The multiply charged primary cosmic radiation at solar minimum, 1965.
Primary cosmic ray charge and energy spectra for helium through oxygen during 1965 minimum solar modulation effect
SOLAR ACTIVITY EFFECT↗
SEARCH · Engineering Papers
Results for “ENERGY SPECTRA”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Comparison of big event with calculations of the air shower development
The incidence of high energy hadrons and electron-photons in air showers at various stages of development is calculated. Numerical calculation is used to solve the diffusion equation for a nuclear cascade and analytical calculation for cascade shower induced gamma rays. From these calculations, one can get the longitudinal development of the high energy hadron and electron-photon components, and the energy spectra of these components at various depths of air shower development. The total number of hadrons (N sub H) and electron-photon components (N sub gamma) are related according to stages of the air shower development and primary energy. The relation of the total energy of hadron and electron-photon component above the threshold energy is given. The energy balance between both components is also a useful parameter to study high energy events accompanying air showers. The relation of N sub H and fractional hadronic energy E (sum E sub H sup gamma/sum E sub H sup gamma + Sum E sub gamma) is calculated. This relation is helpful to understand the stage of air shower development(t) and primary energy (E sub p).
Niwa, M.↗
Neutron Leakage Spectra Sensitivities for ICSBEP Benchmarks
Neutron leakage spectra have been measured, simulated, and investigated by many groups. These spectra have many uses, including determining shielding requirements and calculating dose for radiation protection purposes, validating nuclear data, and determining material composition. It has even been proposed to use measurements of neutron leakage spectra to determine the soil composition of Mars. As part of the Los Alamos National Laboratory (LANL) Experiments Underpinned by Computational Learning for Improvements in nuclear Data (EUCLID) Laboratory Directed Research Development (LDRD) project, the authors are working on developing methods to calculate sensitivities to neutron leakage spectra. This may allow nuclear data evaluators to better use neutron leakage spectra data to constrain or adjust nuclear data. This may also be particularly useful as many neutron leakage spectra measurements do not require fissile material and can be performed with well characterized neutron sources. Neutron leakage spectra measurements are usually performed by placing a detector at the outside of a nuclear system. This may be a reactor, a neutron generator, or a neutron source. Certain detection systems can use pulse height data to infer neutron energies, other detector systems rely on other ways of determining neutron energy (for example, a Bonner sphere with multiple moderator thicknesses can be used to measure neutron spectrum). These measurements typically rely on some unfolding of the measured results. For pulsed systems like the "Livermore Pulsed Spheres," time-of-flight information can also help to constrain the neutron energy spectra data.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Deep learning based event reconstruction for cyclotron radiation emission spectroscopy
The objective of the cyclotron radiation emission spectroscopy (CRES) technology is to build precise particle energy spectra. This is achieved by identifying the start frequencies of charged particle trajectories which, when exposed to an external magnetic field, leave semi-linear profiles (called tracks) in the time–frequency plane. Due to the need for excellent instrumental energy resolution in application, highly efficient and accurate track reconstruction methods are desired. Deep learning convolutional neural networks (CNNs) - particularly suited to deal with information-sparse data and which offer precise foreground localization—may be utilized to extract track properties from measured CRES signals (called events) with relative computational ease. In this work, we develop a novel machine learning based model which operates a CNN and a support vector machine in tandem to perform this reconstruction. A primary application of our method is shown on simulated CRES signals which mimic those of the Project 8 experiment—a novel effort to extract the unknown absolute neutrino mass value from a precise measurement of tritium β - -decay energy spectrum. When compared to a point-clustering based technique used as a baseline, we show a relative gain of 24.1% in event reconstruction efficiency and comparable performance in accuracy of track parameter reconstruction.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Studies of acceleration processes in the corona using ion measurements on the solar probe mission
The energy spectra and composition of particles escaping from the Sun provide essential information on mechanisms responsible for their acceleration, and may also be used to characterize the regions where they are accelerated and confined and through which they propagate. The suprathermal energy range, which extends from solar wind energies (approximately 1 KeV) to about 1 MeV/nucleon, is of special interest to studies of nonthermal acceleration processes because a large fraction of particles is likely to be accelerated into this energy range. Data obtained from near earth observations of particles in the suprathermal energy range are reviewed. The necessary capabilities of an a ion composition experiment in the solar probe mission and the required ion measurements are discussed. A possible configuration of an instrument consisting of an electrostatic deflection system, modest post acceleration, and a time of flight versus energy system is described as well as its possible location on the spacecraft.
