Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effectiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Effect of SO 2 on oxidation of metallic materials in CO 2 /H 2 O-rich gases relevant to oxyfuel environments: Effect of SO 2 on oxidation of metallic materials

In an oxyfuel plant, heat exchanging metallic components will be exposed to a flue gas that contains substantially higher contents of CO2, water vapor, and SO2 than conventionalflue gases. In the present study, the oxidation behavior of the martensitic steel P92 was studied in CO2-and/or H2O-rich gas mixtures with and without addition of SO2. For this purpose, the corrosion of P92 at 550 8C up to 1000 h in Ar–H2O–SO2, Ar–CO2–SO2, Ar–CO2–O2–SO2 and simulated oxyfuel gas (Ar–CO2–H2O–O2–SO2) was compared with the behavior in selected SO2-free gases. The oxidation kinetics were estimated by a number of methods such as optical microscopy, scanning electron microscopy with energy and wave length dispersive X-ray analysis, glow discharge optical emission spectroscopy, X-ray diffraction as well as transmission electron microscopy. The experimental results revealed that the effect of SO2 addition on the materials behavior substantially differed, depending on the prevailing base gas atmosphere. The various types of corrosion attack affected by SO2 could not be explained by solely comparing equilibrium activities of the gas atmospheres with thermodynamic stabilities of possible corrosion products. The results were found to be strongly affected by relative rates of reactions of the various gas species occurring within the frequently porous corrosion scales as well as at the scale/gas-and scale/alloy interfaces.Whereas SO2 addition to Ar–CO2 resulted in formation of an external mixed oxide/sulflde layer, the presence of SO2 in oxyfuel gas and in Ar–H2O–SO2 resulted in Fe-sulflde formation near the interface between inner and outer oxide layer as well as Cr-sulflde formation in the alloy. In the latter gases, the presence of SO2 seemed to have no dramatic effect on oxide scale growth rates.

36 MATERIALS SCIENCE↗

Regime dependence of ice cloud heterogeneity – a convective life‐cycle effect?

Cloud condensate varies on scales smaller than those typically resolved by global weather and climate models. In order to accurately predict the radiative and microphysical process rates representative of the entire model grid box, the effect of the subgrid‐scale heterogeneity of cloud must be taken into account. In this study, observed ice water content retrieved from A‐Train satellite observations is used to explore how spatial ice condensate variability, characterized by the fractional standard deviation (FSD, the standard deviation divided by the mean), varies with cloud regime. FSD is generally lower for overcast cloud scenes, but an additional predictor based on convective activity is needed to capture the high FSD associated with more turbulent clouds and reproduce the observed latitudinal and height variations of FSD. Convective clouds that extend only a few kilometres above the freezing level are likely to be smaller at an earlier stage in their life cycle, and actively growing with a higher FSD. In contrast, more mature clouds reaching the tropopause are larger and generally have a lower variability and smaller FSD. To capture this life‐cycle effect, a new parametrization is tested which uses the ratio of a model's convectively detrained condensate to the existing cloud condensate mass as a proxy for the cloud's convective life stage to highlight areas with enhanced condensate variability. The parametrization is scale‐adaptive, situation‐dependent and captures seasonally varying global patterns and the zonal mean vertical structure of observed ice condensate variability well. Ground‐based observations obtained from five Atmospheric Radiation Measurement sites provide independent confirmation that the parametrization satisfactorily captures condensate variability in high‐altitude ice clouds.

Ahlgrimm, Maike↗

Effects of solid aerosols on partially glaciated clouds

Sensitivity tests were conducted using a state‐of‐the‐art aerosol–cloud to investigate the key microphysical and dynamical mechanisms by which solid aerosols affect glaciated clouds. The tests involved simulations of two contrasting cases of deep convection—a tropical maritime case and a midlatitude continental case, in which solid aerosol concentrations were increased from their pre‐industrial (1850) to their present‐day (2010) levels. In the midlatitude continental case, the boosting of the number concentrations of solid aerosols weakened the updrafts in deep convective clouds, resulting in reduced snow and graupel production. Consequently, the cloud fraction and the cloud optical thickness increased with increasing ice nuclei (IN), causing a negative radiative flux change at the top of the atmosphere (TOA), that is, a cooling effect of −1.96 ± 0.29 W/m 2 . On the other hand, in the tropical maritime case, increased ice nuclei invigorated upper‐tropospheric updrafts in both deep convective and stratiform clouds, causing cloud tops to shift upwards. Snow production was also intensified, resulting in reduced cloud fraction and cloud optical thickness, hence a positive radiative flux change at the TOA—a warming effect of 1.02 ± 0.36 W/m 2 was predicted.

