SEARCH · Engineering Papers

Results for “Doubling method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS2018

The Effect of Thin Film Adhesives on Mode I Interlaminar Fracture Toughness in Carbon Fiber Composites with Shape Memory Alloy Inserts

Shape Memory Alloy (SMA) was placed within Polymer Matrix Composite (PMC) panels alongside film adhesives to examine bonding. Double cantilever beam (DCB) testing was performed using ASTM D5528. C-scanning was performed before testing, modal acoustic emissions (MAE) were monitored during testing, and microscopy performed post-test. Data was analyzed using modified beam theory (MBT), compliance calibration (CC) and modified compliance calibration (MCC) methods. Fracture toughness for control specimens was higher than previously reported due to fiber-bridging. Specimens with SMAs and adhesives stabilized crack propagation. Results revealed SMA-bridging; a phenomenon mimicking fiber-bridging which increased the load and fracture toughness of SMA specimens.

Derek J Quade↗

NASA NTRS1976

Implementation of an experimental fault-tolerant memory system

The experimental fault-tolerant memory system described in this paper has been designed to enable the modular addition of spares, to validate the theoretical fault-secure and self-testing properties of the translator/corrector, to provide a basis for experiments using the new testing and correction processes for recovery, and to determine the practicality of such systems. The hardware design and implementation are described, together with methods of fault insertion. The hardware/software interface, including a restricted single error correction/double error detection (SEC/DED) code, is specified. Procedures are carefully described which, (1) test for specified physical faults, (2) ensure that single error corrections are not miscorrections due to triple faults, and (3) enable recovery from double errors.

Carter, W. C.↗

NASA NTRS1981

On the shape and orientation control of an orbiting shallow spherical shell structure

A proposed method for controlling the shape and orientation of very large shallow dish type receiver/reflectors to be used in communication, radiometry and in electronic orbital based mail systems involves connecting a rigid light weight dumbell with heavy tip masses to the shell at its apex by a spring loaded double gimballed joint with dampling. To completely damp the system transient motion in all of the important lower frequency modes, an active control system is required. A mathematical model is extended to include the effects of point actuators located at preselected positions on the shell surface. The formulation of the uncontrolled dynamics assumes an a priori knowledge of the frequencies of all the elastic modes to be incorporated within the system model. As an example, three rigid body modes and six elastic modes are included in the model and six actuators are assumed, none of which lies on a nodal line or circle.

Bainum, P. M.↗

NASA NTRS1989

Computation of rarefied hypersonic flows

Numerical techniques for the simulation of hypersonic flows of rarefied gases are examined in an analytical review. The direct-simulation Monte Carlo (DSMC) method developed to interpret measurement data obtained by the Space Shuttle in the SUMS project is described; the fundamental limitations of the DMSC approach are discussed; and modifications to improve the physical plausibility of DSMC predictions are proposed. Particular attention is given to the use of a double-peaked molecular distribution function for the internal flow in the SUMS probe, a downstream vacuum-reservoir condition as a simplifying assumption, and an explicit forward-time centered-space differencing scheme for the discretization of the SUMS problem. Typical simulation results are presented in extensive graphs and briefly characterized.

Cheng, Sin-I↗

NASA NTRS1997

ROSAT X-Ray Observation of the Second Error Box for SGR 1900+14

The positions of the two error boxes for the soft gamma repeater (SGR) 1900+14 were determined by the "network synthesis" method, which employs observations by the Ulysses gamma-ray burst and CGRO BATSE instruments. The location of the first error box has been observed at optical, infrared, and X-ray wavelengths, resulting in the discovery of a ROSAT X-ray point source and a curious double infrared source. We have recently used the ROSAT HRI to observe the second error box to complete the counterpart search. A total of six X-ray sources were identified within the field of view. None of them falls within the network synthesis error box, and a 3 sigma upper limit to any X-ray counterpart was estimated to be 6.35 x 10(exp -14) ergs/sq cm/s. The closest source is approximately 3 min. away, and has an estimated unabsorbed flux of 1.5 x 10(exp -12) ergs/sq cm/s. Unlike the first error box, there is no supernova remnant near the second error box. The closest one, G43.9+1.6, lies approximately 2.dg6 away. For these reasons, we believe that the first error box is more likely to be the correct one.

Li, P.↗

NASA NTRS2000

Cell birth, cell death, cell diversity and DNA breaks: how do they all fit together?