Gloeckler, G.↗
Cosmic ray investigation for the Voyager missions: Energetic particle studies in the outer heliosphere - and beyond
The Voyager mission cosmic ray detector system, consisting entirely of solid-state charged-particle detectors, is designed to measure the energy spectrum of electrons in the range 3 to 110 MeV and the energy spectra and elemental composition of cosmic ray nuclei from hydrogen through iron in the range 1 to 500 MeV/nuc; for isotopes of hydrogen through sulfur the range is approximately 2 to 75 MeV/nuc. The cosmic ray investigation deals with the energy content, origin and acceleration process, and dynamics of cosmic rays in the galaxy, with particular attention given to low-energy phenomena in interstellar space and the outer solar system. The precise measurement of three-dimensional stream patterns of nuclei from H to Fe, as well as electrons over a wide energy range, is the data acquisition program emphasized.
Stone, E. C.↗
Spectral characterization of flash and high flux x-ray radiographic sources with a magnetic Compton spectrometer
In this article, we present a new analysis method applied to revitalize permanent magnet Compton spectrometers used to measure photon energy spectra in the MeV range. The inversion of the measured electron distribution to determine the original photon distribution is achieved via a method of consistent coupled radiation transport and magnetic field mapping of the input photon spectra to the measured electron distribution. The method of linear least squares was used to perform the unfolding of the electron distribution to the initial photon spectra, without any assumptions made regarding the electron distribution. We present an application of this method to data from a nominal 19.4 MeV flash radiographic source (the first axis of the Dual Axis Radiographic Hydro-Test Facility) capable of generating 500 R @ 1 m in ~60 ns and a medical therapy source (a Scanditronix M22, Microtron) capable of variable energies with nominal endpoints of 6, 10, 15, and 20 MeV and an output of ~1000–2000 R/min @ 1 m. The results provide agreement between the modeled and unfolded experimentally measured photon spectra as quantified by statistical tests, from 1.5 to 20 MeV. Experimental results are presented as well as a discussion of the novel MCNP6-based simulations and methods for reconstruction of the spectra.
47 OTHER INSTRUMENTATION↗
Polar cap electron acceleration regions
The characteristics of polar cap electron acceleration regions and the relationship of their occurrence to the interplanetary magnetic field (IMF) have been investigated by using data from Atmosphere Explorer D and Imp J. It was found that electron energy spectra and angular distributions within the acceleration regions are generally consistent with models of acceleration of auroral primaries and reflection of atmospheric secondaries by field-aligned electrostatic potential differences. However, localized strongly field-aligned fluxes are also observed at energies below the spectral peak. It is suggested that these transient beams of field-aligned low-energy electrons result from the acceleration of thermal electrons from within the acceleration regions and that this thermal electron population may be partially replenished by small pitch angle atmospheric secondaries. The occurrence of the polar cap acceleration regions in the northern hemisphere is strongly correlated with IMF vectors which project into the (-X, +Z) sector of the solar magnetospheric X-Z plane; that is, with northward 'away' IMF polarities.
Burch, J. L.↗
The ATIC Experiment: First Balloon Flight
The Advanced Thin Ionization Calorimeter (ATIC) Balloon Experiment had its maiden test flight from McMurdo, Antarctica 28/12/00 to 13/01/01, local time, recording over 360 hours of data. ATIC was designed to measure the composition and energy spectra of cosmic rays from approx. 10 GeV to near 100 TeV utilizing a Si matrix detector to determine charge in conjunction with a scintillator hodoscope which measures charge and trajectory. Cosmic rays that interact in a carbon target have their energy determined from the shower that develops within a fully active calorimeter composed of a stack of scintillating BGO (Bismuth Germanate) crystals. ATIC's geometry factor is about 0.25 sq. m -sr. During line-of-sight operations much of the datastream was transmitted to the ground. For most of the flight, the data was recorded on-board, yielding 45 GB of flight data for analysis. The payload construction, operations and in-flight performance are described, along with preliminary results from the on-going analysis.
