Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Application of computer-aided aircraft design in a multidisciplinary environment.

Applications of a multidisciplinary system of computer programs to selected analytical and optimization problems encountered in an aircraft design are described. The depth of the analyses and optimizations permits such detailed output as individual stringer sizes and pressure distributions. Data flow from one program to another is performed in a hands-off manner in the modular and open-ended system. Numerical examples show how this automation permits multidisciplinary trade-off studies, typical of a preliminary design process to be based on such a level of detail in each discipline that normally would not be available at this stage of the process.

Fulton, R. E.↗
NASA NTRS1974

Two-phase choked flow of subcooled nitrogen through a slit

Two-phase choked flow rate and pressure distribution data are reported for subcooled nitrogen flowing through a slit. The slip was a narrow rectangular passage of equal length and width. The inlet stagnation pressure ranged from slightly above saturation to twice the thermodynamic critical pressure. Four stagnation isotherms were investigated covering a range which spanned the critical temperature. The results suggested a uniform two-phase flow pattern with vaporization occurring at or near the exit in most cases. The results compared favorably with the theory of Henry for nonequilibrium subcooled two-phase choked flow in long tubes.

Simoneau, R. J.↗
NASA NTRS1974

Two-phase choked flow of subcooled nitrogen through a slit

Two-phase choked flow rate and pressure distribution data are reported for subcooled nitrogen flowing through a slit. The slit was a narrow rectangular passage of equal length and width. The inlet stagnation pressure ranged from slightly above saturation to twice the thermodynamic critical pressure. Four stagnation isotherms were investigated, covering a range which spanned the critical temperature. The results suggested a uniform two-phase flow pattern with vaporization occurring at or near the exit in most cases. The results compared favorably with the theory of Henry (1970) for nonequilibrium subcooled two-phase choked flow in long tubes.

Simoneau, R. J.↗
NASA NTRS1975

Digital computer programs for generating oblique orthographic projections and contour plots

User and programer documentation is presented for two programs for automatic plotting of digital data. One of the programs generates oblique orthographic projections of three-dimensional numerical models and the other program generates contour plots of data distributed in an arbitrary planar region. A general description of the computational algorithms, user instructions, and complete listings of the programs is given. Several plots are included to illustrate various program options, and a single example is described to facilitate learning the use of the programs.

Giles, G. L.↗
NASA NTRS1974

The Synchronous Meteorological Satellite /SMS/ system

The Synchronous Meteorological Satellite (SMS) system is described which is being utilized in a program to obtain day and night information on the earth's weather by means of earth imaging, retransmission of imaged data, meteorological data collection and relay, and space environment monitoring. The components and functions of the ground system are discussed together with the basic satellite payloads. The launch and orbit of SMS-A are reviewed, and the functions of the visible IR spin-scan radiometer are described in detail. Other systems and units discussed include the data collection system, solar environment monitor, weather-facsimile unit, and central data distribution system. It is noted that SMS-A was used to support the Global Atlantic Tropical Experiment and that the SMS system will be complemented by geostationary environmental satellites from ESRO, Japan, and the USSR.

Fordyce, D. V.↗
NASA NTRS1976

Lunar motion analysis and laser data management

Work completed in lunar motion analysis and laser data management during the period July 1, 1971 - September 30, 1975 was reported. In this context, analysis refers to theoretical or numerical studies involving real or potential applications of such observations to improvement of the physical model, and data management refers to the process by which observed photon events are turned into observations and are made available to potential users. The data analysis work included: (1) bringing to operational status of computer programs for the numerical integration of the lunar orbit motion and for the application of lunar laser time delays for the improvement of the parameters of the physical model, (2) program improvement and program integrity, (3) three-dimensional ephemeris, and (4) miscellaneous independent studies. The data management work included: (1) data identification, (2) observatory interfaces, and (3) data distribution.

Mulholland, J. D.↗
NASA NTRS1976

Pressure distributions for a rectangular supersonic inlet at subsonic speeds

Pressure distribution data are provided for a supersonic rectangular inlet at subsonic speeds. Variations in cowl and ramp geometry as well as sideplate sweep were investigated. Tests were made in the Langley 16-foot transonic tunnel and the Langley high speed 7- by 10-foot tunnel for Mach numbers of 0.6, 0.7, and 0.8. Angles of attack investigated were 0 deg, 4 deg, and 8 deg for a range of mass flow ratios.

