Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Content Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Heterogeneity in Permeability and Particulate Organic Carbon Content Controls the Redox Condition of Riverbed Sediments at Different Timescales

Abstract The hydrological and biogeochemical properties of the hyporheic zone in stream and riverine ecosystems have been extensively studied over the past two decades. Although it is widely acknowledged that sediment heterogeneity can influence biogeochemical reactions, little effort has been made to understand the role of heterogeneity on the spatiotemporal variability of riverbed redox conditions under changing flow dynamics at different timescales. Here we integrate a mechanistic model and field data to demonstrate that heterogeneity in permeability plays a vital role in modulating sediment redox conditions at both seasonal (annual) and event (daily‐to‐weekly) timescales, whereas heterogeneity in particulate organic carbon (POC) content only has a comparable influence on redox conditions at the seasonal timescale. These findings underscore the importance of accurately characterizing sediment heterogeneity, in terms of permeability and POC content, in quantifying biogeochemical dynamics in the riverbed and hyporheic zones of riverine ecosystems.

Geology↗
DOE OSTI2024

Microbially mediated mechanisms underlie soil carbon accrual by conservation agriculture under decade-long warming

Increasing soil organic carbon (SOC) in croplands by switching from conventional to conservation management may be hampered by stimulated microbial decomposition under warming. Here, we test the interactive effects of agricultural management and warming on SOC persistence and underlying microbial mechanisms in a decade-long controlled experiment on a wheat-maize cropping system. Warming increased SOC content and accelerated fungal community temporal turnover under conservation agriculture (no tillage, chopped crop residue), but not under conventional agriculture (annual tillage, crop residue removed). Microbial carbon use efficiency (CUE) and growth increased linearly over time, with stronger positive warming effects after 5 years under conservation agriculture. According to structural equation models, these increases arose from greater carbon inputs from the crops, which indirectly controlled microbial CUE via changes in fungal communities. As a result, fungal necromass increased from 28 to 53%, emerging as the strongest predictor of SOC content. Collectively, our results demonstrate how management and climatic factors can interact to alter microbial community composition, physiology and functions and, in turn, SOC formation and accrual in croplands.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

In silico assessment of the potential of basalt amendments to reduce N 2 O emissions from bioenergy crops

Abstract The potential of large‐scale deployment of basalt to reduce N 2 O emissions from cultivated soils may contribute to climate stabilization beyond the CO 2 ‐removal effect from enhanced weathering. We used 3 years of field observations from maize ( Zea mays ) and miscanthus ( Miscanthus × giganteus ) to improve the nitrogen (N) module of the DayCent model and evaluate the potential of basalt amendments to reduce N losses and increase yields from two bioenergy crops. We found 20%–60% improvement in our N 2 O flux estimates over previous model descriptions. Model results predict that the application of basalt would reduce N 2 O emissions by 16% in maize and 9% in miscanthus. Lower N 2 O emissions responded to increases in the N 2 :N 2 O ratio of denitrification with basalt‐induced increases in soil pH, with minor contributions from the impact of P additions (a minor component of some basalts) on N immobilization. The larger reduction of N 2 O emissions in maize than in miscanthus was likely explained by a synergistic effect between soil pH and N content, leading to a higher sensitivity of the N 2 :N 2 O ratio to changes in pH in heavily fertilized maize. Basalt amendments led to modest increases in modeled yields and the nitrogen use efficiency (i.e., fertilizer‐N recover in crop production) of maize but did not affect the productivity of miscanthus. However, enhanced soil P availability maintained the long‐term productivity of crops with high nutrient requirements. The alleviation of plant P limitation led to enhanced plant N uptake, thereby contributing to lower microbial N availability and N 2 O emissions from crops with high nutrient requirements. Our results from the improved model suggest that the large‐scale deployment of basalt, by reducing N 2 O fluxes of cropping systems, could contribute to the sustainable intensification of agriculture and enhance the climate mitigation potential of bioenergy with carbon capture and storage strategies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Taxonomic and nutrient controls on phytoplankton iron quotas in the ocean