Wefel, J. P.↗
A Deterministic Electron, Photon, Proton and Heavy Ion Radiation Transport Suite for the Study of the Jovian System
A deterministic suite of radiation transport codes, developed at NASA Langley Research Center (LaRC), which describe the transport of electrons, photons, protons, and heavy ions in condensed media is used to simulate exposures from spectral distributions typical of electrons, protons and carbon-oxygen-sulfur (C-O-S) trapped heavy ions in the Jovian radiation environment. The particle transport suite consists of a coupled electron and photon deterministic transport algorithm (CEPTRN) and a coupled light particle and heavy ion deterministic transport algorithm (HZETRN). The primary purpose for the development of the transport suite is to provide a means for the spacecraft design community to rapidly perform numerous repetitive calculations essential for electron, proton and heavy ion radiation exposure assessments in complex space structures. In this paper, the radiation environment of the Galilean satellite Europa is used as a representative boundary condition to show the capabilities of the transport suite. While the transport suite can directly access the output electron spectra of the Jovian environment as generated by the Jet Propulsion Laboratory (JPL) Galileo Interim Radiation Electron (GIRE) model of 2003; for the sake of relevance to the upcoming Europa Jupiter System Mission (EJSM), the 105 days at Europa mission fluence energy spectra provided by JPL is used to produce the corresponding dose-depth curve in silicon behind an aluminum shield of 100 mils ( 0.7 g/sq cm). The transport suite can also accept ray-traced thickness files from a computer-aided design (CAD) package and calculate the total ionizing dose (TID) at a specific target point. In that regard, using a low-fidelity CAD model of the Galileo probe, the transport suite was verified by comparing with Monte Carlo (MC) simulations for orbits JOI--J35 of the Galileo extended mission (1996-2001). For the upcoming EJSM mission with a potential launch date of 2020, the transport suite is used to compute the traditional aluminum-silicon dose-depth calculation as a standard shield-target combination output, as well as the shielding response of high charge (Z) shields such as tantalum (Ta). Finally, a shield optimization algorithm is used to guide the instrument designer with the choice of graded-Z shield analysis.
Norman, Ryan B.↗
Cosmic ray antiproton and positron production in the interstellar medium
We have calculated the energy spectra of cosmic ray secondary antiprotons and positrons using the latest available data on inclusive reactions. Using the measured positron spectrum, we have found that the amount of matter traversed by the cosmic rays in the few GeV region to be 4.7 (+ or - 1.5) g/sq cm of interstellar hydrogen. The computed antiproton to proton ratio is about .0004 for energies 5-10 GeV. This is sufficient to make observations of antiprotons feasible from balloon flights. We have also pointed out the type of information that can be obtained if accurate information of the spectra of these two components becomes available.
Badhwar, G. D.↗
The X-ray spectrum of the BL Lacertae object PKS 0548-322
X-ray observations of H0548-322 = PKS 0548-322 at energies from 0.15 keV to 24 keV with the HEAO A-2 experiment are reported. The spectrum shows a distinct break in slope near 2 keV, with the indices of power-law energy spectra of 2.2 below and 0.3 above this break. A synchrotron self-Compton model is consistent with radio, optical, and all X-ray data, although a modified synchrotron self-Compton model with added thermal origin for the low-energy X-ray spectrum is also plausible.
Riegler, G. R.↗
The solar wind interaction with Mars as seen by the Viking retarding potential analyzers
Both energy spectra and continuous monitoring periods of the total flux above 15 eV are available, from Viking retarding potential analyzer measurements of electron fluxes not exceeding 75 eV out to 16,000 km above the Mars surface. Although the mean electron current at energies above 15 eV increases monotonically by almost two orders of magnitude from 9000 to 700 km in Viking 1 data, no clear signature of the bow shock is seen. Total current wave power shows a peak near 1700 km altitude. It is suggested that there may be a highly turbulent shock structure masking a clear signature of the bow shock in the time-averaged data, and it is concluded that the interaction model consistent with the bow shock at 1700 km, together with ionosphere measurements, indicates a permanent magnetic field able to stand off the solar wind during the Viking 1 entry.
