To Fluorinate or Not to Fluorinate in Organic Solar Cells: Achieving a Higher PCE of 15.2% when the
Explore the source record for details and available documents.
Wu, Jianglin↗
SEARCH · Engineering Papers
Results for “Dissociation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Highly Active and Durable Air Electrodes for Reversible Protonic Ceramic Electrochemical Cells Enabled by an Efficient Bifunctional Catalyst
The commercialization of reversible protonic ceramic electrochemical cells is hindered by the lack of highly active and durable air electrodes exposed to high concentration of steam under operating conditions. We report findings that dramatically enhance the electrocatalytic activity and stability of a conventional (La 0.6 Sr 0.4 ) 0.95 Co 0.2 Fe 0.8 O 3-δ (LSCF) air electrode by a multiphase catalyst coating composed of a conformal Pr 1-x Ba x CoO 3-δ thin film and exsolved BaCoO 3-δ nanoparticles, are reported. At 600 °C, the catalyst coating decreases the polarization resistance of the LSCF air electrode by a factor of 25 (from 1.09 to 0.043 Ω cm 2 ) in air and the degradation rate by two orders of magnitude (from 1.0 × 10 -2 to 1.8 × 10 -4 Ω cm2 h -1 in humidified air with 30 vol% H2O). Further, a single cell with the catalyst-coated LSCF air electrode at 600 °C demonstrates a high peak power density of 1.04 W cm -2 in the fuel cell mode and a high current density of 1.82 A cm -2 at 1.3 V in the electrolysis mode. The significantly enhanced performance of the LSCF air electrode is attributed mainly to the high rate of surface oxygen exchange, fast surface proton diffusion, and the rapid H 2 O and O 2 dissociation on the catalysts.
36 MATERIALS SCIENCE↗
Novel Co‐Catalytic Activities of Solid and Liquid Phase Catalysts in High‐Rate Li‐Air Batteries
Abstract Li‐air batteries are considered strong candidates for the next‐generation energy storage systems designed for electrical transportation. However, low cyclability and current rates are two major drawbacks that hinder them from further realization. These issues necessitate the discovery of novel materials to significantly enhance the redox process of discharge products. In this study, a novel catalytic system comprised of tin sulfide (SnS) nanoflakes as a solid catalyst and tin iodide (SnI 2 ) as a dual‐functional electrolyte additive is discovered. This system enables operating the battery at high current rates up to 10 000 mA g −1 (corresponding to 1 mA cm −2 ). The SnS catalyst shows outstanding catalytic activity for both oxygen reduction and evolution reactions compared to carbon, noble metals, and other transition metal dichalcogenides. It also exhibits good structural integrity at high rates. The computations indicate numerous possible oxygen reduction sites without oxygen dissociations on the SnS surface through solution mechanism that is likely responsible for the formation of Li 2 O 2 . The calculations also indicate that the role of the SnI 2 is not only reacting with the lithium anode to provide protection but reducing the charge potential by promoting catalytic decomposition of the Li 2 O 2 . This work provides new novel additives for designing high‐rate Li‐air batteries.
25 ENERGY STORAGE↗
A High Potential, Low Capacity Fade Rate Iron Complex Posolyte for Aqueous Organic Flow Batteries
An iron complex, tris(4,4'-bis(hydroxymethyl)-2,2'-bipyridine) iron dichloride is reported, which operates at near-neutral pH with a redox potential of 0.985 V versus SHE. This high potential compound is employed in the posolyte of an aqueous flow battery, paired with bis(3-trimethylammonio)propyl viologen tetrachloride in the negolyte, exhibiting an open-circuit voltage of 1.3 V at near-neutral pH. It demonstrates excellent cycling performance with a low temporal capacity fade rate of 0.07% per day over 35 days of cycling. The extended cycling lifetime is the result of low permeability and improved structural stability of the newly developed iron complex compared to that of the iron tris(bipyridine) complex. The combination of high redox potential and low capacity fade rate compares favorably with those of all previously demonstrated organic and organometallic aqueous posolytes. Extensive investigation into the possible degradation mechanisms, including post-mortem chemical and electrochemical analyses, indicates that stepwise ligand dissociations of the iron complex are responsible for the reported capacity loss during cell cycling. Further, this investigation provides unprecedented insight to guide further improvements of such metalorganic compounds for energy storage and conversion applications.