Kudzotsa, Innocent↗

Direct Visualization of Li Dendrite Effect on LiCoO 2 Cathode by In Situ TEM

Li dendrites are known to cause deterious, and in many cases catastrophic, effect on the performance of Li rechargeable batteries. However, the mechanistic failure mechanism of cathodes upon in contact with Li metal is far from clear. In this study, using in situ transmission electron microscopy, we directly visualize at an atomic scale the interaction of Li dendrites with well-defined, epitaxial thin films of LiCoO2, the most widely used cathode material. We show that a spontaneous and prompt chemical reaction is trigged once the Li contact is made, leading to expansion and amorphization of the LiCoO2 structure, with Li2O and Co metal being the final reaction products. A topotactic phase transition is identified close to the reaction front, resulting in the formation of CoO as a metastable intermediate. Dynamic structural and chemical imaging in combination with ab inito simulations reveal that a high density of antiphase grain boundaries are formed at the reaction front, which are critical for enabling the short-range topotactic reactions and long-range Li propagation. The fundamental insights are of general importance in mitigating Li dendrites related issues and guiding the design principle for more robust energy materials.

In situ transmission electron microscopy (TEM), Li↗

Zero-range effective field theory for resonant wino dark matter. Part III. Annihilation effects

Near a critical value of the wino mass where there is a zero-energy S-wave resonance at the neutral-wino-pair threshold, low-energy winos can be described by a zero-range effective field theory (ZREFT) in which the winos interact nonperturbatively through a contact interaction and through Coulomb interactions. Here, the effects of wino-pair annihilation into electroweak gauge bosons are taken into account through the analytic continuation of the real parameters for the contact interaction to complex values. The parameters of ZREFT can be determined by matching wino-wino scattering amplitudes calculated by solving the Schrödinger equation for winos interacting through a real potential due to the exchange of electroweak gauge bosons and an imaginary potential due to wino-pair annihilation into electroweak gauge bosons. ZREFT at leading order gives an accurate analytic description of low-energy wino-wino scattering, inclusive wino-pair annihilation, and a wino-pair bound state. ZREFT can also be applied to partial annihilation rates, such as the Sommerfeld enhancement of the annihilation rate of wino pairs into monochromatic photons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of weave path parameters on the geometry of wire arc additive manufactured features

Here, the present work investigates the effect of process parameters on the geometry of wire arc additive manufactured parts. The geometric accuracy of features produced with a weaving strategy is compared to what can be accomplished with a typical overlapping bead strategy. In this work, single-layer and multi-layer geometries were deposited under varying process and path parameters. The wavelength, amplitude, and torch speed of the weaving path were varied, while the power, wire feed speed, and contact tip to work distance remained constant. The geometric deposition efficiencies of several samples produced with a weave strategy are directly compared to samples generated with two parallel overlapping beads with torch speeds defined to match the deposition rate of the weave samples. Feature geometries were characterized using optical microscopy and laser scanning data. The results indicate that implementing a weave path strategy can improve the geometric accuracy of wire arc additive features, thus increasing the effective volumetric deposition rate of the process. It is shown that the most consistent improvements resulted from the combination of low wavelength and high amplitude, which correlate to wider and taller printed layers.

GMAW↗

Use of gene probes to assess the impact and effectiveness of aerobic in situ bioremediation of TCE

Gene probe hybridization was used to determine distribution and expression of co-metabolic genes at a contaminated site as it underwent in situ methanotrophic bioremediation of trichloroethylene (TCE). The bioremediation strategies tested included a series of air, air:methane, and air:methane:nutrient pulses of the test plot using horizontal injection wells. During the test period, the levels of TCE reduced drastically in almost all test samples. Sediment core samples (n = 367) taken from 0 m (surface)-43 m depth were probed for gene coding for methanotrophic soluble methane monooxygenase (sMMO) and heterotrophic toluene dioxygenase (TOD), which are known to co-metabolize TCE. The same sediment samples were also probed for genes coding for methanol dehydrogenase (MDH) (catalyzing the oxidation of methanol to formaldehyde) to assess specifically changes in methylotrophic bacterial populations in the site. Gene hybridization results showed that the frequency of detection of sMMO genes were stimulated approximately 250% following 1% methane:air (v/v) injection. Subsequent injection of 4% methane:air (v/v) resulted in an 85% decline probably due to nutrient limitations, since addition of nutrients (gaseous nitrogen and phosphorus) thereafter caused an increase in the frequency of detection of sMMO genes. Detection of TOD genes declined during the process, and eventually they were non-detectable by the final treatment, suggesting that methanotrophs displaced the TOD gene containing heterotrophs. Active transcription of sMMO and TOD was evidenced by hybridization to mRNA. These analyses combined with results showing the concomitant decline in TCE concentrations, increases in chloride concentration and increases in methanotroph viable counts, provide multiple lines of evidence that TCE remediation was caused specifically by methanotrophs. Our results suggest that sMMO genes are responsible for most, if not all, of the observed biodegradation of TCE. This study demonstrates that the use of nucleic acid analytical methods provided a gene specific assessment of the effects of in situ treatment technologies.

