Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Conversion System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Preliminary studies on the heat exchanger option for S-CO{sub 2} power conversion cycle coupled to water cooled SMR

For more than a half century, the steam Rankine cycle had been the major power conversion cycle for a nuclear power plant. However, as the interest on the next generation reactors grows, a variety of alternative power conversion systems have been studied. Among them, the S-CO{sub 2} cycle (Supercritical carbon dioxide Brayton cycle) is considered as a promising candidate due to several benefits such as 1) Relatively high thermal efficiency at relatively low turbine inlet temperature, 2) High efficiency with simple lay-out 3) Compactness of turbo-machineries. 4) Compactness of total cycle combined with PCHE (Printed Circuit Heat Exchanger). According to the conventional classification of heat exchangers (HE), there are three kind of HE, 1) Tubular HEs, 2) Plate-type HEs, 3) Extended surface HEs. So far, the researcher has mostly assumed PCHE type HE for the S-CO{sub 2} cycle due to its compactness with reasonably low pressure drop. However, PCHE is currently one of the most expensive components in the cycle, which can have a negative effect on the economics of the cycle. Therefore, an alternative for the HE should be seriously investigated. By comparing the operating condition (pressure and temperature) there are three kind of HE in the S-CO{sub 2} cycle, 1) IHX (Intermediate Heat exchanger) 2) Recuperator and 3) Pre-cooler. In each heat exchanger, hot side and cold side coolants are different, i.e. reactor coolant to S-CO{sub 2} (IHX), S-CO{sub 2} to S-CO{sub 2}(Recuperator), S-CO{sub 2} to water (Pre-cooler). By considering all the attributes mentioned above, all existing types of heat exchangers are compared to find a possible alternative to PCHE. The comparing factors are 1) Size(volume), 2) Cost. Plate fin type HEs are considered to be the most competitive heat exchanger regarding the size and the cost after some improvements on the design limit are made. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

NASA Acoustic Stirling IRAD Thermal Recovery Energy Efficient System (TREES) Energy Conversion and Management in Aircraft

NASA Acoustic Stirling IRAD (Internal Research and Development) Thermal Recovery Energy Efficient System (TREES) Energy Conversion and Management in Aircraft. Presentation on energy conversion on aircraft. Thermal energy recovery changes aircraft thermal management from being a necessary burden on aircraft performance to a desirable asset. It improves the engine performance by recycling waste heat and ultimately rejecting all collected aircraft heat out through the engine nozzle.

Dyson, Rodger↗

Enhancing Oxygen Reduction Activity and Cr Tolerance of Solid Oxide Fuel Cell Cathodes by a Multiphase Catalyst Coating

Intermediate temperature solid oxide fuel cells (IT-SOFCs) are cost-effective and efficient energy conversion systems. Here, the sluggish oxygen reduction reaction (ORR) and the degradation of cathodes are critical challenges to the commercialization of IT-SOFCs. Here, a highly efficient multiphase (MP) catalyst coating, consisting of Ba 1–x Co 0.7 Fe 0.2 Nb 0.1 O 3–δ (BCFN) and BaCO 3 , to enhance the ORR activity and durability of the state-of-the-art lanthanum strontium cobalt ferrite (La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3–δ , LSCF) cathode is reported. The conformal MP catalyst-coated LSCF cathode shows a polarization resistance (R p ) of 0.048 Ω cm 2 at 650 °C, about one order of magnitude smaller than that of the bare LSCF. In an accelerated Cr-poisoning test, the degradation rate of the catalyst-coated LSCF electrode is 10 –3 Ω cm 2 h –1 (0.59% h –1 ) over 200 h, only one fifth of the degradation rate of the bare LSCF electrode at 750 °C. In addition, anode-supported single cells with the MP catalyst-coated LSCF cathode show a dramatically enhanced peak power density (1.4 W cm –2 vs 0.67 W cm –2 at 750 °C) and increased durability against Cr and H 2 O. Both experimental results and density functional theory-based calculations indicate that the BCFN phase improves the ORR activity while the BaCO 3 phase enhances the stability of the LSCF cathode.

solid oxide fuel cells↗

Enhancing Metal‐Support Interactions of Ru Catalysts via Relaxation of Oxygen Vacancies for Hydrogen Production