Substantial death of migrating and differentiating neurons occurs within the developing CNS of mice that are deficient in genes required for repair of double-stranded DNA breaks. These findings suggest that large-scale, yet previously unrecognized, double-stranded DNA breaks occur normally in early postmitotic and differentiating neurons. Moreover, they imply that cell death occurs if the breaks are not repaired. The cause and natural function of such breaks remains a mystery; however, their occurrence has significant implications. They might be detected by histological methods that are sensitive to DNA fragmentation and mistakenly interpreted to indicate cell death when no relationship exists. In a broader context, there is now renewed speculation that DNA recombination might be occurring during neuronal development, similar to DNA recombination in developing lymphocytes. If this is true, the target gene(s) of recombination and their significance remain to be determined.

NASA Discipline Cell Biology↗

NASA NTRS2010

Single-Receiver GPS Phase Bias Resolution

Existing software has been modified to yield the benefits of integer fixed double-differenced GPS-phased ambiguities when processing data from a single GPS receiver with no access to any other GPS receiver data. When the double-differenced combination of phase biases can be fixed reliably, a significant improvement in solution accuracy is obtained. This innovation uses a large global set of GPS receivers (40 to 80 receivers) to solve for the GPS satellite orbits and clocks (along with any other parameters). In this process, integer ambiguities are fixed and information on the ambiguity constraints is saved. For each GPS transmitter/receiver pair, the process saves the arc start and stop times, the wide-lane average value for the arc, the standard deviation of the wide lane, and the dual-frequency phase bias after bias fixing for the arc. The second step of the process uses the orbit and clock information, the bias information from the global solution, and only data from the single receiver to resolve double-differenced phase combinations. It is called "resolved" instead of "fixed" because constraints are introduced into the problem with a finite data weight to better account for possible errors. A receiver in orbit has much shorter continuous passes of data than a receiver fixed to the Earth. The method has parameters to account for this. In particular, differences in drifting wide-lane values must be handled differently. The first step of the process is automated, using two JPL software sets, Longarc and Gipsy-Oasis. The resulting orbit/clock and bias information files are posted on anonymous ftp for use by any licensed Gipsy-Oasis user. The second step is implemented in the Gipsy-Oasis executable, gd2p.pl, which automates the entire process, including fetching the information from anonymous ftp

Bertiger, William I.↗

NASA NTRS1989

Monte Carlo computations of F-region incoherent radar spectra at high latitudes and the use of a simple method for non-Maxwellian spectral calculations

Monte Carlo simulations of ion velocity distributions in the high-latitude F region have been performed in order to improve the calculation of incoherent radar spectra in the auroral ionosphere. The results confirm that when the ion temperature becomes large due to frictional heating in the presence of collisions with the neutral background constituent, F region spectra evolve from a normal double hump, to a triple hump, to a spectrum with a single maximum. An empirical approach is developed to overcome the inadequacy of the Maxwellian assumption for the case of radar aspect angles of between 30 and 70 deg.

Kikuchi, K.↗

NASA NTRS1972

Determination of Burgers vectors in close-packed metals using g.b = 2 contrast.

Reexamination of dislocation images giving double contrast in the electron microscope for g.b = 2 as a possible means for Burgers vector determinations. In fcc foils which have been cut parallel to an active slip plane, the g.b = 2 criterion provides a quick positive Burgers vector analysis which can be carried out during observation. The method is also applicable to basal dislocations in hcp. A comparison between calculated two-beam profiles and experimental images in aluminum is discussed, and several commonly observed characteristics of g.b = 2 contrast are described.

Kestenbach, H.-J.↗

NASA NTRS1988

Direct simulation of three-dimensional hypersonic flow about intersecting blunt wedges

The general three-dimensional direct simulation Monte Carlo method is used to study the hypersonic flow around two blunt wedges that intersect at a 90 deg angle. Results are obtained for the transitional flow regimes found at 85 and 100 km altitude with a reentry velocity of 7.5 km/s. The disturbance field in front of the double-wedge body is found to be larger than that produced by a single wedge. Surface pressures and flow densities are higher near the wedge intersection, whereas surface heating and shear streses are greater at locations removed from the corner. Results also show that three-dimensional flow structure occurs only near the wedge corner, and that the flow monotonically approaches the limiting two-dimensional wedge flow case in the spanwise direction.