54 ENVIRONMENTAL SCIENCES↗

Atomic-scale modeling of particle size effects for the oxygen reduction reaction on Pt.

We estimate the activity of the oxygen reduction reaction on platinum nanoparticles of sizes of practical importance. The proposed model explicitly accounts for surface irregularities and their effect on the activity of neighboring sites. The model reproduces the experimentally observed trends in both the specific and mass activities for particle sizes in the range between 2 and 30 nm. The mass activity is calculated to be maximized for particles of a diameter between 2 and 4 nm. Our study demonstrates how an atomic-scale description of the surface microstructure is a key component in understanding particle size effects on the activity of catalytic nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A cost-benefit analysis to select the most effective method for positional cloning: genotyping by sequencing versus allele-specific PCR

Next-generation sequencing technologies have enabled the rapid generation of high-resolution genetic maps to enable the identification of genomic regions associated with traits of interest. In certain cases these regions of interest need to be narrowed down via fine mapping to increase resolution to the level of the individual gene. In those cases, there is a choice of genotyping options, whereby cost, time, and information content need to be considered. We developed detailed, customizable models to compare the cost of genotyping by sequencing and allele-specific PCR for fine-mapping genomic regions of interest. The models were validated experimentally with data from a fine-mapping experiment designed to identify candidate genes within a 3.2-Mb disease resistance locus in the cereal crop sorghum (Sorghum bicolor (L.). Moench), which has a sequenced genome. The size of the mapping population, genetic diversity of the parental lines, choice of reagents, and labor cost were shown to influence the overall cost of the two methods, and, consequently, which method would be most cost-effective for a given experiment. Here, the model can be easily customized to reflect experiments with different species, genetic populations, experimental and personnel costs to determine the most cost-effective procedure for a new positional cloning project.

Cost analysis↗

Computational study of the effect of core–skin structure on the mechanical properties of carbon nanofibers

The effect of the core–skin structure on the mechanical properties of carbon nanofibers is investigated in large-scale molecular dynamics simulations of tensile deformation of carbon nanofibers with the core–skin and homogeneous structures. Contrary to an established notion of the deleterious effect of the skin layer on the strength of carbon fibers, the presence of a high-quality skin layer is found to increase both the Young’s modulus and tensile strength of the nanofiber. A detailed analysis of the fracture process indicates that the nanofiber strengthening is related to the ability of skin layer to suppress crack nucleation at the core–skin interface. Furthermore, the computational predictions suggest that the design of new approaches to carbon fiber manufacturing and processing leading to the generation of a high-quality skin layer while avoiding the introduction of structural defects at the core–skin interface may yield a significant enhancement of the mechanical properties of carbon fibers.

36 MATERIALS SCIENCE↗

Effect of Pressure and Thermal Cycling on Long-Term Oxidation in CO 2 and Supercritical CO 2

Concentrating solar power plant designers are interested in supercritical CO 2 (sCO 2 ) for the power block to achieve > 50% electrical efficiency at > 700 °C. The goal of this project was to develop a long-term (> 100 kh) lifetime model for sCO 2 compatibility using 10–15 kh laboratory exposures. Three Ni-based alloys (625, 282 and 740H) and an advanced austenitic stainless steel were evaluated here in long-term exposures at 700–800 °C using 500-h cycles in laboratory air, 0.1 MPa industrial grade (IG) CO 2 and 30 MPa supercritical IG CO 2 and using 10-h cycles in 0.1 MPa IG CO 2 and O 2 . Mass change data and quantification of the oxide scale thickness and depth of internal attack after 1000–10,000 h exposures at 750 °C indicate that these materials are compatible with the sCO 2 environments with modeling used to predict long-term behavior. Comparison of the 0.1 and 30 MPa 500-h cycle results did not show a significant effect of pressure on the reaction, and no significant internal carburization was observed under these conditions, even for the stainless steel, suggesting that chromia scales may be better C diffusion barriers than expected. For the Ni-based alloys, thermal cycling to simulate the solar duty cycle did not result in scale spallation after 15 kh in 10-h cycles or 4 kh in 1-h cycles at 750 °C. However, the stainless steel specimens formed an Fe-rich oxide after ~ 1500-h cumulative exposure time in both 1- and 10-h cycles.