The stability of Ru-based catalysts under harsh electrochemical conditions is a critical challenge limiting their practical application in energy conversion systems. In this study, Ru catalysts supported on ZrO 2-x , CeO 2-x , and ZrCeO 2-x are synthesized via pyrolysis of metal-organic frameworks (MOFs) and systematically evaluated to elucidate the role of support interactions on catalytic performance and durability. Advanced characterization techniques, including HR-TEM, XRD, XPS, and EXAFS, revealed that Ru-ZrCeO 2-x exhibited superior structural stability compared to Ru-ZrO 2-x and Ru-CeO 2-x , particularly under high-potential sweep (HPS) conditions. The incorporation of Ce into ZrO 2-x is shown to stabilize oxygen vacancies and enhance the interaction between Ru catalyst and the support, thereby mitigating catalyst degradation. Density functional theory (DFT) calculations further confirmed that Ce doping decreases formation energy of the oxygen vacancy, providing a thermodynamically favorable environment for Ru stabilization. This work demonstrates the promise of ZrCeO 2-x as a robust support material for Ru-based catalysts, advancing their potential for durable and efficient energy applications.

hydrogen evolution reaction↗

Single‐Step Deformation Processing of Ultrathin Lithium Foil and Strip

Abstract Next‐generation, high‐efficiency energy storage and conversion systems require development of lithium metal batteries. But the high cost of production and constraints on thickness of lithium (anode) foils continue to limit adoption for integration into battery cell architectures. Here, a novel lithium anode manufacturing solution is demonstrated – single‐step production of ultrathin gauge foil formats directly from solid ingot. Hybrid cutting‐based deformation processes, involving large plastic strains and strain rates, produce foil to sub‐10 µm thickness, with surface quality even superior to present Li anode processing routes. Energy analysis shows the single‐stage processing is ≈50% more efficient than conventional processing by extrusion‐rolling. Through in situ force measurements and high‐speed imaging of the cutting it also characterize – for the first time – the flow stress of Li to strain rates of 800 sec −1 , revealing a power‐law relationship. The results present a paradigm shift in manufacturing and integration of solid lithium anodes for energy applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Fabrication of Sub-Micrometer-Thick Solid Electrolyte Membranes of β-Li 3 PS 4 via Tiled Assembly of Nanoscale, Plate-Like Building Blocks

Here solid electrolytes represent a critical component in future batteries that provide higher energy and power densities than the current lithium-ion batteries. The potential of using ultrathin films is among the best merits of solid electrolytes for considerably reducing the weight and volume of each battery unit, thereby significantly enhancing the energy density. However, it is challenging to fabricate ultrathin membranes of solid electrolytes using the conventional techniques. Here, a new strategy is reported for fabricating sub-micrometer-thick membranes of β-Li 3 PS 4 solid electrolytes via tiled assembly of shape-controlled, nanoscale building blocks. This strategy relies on facile, low-cost, solution-based chemistry to create membranes with tunable thicknesses. The ultrathin membranes of β-Li 3 PS 4 show desirable ionic conductivity and necessary compatibility with metallic lithium anodes. The results of this study also highlight a viable strategy for creating ultrathin, dense solid electrolytes with high ionic conductivities for the next-generation energy storage and conversion systems.

25 ENERGY STORAGE↗

Rational Design of Hierarchically Open-Porous Spherical Hybrid Architectures for Lithium Ion Batteries

Controlling the internal microstructure and overall morphology of building blocks used to form hybrid materials is crucial for the realization of deterministically designed architectures with desirable properties. Here, we demonstrate an integrative spray-frozen (SF) assembly for forming hierarchically structured open-porous microspheres (hpMSs) composed of Fe 3 O 4 and reduced graphene oxide (rGO). The SF process drives the formation of a radially-aligned microstructure within the sprayed colloidal droplets and also controls the overall microsphere morphology. The Fe 3 O 4 /rGO hpMSs contain interconnected open-pores and spherical morphology, which, when used as a lithium-ion battery anode, enables then to provide gravimetric and volumetric capacities of 1069.7 mAh g -1 and 686.7 mAh cm -3 , much greater than those of samples with similar composition and different morphologies. The hpMSs have good rate and cycling performances, retaining 78.5% from 100 to 1000 mA g -1 and 74.6% over 300 cycles. Using in-situ synchrotron x-ray absorption spectroscopy, the reaction pathway and phase evolution of the hpMSs are monitored observing the very small domain size and highly disordered nature of Fe x O y . Here, the reduced capacity fading relative to other conversion systems is due to the good electrical contact between the pulverized Fe x O y particles and rGO, the overall structural integrity of the hpMSs, and interconnected openporosity.