Cragin, B. L.↗
Sputtering of UF4 by high energy heavy ions
The sputtering of UF4 targets by energetic beams of O-16, F-19, and Cl-35 ions has been investigated for beam energies in the range 0.12 to 1.5 MeV/amu. The sputtering yields, which follow the same trend as the electronic part of the projectile energy loss in the material, are observed to have a strong dependence on the charge state of the incident ions. Data have been taken both in transmission and reflection (0 and 180 deg to the incident beam direction, respectively). Energy spectra of the neutral sputtered particles have been obtained for 5 MeV F-19 ions and for 13 MeV Cl-35 ions; in both cases the spectrum has a Maxwellian form. The data obtained are compared with several models of the high energy sputtering process.
Meins, C. K.↗
The ATIC Experiment: First Balloon Flight
The Advanced Thin Ionization Calorimeter (ATIC) Balloon Experiment had its maiden, test, flight from McMurdo, Antarctica 28/12/00 to 13/01/01, local time, recording over 360 hours of data. ATIC was designed to measure the composition and energy spectra of cosmic rays from approximately 10 GeV to near 100 TeV utilizing a Si-matrix detector to determine charge in conjunction with a scintillator hodoscope which measures charge and trajectory. Cosmic rays that interact in a Carbon target have their energy determined from the shower that develops within a fully active calorimeter composed of a stack of scintillating BGO crystals. ATIC's geometry factor is about 0.25 m**2-sr. During line-of-sight operations much of the datastream was transmitted to the ground. For most of the flight, the data was recorded on-board, yielding 45 GB of flight data for analysis. The payload construction, operations and in-flight performance are described, along with preliminary results from the on-going analysis.
Wefel, J. P.↗
ATIC Experiment: Elemental Spectra from the Flight in 2000
The Advanced Thin Ionization Calorimeter (ATIC) had successful Long Duration Balloon flights from McMurdo, Antarctica in both 2000 and 2002. The instrument consists of a silicon matrix charge detector, a 0.75 nuclear interaction length graphite target, 3 scintillator strip hodoscopes, and an 18 radiation length thick BGO calorimeter to measure the cosmic ray composition and energy spectra from approximately 30 GeV to near 100 TeV. In this paper, we present preliminary results from the first flight, which was a test flight that lasted for 16 days, starting on 12/28/00.
Ahn, H. S.↗
Observations of nuclei heavier than iron in the primary cosmic radiation
Charge and energy spectra of primary cosmic rays made with large area Cerenkov scintillation counter on baloon flights - heavier than iron nuclei
SPECTRAL ENERGY DISTRIBUTION↗
Photonuclear Physics in SCALE
Radiation shielding modeling involves a wide range of applications, such as power reactors, critical experiments, portable sources, linear accelerators, and fusion systems. Particle energy ranges vary from thermal energies to fast energy spectra. MAVRIC, as the radiation shielding sequence of the SCALE code system [1] developed and maintained by Oak Ridge National Laboratory, is capable of modeling both neutron and photon interactions in matter and is widely used by the US Nuclear Regulatory Commission, Department of Energy, the National Nuclear Security Administration, and radiation shielding practitioners all around the world. Although most applications don’t involve highly energetic photons that can cause photonuclear reactions and create coupled chains of high energy, ionized electrons and bremsstrahlung radiation within a material medium, when present, these reactions can have a significant impact upon the downstream particle fluxes from incident photons above 20 MeV. For example, linear accelerators used for medical isotope production are examples of applications in which high-energetic photons are generated and used for driving or controlling other components of a complex facility. Radiation shielding analyses of such a facility would require accounting for any and all significant sources of radiation. Unfortunately, MAVRIC included no data and methods to model either photonuclear reactions or the bremsstrahlung photons until this work, which enabled accounting for both. Photonuclear reaction cross sections were imported from the Evaluated Nuclear Data File libraries, and corresponding methods were implemented in the SCALE code system; see Section 2 for how the nuclear data are imported and used. Bremsstrahlung photons were modeled by assuming thick-target approximation whereby all generated electrons and positrons due to photon interactions are assumed to be absorbed within the same material in which they were born, yielding a quick particle transport simulation method by using fast lookup tables for generating subsequent gammas; see Section 4 for details. A suite of verification models was used to test implemented methods and associated data. Tests yielded satisfactory results for the new features. Enhancements will be released as part of the next major SCALE release (v7.0), which is anticipated to be deployed in 2025, with beta releases available in the interim.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