25 ENERGY STORAGE↗
Designing Electrolytes With Controlled Solvation Structure for Fast‐Charging Lithium‐Ion Batteries
Recharging battery-powered electric vehicles (EVs) in a similar timeframe as those used for refueling gas-powered internal combustion vehicles is highly desirable for rapid penetration of the EV market. It is well known that the electrolyte in a battery plays a critical role in fast-charging capability of the battery because it determines the rate of ion transport together with its derived electrode/electrolyte interphases on both cathode and anode of the battery. In this study, the effects of contents of salt, coordinating solvent, and noncoordinating diluent on salt dissociation degree and electrolyte ionic conductivity are investigated, and a controlled solvation structure electrolyte is developed to improve the lithium ion mobility and conductivity in the electrolyte and to enhance the kinetics and stability of the electrode/electrolyte interphases in the battery. This electrolyte enables fast-charging capability of high energy density lithium-ion batteries (LIBs) at up to 5 C rate (12-min charging), which significantly outperforms the state-of-the-art electrolyte. The controlled solvation structure sheds light on the future electrolyte design for fast-charging LIBs.
25 ENERGY STORAGE↗
Bulk‐Heterojunction Electrocatalysts in Confined Geometry Boosting Stable, Acid/Alkaline‐Universal Water Electrolysis
Abstract Alkaline water splitting electrocatalysts have been studied for decades; however, many difficulties remain for commercialization, such as sluggish hydrogen evolution reaction (HER) kinetics and poor catalytic stability. Herein, by mimicking the bulk‐heterojunction morphology of conventional organic solar cells, a uniform 10 nm scale nanocube is reported that consists of subnanometer‐scale heterointerfaces between transition metal phosphides and oxides, which serves as an alkaline water splitting electrocatalyst; showing great performance and stability toward HER and oxygen evolution reaction (OER). Interestingly, the nanocube electrocatalyst reveals acid/alkaline independency from the synergistic effect of electrochemical HER (cobalt phosphide) and thermochemical water dissociation (cobalt oxide). From the spray coating process, nanocube electrocatalyst spreads uniformly on large scale (≈6.6 × 5.6 cm 2 ) and is applied to alkaline water electrolyzers, stably delivering 600 mA cm −2 current for >100 h. The photovoltaic‐electrochemical (PV‐EC) system, including silicon PV cells, achieves 11.5% solar‐to‐hydrogen (STH) efficiency stably for >100 h.
Chemistry↗
Molecular Precision Engineering for Efficient Binary Organic Photovoltaics through Energy Level and Fibrillar Structure Modulation
Adjusting the energy levels and fibrillar morphology is paramount to enhancing the power conversion efficiency (PCE) of organic solar cells (OSCs). In the present study, an increase in the open-circuit voltage (VOC) is facilitated through the elongation of the alkyl chain within AQx (namely AQx-8), aiming to decrease the free volume ratio (FVR). This reduction in FVR attenuates electron-phonon coupling, thereby augmenting emission efficiency and diminishing the non-radiative energy loss (ΔEnr). To further refine the energy levels and morphological characteristics, the external undecyl chain of AQx-8 is substituted with a shorter carbon chain and cyclohexane noted for its considerable steric hindrance (AQx-H). Additionally, this alteration significantly mitigates intermolecular aggregation, expands the bandgap, and elevates the lowest unoccupied molecular orbital (LUMO) energy level, culminating in an elevated VOC of 0.923 V in devices based on AQx-H. Morphological analysis reveals that blends based on AQx-H exhibit an enhanced multi-length-scale fibrillar structure, which is conducive to exciton dissociation and charge transport, thereby contributing to a high fill factor (FF) nearing 80%. Consequently, this study reports one of the highest binary PCEs documented, standing at 19.5% (with certification at 19.0%).