25 ENERGY STORAGE↗

Impact of Advances in Anion Exchange Membranes and Ionomers on Alkaline Fuel Cells

Abstract The operation of low‐temperature electrochemical energy conversion systems (fuel cells, electrolyzers) at high pH values is of perennial interest due to the possibility of moving away from expensive platinum group metal catalysts and reducing cost. Historically, the anion exchange membranes (AEMs) and ionomers have been hampered by performance (ionic conductivity, mechanical strength) and chemical stability issues. In this context, select developments over the past decade in alternate AEM chemistries, water management methods, and production of membrane electrode assemblies (MEAs) that have enabled a significant leap in performance of alkaline fuel cells are examined. These developments are linked to performance improvements in alkaline H 2 /O 2 fuel cells and also consider developments in alkaline fuel cells using nitrogen‐containing fuels (ammonia, hydrazine), carbon‐containing fuels (alcohols, glycols), and boron‐containing fuels (sodium borohydride, ammonia borane). Finally, current challenges and bottlenecks are identified, and potential solutions are proposed.

Chemistry↗

When small is big: the role of impurities in electrocatalysis.

Improvements in the fundamental understanding of electrocatalysis have started to revolutionize the development of electrochemical interfaces for the efficient conversion of chemical energy into electricity, as well as for the utilization of electrons to produce new chemicals that then can be re-used in energy conversion systems. Here, some facets of the role of trace level of impurities (from 10-7 to 10-6 M) in electrocatalysis of the oxygen reduction reaction, hydrogen oxidation and evolution reactions, and CO oxidation reactions are explored on well-characterized platinum single crystal surfaces and high surface area materials in alkaline and acidic environments. Of particular interest is the effect of anions (e.g., Cl-, NO3-) and cations (i.e., Cu2+) present in the supporting electrolytes as well as surface defects (i.e., ad-islands) that are present on metal surfaces. The examples presented are chosen to demonstrate that a small level of impurities may play a crucial role in governing the reactivity of electrochemical interfaces.

Strmcnik, Dusan↗

Wear Mechanisms in Contacts Involving Slippers in Axial Piston Pumps: A Multi-Technical Analysis

Axial piston pumps are widely used in actuation as power conversion systems, especially in aeronautics. Even though they combine compactness and efficiency, wear of their parts reduces their lifespan. Studies on these pumps often consist in analytic or numerical analyses of lubricated contact between their components. Piston slippers are in tribological contacts with swashplate, pistons and slipper retainer. This study aims to understand wear mechanisms in the contacts involving this central component. An experimental multi-technical analysis of helicopter pumps parts after several functioning times is presented. To determine wear mechanisms, worn surfaces are observed with SEM. 3D surface roughness measurements provide surface topography. Contact conditions and consequently wear severity and mechanisms differ from one contact to another. Detached coarse carbides from the swashplate surface act as an abrading third-body against slippers and swashplate. Debris generated in this contact is carried by the fluid to the other contacts. Although pistons are made of the same steel as swashplate, there is no carbide detachment and wear comes from debris polluting the fluid. Slipper retainer is almost not worn, and debris causes abrasive wear and craters generation in the slippers.

36 MATERIALS SCIENCE↗

Benchmarking sensor fusion capabilities of an integrated instrumentation package

Quantifying and mitigating environmental risks introduced by marine energy conversion systems requires a variety of sensors (active acoustic, passive acoustic, and optical). The operation of these sensors must satisfy three directives to be effective: (1) do not alter the environment through operation of sensors; (2) capture rare events; and (3) do not accrue unmanageable volumes of low-value data. This requires integrating sensors into a single package, rather than operating them independently. The Adaptable Monitoring Package is an integrated instrumentation package that combines a multibeam sonar, acoustic camera, current profiler, optical cameras, and an array of hydrophones. The capabilities and limitations of the AMP sensors were benchmarked using cooperative targets, and real-time target tracking and detection was used to detect opportunistic targets (e.g., diving birds, seals). During an initial deployment, automatic detection of opportunistic targets achieved a 58% true positive rate and a 99% true negative rate (100% corresponding to an ideal system in both cases). In post-processing, target tracking data were used to evaluate automatic target classification capabilities using a k-nearest neighbor algorithm. Findings suggest that real-time target classification should be possible and enable integrated instrumentation systems to meet the monitoring needs of marine energy deployments.

