assembly

An electrical contact assembly includes an electrically nonconductive base, a first electrical contact supported by the base and a second electrical contact supported by the base such that the first contact and the second contact are separated by a space. The first electrical contact is configured to engage a first external conductive circuit element and the a second electrical contact is configured to engage a second external conductive circuit element. The first contact and the second contact are configured such that a portion of the first contact and a portion of the second contact converge as the base moves in a first direction relative to the first and second external conductive circuit elements and diverge as the base moves in a second direction relative to the first and second external conductive circuit elements.

Hatch, Stephen McGarry↗

Study of a Solar Sensor for use in Space Vehicle Orientation Control Systems

The solar sensor described herein may be used for a variety of space operations requiring solar orientation. The use of silicon solar cells as the sensing elements provides the sensor with sufficient capability to withstand the hazards of a space environment. A method of arranging the cells in a sensor consists simply of mounting them at a large angle to the base. The use of an opaque shield placed between the cells and perpendicular to the base enhances the small-angle sensitivity while adding slightly to the bulk of the sensor. The difference in illumination of these cells as the result of an oblique incidence of the light rays from the reference source causes an electrical error signal which, when used in a battery-bridge circuit, requires a minimum of electrical processing for use in a space-vehicle orientation control system. An error which could occur after prolonged operation of the sensor is that resulting from asymmetrical aging of opposite cells. This could be periodically corrected with a balance potentiometer. A more routine error in the sensor is that produced by reflected earth radiation. This error may be eliminated over a large portion of the operation time by restricting the field of view and, consequently, the capture capability. A more sophisticated method of eliminating this error is to use separate sensors, for capture and fine pointing, along with a switching device. An experimental model has been constructed and tested to yield an output sensitivity of 1.2 millivolts per second of arc with a load resistance of 1,000 ohms and a reference light source of approximately 1,200 foot-candles delivered at the sensor.

Spencer, Paul R.↗

Pt/HTCC Alumina based Electronic Packaging System and Integration Processes for High Temperature Harsh Environment Applications

Electronic devices capable of operation at 500°C are required for long term Venus surface missions, as well as for in situ monitoring and control of next generation aeronautical engines. High temperature sensors and electronics can also find many applications in military, and energy and automobile industries. Various silicon carbide (SiC) sensors and electronic devices have been developed for operation at 500 °C, and a compatible packaging system is needed for long term test and deployment of these high temperature devices. High temperature co-fired ceramics (HTCC) alumina with platinum (Pt) conductor was proposed for high temperature electronic packaging. A prototype Pt/HTCC alumina packaging system including chip-level package and circuit board has been briefly reported previously for long-term electrical testing of SiC integrated circuits at 500 °C, and brief testing at much higher temperatures. HTCC alumina is an excellent dielectric material with acceptable dielectric constant and low dielectric loss over wide temperature and frequency ranges. Pt is chemically noble and can be co-fired with HTCC alumina in air ambient producing a viable electronic packaging material system for high temperature applications. This paper presents a more detailed description of this packaging system including prototype low power packages and circuit boards based on HTCC alumina and Pt metallization for 500°C and other harsh environment applications. The key technical considerations for chip-level packaging and circuit board assembly, including materials and processes for 500 °C durable wire-bonding and SiC die attach, and integration of multi-chip circuit boards, are presented. Experimental test results of this packaging approach applied to SiC integrated circuits at 500 °C and 700°C are discussed as well.

High temperature↗

Pt/HTCC Alumina based Electronic Packaging System and Integration Processes for High Temperature Harsh Environment Applications

Electronic devices capable of operation at 500°C are required for long term Venus surface missions, as well as for in situ monitoring and control of next generation aeronautical engines. High temperature sensors and electronics can also find many applications in military, and energy and automobile industries. Various silicon carbide (SiC) sensors and electronic devices have been developed for operation at 500 °C, and a compatible packaging system is needed for long term test and deployment of these high temperature devices. High temperature co-fired ceramics (HTCC) alumina with platinum (Pt) conductor was proposed for high temperature electronic packaging. A prototype Pt/HTCC alumina packaging system including chip-level package and circuit board has been briefly reported previously for long-term electrical testing of SiC integrated circuits at 500 °C, and brief testing at much higher temperatures. HTCC alumina is an excellent dielectric material with acceptable dielectric constant and low dielectric loss over wide temperature and frequency ranges. Pt is chemically noble and can be co-fired with HTCC alumina in air ambient producing a viable electronic packaging material system for high temperature applications. This paper presents a more detailed description of this packaging system including prototype low power packages and circuit boards based on HTCC alumina and Pt metallization for 500°C and other harsh environment applications. The key technical considerations for chip-level packaging and circuit board assembly, including materials and processes for 500 °C durable wire-bonding and SiC die attach, and integration of multi-chip circuit boards, are presented. Experimental test results of this packaging approach applied to SiC integrated circuits at 500 °C and 700°C are discussed as well.

electronic packaging↗