14 SOLAR ENERGY↗
Regulation of Side‐Chain Symmetry for Delaying Triplet Formation and Suppressing Non‐Radiative Loss in Organic Solar Cells
Abstract The structural revolutions of non‐fullerene acceptors (NFAs) have driven continuous efficiency breakthroughs in organic solar cells (OSCs). Rational regulation of NFA structures toward efficient exciton dissociation and mitigated non‐radiative recombination is pivotal for OSCs. The incorporation of asymmetric side chains on NFAs can often achieve these goals by inducing a desirable aggregate state. However, it lacks the studies to directly correlate the side‐chain symmetry of NFAs with the exciton delocalization and triplet dynamics in OSCs. Herein, The influence of structural symmetry on the aggregate properties is systematically investigated and exciton/charge dynamics based on two developed biaxial‐conjugated NFAs with varied side‐chain symmetry. The symmetric NFA having diverse molecular packing orientations can form multiple charge transfer channels in its blend with polymer donor, which cannot be found in that comprising the asymmetric ones. Moreover, a slower rate and lower ratio of the spin‐triplet state are formed in the blend of symmetric NFA, resulting in a much lower non‐radiative voltage loss in corresponding OSCs. This study reveals the distinct advantages of symmetric NFAs in both aggregate properties and exciton/charge dynamics over those of asymmetric ones, paving the way for developing high‐performance OSCs using easier‐to‐prepare, low‐cost symmetric materials.
Chemistry↗
Novel Zwitterionic Polyurethane-in-Salt Electrolytes with High Ion Conductivity, Elasticity, and Adhesion for High-Performance Solid-State Lithium Metal Batteries
This study presents a novel polymer-in-salt (PIS) zwitterionic polyurethane-based solid polymer electrolyte (zPU-SPE) that offers high ionic conductivity, strong interaction with electrodes, and excellent mechanical and electrochemical stabilities, making it promising for high-performance all solid-state lithium batteries (ASSLBs). The zPU-SPE exhibits remarkable lithium-ion (Li+) conductivity (3.7 × 10⁻⁴ S cm−1 at 25 °C), enabled by exceptionally high salt loading of up to 90 wt.% (12.6 molar ratio of Li salt to polymer unit) without phase separation. It addresses the limitations of conventional SPEs by combining high ionic conductivity with a Li+ transference number of 0.44, achieved through the incorporation of zwitterionic groups that enhance ion dissociation and transport. The high surface energy (338.4 J m−2) and elasticity ensure excellent adhesion to Li anodes, reducing interfacial resistance and ensuring uniform Li+ flux. When tested in Li||zPU||LiFePO₄ and Li||zPU||S/C cells, the zPU-SPE demonstrated remarkable cycling stability, retaining 76% capacity after 2000 cycles with the LiFePO4 cathode, and achieving 84% capacity retention after 300 cycles with the S/C cathode. Molecular simulations and a range of experimental characterizations confirm the superior structural organization of the zPU matrix, contributing to its outstanding electrochemical performance. The findings strongly suggest that zPU-SPE is a promising candidate for next-generation ASSLBs.
Wang, Kun↗
Achieving 20.1% Efficiency in Organic Solar Cells Through Interconnected Fibrillar Networks via Local Molecular Stacking
ABSTRACT The performance of organic solar cells (OSCs) is governed by how molecular packing evolves into interconnected networks that facilitate exciton dissociation and charge transport. Using an all‐small‐molecule blend DR3TSBDT:Y6 as a model system, we study how local molecular stacking evolves into performance‐relevant morphology during solvent vapor annealing (SVA) and subsequent thermal annealing (TA). SVA promotes end‐to‐end stacking of amorphous acceptors to form interconnected fibrils, while TA compacts inter‐fibril spacing without disrupting favorable local order. Such molecular‐to‐morphological refinements broaden light absorption, enhance charge transport, and markedly improve device efficiency. Extending this approach to additional blend systems (D18:Y6, D18:L8‐BO, and DR3TSBDT:L8‐BO) yields similar structural evolution and performance gains, with the D18:L8‐BO system achieving up to 20.10% PCE. Our study establishes control over local stacking in amorphous acceptors into fibrillar networks as a general and effective route to realize high‐performance OSCs.