Celenligil, M. Cevdet↗

NASA NTRS1990

Crystal-melt interface shape of Czochralski-grown large diameter germanium crystals

Crystal-melt interface shapes of 100 to 200 mm diameter 111-line Ge grown by the Czochralski technique have been examined using the method of fast withdrawal from the melt. Initially, the interface shape is convex, then transforms gradually into a sigmoidal shape, becomes nearly planar at about one third of the final crystal length, and finally assumes a concave profile with progressively increasing curvature. The nearly planar interface has a double-facet structure, with an annular facet at the edge of the crystal in addition to the central (111) facet. Formation of the annular facet is accompanied by a giant oscillation of the pull rate when the maximum average pull rate is exceeded. Such oscillation is detrimental to crystal quality, since it introduces a region of high dislocation density. An average pull rate maximum of 2 cm/h has been found to allow for a smooth growth of 200 mm diameter crystals. The origin of the pull rate perturbation is discussed in terms of an instantaneous change in the equilibrium shape of the meniscus.

Roth, M.↗

NASA NTRS2003

Estimation of Instantaneous TOA Albedo at 670 nm over Ice Clouds from POLDER Multidirectional Measurements

An algorithm that determines the 670-nm top-of-atmosphere (TOA) albedo of ice clouds over ocean using Polarization and Directionality of the Earth's Reflectance ( POLDER) multidirectional measurements is developed. A plane-parallel layer of ice cloud with various optical thicknesses and light scattering phase functions is assumed. For simplicity, we use a double Henyey-Greenstein phase function to approximate the volume-averaged phase function of the ice clouds. A multidirectional reflectance best-fit match between theoretical and POLDER reflectances is used to infer effective cloud optical thickness, phase function and TOA albedo. Sensitivity tests show that while the method does not provide accurate independent retrievals of effective cloud optical depth and phase function, TOA albedo retrievals are accurate to within similar to 3% for both a single layer of ice clouds or a multilayer system of ice clouds and water clouds. When the method is applied to POLDER measurements and retrieved albedos are compared with albedos based on empirical angular distribution models (ADMs), zonal albedo differences are generally smaller than similar to 3%. When albedos are compared with those on the POLDER-I ERB and Cloud product, the differences can reach similar to 15% at small solar zenith angles.

Sun, W.↗

NASA NTRS1980

Feasibility and cost study on VOIR SAR data transfer via a bent pipe link

An INTELSAT/DOMSAT double hop bent pipe link for the Venus orbiting imaging radar synthetic aperture radar imaging data transfer from deep space stations 43 and 63 to the Jet Propulsion Laboratory was investigated. The cost for the bent pipe transfer was estimated and compared to that for the planned tape record/airfreight-the-tape transfer method.

Park, Y. H.↗

NASA NTRS2010

Simulated Service and Stress Corrosion Cracking Testing for Friction Stir Welded Spun Formed Domes

Simulated service testing (SST) development was required to help qualify a new 2195 aluminum lithium (Al-Li) alloy spin forming dome fabrication process for the National Aeronautics and Space Administration (NASA) Exploration Development Technology Program. The application for the technology is to produce high strength low weight tank components for NASA s next generation launch vehicles. Since plate material is not currently manufactured large enough to fabricate these domes, two plates are joined by means of friction stir welding. The plates are then pre-contour machined to near final thicknesses allowing for a thicker weld land and anticipating the level of stretch induced by the spin forming process. The welded plates are then placed in a spin forming tool and hot stretched using a trace method producing incremental contours. Finally the dome receives a room temperature contour stretch to final dimensions, heat treatment, quenching, and artificial aging to emulate a T-8 condition of temper. Stress corrosion cracking (SCC) tests were also performed by alternate immersion in a sodium chloride (NaCl) solution using the typical double beam assembly and with 4-point loaded specimens and use of bent-beam stress-corrosion test specimens under alternate immersion conditions. In addition, experiments were conducted to determine the threshold stress intensity factor for SCC (K(sub ISCC)) which to our knowledge has not been determined previously for Al-Li 2195 alloy. The successful simulated service and stress corrosion testing helped to provide confidence to continue to Ares 1 scale dome fabrication