Fuller, D. E.↗
NASA NTRS1976

Closed cycle MHD power generation experiments using a helium-cesium working fluid in the NASA Lewis Facility

The MHD channel in the NASA Lewis Research Center was redesigned and used in closed cycle power generation experiments with a helium-cesium working fluid. The cross sectional dimensions of the channel were reduced to 5 by 16.5 cm to allow operation over a variety of conditions. Experiments have been run at temperatures of 1900-2100 K and Mach numbers from 0.3 to 0.55 in argon and 0.2 in helium. Improvements in Hall voltage isolation and seed vaporization techniques have resulted in significant improvements in performance. Typical values obtained with helium are Faraday open circuit voltage 141 V (92% of uBh) at a magnetic field strength of 1.7 T, power outputs of 2.2 kw for tests with 28 electrodes and 2.1 kw for tests with 17 electrodes. Power densities of 0.6 MW/cu m and Hall fields of about 1100 V/m were obtained in the tests with 17 electrodes, representing a factor of 18 improvement over previously reported results. The V-I curves and current distribution data indicate that while near ideal equilibrium performance is obtained under some conditions, no nonequilibrium power has been generated to date.

Sovie, R. J.↗
NASA NTRS1977

New directions in space electronics

Five new directions in space electronics are defined to yield improvements over present means: automated operations aimed at a tenfold reduction in mission support costs, precision pointing and control, efficient data acquisition to permit the tenfold increase in information collection needed for global coverage, real-time data management, and low-cost data distribution to allow a thousand-fold increase in information availability and space-systems effectiveness. Technological developments and resources for each of the new directions are derived from space-technology and space-theme workshops. One to two order of magnitude improvements in instrument pointing stability will be necessary for Shuttle and planetary payloads of the 1980s. Low-cost user terminals will involve technological addressing both near-term and long-term applications. NASA has reoriented its research and technology-base programs to support the goals represented by the new directions in space electronics. Numerous charts and schematic diagrams supplement the text.

Kurzhals, P. R.↗
NASA NTRS1977

Detection of anisotropy in the cosmic blackbody radiation

Anisotropy has been detected in the cosmic blackbody radiation with a 33-GHz (0.9 cm) twin-antenna Dicke radiometer flown to an altitude of 20 km aboard a U-2 aircraft. In data distributed over two-thirds of the Northern Hemisphere, an anisotropy is observed, which is well fitted by a first-order spherical harmonic with an amplitude of (3.5 plus or minus 0.6) x 10 to the -3rd deg K, and direction 11.0 plus or minus 0.6 h right ascension and 6 plus or minus 10 deg declination. This observation is readily interpreted as due to motion of the earth relative to the radiation with a velocity of 390 plus or minus 60 km/sec.

Smoot, G. F.↗
NASA NTRS1978

Mars topography harmonics and geophysical implications

The paper describes an improved model of Martian global topography which has been obtained by fitting a sixteenth-degree harmonic series to occultation, radar, spectral, and photogrammetric measurements. Empirical elevation data based on photographic data are used to supplement the observations in areas without data. Values for the mean radius, the mean density, and the displacement of the center of the figure from the center of mass are presented. The reported geometric flattening is too great and the reported dynamic flattening is too small for Mars to be homogeneous and hydrostatic. Maps of the data distribution, global topography, and Bouguer gravity anomaly are interpreted in terms of a crustal thickness map which is consistent with gravity, topography, and recent preliminary Viking seismic results.

Bills, B. G.↗
NASA NTRS1976

OAST Space Theme Workshop. Volume 3: Working group summary. 2: Data handling, communications (E-2). A. Statement. B. Technology needs (form 1). C. Priority assessment (form 2)

Technologies required to support the stated OAST thrust to increase information return by X1000, while reducing costs by a factor of 10 are identified. The most significant driver is the need for an overall end-to-end data system management technology. Maximum use of LSI component technology and trade-offs between hardware and software are manifest in most all considerations of technology needs. By far, the greatest need for data handling technology was identified for the space Exploration and Global Services themes. Major advances are needed in NASA's ability to provide cost effective mass reduction of space data, and automated assessment of earth looking imagery, with a concomitant reduction in cost per useful bit. A combined approach embodying end-to-end system analysis, with onboard data set selection, onboard data processing, highly parallel image processing (both ground and space), low cost, high capacity memories, and low cost user data distribution systems would be necessary.