16 TIDAL AND WAVE POWER↗

Coupling metal oxide nanoparticle catalysts for water oxidation to molecular light absorbers

Water oxidation, as a mandatory reaction of solar fuels conversion systems, requires the use of light absorbers with electronic properties that are well matched with those of the multi-electron catalyst in order to achieve high efficiency. Molecular light absorbers offer flexibility in fine tuning of orbital energetics, and metal oxide nanoparticles have emerged as robust oxygen evolving catalysts. These material choices offer a promising approach for the development of photocatalytic systems for water oxidation. However, efficient charge transfer coupling of molecular light absorbers and metal oxide nanoparticle catalysts has proven a challenge. Recent new approaches toward the efficient coupling of these components based on synthetic design improvements combined with direct spectroscopic observation and kinetic evaluation of charge transfer processes are discussed in this paper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bridgman growth of large-aperture yttrium calcium oxyborate crystal

Highlights: ► YCOB is a novel non-linear optical crystal possessing good thermal, mechanical and nonlinear optical properties. ► Large size crystal growth is key technology question for YCOB crystal. ► YCOB crystals 3 in. in diameter were grown with modified vertical Bridgman method. ► It is a more effective growth method to obtain large size and high quality YCOB crystal. -- Abstract: Large-aperture yttrium calcium oxyborate YCa{sub 4}O(BO{sub 3}){sub 3} (YCOB) crystals with 3 in. in diameter were grown with modified vertical Bridgman method, and the large crystal plate (63 mm × 68 mm × 20 mm) was harvested for high-average power frequency conversion system. The crack, facet growth and spiral growth can be effectively controlled in the as-grown crystal, and Bridgman method displays more effective in obtain large size and high quality YCOB crystal plate than Czochralski technique.

36 MATERIALS SCIENCE↗

Are CO2 batteries ready for the grid? A cross-cutting deployment checklist

Metal-CO2 batteries have attracted considerable research interest in the past decade due to the utilization of the greenhouse CO2 gas. The low cost and abundance of CO2 feedstocks, together with high specific capacity metal anodes, make this technology a promising candidate for electricity-demanding data centers and grids. However, nonstandard data reporting, ambiguous hardware designs, and questionable cycling parameters have emerged as the field has grown. A clear checklist and standardized reporting format for research and development are urgently needed. Here, after carefully re-analyzing 15 Na-CO2 and 9 Li-CO2 studies, we propose a general checklist and a flowchart for CO2 batteries and related gas conversion systems. Specific performance values from a deployment-oriented perspective, based on commercial lithium iron phosphate batteries, are integrated into the list. We frame research and development efforts around grid-relevant outputs, including areal rate and capacity, cyclability, gas utilization, and safety. While illustrated for Na- and Li-CO2 cells, this framework is directly transferable to other CO2 batteries and air/oxygen batteries, helping align benchtop demonstrations with systematic metrics that ultimately govern future deployment.

Wu, Wenda [ORNL] (ORCID:000900033307687X)↗

Co-design of a wave energy converter through bi-conjugate impedance matching

As with other oscillatory power conversion systems, the design of wave energy converters can be understood as an impedance matching problem. By representing the wave energy converter as a multi-port network, two separate but related impedance matching conditions can be established. Satisfying these conditions maximizes power transfer to the load. In practice, these impedance matching conditions may be used to influence the design of the system (including the hull, power take-off, controller, mooring, etc.). To this end, this paper considers some example applications of wave energy converter design with the help of the impedance matching framework.