Abstract Phytoplankton iron contents (i.e., quotas) directly link biogeochemical cycles of iron and carbon and drive patterns of nutrient limitation, recycling, and export. Ocean biogeochemical models typically assume that iron quotas are either static or controlled by dissolved iron availability. We measured iron quotas in phytoplankton communities across nutrient gradients in the Pacific Ocean and found that quotas diverged significantly in taxon‐specific ways from laboratory‐derived predictions. Iron quotas varied 40‐fold across nutrient gradients, and nitrogen‐limitation allowed diatoms to accumulate fivefold more iron than co‐occurring flagellates even under low iron availability. Modeling indicates such “luxury” uptake is common in large regions of the low‐iron Pacific Ocean. Among diatoms, both pennate and centric genera accumulated luxury iron, but the cosmopolitan pennate genus Pseudo‐nitzschia maintained iron quotas 10‐fold higher than co‐occurring centric diatoms, likely due to enhanced iron storage. Biogeochemical models should account for taxonomic and macronutrient controls on phytoplankton iron quotas.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Chromium segregation-induced oxide evolution in Ni-10Cr alloys during high-temperature oxidation

The oxidation behavior of a Ni-10(wt%)Cr alloy under high-temperature O 2 conditions is investigated using transmission electron microscopy and first-principles calculations. Results reveal that chromium segregation plays a central role in driving the evolution of complex oxide phase structures during oxidation. At low Cr concentrations, Cr preferentially segregates to NiO grain boundaries or internal pores, substituting for Ni atoms and forming Ni(Cr)O solid solutions. As Cr content increases, enhanced diffusion promotes Cr penetration into the NiO lattice, leading to the formation of multiphase oxide structures. First-principles modeling corroborates these findings: at low Cr concentrations, Cr atoms favor surface and grain-boundary segregation, while higher concentrations lead to Cr aggregation within the NiO bulk. Furthermore, the integrated experimental-theoretical approach provides atomistic insights into Cr-mediated mass transport mechanisms during alloy oxidation and offers valuable guidance for controlling oxide growth kinetics and phase stability in Ni-Cr alloys, with implications for improving oxidation resistance in high-temperature structural applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of temperature on helium bubble behaviour in Fe–9Cr alloy

In the present study, Fe–9Cr model alloys were irradiated by 275 keV He + ions at 500 to 800 °C to a peak damage level and implanted helium content of 0.5 dpa and 0.75 at% He, respectively. Effects of temperature on He bubble behaviour were studied by transmission electron microscopy (TEM) to reveal the temperature effects. The bubble spatial distribution changes from homogenous at 500 and 600 °C to heterogeneous at 700 and 800 °C, due to preferential bubble precipitation on dislocations and grain boundaries at high temperature. Faceted bubbles with low energy faces along the {001} planes were present at all four temperatures and are attributed to surface energy minimization. Bubble precipitation on the GBs became more pronounced with increasing temperature. Meanwhile, the cavity swelling increased with increasing temperature, from 0.59% at 500 °C to 8.21% at 800 °C with a sharp increase above 700 °C. By analysing the temperature dependence of bubble size and density, a transition temperature between low and high temperature regimes was obtained in terms of different activation energies which are related to different bubble nucleation and formation mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Catalytic Triad-Inspired Nanozyme Catalysts for Ester Hydrolysis in Organic Solvent Mixtures