Stewart, Thomas J.↗

NASA NTRS2005

Near-Field Acoustical Characterization of Clustered Rocket Engines

This paper presents an approach for the prediction and characterization of the near-field acoustic levels from closely-spaced clustered rocket engines. The calculations are based on the method proposed by Eldred, wherein the flowfield from the clustered rockets is divided into two zones. Zone 1 contains the isolated nozzles which produce noise independently, and extends up to a distance where the individual flows completely mix to form an equivalent single nozzle flow. Zone 2 is occupied by the single mixed stream starting from the station where the jets merge. The acoustic fields from the two zones are computed separately on the basis of the NASA-SP method of Eldred developed for a single equivalent nozzle. A summation of the spectra for the two zones yields the total effective sound pressure level for the clustered engines. Under certain conditions of nozzle spacing and flow parameters, the combined sound pressure level spectrum for the clustered nozzles displays a double peak. Test cases are presented here to demonstrate the importance of hydrodynamic interactions responsible for the double peak in the sound spectrum in the case of clustered rocket nozzles, and the role of ground reflections in the case of non-interfering jets. A graphics interface (Rocket Acoustic Prediction Tool) has been developed to take into account the effects of clustered nozzles and ground reflections.

Kandula, Max↗

NASA NTRSDate not supplied

Surviving and Thriving in Space and on Earth's Oceans, Human Logistics and Sustainability: Comparisons and Considerations

Ocean exploration sailing journeys from hundreds of years ago typically required large vessels and large crews (in comparison with today’s space capsules) to travel between the continents and around the world. Modern sailors of today are able to complete similar distant voyages, in small vessels, with a minimal crew, comparable in size to modern space travel crews. This paper uses a systems engineering approach (e.g. using the NASA Human Integration Design Handbook (HIDH), NASA-SP-2010-3407, 2010 and the “Advanced Life Support Baseline Values and Assumptions Document, (BVAD)” NASA-CR-2004-208941, 2004.), to examine and compare the logistics and sustainability aspects of a small crew traveling on Earth's oceans in sailing vessels versus humans traveling in space. The “Mālama Honua Worldwide Voyage” of the Hōkūleʻa, a replica of an ancient Hawaiian double hulled sailing canoe, will be used as a baseline minimalist case study. This is a good comparison case since the Polynesian exploration of the vast (and virtually empty) Pacific Ocean with limited resources is an analogue to human space travel. A modern sailboat is compared to the ancient Polynesian methods and then a space craft is assessed with similar functional decomposition methods. In 1992 during his second Space Shuttle mission (STS-52, Columbia) Astronaut Lacy Veach received a radio message from a student: "What are the similarities and differences between canoe and space travel?" Astronaut Charles Lacy Veach answered, "Both are voyages of exploration. Hōkūle‘a is in the past, Columbia is in the future." Navigator Nainoa Thompson added from the sailing canoe, "Columbia is the highest achievement of modern technology today, a voyaging canoe was the highest achievement of technology in its day." This paper is dedicated to the memory of two great Hawaiian astronauts: US Air Force Colonel Charles Lacy Veach and US Air Force Colonel Ellison Onizuka and to legendary waterman and Hōkūleʻa crew member Eddie Aikau who was lost at sea in 1978, at the beginning of a 30-day, 2,500-mile (4,000km) journey by the Hōkūleʻa to follow the ancient route of the Polynesian migration between the Hawaiian and Tahitian island chains.

Robert P Mueller↗

NASA NTRS1985

Monte Carlo simulation of a new gamma ray telescope

A new Monte Carlo code has been written to simulate the response of the new University of California double scatter gamma ray telescope. This package of modular software routines, written in VAX FORTRAN 77 simulates the detection of 0.1 to 35 MeV gamma rays. The new telescope is flown from high altitude balloons to measure medium energy gamma radiation from astronomical sources. This paper presents (1) the basic physics methods in the code, and (2) the predicted response functions of the telescope. Gamma ray processes include Compton scattering, pair production and photoelectric absorption in plastic scintillator, NaI(Tl) and aluminum. Electron transport processes include ionization energy loss, multiple scattering, production of bremsstrahlung photons and positron annihilation.

Simone, J.↗

NASA NTRS1989

Computational and experimental evaluation of helicopter rotor tips for high speed forward flight

A computational and experimental method for the evaluation of helicopter rotor tips in high-speed forward flight is presented which uses an unsteady full-potential solver on the advancing side of the rotor disk. Forces and moments measured during angle-of-attack sweeps reveal the soft-stall phenomenon of the double-swept planforms as well as the delayed stall of the single-swept hyperbolic tip. Double-swept planforms are shown to exhibit the most favorable performance, creating counter-rotating vortices that augment the lifting capabilities of the blade at high angles of attack and delay the onset of stall.

Sigl, Dave↗