Wu, Junying↗
Understanding initial zeolite oligomerization steps with first principles calculations
Zeolites are porous aluminosilicate materials that find various applications in the chemical industry in separations, catalysis, ion exchange, and so forth. However, despite their widespread use, the reaction mechanisms occurring during zeolite growth are still unclear. In the study, we use density functional theory calculations to gain insights into the thermodynamics of oligomerization, which constitute the initial steps of zeolite growth. By taking into consideration solvent and temperature effects, our results demonstrate that the growth of aluminosilicate systems is significantly more exothermic than their pure silicate counterparts. Under pH neutral conditions, water prefers to dissociate on the early-growth-stage aluminosilicate complexes rather than desorb, thus generating potential Brønsted acid sites on the oligomers. Additionally, (alumino)silicate growth pathways are evaluated in the presence of Na + cation, as well as the Ca 2+ cation for the pure silicate pathway. The presence of cations increases the exothermicity of growth, with Ca 2+ exhibiting the most energetically favorable growth environment for the silicate systems. Importantly, we demonstrate through reaction extent analysis that the presence of cations modulates the speciation of the formed oligomers, with Na + favoring linear species in addition to the generally preferred cyclic ones. Overall, this work provides a fundamental understanding of the thermodynamics of complex reaction paths that occur during early stages of zeolite growth and suggests that the initial growth steps can have significant impact on the final zeolite structure.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Copper‐Catalyzed Dehydrogenative Amidation of Light Alkanes
Abstract The functionalization of C−H bonds in light alkanes, particularly to form C−N bonds, remains a challenge. We report the dehydrogenative coupling of amides with C1–C4 hydrocarbons to form N‐alkyl amide products with tBuOOtBu as oxidant, and a copper complex of a phenanthroline‐type ligand as catalyst. The reactions occurred in good yields in benzene or supercritical carbon dioxide as solvents. This strategy allowed for the determination of the relative reactivity of these alkane C−H bonds toward this amination process and showed, in contrast to prior work with larger alkanes, that the reactivity correlated with bond dissociation energies.
Fuentes, M. Ángeles↗
Responsive Interfacial Assemblies Based on Charge‐Transfer Interactions
Abstract Charge transfer (CT) interactions have been widely used to construct supramolecular systems, such as functional nanostructures and gels. However, to date, there is no report on the generation of CT complexes at the liquid–liquid interface. Here, by using an electron‐deficient acceptor dissolved in water and an electron‐rich donor dissolved in oil, we present the in situ formation and assembly of CT complex surfactants (CTCSs) at the oil–water interface. With time, CTCSs can assemble into higher‐order nanofilms with exceptional mechanical properties, allowing the stabilization of liquids and offering the possibility to structure liquids into nonequilibrium shapes. Moreover, due to the redox‐responsiveness of the electron‐deficient acceptor, the association and dissociation of CTCSs can be reversibly manipulated in a redox process, leading to the switchable assembly and disassembly of the resultant constructs.
Sun, Shuyi↗
The Assembly and Jamming of Nanoparticle Surfactants at Liquid–Liquid Interfaces
Abstract Using the interactions between nanoparticles (NPs) and polymeric ligands to generate nanoparticle surfactants (NPSs) at the liquid–liquid interface, the binding energy of the NP to the interface can be significantly increased, irreversibly binding the NPSs to the interface. By designing a simplified NPS model, where the NP size can be precisely controlled and the characteristic fluorescence of the NPs be used as a direct probe of their spatial distribution, we provide new insights into the attachment mechanism of NPSs at the liquid–liquid interface. We find that the binding energy of NPSs to the interface can be reduced by competitive ligands, resulting in the dissociation and disassembly of NPSs at the interface, and allowing the construction of responsive, reconfigurable all‐liquid systems. Smaller NPSs that are loosely packed (unjammed) and irreversibly bound to the interface can be displaced by larger NPSs, giving rise to a size‐dependent assembly of NPSs at the interface. However, when the smaller size NPSs are densely packed and jam at the interface, the size‐dependent assembly of NPSs at the interface can be completely suppressed.