We synthesized a series of molecular nanozyme catalysts containing functional groups (imidazole, carboxylic acid, and hydroxyl groups) inspired by the catalytic triad found in natural serine hydrolases. Different structural features were incorporated using two distinct synthesis routes to investigate the influence of interactions beyond the active site on catalytic activity in designing molecular nanozymes. Molecular dynamics simulations suggest that nanozyme activity is affected by structural features that influence nanozyme hydrophilicity and the organization of the local solvent environment. The most active nanozyme showed activity comparable to the enzyme α-chymotrypsin for the hydrolysis of a model ester (4-nitrophenyl 4- hydroxybenzoate) in a 95:5 (v/v%) water/acetonitrile mixture at ambient temperature. Increasing the temperature and organic solvent content decreases the activity of α-chymotrypsin while enhancing the activity of the nanozymes. The nanozymes can be immobilized on supported metal nanoparticles using a dithiol self-assembled monolayer, which facilitates their removal from the postreaction solution. These results demonstrate the potential in creating solvent-tolerant bioinspired catalysts, thereby combining the advantages of biocatalysts and chemical catalysts as next-generation industrial catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhancing Hydrogen Production from Bioenergy Crops via Photoreforming

Photoreforming perennial bioenergy crops (willow, Miscanthus , and poplar) has the potential to produce H 2 with reduced environmental impacts. To understand the compositional effects of the biomass on the average rate of H 2 production over the first 30 min of reaction ( r H 2 ), the r H 2 values of model biomass component (i.e., cellulose, hemicellulose, and lignin) mixtures were compared with those from the raw biomass. The higher cellulose or hemicellulose content in multicomponent mixtures resulted in higher r H 2 , whereas lignin reduced the hydrogen production rate. However, with raw biomass, the ratio of biomass components alone did not determine the r H 2 via photoreforming, with rates of hydrogen production for different varieties of willow ranging between 1.9 μmol h -1 and 12.3 μmol h -1 , 11.8 μmol h -1 for a poplar, and 6.8 μmol h -1 for a miscanthus biomass. In addition, comparable r H 2 values of raw poplar and its extracted cellulose via an IonoSolv treatment indicated the possibility of using raw biomass materials without delignification for generating H 2 via photoreforming. Importantly, r H 2 was positively correlated with the interaction between water and the biomass, as assessed by NMR relaxation via an examination of the T 1 /T 2 ratio. A stronger water-biomass interaction resulted in a higher r H 2 . Genetic modification of biomass has been suggested as a putative way to improve the r H 2 of biomass with an enhanced interaction with water. This research enhances the understanding of factors influencing H 2 production from lignocellulosic biomass by photoreforming and supports the breeding and management of perennial biomass crops to maximize H 2 yields while minimizing land area requirements.

biomass↗
DOE OSTI2020

Chemically distinct regions of Venus’s atmosphere revealed by measured N 2 concentrations

A defining characteristic of the planet Venus is its thick, CO 2 -dominated atmosphere. Despite over 50 years of robotic exploration of Venus, including thirteen successful atmospheric probes and landers, our knowledge of N 2 , the second most abundant compound in the atmosphere, is highly uncertain. We report the first measurement of the nitrogen content of Venus’s atmosphere at altitudes between 60 and 100 km. Our result, 5.0 ± 0.4 v% N 2 , is 40% higher than the value of 3.5 v% N 2 reported for the lower atmosphere (<50 km altitude). Our discovery of altitude-dependent variations in the N 2 content of the atmosphere defies early expectations of homogeneous composition below 100 km (for example, see ref. 1), and necessitates complete chemical modelling to investigate chemical versus physical explanations for the enhanced N 2 in the upper atmosphere. Furthermore, the existence of chemically distinct lower and upper atmosphere regions complicates the use of remote sensing measurements of the upper atmosphere to infer the properties of the lower atmosphere and surface, an important lesson that also extends to the growing field of exoplanet astronomy.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

A thermochemical study of iron aluminate-based materials: a preferred class for isothermal water splitting