WEC↗

Fatigue and Creep-Fatigue Deformation of an Ultra-Fine Precipitate Strengthened Advanced Austenitic Alloy

An advanced austenitic alloy, HT-UPS (high-temperature ultrafine-precipitation-strengthened), has been identified as an ideal candidate material for the structural components of fast reactors and energy-conversion systems. HT-UPS alloys demonstrate improved creep resistance relative to 316 stainless steel (SS) through additions of Ti and Nb, which precipitate to form a widespread dispersion of stable nanoscale metallic carbide (MC) particles in the austenitic matrix. The low-cycle fatigue and creep-fatigue behavior of an HT-UPS alloy have been investigated at 650 °C and a 1.0% total strain, with an R-ratio of -1 and hold times at peak tensile strain as long as 150 min. The cyclic deformation response of HT-UPS is directly compared to that of standard 316 SS. The measured values for total cycles to failure are similar, despite differences in peak stress profiles and in qualitative observations of the deformed microstructures. Crack propagation is primarily transgranular in fatigue and creep-fatigue of both alloys at the investigated conditions. Internal grain boundary damage in the form of fine cracks resulting from the tensile hold is present for hold times of 60 min and longer, and substantially more internal cracks are quantifiable in 316 SS than in HT-UPS. The dislocation substructures observed in the deformed material differ significantly; an equiaxed cellular structure is observed in 316 SS, whereas in HT-UPS the microstructure takes the form of widespread and relatively homogenous tangles of dislocations pinned by the nanoscale MC precipitates. The significant effect of the fine distribution of precipitates on observed fatigue and creep-fatigue response is described in three distinct behavioral regions as it evolves with continued cycling.

36 MATERIALS SCIENCE↗

Thermal Hydraulic Challenges of Gas Cooled Fast Reactors with Passive Safety Features

Transient response of a Gas cooled Fast Reactor (GFR) coupled to a recompression supercritical CO2 (S-CO2) power conversion system (PCS) in a direct cycle to Loss of Coolant and Loss of Generator Load Accidents is analyzed using RELAP5-3D. A number of thermal hydraulic challenges for GFR design are pointed out as the designers strive to accommodate cooling of the high power density core of a fast reactor by a gas with its inherently low heat transfer capability, in particular under post LOCA events when system pressure is lost and when reliance on passive decay heat removal is emphasized. Although it is possible to design a S-CO2 cooled GFR that can survive LOCA by cooling the core through natural circulating loops between the core and elevated emergency cooling heat exchangers, it is not an attractive approach because of various bypass paths that can, depending on break location, degrade core cooling. Moreover, natural circulation gas loops can operate in deteriorated heat transfer regimes with substantial reduction of heat transfer coefficient: as low as 30% of forced convection values, and data and correlations in these regimes carry large uncertainties. Therefore, reliable battery powered blowers for post-LOCA decay heat removal (DHR) that provide flow in well defined regimes with low uncertainty, and can be easily over-designed to accommodate bypass flows were selected. The results confirm that a GFR with such a DHR system and negative coolant void worth can withstand LOCA with and without scram as well as loss of electrical load without exceeding core temperature and turbomachinery overspeed limits.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Combustion machine learning: Principles, progress and prospects

Progress in combustion science and engineering has led to the generation of large amounts of data from large-scale simulations, high-resolution experiments, and sensors. This corpus of data offers enormous opportunities for extracting new knowledge and insights—if harnessed effectively. Machine learning (ML) techniques have demonstrated remarkable success in data analytics, thus offering a new paradigm for data-intense analyses and scientific investigations through combustion machine learning (CombML). While data-driven methods are utilized in various combustion areas, recent advances in algorithmic developments, the accessibility of open-source software libraries, the availability of computational resources, and the abundance of data have together rendered ML techniques ubiquitous in scientific analysis and engineering. This article examines ML techniques for applications in combustion science and engineering. Starting with a review of sources of data, data-driven techniques, and concepts, we examine supervised, unsupervised, and semi-supervised ML methods. Various combustion examples are considered to illustrate and to evaluate these methods. Next, we review past and recent applications of ML approaches to problems in combustion, spanning fundamental combustion investigations, propulsion and energy-conversion systems, and fire and explosion hazards. Challenges unique to CombML are discussed and further opportunities are identified, focusing on interpretability, uncertainty quantification, robustness, consistency, creation and curation of benchmark data, and the augmentation of ML methods with prior combustion-domain knowledge.

33 ADVANCED PROPULSION SYSTEMS↗