36 MATERIALS SCIENCE↗

Predicting the Electric Field Effect on the Lateral Interactions Between Adsorbates: O/Fe(100) from First Principles

A density functional theory parameterized lattice gas cluster expansion of oxygen on an Fe(100) surface is developed in the presence and absence of an applied positive and negative external electric field, characterizing the heterogeneity in oxygen's surface distribution and the effect of an external electric field on the lateral interactions between the adsorbates. We show that the presence of a negative electric field tends to weaken both attractive and repulsive interactions while the positive electric field tends to strengthen these interactions, altering surface distributions and ground state configurations. Since lateral interactions have been shown to play a critical role in defining catalytic behavior, the application of an applied electric field has the potential to be a useful tool in adjusting critical chemical properties of Fe-based hydrodeoxygenation catalysts, by decreasing the repulsive interactions between the adspecies in the presence of a negative field and thereby mitigating the formation of an oxide.

Bray, Jacob E.↗

The Effects of Cold Work on the Microstructure and Mechanical Properties of Intermetallic Strengthened Alumina-Forming Austenitic Stainless Steels

In order to achieve energy conversion efficiencies of > 50 pct for steam turbines/boilers in power generation systems, materials are required that are both strong and corrosion-resistant at > 973 K (700 A degrees C), and economically viable. Austenitic steels strengthened with Laves phase, NiAl and Ni3Al precipitates, and alloyed with aluminum to improve oxidation resistance, are potential candidate materials for these applications. The microstructure and microchemistry of recently developed alumina-forming austenitic stainless steels have been characterized by scanning electron microscopy, transmission electron microscopy, and synchrotron X-ray diffraction. Different thermo-mechanical treatments were performed on these steels to improve their mechanical performance. These reduced the grain size significantly to the nanoscale (similar to 100 nm) and the room temperature yield strength to above 1000 MPa. A solutionizing anneal at 1473 K (1200 A degrees C) was found to be effective for uniformly redistributing the Laves phase precipitates that form upon casting. (C) The Minerals, Metals & Materials Society and ASM International 2015

Hu, B.↗

Shear Assisted Processing and Extrusion (ShAPE™) of AZ91E Flake: A Study of Tooling Features and Processing Effects

Charges of melt-spun AZ91E flake were indirectly extruded into tubes using Shear Assisted Processing and Extrusion (ShAPE™). The effect of instrument parameters and tool features on densification and microstructural evolution was studied. At a constant extrusion ratio, the tool rotational velocity varied from 75 to 300 rpm and was demonstrated to reduce the forge force by a factor of four. Modification of the extrusion die face with successively more aggressive scrolled features was found to enhance material flow into the extrusion orifice which led to a 30% reduction in spindle torque. Microstructure, texture and hardness are reported for the range of rpm and scroll geometries investigated. It was observed that the ShAPE™ process is able to retain the average grain size of the as-spun flake (2.5-4 μm) while simultaneously imparting strong textural alignment in the resultant tube.

36 MATERIALS SCIENCE↗

The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe 40.4 Ni 11.3 Mn 34.8 Al 7.5 Cr 6 high entropy alloys

A systematic study of the effects of up to 1.1 at. % carbon on the mechanical properties and evolution of the dislocation substructure in a series of a high entropy alloys (HEA) based on Fe40.4Ni11.3Mn34.8Al7.5Cr6 is presented. Transmission electron microscopy (TEM), synchrotron X-ray diffraction (XRD) and atom probe tomography (APT) were used to show that all the alloys are single-phase f.c.c. random solid solutions. The lattice constant, determined from synchrotron XRD measurements, increases linearly with increasing carbon concentration, which leads to a linear relationship between the yield strength and the carbon concentration. The dislocation substructures, as determined by a TEM, show a transition from wavy slip to planar slip and, at higher strains, and from cell-forming structure (dislocations cells, cell blocks and dense dislocation walls) to non-cell forming structure (Taylor lattice, microbands and domain boundaries) with the addition of carbon, features related to the increase in lattice friction stress. The stacking fault energy (measured via weak-beam imaging of the separation of dislocation partials) decreases with increasing carbon content, which also contributes to the transition from wavy slip to planar slip. The formation of non-cell forming structure induced by carbon leads to a high degree of strain hardening and a substantial increase in the ultimate tensile strength. The consequent postponement of necking due to the high strain hardening, along with the plasticity accommodation arising from the formation of microbands and domain boundaries, result in an increase of ductility due to the carbon addition. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Dislocation structures↗