The use of hydrogen as a renewable fuel has been stymied by our inability to produce it cleanly and economically. The conventional solar thermochemical approach considers a two-step redox cycle with benchmark ceria or a perovskite in a temperature swing configuration, where reduction occurs at a temperature much higher than oxidation. Isothermal redox cycling is feasible and avoids the solid–solid heat recuperation and material stability challenges associated with temperature swing; yet, it has long been thought to be inefficient due to the thermodynamic unfavorability of operating the exothermic oxidation reaction at higher temperatures. Here, in this work, we show that this setback can be overcome with iron aluminate-based spinel solid solutions that preferentially exhibit large changes in oxygen content within the range of oxygen partial pressures expected in large-scale systems. We explain the experimental results with a defect model that assigns cation – not oxygen – vacancies as the predominant point defect responsible for their superior water-splitting ability. When operated isothermally at 1400 °C, the iron aluminate-based materials demonstrate a capacity for hydrogen production greater than 500 μmol g–1 and, as a result, remain viable even under high conversion conditions (i.e., pO 2 < 500 : 1 H 2 O : H 2 ), exceeding the hydrogen yields of ceria and two attractive perovskite candidates following a 400 °C (or less) temperature swing. Isothermal water splitting using iron aluminate-based materials opens the door for more simple, robust, and efficient production of renewable hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evaluating Materials Design Parameters of Hole-Selective Contacts for Silicon Heterojunction Solar Cells

Silicon heterojunction (SHJ) solar cell efficiencies are limited by parasitic absorption from the hydrogenated amorphous silicon (a-Si:H) front contact, but this may be mitigated by selecting an alternative carrier selective contact material with a wider band gap. When choosing such a material as the hole-selective contact (“p-layer”), the alignment of the material's valence band edge energy (E VB ) with that of crystalline silicon (c-Si) is an important criterion, but several other material parameters can also influence the band bending at the contact interface. Here, we simulate an (n)c-Si/(i)a-Si:H/p-layer interface to explore the influence of six materials parameters in a variable p-layer on the SHJ performance. We find a strong influence on the fill factor (FF) from thickness, doping, and E VB , and on V OC from the interfacial defect density; notably, optimal E VB is ~ 0.1 eV higher than the valence band edge energy of a-Si:H. Multiparameter sensitivity analyses demonstrate how performance is simultaneously influenced by E VB and doping; thus, both parameters should be optimized alongside one another. To assess the influence of these parameters experimentally, we grow p-type NiO x as a test-case p-layer, which shows that FFs decrease with the oxygen content likely from the increased misalignment of E VB . Although modest efficiencies are achieved experimentally (>7%), what is important is that our model simulates performance trends. With these results, we apply a materials discovery pipeline to suggest new materials (e.g., ZnTe and BeTe) to try as p-layers in the SHJ. This combination of simulations, experiments, and materials discovery informs a better understanding of contact selection in SHJ cells.

14 SOLAR ENERGY↗
DOE OSTI2025

pnnl/Rooftop-Unit-LCI-Template

A content repository for the life cycle inventory (LCI) rooftop unit (RTU) data collection template, a data collection template for the linked openLCA model Life Cycle Assessment (LCA) for automated Environmental Product Declaration (EPD) results generation.

Unger, Scott [Pacific Northwest National Laborator↗
DOE OSTI2024

Radioisotope Identification with List-Mode Gamma Ray Data: A rigorous assessment on the value of temporal information applied to radioisotope identification.

This work explores the potential of utilizing temporal data from gamma-ray detectors, known as list-mode data, to enhance radioisotope identification. Traditional identification methods, which rely on full gamma-ray spectrum analysis, often require long dwell times and struggle with “confuser” sources, or spectra with similarly spaced spectral peaks. We hypothesize that by leveraging the probabilistic nature of nuclear decay and the time-encoded information from decay sequences and interactions with surrounding materials, we can improve classification accuracy over static spectral analysis. This research rigorously examines the temporal content of list-mode data through exploratory data analysis via correlation discovery and information theory. We further propose a basic classification model that can utilize spectral or temporal data (or both) to determine if the incorporation of temporal information can improve radioisotope identification. The findings suggest that the temporal information present in list-mode gamma-ray data has merit and should be further investigated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Optimization of the Post-Operational Phase on Two Belgian Multi-Unit Nuclear Power Plants: the Case of the Non-Fissile Irradiated Core Items - 20156