Source record↗
NASA NTRS1979

Airframe noise component interaction studies

Acoustic wind tunnel tests were conducted of a two-dimensional wing section with removable high-lift leading and trailing edge devices and a removeable two-wheel landing gear with open cavity. An array of far field conventional microphones and an acoustic mirror directional microphone were utilized to determine far field spectrum levels and noise source distribution. Data were obtained for the wing with components deployed separately and in various combinations. The basic wing model had 0.305 m (1.00 ft) chord, which is roughly 1/10 scale for a one-hundred passenger transport airplane. Most of the data were obtained at 70.7 and 100 m/sec (232 and 328 ft/sec) airspeeds, which bracket the range of practical approach speeds for such aircraft. Data were obtained at frequence to 40 kHz so that, when scaled to s typical full-airframe, the frequency region which strongly influences preceived noise level would be included.

Fink, M. R.↗
NASA NTRS1978

The NASA End-to-End Data System program

NASA has embarked on the NASA End-to-End Data System (NEEDS) program, the objective of which is to improve effectiveness and efficiency of NASA's data/information management system. Technology gaps and bottlenecks in the end-to-end system, which encompasses acquiring data, processing it, and converting it to useful information, will be identified. Technology development activities addressing these problem areas will be carried out and new technology will be implemented. Phase I, started in 1977, addresses some very near-term data handling and processing problems with the development of some subsystem components. Phase II, with a late 1978 start, will concentrate on complete subsystems developments to effect near real-time data management. Potential future phases are projected to revolve around the themes of low cost data distribution and a full system demonstration.

Price, R. D.↗
NASA NTRS1978

Information systems

Space-derived information is the principal product of our civilian space program. Associated data from earth-orbital and planetary spacecraft will exceed the equivalent of some 500 television pictures per second during the 1980's. Cost-effective management of this data flood requires a new look at NASA's overall information systems. Advanced technologies being pursued by industry and NASA could provide order-of-magnitude reductions in data-handling costs and times to permit a massive increase in the use of space-acquired data for both individual and national needs. This paper discusses attendant thrusts in efficient data acquisition, instrument pointing, real-time data management, and low-cost data distribution. Current and planned technology activities in these areas and their anticipated impact on future space missions are described.

Kurzhals, P. R.↗
NASA NTRS1979

Electric fields and secondary emission near a dielectric-metal interface

Dielectric surface-charge distributions near a metal-dielectric interface in vacuum depend upon secondary emission processes in the presence of normal and tangential components of electric field. From measured charge distributions created by exposing a specimen of fluorinated ethylene-propylene to monoenergetic electron fluxes, it has been possible to calculate potentials and fields on and near the dielectric surface. The effect of the normal electric field upon secondary emission is measured directly, and the effect of the tangential field is inferred from the charge-distribution data. The critical point (unity crossover) for secondary emission is shifted by the application of fields, so that it occurs at much higher primary energies than normally. Primary beams having energies up to 20 keV are used, and surface fields are as high as 20 kV/mm.

Robinson, J. W.↗
NASA NTRS1979

Polar motion from laser range measurements of GEOS-3

Using two-day arcs of GEOS-3 laser data, simultaneous solutions for pole position components, x sub p and y sub p, and orbit elements have been obtained for the period spanning 3 February to 6 March 1976 using three NASA Goddard Space Flight Center laser stations located near Washington, D.C. (STALAS) and on the islands of Bermuda and Grand Turk. The results are in general agreement with the BIH results. However, because of the locations of the laser sites, the x sub p solution is weaker than the y sub p solution. The x sub p and y sub p estimates were smoothed with a straight line by weighted least squares using the variance associated with the pole estimates as weights in order to reflect the effect of widely different data distributions. The smoothed y sub p differs by one meter with respect to the BIH smoothed values and the smoothed x sub p differs by about two meters. Spectral analysis of the results has identified frequencies associated with the orbital motion indicating the need for further improvements in the model of the physical system.

Schutz, B. E.↗
NASA NTRS1979

Analytic modeling of aerosol size distributions

Mathematical functions commonly used for representing aerosol size distributions are studied parametrically. Methods for obtaining best fit estimates of the parameters are described. A catalog of graphical plots depicting the parametric behavior of the functions is presented along with procedures for obtaining analytical representations of size distribution data by visual matching of the data with one of the plots. Examples of fitting the same data with equal accuracy by more than one analytic model are also given.

Deepack, A.↗