Wang, Beibei↗
From Copper to Basic Copper Carbonate: A Reversible Conversion Cathode in Aqueous Anion Batteries
Abstract Dual‐ion batteries that use anions and cations as charge carriers represent a promising energy‐storage technology. However, an uncharted area is to explore transition metals as electrodes to host carbonate in conversion reactions. Here we report the reversible conversion reaction from copper to Cu 2 CO 3 (OH) 2 , where the copper electrode comprising K 2 CO 3 and KOH solid is self‐sufficient with anion‐charge carriers. This electrode dissociates and associates K + ions during battery charge and discharge. The copper active mass and the anion‐bearing cathode exhibit a reversible capacity of 664 mAh g −1 and 299 mAh g −1 , respectively, and relatively stable cycling in a saturated mixture electrolyte of K 2 CO 3 and KOH. The results open an avenue to use carbonate as a charge carrier for batteries to serve for the consumption and storage of CO 2 .
Gallagher, Trenton C.↗
Formation of Organic Acids and Carbonyl Compounds in n ‐Butane Oxidation via γ‐Ketohydroperoxide Decomposition
Abstract A crucial chain‐branching step in autoignition is the decomposition of ketohydroperoxides (KHP) to form an oxy radical and OH. Other pathways compete with chain‐branching, such as “Korcek” dissociation of γ‐KHP to a carbonyl and an acid. Here we characterize the formation of a γ‐KHP and its decomposition to formic acid+acetone products from observations of n ‐butane oxidation in two complementary experiments. In jet‐stirred reactor measurements, KHP is observed above 590 K. The KHP concentration decreases with increasing temperature, whereas formic acid and acetone products increase. Observation of characteristic isotopologs acetone‐ d 3 and formic acid‐ d 0 in the oxidation of CH 3 CD 2 CD 2 CH 3 is consistent with a Korcek mechanism. In laser‐initiated oxidation experiments of n ‐butane, formic acid and acetone are produced on the timescale of KHP removal. Modelling the time‐resolved production of formic acid provides an estimated upper limit of 2 s −1 for the rate coefficient of KHP decomposition to formic acid+acetone.
Popolan‐Vaida, Denisia M.↗
When Is a Bond Broken? The Polarizability Perspective.
Abstract The question of when a chemical bond can be said to be broken is of fundamental chemical interest but has not been widely studied. Herein we propose that the maxima of static polarizability along bond dissociation coordinates naturally define cutoff points for bond rupture, as they represent the onset of localization of shared electron density into constituent fragments. Examples of computed polarizability maxima over the course of bond cleavage in main‐group and transition metal compounds are provided, across covalent, dative and charge‐shift bonds. The behavior along reaction paths is also considered. Overall, the static polarizability is found to be a sensitive reporter of electronic structure reorganization associated with bond stretching, and thus can serve as a metric for describing bond cleavage (or diagnose the absence of a chemical bond).
Hait, Diptarka↗
Copper‐Catalyzed Dehydrogenative Amidation of Light Alkanes
Abstract The functionalization of C−H bonds in light alkanes, particularly to form C−N bonds, remains a challenge. We report the dehydrogenative coupling of amides with C1–C4 hydrocarbons to form N‐alkyl amide products with tBuOOtBu as oxidant, and a copper complex of a phenanthroline‐type ligand as catalyst. The reactions occurred in good yields in benzene or supercritical carbon dioxide as solvents. This strategy allowed for the determination of the relative reactivity of these alkane C−H bonds toward this amination process and showed, in contrast to prior work with larger alkanes, that the reactivity correlated with bond dissociation energies.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