The current legal framework in Belgium foresees the progressive phase out of nuclear power between October 2022 (Doel 3) and December 2025 (Doel 2). Upon its definitive shutdown, each unit of the Tihange and Doel sites will enter a Post-Operational Phase (POP) and be prepared for its Decontamination and Decommissioning (D and D). Prior to obtaining the D and D license, the Operator Electrabel is legally required to remove any non-fissile irradiated core items stored in the deactivation pools. The non-fissile irradiated core items consist essentially of control rods, poison rods and source thimbles as well as thimble plugs and foreign materials irradiated during operation: - Their significant content in highly radiant radionuclides (up to 6 TBq of Co-60 per kg of irradiated material) renders all existing operational waste management processes inadequate due to insufficient biological shielding; - Their high concentrations in long-lived radionuclides call for their disposal in a geological repository for which no final design nor waste acceptance criteria are expected prior to 2050. Uncertainties in the Belgian energy supply and security, however, require the Operator to be prepared for a partial nuclear phase out, where one or more units would benefit from lifetime extension while the remaining units would undergo decommissioning. The present paper aims at presenting how Electrabel, in partnership with Tractebel, addressed this challenge by maximizing the use of synergies within the respective sites as well as between both sites themselves, all the while accounting for site specificities. The most recent results and state of progress of the project will be detailed and the first lessons learned will be shared. The project has been split in multiple tasks and phased as follows: - An inventory phase aimed at mapping the contents, origin, composition and history of the non-fissile irradiated core items; - A pre-characterization phase based on neutron activation models; - A waste sorting phase aimed at separating waste forms for which an evacuation route exists from those for which such route does not exist; - A feasibility phase aimed at exploring all possible scenarios for the management of non-fissile irradiated core items and identifying the optimal feasible solution for each site; - A preparation phase (currently ongoing), developing further the optimal solution and ensuring that back-up solutions are available for any foreseeable change of context (licensing issue, modification in the nuclear phase-out program, etc.) and initiating early contacts with potential subcontractors for segmentation works and cask manufacturers, as well as the Belgian regulatory body and waste management agency. This phase also foresees the investigation of destructive and non-destructive radiological measurements to support the detailed characterization of the waste forms; - A realization phase (future work). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Evaluation of Copper Chelation Therapy in a Transgenic Rat Model of Cerebral Amyloid Angiopathy

Cerebral amyloid angiopathy (CAA) is characterized by the accumulation of the amyloid β (Aβ) protein in blood vessels and leads to hemorrhages, strokes, and dementia in elderly individuals. Recent reports have shown elevated copper levels colocalized with vascular amyloid in human CAA and Alzheimer’s disease patients, which have been suggested to contribute to cytotoxicity through the formation of reactive oxygen species. Here, we treated a transgenic rat model of CAA (rTg-DI) with the copper-specific chelator, tetrathiomolybdate (TTM), via intraperitoneal (IP) administration for 6 months to determine if it could lower copper content in vascular amyloid deposits and modify CAA pathology. In this work, results showed that TTM treatment led to elevated Aβ load in the hippocampus of the rTg-DI rats and increased microbleeds in the wild type (WT) animals. X-ray fluorescence microscopy was performed to image the distribution of copper and revealed a surprising increase in copper colocalized with Aβ aggregates in TTM-treated rTg-DI rats. Unexpectedly, we also found an increase in the copper content in unaffected vessels of both rTg-DI and WT animals. These results show that IP administration of TTM was ineffective in removing copper from vascular Aβ aggregates in vivo and increased the development of disease pathology in CAA.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Uncertainty of SW Cloud Radiative Effect in Atmospheric Models Due to the Parameterization of Liquid Cloud Optical Properties

Clouds are largely responsible for the spread of climate models predictions. Here we focus on the uncertainties in cloud shortwave radiative effect due to the parameterization of liquid cloud single scattering properties (SSPs) from liquid water content (LWC) and droplet number concentration (N), named parameterization of cloud optical properties. Uncertainties arise from not accounting for the droplet size distribution (DSD)—which affects the estimation of the effective radius (r eff ) and modulates the r eff -dependency of the SSPs—and from averaging SSPs over wide spectral bands. To assess these uncertainties a series of r eff -dependent SSPs parameterizations corresponding to various DSDs and spectral averaging methods are derived and implemented in a radiative code. Combined with the DSD-dependent estimation of r eff they are used to compute the bulk radiative properties (reflectance, transmittance, absorptance) of various clouds (defined in terms of LWC and N), including a homogeneous cloud, more realistic case studies, and outputs of a climate model. The results show that the cloud radiative forcing can vary up to 20% depending on the assumed DSD. Likewise, differences up to 20% are obtained for heating rates. The estimation of r eff is the main source of uncertainty, while the SSPs parameterization contributes to around 20% of the total uncertainty. Spectral averaging is less an issue, except for atmospheric absorption. Overall, global shortwave cloud radiative effect can vary by 6 W m –2 depending on the assumed DSD shape, which is about 13% of the best observational estimate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Detecting forest response to droughts with global observations of vegetation water content

Droughts in a warming climate have become more common and more extreme, making understanding forest responses to water stress increasingly pressing. Analysis of water stress in trees has long focused on water potential in xylem and leaves, which influences stomatal closure and water flow through the soil-plant-atmosphere continuum. At the same time, changes of vegetation water content (VWC) are linked to a range of tree responses, including fluxes of water and carbon, mortality, flammability, and more. Unlike water potential, which requires demanding in situ measurements, VWC can be retrieved from remote sensing measurements, particularly at microwave frequencies using radar and radiometry. Here, we highlight key frontiers through which VWC has the potential to significantly increase our understanding of forest responses to water stress. To validate remote sensing observations of VWC at landscape scale and to better relate them to data assimilation model parameters, we introduce an ecosystem-scale analogue of the pressure-volume curve, the non-linear relationship between 44 average leaf or branch water potential and water content commonly used in plant hydraulics. The 45 sources of variability in these ecosystem-scale pressure-volume curves and their relationship to 46 forest response to water stress are discussed. We further show to what extent diel, seasonal, and 47 decadal dynamics of VWC reflect variations in different processes relating the tree response to 48 water stress. VWC can also be used for inferring belowground conditions – which are difficult to 49 impossible to observe directly. Lastly, we discuss how a dedicated geostationary spaceborne 50 observational system for VWC, when combined with existing datasets, can capture diel and 51 seasonal water dynamics to advance the science and applications of global forest vulnerability to 52 future droughts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Muonic force behind flavor anomalies

We develop an economical theoretical framework for combined explanations of the flavor physics anomalies involving muons: (g - 2) μ , R K(*), and b → sμ + μ - angular distributions and branching ratios, that was first initiated by some of us in ref. [1]. The Standard Model (SM) is supplemented with a lepton-flavored U(1) X gauge group. The U(1) X gauge boson with the mass of O(0.1) GeV resolves the (g - 2) μ tension. A TeV-scale leptoquark, charged under the U(1) X , carries a muon number and mediates B-decays without prompting charged lepton flavor violation or inducing proton decay. We explore the theory space of the chiral, anomaly-free U(1) X gauge extensions featuring the above scenario, and identify many suitable charge assignments for the SM+3ν R fermion content with the integer charges in the range X F i $\in$ [-10, 10]. We then carry out a comprehensive phenomenological study of the muonic force in representative benchmark models. Interestingly, we found models which can resolve the tension without conflicting the complementary constraints, and all of the viable parameter space will be tested in future muonic resonance searches. Finally, the catalog of the anomaly-free lepton-non-universal charge assignments motivated us to explore different directions in model building. We present a model in which the muon mass and the (g - 2) μ are generated radiatively from a common short-distance dynamics after the U(1) X breaking. We also show how to charge a vector leptoquark under U(1) μ-τ in a complete gauge model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